HP officejet 4500 G510n french: installation of the HP officejet 4500 G510n wireless failed

Similar Questions

• The Installation of the Adobe Extension Manager CS6 update failed. Error code: U44M1P7

  MacBook Pro 15 "retina mid 2012, 2.6 GHz Intel Core i7, 8 GM 1600 MHz DDR3, 512 GB SSD

  Tried twice, the same results.

  There are a few discussions on this error message. Have you tried referring to:

  http://forums.Adobe.com/message/4678681#4678681

  http://forums.Adobe.com/message/4752417#4752417

  http://forums.Adobe.com/message/4619889#4619889

  http://forums.Adobe.com/message/4678681#4678681

  Thank you

  Nikhil

• OfficeJet 4500 G510n Wireless: USB Incompatible

  I recently bought a new Asus computer and cannot install my laptop wireless officejet printer 4500.

  During the installation of the drivers, he suddenly stops to tell me that my USB and USB hardware driver is not compatible, I find it very hard to believe.

  I tried to use the HP scan doctor, HP support assistant, and looking at this forum.

  I am running Windows 7 and meet the minimum requirements of the printer. The printer works fine on Macbook Pro my wife.

  I tried to install the wireless drivers and tried to connect the printer via the usb port. All diagnostics and controls see the printer connected to my network, but the installation will not end.

  Any help would be greatly appreciated.

  Hello

  Sorry for jumping, as it appears from the error checking of the system, by selecting any type of prior connection.

  The problem occurs as a result of the USB 3.0 card which was made years after the HP software.

  Please follow these steps to install the HP software:

  Click the Start button and type folder in the search bar, then open the Temp folder indicated.

  Open the last installation folder that begins with 7z (e.g. 7zs1234) HP or HP folder and then open the folder that is listed under the name of your printer.
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) or HP > YOUR printer model and launch the Setup.exe file.

  Now follow the installation and check for the difference.

  Kind regards
  Shlomi

• HP officejet 4500 g510N Wireless does not scan full page

  I have a HP officejet 4500 g510N wireless and feels to lose on the first inch of each document that scan scan. I ran printing HP and doctor Scan with the same result.

  Someone at - it other ideas on what I need to do to fix this?

  This problem seems to be resolved by the power off, unplug the power cable, and then restart the device.

• recovered XP (fully updated) will not complete installation of the software of HP officejet j6480

  The test report of wireless since installation of the printer indicates everything should be good, however, the installation of the officejet software never ends siaying may not detect the printer wireless. The test report the router and the printer are okay.

  I did not use to have Avast! Kaspersky Anti-virus when this same problem (pc recovery and al.) who has spent 9 months ago.

  My Fios Actiontec router shows the printer on the WiFi network is-, but it does not print!

  Hello

  Try to install the drivers of printer using DVD connected via a cable, and then try to configure the same wireless network.

• HP Director launch even after the installation of the updated software. HP Officejet 5510.

  Problem launching HPdirector even after the installation of the updated driver.  Also not scan; message machine wants software installed.  Did not have this right?

  Any ideas?

  [Personal information]

  Hello drudgedread

  Follow the steps below and let me know what happens? These instructions will be clean your temporary folder (a folder that contains temporary data such as data configuration / installation) and rub the printer software with the most recent uninstall.bat utility for your printer.

  First step: clear temp directory
  Type %temp% term or search programs and files of field
  Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  Proceed to step 2 below
  Second step: downloaded and extracted to your system:
  1 download the drivers and full software features
  Complete features Officejet 5510 software
  2. once the download is complete, double-click the file to extract the software.
  3. when the installation window opens, press the Cancel button to stop the installation
  4. tap folder in the race or search programs and files of field
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. right click on the folder and select copy
  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.
  8 open the 7z, that you just copied on your desktop
  9 open the Util folder
  10 open the CCC folder
  11 start the uninstall_L4
  12. once the uninstall is complete, restart the computer
  13. run disk cleanup from the tools Accessories\ system under all programs folder
  14. download and install the latest version of Adobe flash player
  Adobe Flash Player
  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan? Also, if there are errors or messages just them down and let me know.

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Installation of the printer driver Officejet G85 fails with the message "print processor does not exist" with Windows 7

  The site compatibility Windows 7 says that this OS is compatible with my Officejet G85 all-in-one old.  Whenever I try to add this printer is using the automatic functions or manual installation of the driver fails and I get the error message that "print processor does not exist.  I tried to install the original with the most recent compatibility software is Windows 2000, but Windows 7 does not allow indicating that the program already exists and I have to uninstall it first.  However, I can't find it listed anywhere for uninstall it, and the original software disk does not have this feature either.  HP does not support printer and would not help provide.  This printer worked perfectly with Windows XP and we really like it is equipped.  Please help us raise this printer up and running with Windows 7 64 bit home edition.  I tried things I found that it was similar in the forum with no success so far.

