Location of margins of installation

Similar Questions

• I have problems with downloading the Lightroom app! What is the location of the appropriate installation?

  I have problems with downloading the Lightroom app! I have already many programs Adobe works on my PC and I have a cloud of Adobe license. But now, with the installation of Lightroom, I get the following error:

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DF014...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s)

  -Payload: Adobe Lightroom 6.0.0.0 {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}.

  ERROR: DF014: unable to create the symbolic link to ' \\XC-DC-01\Users\Patricia\... \Desktop\Adobe Lightroom.lnk "(Seq 6641).

  When I go to the solution, then it says: rerun the installation. Select a different installation location.

  
  

  But I tried to select all the other folders on my computer for the last two weeks and it still not working? Update other programs is not a problem, then I don't understand what goes wrong? What is the location of the appropriate installation? Why it changed on my computer?

  Can you help me with a solution? Thank you!

  Hello

  Please see Exit Code 7 Installing and errors ' Exit Code: 6 "," Exit Code: 7 "|"» CC, CS6, CS5.5

  Hope that helps!

  Kind regards

  Sheena

• Receive error message when you install Windows 7 "Windows Setup cannot find a location to store temporary installation files.

  * original title - Windows Setup is unable to find a place to store temporary installation files. To install the winds make a partition on your startup disk has at least 686 MB free space *.

  Current operating system: Windows XP SP 3

  Windows 7:32 - bit Premimum Family Pack upgrade

  Hardware: Dell dimension 3000

  I read a number of different solutions for this problem.  None have worked.  I have 25 GB of free space on my C drive.  I formatted a dvd using the tool to download Windows 7 USB DVD.

  I ran sfc/scannow to repair system files

  I ran the suggestion to start installing from a command using D:/setup.exe /tempdrive:c window - it did not work.

  Does anyone have any other suggestions on how to perform this upgrade?

  Try these suggestions:

  Error 0 x 80070005 occurs if the upgrade doesn't have permission to the folder writecertain. Try the following steps:

  Reset permissions
  ============

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:

  off @echo

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause

  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
  8. you will see a window of type BACK treatment.

  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  If the same thing happens, move to the next step.

  Run the upgrade by using the built-in Administrator

  ================================

  1. click the button start-> all programs-> Accessories.

  2. right click on command prompt and select "run as Administrator".

  3. click on continue when user account control window appears.

  4 copy the following command and press ENTER:

  NET user administrator / Active: Yes

  5 restart the computer and then log on the computer of this administrator account.

  6. run the upgrade to windows 7.

  Error code 0 x 80070005 usually indicates that you don't have enough privileges or the operation is blocked. I know, some programs (Boot Camp on a Mac PC, etc.) is not compatible with Windows 7, if you have installed these programs on the computer, you may not be able to perform the upgrade.  You should uninstall these programs before upgrading. In addition, such a question may be related to UAC, I recommend you turn off UAC in Windows Vista, if you have installed security software, try uninstalling the security application as well.

  BTW, for your references, I found similar questions:

  Windows could not create a required installation folder. Error code: 0x80070005
  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/d04e9cf3-3eae-4A1F-a9f8-e2c5ed88d183/

  "Cannot create file" error when you try to install Windows 7
  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/3621e8cf-B2CE-479b-BEAC-08acc435a856

  Error 0 x 80070005 when upgrading to windows 7 from vista
  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/08986904-c822-4801-95a5-55ddd5aadcea/

  See also:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/cb679e27-f2e6-4CD5-b708-a4992cec5a9d

  CREDIT: Dale Qiao Microsoft, host and cdobbs releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Re: Lightroom installs to the default location despite the specific installation sheet set in the application manager.

  Hi, I still have problems with the latest version, it will not use the custom folder that I configured in CC. Lightroom and PhotoShop fails during installation. No useful information or messages!

  Why can they do that work when they took the option available?

  And even begins to LR install to the default location, even before you are able to set your favorite place!

  I have an SSD with limited space and will use instead my 3 TB drive!

  Hi, all set, finally!

  I tried to use a logical disk that has been set up on Windows on Windows Storage 8.1, which had the REFS not usual NTFS file system. And that supports case-sensitive file names, but it does not use it! If Adobe it checks and will not be installed.

  Simply, I created a new volume on the same drive with NTFS and Lightroom and PhotoShop now installed there!

  Despite Adobe claiming still LR stat must be installed on the default drive (which is not true!)

• Lightroom installs to the default location despite the specific installation sheet set in the application manager.

