Location of problem at run time components

Hello

I have a list of GridFieldManager in the optimization of resources, and in each GridFieldManager 4 components are placed:

___________________________________

Robert BitmapField Label check box

___________________________________

Peter BitmapField Label check box

___________________________________

Hercules BitmapField Label check box

___________________________________

Check hot BitmapField Label box

Row labels are objective with the respective ID. Like (1, 'Robert', 'Label'), (2, 'Peter', 'Label'), (3, 'Hercules', 'Label'), (4, 'hot', 'Label'), etc.

Added all the boxes & all the runtime only. Boxes are registered in Cookie [with him] checks the object mentioned above.

I find problem in order to find the proepr fields. Sometimes something works sometimes it doesn't. Does not include or how to code for it. Once located properly I have to remove them. This part does not work properly. But the location more of 3 fields creates problems.

My code is:

    private void getListOfSelectedMails() {
        selectedMails = new Vector();
        for (int i=0; i < checks.length; i++) {
            if (checks[i].getChecked() == true) {
                MailMessage mm = (MailMessage) checks[i].getCookie();
                selectedMails.addElement(mm);
                System.out.println("Added " + mm.index + " To selectedMails vector");
            }
        }
        System.out.println("selectedMails Size = " + selectedMails.size());
    }

    private void deleteMails() {
        int fieldIndex;
        for (int i=0; i < selectedMails.size(); i++) {
            MailMessage mm = (MailMessage) selectedMails.elementAt(i);
            fieldIndex = (mm.index * 2)-1;
            if (i > 1) {
                if (i%2 != 0)   // Odd
                    fieldIndex = fieldIndex +2;
                //if (selectedMails.size() > 3) {
                //    fieldIndex = fieldIndex -2;
                //}
            }

System.out.println("i = " + i + " fieldIndex = " + fieldIndex + " Mail TO FInd = " + mm.from + " ,  " + mm.index);

if (inboxMsgs_vfm.getField(fieldIndex) instanceof GridFieldManager) {                GridFieldManager gfm = (GridFieldManager)inboxMsgs_vfm.getField(fieldIndex);                CheckboxField cb = (CheckboxField) gfm.getField(0);                MailMessage cb_mm = (MailMessage)cb.getCookie();                System.out.println("Mail Found = " + cb_mm.from + " ,  " + cb_mm.index);

                //inboxMsgs_vfm.delete(inboxMsgs_vfm.getField(fieldIndex));                //inboxMsgs_vfm.delete(inboxMsgs_vfm.getField(fieldIndex));                //invalidate();            }
         }
     }

The code above works perfectly selected 3 checkboxes:

selectedMails Size = 2
I = 0 fieldIndex = 3 Mail TO FInd = Peter, 2 Mail Found = Peter, 2
I have = 1 fieldIndex = 5 Mail TO FInd Hercules, Mail Found Hercules, 3 = 3 =

selectedMails Size = 3
I have = 0 fieldIndex = 5 Mail TO FInd Hercules, Mail Found Hercules, 3 = 3 =
I have = 1 fieldIndex = 7 Mail TO FInd hot =, 4 Mail Found hot =, 4
I have = fieldIndex 2 = 11 Mail TO FInd Silva, 6 Mail Found Silva =, = 6

selectedMails Size = 3
I have = 0 fieldIndex = 5 Mail TO FInd Hercules, Mail Found Hercules, 3 = 3 =
I have = 1 fieldIndex = 7 Mail TO FInd hot =, 4 Mail Found hot =, 4
I have = fieldIndex 2 = 13 Mail TO FInd = Robert D'Silva, 7 Mail Found = Robert D'Silva, 7

selectedMails Size = 3
I = 0 fieldIndex = 1 Mail TO FInd = Robert D'Silva, found 1 Mail = Robert D'Silva, 1
I have = 1 fieldIndex = 7 Mail TO FInd hot =, 4 Mail Found hot =, 4
I have = fieldIndex 2 = 13 Mail TO FInd = Robert D'Silva, 7 Mail Found = Robert D'Silva, 7

selectedMails Size = 4
I = 0 fieldIndex = 1 Mail TO FInd = Robert D'Silva, found 1 Mail = Robert D'Silva, 1
I have = 1 fieldIndex = 7 Mail TO FInd hot =, 4 Mail Found hot =, 4
I have = fieldIndex 2 = 11 Mail TO FInd Silva, 6 Mail Found Silva =, = 6
I have = 3 fieldIndex = 15 Mail TO FInd = Robert D'Silva, Mail Found Divas, 8 = 7