  Hello

  You can run the printer troubleshooter. Convenience store solves some common printing problems.

  If your computer has problems printing, try using the printer Troubleshooter to solve the problem. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  Reference:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  See the following articles from Microsoft for more information on installing a printer or driver printer:

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  If the problem persists, you can contact the manufacturer of the printer for more information.

  http://WWW8.HP.com/ca/en/support-drivers.html

  Hope this information helps.

• OfficeJet Pro 8000: installation of the driver wireless Officejet 8000 Pro says default gateway is 0.0.0.0

  I'm chasing a well-documented problem of my printer lost network connection after a variable period of printing to do not. The only way to connect is to change the power supply, but the printer may take 5 minutes to blow and grunts until it settles and prints...

  I put a static IP address on the printer (10.0.0.250) as well as an empty default gateway successfully, and the documents are printed after 5mins of blowing and grunting (save the regular lost connection which I'm hunting...).

  I put what I thought has a static IP address on the router to match (see image below), but now I don't know if it was necessary, and if the 'hosting of the fixed DHCP server' is correct. It might be useless and missleading...

  Using the configuration of the printer to 10.0.0.250 interface, it seems to accept the installation of the network when the default gateway is blank. With the help of 10.0.0.2 caused the 'page not found' error in my browser (Chrome).

  However, when you try to reinstall the drivers, the installer has grumbled to the default gateway is set to 0.0.0.0, which currently is the only way it will work...

  The Win7 PC is plugged into the router.
  The printer wireless to the router.

  ipconfig on the pc gives Ethernet card details below.

  So basically I have no idea what I'm doing...!

  ==============

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Link-local IPv6 Address...: fe80::c8e1:63ef:85e0:7 24% 13 c.
  IPv4 address...: 10.0.0.249
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 10.0.0.2.

  Router config.

  

  Thank you for your comments. It seems that I solved the problem of the default gateway. Time will tell if the remains of the printer connected through long periods of no use (see update below).

  It seems that the configuration of the router of the "DHCP fixed existing host" has nothing to do with the device assigned a static IP address. In fact, it seems that this setting prevents the printer through a default gateway of the router address.

  I noticed that when you give the PC a fixed IP, it connected through the router without any other configuration of router. If I reasoned that it may be applied to the printer also, so I moved the printer 10.0.0.251 and Bingo! the default gateway can be set to the IP address of the route.

  Since then I downloaded to other updates, which is supposed to correct the common problem of wireless printers, loss of the connection.

  I'll try to report in the next few weeks an update about the stability of connection network printers.

  UPDATED: May 23, 2016

  And more of the foregoing, my router support suggested I increase a parameter "timeout" from 24 hours to 10 days. I did it more than a week. Today, the printer worked after the impression of not for about 5 days

• Satellite U200: Home WXP - installation of the other language

  I saw a good deal on a Toshiba Satellite U200 and want to buy, only problem is the Windows XP Home comes with, it is in French, and I want an English... OK, I have one English here, so I can activate it, but I was wondering if I can just install the English version and remove the French class. Do I have to re - install all drivers and stuff?
  If so, I can find them on the Internet from Toshiba site?

  Thanks in advance.
  Greetings, ' pimpin :)

  Hello

  If you want to use the Windows in English then you definitely install this OS in the English language.
  Then you have two choices. Either you want to use only a single OS on the HARD drive and install Windows in English on the existing French operating system partition you will create a second partition and install the English Windows as the second operating system.

  After the installation of the OS, you will need to install the drivers of Toshiba and utility in the right order if you want to use the features of Toshiba laptop together.

  The necessary drivers, you can find the Toshiba site

• installation of the software of the printer for my printer in windows 8.1

  My computer crashed and I need to do a factory restore I did successfully a few weeks before and when you are prompted in the installed updates Windows 8.1 (I was already on Windows 8.0). I installed all my software with success except the complete software and drivers for my HP Officejet 6500 e709n wireless. I downloaded this in 'download' for HP.com, no problem, however, when I try to run the program, I can't get to the extent where to extract the files. They extracted, but nothing happens after that. I looked on this website and generally in line, tried everything imaginable, but still no luck.

  I can print but I cannot use the scanner and really this need.

  I have since the pnp (Plug & play) for the printer is missing any ideas where I can find it.

  Hi anotherangel

  Sorry, it's so frustrating.

  I have provided a few steps by which you can try to see if you can get the printer working on the Win 8.1.

  Run all windows updates.

  Here is a url to temporarily disable all the startup programs to see if one of them is causing problems.
  http://winsupersite.com/Windows-8/Windows-8-tip-manage-startup-applications

  You must follow the same steps to enable all again when you have finished the installation and testing of the printer.