  Lightroom guard installation to the installation location by default, even if I have a specific installation location defined in the application manager. Y at - it a fix for this problem?

  Members of this discussion, we have provided documents about the inability to customize the installation location of Lightroom.  Please see the Lightroom Creative Cloud FAQ - http://helpx.adobe.com/lightroom/kb/lightroom-creative-cloud-faq.html#id_95665.

• could not access network location problems in the installation of nba 2 k 12

  pls help! i manually uninstalled my nba 2 k 12 manually deleting the folder tne itself... I want to install it again... problem now it is always say "could not access network location"... pls guys I need of your help... I'm using windows 7, 64-bit... tnx

  Hi Raymetalgear,

  It seems that the game is not uninstalled properly. I suggest to delete the game Application Data folder NBA2012 folder and try to reinstall.

  2012 NBA record will be stored in the following location:

  %USERPROFILE%\Local Settings\Application Data\ NBA 2012

  Let us know if that helps.

• Locate the folder of installation of an installation of AMS

  Does adobe have any documentation for the installation of the Adobe Media Server on Windows? We saw this https://helpx.adobe.com/adobe-media-server/install/install-media-server.html , but after the installation, we can not find it.

  Also is there any documentation or explanation on what it installs exactly and where?  After that we ran the installation and find the rootinstall folder, that he was not there even if there are no errors during installation.

  Thank you

  Installs by default in C:\Program Files\Adobe\Adobe Media Server 5

• Location of download full installer V12.0.2

  Hello

  This link http://www.adobe.com/shockwave/download/alternates/#sp is administered by the link to download the latest full installer. However, the link lists only Shockwave Player V11, not 12. Is there a more recent link or updated?

  Thank you

  Stem

  This link always points to the latest version (Windows):

  http://fpdownload.Macromedia.com/get/Shockwave/default/English/win95nt/latest/Shockwave_In staller_Full.exe

• Please select another location to extract the installer to

  At first I even if it's a Vista issue, but happens on XP. I downloaded both the trial and the editions of Dev (seem to be the same) and after initial extraction I get "Please select another location to extract the Setup program to: Thoughts. I am administrator on both systems. I would really like to experience 8.

  you mean like in this technote here? ;)

  http://KB.Adobe.com/selfservice/viewContent.do?externalId=f8582407&sliceId=2

• During the installation of Windows 7, cannot find the location to store the files for installation of profit. Error code 0 x 80070490

  When I try to install the windows operating system 7 in my pc. installation of window cannot find a location to store temporary installation window installation files to ensure that a partition on your startup disk has at least 686 MB of free space - error code 0 * 80070490.   Please tell me how to solve this problem?

  If you have any non essential devices connected to your computer such as external hard drive, USB stick or micro-SD memory card, unplug them, they might interfere with installation.

• How do I know which programs to take off the windows Installer CleanUp list?

  Windows Installer Cleanup of

  * original title - how do I know which programs to take off the windows Installer CleanUp list? I don't want to uninstall or remove a program that I always use currently__ *.

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301 (MS Office only - replaced by the 'Fix It' utility)
  (Note: the Windows CleanUp utility has been replaced by the "Fit It":http://support.microsoft.com/fixit/ )

  The Windows Installer Cleanup utility:
  It was created to correct software installations that failed during the installation process and leaving a bunch of files (including a file name that ends with an extension .msi (= MicroSoft Installer .msi). For example an installation failed MS Office (note I said "failed").
  See: http://office.microsoft.com/en-us/help/HA011185721033.aspx

  Also if when you installed MS Office you decided at the time you had no need of Power Point and chose not to install it. You find out later you need to make a Power Point presentation, insert the Office CD and try installing PowerPoint and it causes an error.

  The tool using Windows Installer Cleanup will remove damaged installation files (located in C:\Windows\Installer). You then install Office and Power Point, once more, as they are not more present in the list of programs in the Add/Remove Control Panel. But at least this time Office and Power Point will install without errors as the Windows Installer Cleanup utility did what it was designed to do.

  The unfortunate side effect of the cleanup tool is when you select and delete software that works correctly you then will no longer be able to install this software because it is no longer in the Add/Remove Programs list.

  Now as to why there is so many files in the C:\Windows\Installer:
  You will find lots of them. MSI files belong to software such as Java, Microsoft .NET Framework software AV, Norton Ghost, file downloaded during a Windows Update session and so on. It would seem that some software will clean up after itself and deletions, this is the file that were in the folder C:\Windows\Installer. Windows Update failure will create and leave the folders and files behind every time that you try to install the update and so you could end up with a large number of files taking up disk space.