Tried to uncommentng the selectedMails.size () if & results:

selectedMails Size = 4
I = 0 fieldIndex = 1 Mail TO FInd = Robert D'Silva, found 1 Mail = Robert D'Silva, 1
I have = 1 fieldIndex = 7 Mail TO FInd hot =, 4 Mail Found hot =, 4
I have = fieldIndex Mail TO FInd Silva = 2 = 9, 6 Mail Found = Cool, 5
I have = 3 fieldIndex = 13 Mail TO FInd = Robert D'Silva, 7 Mail Found = Robert D'Silva, 7

You can see the size = 4 previous 7 SOPS was not avbl, after uncomment 4 is avbl but 6 not located correctly.

Can someone help me how to localize these fields correctly. Have tried many variations in the code, but nothing has worked perfectly for everyone.

Thank you

> fieldIndex = (mm.index * 2)-1;

It is very good for the 1st field. When 1 field is removed, as well as the added line is also removed. So here, if I have 5 rows then 5 + 1(on top) lines also, fieldCount total will be 11.

For this issue, fieldIndex = (mm.index * 2)-1;

does not provide correct results for all fields.

Peter, tried to add checkbox rather than MailMessage, but again without success. One or the other of the average index does not work correctly.

Tell me something, I may be wrong in one of the points that I GUESS,

After you have removed and calling invalidate() 1 rank and the next line of the optimization of resources whose index is 1 and 2, the line and the next line will be placed in the position of the field 1 and 2, right?
I use mm.index which is the question for the removal of several lines. Suppose that am abolition of the 1, 3, 4. Position of field for 1st row 1 & 2, 3rd row = 5 & 6, 7 & 8 4th. It's the resukt I am using the formula above for fieldIndex = (3 * 2) - 1 = 5. But when the 1st row is deleted, the index for the 3rd rank becomes 3 & 4 and becomes for 4 rows 5 & 6. This is wrong.

I follow something like the number of deleted rows

1st row = 1 & 2

3rd place - (3 * 2) - 1 = 5-2

Yes. I added a deletedFields field in deleteMails and on the deletion of a field add + 2 to the deletedFields.

To define fieldIndex perfect,

If (mm.index == 0)
fieldIndex = 1;
on the other
fieldIndex = (mm.index * 2) + 1;

If (deletedFields > 0)

fieldIndex = fieldIndex - deletedFields.

With that all the records are deleted properly without additional programming.

Earlier, when I started to code the GUI for I think that its not easy and the most appropriate Add Checkbox in ListField, with listener added to the box. How is that? Simon, your articles also shpwed me listener on the line field in the list complete and not only on the box. If you add the box to check for ListField with listener added to it and do not select the entire line, I would try to apply instead of what I had done so far.

Can someone tell me, is the highest point possible using ListField?

Thank you

Tags: BlackBerry Developers

Similar Questions

Unable to locate labview run time engine

Hi all

I have a problem while trying to run a simple labview software on a Tablet PC.

My development machine is under win 7 64 bit with labview 2010 sp1 10.0.1

My computer is a win 7 32 bit based tablet.

I installed labview runtime engine TEN 2011 standard 32-bit sp1 but I get the following text: «unable to locate labview run-time engine...» "

I tried to install sp1 64-bit of the 2011 standard RTE because one of the items suggested, but windows is not allowing to install 64-bit applications...

Should which version of the Runtime I install!

You did not say, but I'm assuming that you are using LabVIEW 2010 sp1 32 bit to develop and build the application.

You can include the 2010 sp1 Runtime when you build the Setup program, or you can download it (here) and install it separately.

(The runtime version must match the development system, so time to run from 2011 will not work. Even the 2010 (non - SP1) could cause problems)

Kobi Kalif wrote:

I tried to install sp1 64-bit of the 2011 standard RTE because one of the items suggested, but windows is not allowing to install 64-bit applications...

Can you tell me what position suggested to install an operating time of the wrong version of 64-bit. That makes no sense at all! Please provide a link.

(You can only install the runtime on a 64 bit OS, 64-bit, and he will agree only if the application has been developed in 64-bit LabVIEW to the same version.)