  Here is a document to restart the spooler to print on 8 to win.
  http://www.Samsung.com/us/support/howtoguide/N0000192/9811/116618

  When running the installation right-click on the installation and run as administrator.

  I am including a document for the progress bar on the Software Installation stops or stalls.

  http://support.HP.com/us-en/document/c00836418

  Let me know if it helps.

• get the status of 4500 printer wireless hp envy line after changing the wireless router.

  I use 8.1 window and I want to HP 4500-e printer all in one and all a works very well. My wireless router was going bad, so I replaced it. After the installation of the new router and get all my computers and devices (including the hp 4500 wireless printer) connected to the new network, I tried to print. The printer is waiting to print which was sent to her, but its status is set to offline mode. The box in the sign that says "set printer to run in offline mode" is not checked. but the status says HP ENVY 4500 SERIES (NETWORK) - in offline mode.  Anyone else has this problem and do you know how to solve this problem. I tried to turn off the computer and the printer and restarting their and running a hp Diagnostics program, but he says that everything works fine.

  Replacement of your wireless router try now.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• HP Officejet E709a Windows XP fail to install the photosmart software, failure to scan

  HP Officejet 6500 E709a reinstalled on my XP. First part was OK.
  that elevation fax was okay too, fax test passed.
  Problem was with photosmart.
  On the main installation window when I select install several software then Photosmart Essential 3.5.
  Installation with programmable buttons popup window empty. Click on them anyway, popup error message.
  Error massage window was called:

  "\Locals~1\Temp\HP\OJ6500vE709_full_en\Setup\hpzprl01.exe Preloader" m. "

  error text was

  the coannot system find the specified file

  But the file is here à...\Locals~1\Temp\HP\OJ6500vE709_full_en\Setup\hpzprl01.exe
  I can see it, 396 KB version 12.0.0.85

  Relocation came after installation of the graphics card NVidia Geoforce GT 630
  with 340.52 - Office-winxp-32-bit - international.exe
  And also USB 3.0: Renesas Electronics.
  Graphics card is still on XP but USB3 was withdrawn prior to installation.
  I can't say whether problem is a result of the graphics card or install USB3
  but of course, they started after these facilities.

  Was clean before installation with \Locals~1\Temp\HP\,,\uninstall_l4
  Also the HP has been removed from c:\Windows c:\Program files, add remove program has been own HP
  \Locals~1\Temp was clean of any file and recycle bin has been emptied.

  I had the same photosmart failure with the new OJ6500vE709_Full_14.exe instalation file

  Please advice

  Thank you

  Hi @Yiftach

  I see that you are having trouble installing the software for your Officejet E709a on your Windows XP. I appreciate your efforts for a resolution of the problems so far, let't all of the steps described in the following document and see where we are. "Cannot install this hardware... The system cannot find the specified file. "Message appears on the computer in Windows XP during Installation of the software.

  Please let me know the results of these efforts. Thank you.

• Need help: Officejet 6500 E709n wireless installation

  After a month of successful use of the Officejet 6500 from my laptop (running XP Professional SP 3) wireless I suddenlly lost the connection. I have recently added a new software. I couldn't add the printer because it is not visible, even by using its IP address) to attempt to reinstall the drivers. I tried the original CD and both the full and scan and print install download options, both hang on to 94% full.  I used the HP help nothing works cat. The HP network diagnostic utility sees the printer and the fine network and does not indicate any problem. Yet, no installation or the HP Print diagnostic utility programs can see the printer.  I tried each facility several times, including repeat downloads. I am able to access the wireless printer from a Vista desktop and another laptop running Windows 7. The printer (and functions) works very well.  However, the XP laptop is my machine of the company, and I need it to work.  Any suggestions? Is there a way to install all the drivers without all the other stuff?

  If printing is all you need, then I can help you.

  1. Go to the printers and Faxes folder, and click Add a printer.
  2. Now select "Locally connected printer" and UNCHECK "automatically detect the device.
  3. Now on the next screen, choose to create a TCP\IP port for the IP address of the printer.
  4. On the next screen, you will be asked to select the driver. Click on the 'Disk' button, then browse and select the file "autorun.inf" of the printer installation disc. Now the printer driver appears. Go ahead and select it.
  5. Complete the add a Printer Wizard and try printing.

  I would like to know if it works.

• Exit 34 of Code during the installation of the first Pro CC 2015

  Hello, I am french, I cloud creative donwload and download ' first Pro CC (2015) ' (I don't have any purchase, just tested with demonstration) and stuck at 42% I contact support and I tested it (error "Failed to install" received during the installation of the application of creative Office Cloud) 3 solution, download always stuck at 42%. If you have a solution help me please, thank you.

  Yes I figured that, try the steps mentioned in the link I provided earlier, he shud solve the problem.