  It could also be a lot of files (is most needed) orphans.
  If you still have the original Windows Installer Cleanup utility, and then by using the msizap (msizap g!) command removes all cached Windows Installer data files that have been orphaned.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• HP officejet 4500 G510n french: installation of the HP officejet 4500 G510n wireless failed

  The first phase of the installation process I get the attached window:

  Regarding other devices I don't face any problem USB.

  I checked all the USB drivers on the list of devices.

  I wonder why I got this message because I do not wish to install via a USB line but wireless. I checked that the printer has been connected with my DELL lattitude e5570. Feel secure by the driver windows is no problem.

  What do I do to solve this problem.

  

  Hello

  In Windows Explorer, type % temp % and press ENTER.

  Locate and open the installation folder of HP, which begins with 7z (e.g. 7z1234s) or appears as hp.

  Open the installation folder.

  Find the usbready.exe file and rename it usbready1.exe.

  Now browse a level upwards and press Setup.exe to begin the installation, and then follow for the difference.

  Please let me know of any problems,

  Shlomi

• Installation of a dual boot for XP on a Vista - XP installation computer forget the SATA drive after restart required #1

  Hello

  I'm trying to set up a dual-boot XPpro on my Vista machine.  I found the instructions detailed at various locations.  I prepared a score of 30G on my SATA drive and booted from my XPpro and XPpro (SP2) retail drives.  The score is quite small because I have only use for some applications.

  I have the following problem and I wonder if anyone can help.  The disk and partition is by my SP2 disc, but it's ok that BONE is not used on any other machine.

  I can choose the new partition as the location for the new installation of XP.

  Installation gets to the point where the first reboot is required, then at startup, I'm stuck on the option 'press any key to boot from the CD-ROM.  I assume that the reader is not detected.  If I try to start from scratch, I get the warning that the new partition already has an operating system on it, but I can reformat and move forward, then arrive at the startup problem re.

  There is no XP drivers for my Board, but I can not install them because they are on CD and the only option to load the specific drivers in the first part of install required has a diskette is in the drive, and of course I don't have a floppy drive.

  I then use the Startup Repair in Vista I can't move to the stage where XP is installed in fact correctly.

  Any help very welcome!

  Paul

  Hello

  I made a disc of slipstream with nLite as suggested, my sata drivers included but still could not circumvent this problem.  Installation kept insisting that they had to come from A:

  Rather than taking the box to bits I read from the link posted by Michael Murphy, once again and found the answer of Taydius on 250/1 posts.

  http://www.syschat.com/dual-boot-Vista-XP-Vista-already-26-1946.html

  Problem solved by installing EasyBCD in Vista, it points to the new partition with the inaccessible XP and reboot and selection, installation on board as usual.

  Dual boot now works fine.

  Thanks for the help!

  Concerning

• get error 0 x code 80300001 windows cannot install on the specified location

  try to install vista on a new hard drive on my computer laptop hp dv6810, but get the error code 0 x 80300001. Windows cannot install to the specified location.

  the installation program recognizes my hard drive, we'll format me and partition but will not be installed. im not that well informed about computers then be simple and detailed with your answer. Thank you.

  Hello

  (1) you are able to change the settings in the BIOS?

  Check the below link that can help you in the matter of fixing.

  http://support.Microsoft.com/kb/925481

  Also to ensure that material supports the installation of Windows Vista on your computer.

  Hope this information helps.

• nVidia Driver Update: "Invalid access to memory location" error

  Recently, I noticed that nVidia had updated the drivers for my GeForce 440. When I tried to install, I got an "invalid access to memory location" error and the installation failed. I thought that I still had operational drivers, then I would understand later.

  Three nights ago Windows Update took on himself to try the update for me. He uninstalled the driver with success (which I didn't have to do it because of the above error), but has no installation. Following manuals to install attempts have also failed.
  Looking at the window control panel programs and features shows that older drivers seem to be installed, but don't work do not. Also, attempts to uninstall fail with the same error.
  Because I reinstalled Vista during the summer, and made no significant changes since then, I don't have a system restore point. Careless of me, I know, but that's it.
  Is it possible to solve this problem short even after reinstall Vista or should I resign myself to a day and a half of reupdates?

  Hello SudroBrown II,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, it looks that you are having problems with the Nvidia graphics card. "As I understand it, you get an error message" invalid access to memory location "when you install drivers Nvidia GeForce 440.

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Answer to us if you are having problems with the graphics card or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.