Satellite X 200 - 25 G: problem of Flash Cards - Run time error file TCrdMain.exe

Hello world!

I don't know how, but I have a problem when my windows Vista from (running)
The problem is with these file TCrdMain.exe this file is for Flash cards, end running every time when I put my PC on (with windows startup). But I see this problem: "Run time error file TCrdMain.exe ' and I should click Close.
I don't know where can I uninstall this program and when I find that driver (Software) (if I uninstall and then install this driver, maybe that everything will be OK). This is the main problem.

And another question...
There are so many programs with this computer (laptop), and if I want to install Windows XP for example, where can I find everything (each programs) there may be 10 or 15 pograms.

It will be a big problem if I change my OS. Y at - there a site where I can download, everything...
Thanks for the replies, nd sorry about my English :-) skills
Best wishes from the Bulgaria and have a nice day!

Post edited by: me

null

Hello

I'm not very well why the executable Run TCrdMain.exe error, but it is certainly up to Toshiba FlashCard software and the FlashCard belongs to the package Toshiba Vista added value m.

Kody is good. Reinstall the VAP and check if this helps solve this problem.

With regard to the question of the other;
You are right; the notebooks are preinstalled with many different applications. But it is necessary because the laptop supports many different features.
However, if you want to install XP OS on the X 200 PSPB9E series, you will need drivers Toshiba XP and all need Toshiba XP drivers are available on the European driver Toshiba page

You must install all the drivers available if you want to use all the features of the laptop.

Concerning

deploy the run-time engine

Hello everyone,

I'm trying to deploy my application of teststand to a target computer. My teststand application uses: TestStand 2014 (32 bit), LV 2014 SP1 (32-bit).

Here's the problem I encounter while using the deployment tool.

1. in the attempt to include RTE LV in my Installer, the deployment utility requires that I provided LV 2015 Installer. See the attached picture.

I wonder why she asked median LV-2015-64 bit Installer. If I ignore the request, the build process failed.

2. I use the shared variable to communicate with the compactRIO controller. The compactRIO controller is hosting EVS. My question is,

a. I have to "deploy" my variable library shared, even though my system is not an EVS?

b. I read in the manual that I can deploy the variable Fanny shared through the LV utility deployed the lilbrary step. So I added this step in the test sequence. Whenever I run the sequence, this step deploys the shared variables. On the target, I wonder if it is necessary to deploy the shared variable on each run of the test sequence. I think it should only be deployed only once on the system target. Am I wrong? If so, how to remove this utility LV deploy step of the library of the test on the target sequence, since there is no development testbed on the target system.

3. I use a database to record test results after each execution of test sequences. I can export the schema of the table data and copy it to the target computer. My question is, how to import the schema of the database in the target table, since there is no system development teststand on it (no way to call configure it-> result-> database to import the schema of the treatment table)?

I hope that teststand experts out there can give me some help tips to help me understand the whole deployment process. Thank you.

Yours,

lhuckj

(1) make sure that LabVIEW 2015 Run time is NOT slected to install options-> drivers and components

(2) I don't know

3.

Generally, I put my data link in a UDL file and include that in my distribution. I set the Connection string to use a relative to this udl path and make sure that the UDL is copied to the same location on the targer

I have also included in my repertoire of the Application of TestStand CFg:

TestStandDatabaseSchemas.ini

TestExec.ini

Users.ini

StationGlobals.ini (attention if you do not want to replace the existing one, I use it to store the addresses of the instrument)

LabVIEW: error building Installer 2011SP1: LabVIEW Run-Time Engine 2013 missing 3 dependencies?

I'm having a problem of construction of an installer in 2011SP1 of LabVIEW.

It has been a while since I tried to build an installer but it used to work properly and building executables still works fine.

Now when I try to compile the installer, I get "generation failed."

The possible reasons: error generating preview for my 3.1.7 Application.

Details:

Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:

CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_InitializeDistribution.vi >> IB_MSI.lvclass:Report_Preview_Error.vi >> IB_Source_Container.lvclass:Report_Preview_Error.vi

Loading product deployment information*** WARNING ***NI LabVIEW Run-Time Engine 2013 is missing 3 dependencies. This product, or other products that depend upon NI LabVIEW Run-Time Engine 2013, may not function properly while the dependencies are missing.  Visit ni.com/info and enter the Info Code "" for more information.

***************** Error: An internal error occurred for which the cause is unknown. (Error code -41)***************** Error Details:Error in MDF API function: _MDFCommon_GetNextLogMessageError in MDF::GetInstance - MDF static instance is not initialized!*** End Error Report**************

Loading product deployment information*** WARNING ***NI LabVIEW Run-Time Engine 2013 is missing 3 dependencies. This product, or other products that depend upon NI LabVIEW Run-Time Engine 2013, may not function properly while the dependencies are missing.  Visit ni.com/info and enter the Info Code "" for more information.

The really strange thing is that I'm using LabVIEW 2011SP1, I don't even have installed LabVIEW 2013, not even the runtime.

Where is the problem? Why is he still complain about LabVIEW 2013? Anyone seen this before?

Troy,

This behavior makes me assume that you updated certain components from the past. There are drivers of OR who use LV components (e.g., AFAIK the DAQmx of Test panels).

Update you things? If Yes, why don't you LV 2013 RTE installed as it would be necessary for full functionality of the driver?

Norbert

Error 1402 could not open key HKEY_Local_Machine\software\Microsoft Windows\Current Version\Run\Optional Components\IMAIL. Check that you have sufficient access to that key or contact your support team.

Error 1402 could not open key HKEY_Local_Machine\Software\Microsoft Windows\Current Version\Run\Optional Components\IMAIL. Check that you have sufficient access to that key or contact your support team.

We have solved this problem by granting explicit permission at the same time "domain users" and "domain administrators" you can plug in "domain" in the field and the search for the users and select them. But this solved the problem for us.

After updating to iTunes, I couldn't open TI-kept saying: run-time error.

After updating to iTunes, I couldn't open TI-kept saying: run-time error. Help please

C:/program files (x 86)

R6034

An application has made an attempt to load the C runtime incorrectly library.

For more information, contact the application support team.

I uninstalled iTunes, tried to reinstall, it never leaves me. Always giving this error.

Original title: Microsoft C ++ Runtime error

Hello

Uninstall everything according to the instructions from Apple:

«Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

http://support.Apple.com/kb/HT1923

It is also the same list of what to remove what is in the link above from Apple:

http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

Or try this program to remove it:

http://www.revouninstaller.com/revo_uninstaller_free_download.html

Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

"Resolution of problems with iTunes for Windows Update"

https://discussions.Apple.com/docs/doc-6562

If the advice already given does not, please contact Apple for assistance.

"Not to install iTunes or QuickTime for Windows"

http://support.Apple.com/kb/HT1926

"iTunes support-how to use iTunes.

http://www.Apple.com/support/iTunes/

"Contact iTunes Support.

http://www.Apple.com/support/iTunes/contact/

Or ask in the community Apple iTunes:

https://discussions.Apple.com/community/iTunes

See you soon.

After restoring the system, I get the error message "Hasp SRM run-time environment (H0033)" during the installation of the software that I downloaded.

Original title: software download

I did a restore on my laptop and had to re - install software. He downloaded without problem, but now it doesn't let me open - error message is 'Hasp SRM run-time environment (H0033) can anyone tell me what it is and how to fix it. I already ran a "solution" to the problem and it did not help. This software has no problems prior to the restoration.

Hello

This error occurs when the 'HASP License Manager"service no longer works correctly, stopped or not allowed in your environment. Before you continue with the troubleshooting steps, I would like to know some information about this problem.

1. what security software is installed on your computer?

2 What problem confined to a specific software or with any other software?

3. are you referring to the resolution of problems by running to solve the problem?

I would suggest trying the following methods and check if it works for you.

Method 1:

Make sure that the HASP License Manager Service is started. Try the following steps to check whether the service is started or not.

a. press Windows + R keys, type Services.msc and press enter.

b. Locate the Hasp License Managerservice.

c. double-click the 'Hasp License Manager' service and check if the Start button is grayed out or not.

d. If the Start button is gray, then click the Start button to start the service.

e. click on apply then Ok to save the changes.

Method 2:

If you use a security software and firewall on your computer, then try turning it off temporarily and check if the problem persists.

Note: Antivirus/firewall software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus/firewall software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

Please reply with the status of the issue so that we can better help you.

How to remove the black line with a canvas stacked at run time?
Hi all
I developed a canvas stacked in a table of content, when I run the form takes the apeared canvas stacked with a black line.
How to remove this line, or how to remove this line at run time?
I tried to do by putting (no line) in the Toolbox of the line color tool after selecting black line one and after selecting the stacked another painting once, but this has not solved the problem!

I need something else:
I put the canvas stacked to the block of data in detail and did not appear since I run the query in the database block
How to make appear stacked directly canvas before you run the query in the master data block?
What is your version of forms? I don't know what black line you're talking about.

Regarding the display of the canvas, first make sure it isn't about who has the focus and she rides (located under the canvas completely or partially) your canvas stacked, this will cause to the canvas to hide in order to display the item that has the focus. And you can also try using SHOW_VIEW ('your_stacked_canvas'); in your form, this will show the stacked canvas.

Tony

Satellite A200 battery run time

G ' Day, I have an A200 series PC laptop which is about 2 to 2.5 years, since the original battery died. I bought a new battery - one more (in other words, he had to last longer than the original). The new battery is not completely charged after charging for 6 hours, while the machine stops and only lasts 2 to 2.5 hours on battery. The power settings are balance and I especially don't work only with the word doc and sometimes the media player in the background.
The original battery (small capacity) used to last 2-3 hours on these parameters.
The manufacturer said tht, it may be a driver issue any.

If anyone has had a similar dilemma, and there, anyone know how I could fix this problem apart from return to the manufacturer of the battery?

Concerning
Rgtom

2.5 hour battery run time on the Satellite A200 is OK for me and it's the same as on my Satellite A300.
I think 2.5 hours DURATION is just average for this model of laptop.

Can you please tell us exactly what battery you bought?
Can you send us exact Toshiba part number?

VI LabVIEW Report Generation Toolkit elements in a TestStand sequence does not work with a LabVIEW 8.5 run-time engine

Hi all

I'm using LabVIEW 8.5.1 and TestStand 4.1. I did a sequence TestStand with a VI in this document, which uses items Report Generation Toolkit. On my machine I use LabVIEW and TestStand development system license. On another machine I use TestStand with basic deployment license and I chose the LabVIEW 8.5 run-time engine in the Configuration of the adapter. Everything works well except this VI with elements of Report Generation Toolkit. The error message shows that the VI is not executable. It works well only after I installed with a trial license and selected LabVIEW LabVIEW 8.5 development system in the Configuration of the adapter.

I found other posts and a document in the knowledge base with a similar problem: http://digital.ni.com/public.nsf/allkb/8A0E6274D9BD7B1986256F62006AD402?OpenDocument but I am not no EXE files in my sequence, so I do not know how to fix mine. Someone has an idea?

Improved LabVIEW 8 to 2013 and VI asked now to find the installation package for Run-Time Engine 7.0

I recently installed LabVIEW 2013 on a computer (running Windows XP 32-bit). The machine has also of LabVIEW 8 is installed, which is what I used before the upgrade. I opened a VI has been created in LV8 and then saved it and all its subVIs in LV2013. Now when I open the VI in LV2013 and try to run it, a window opens asking me to find the installation package 'lvruntimeeng.msi' for LabVIEW Run-Time Engine 7.0. If I cancel this dialog box, and the subsequent message, indicating that the installion files were not, the VI appears (at least of the initial inspection) to function normally.

I have closed LabVIEW, downloaded Run-Time Engine 7.0 on the site of NOR and tried to install it, but I received a message saying that it is already installed (as I had suspected). How can I determine what part of the VI and/or its subVIs tries to make use of Run-Time Engine 7.0? If not, how can I get LabVIEW to use instead the Run-Time Engine 2013 that was installed when I upgraded to LabVIEW 2013?

Bob_Schor wrote:

You run your VI of a project? If so, you can watch the dependencies and get an idea of what live "in charge", you might have. There may be "something old" in your code in LabVIEW 8, which was replaced in 2013, but ' plane still around "-If you can identify it, you can probably replace it with its"more modern"equivalent

If you do not have the VI in a project, you can simply open LabVIEW, create a blank project and add your first level VI. If all of your relevant screws are in a single folder, add the entire folder. Now look in the dependencies.

BS

Yes, I run the VI from within a project of LV. After some more research in the knowledge base OR I could solve the problem by using the following procedure:

1. use the measurement and Automation Explorer to uninstall Run-Time Engine 7.0

2. restart the PC

3. open the project, close the project by choosing "save all".

4. restart the PC

5 reinstall the Run-Time Engine 7.0 using a file downloaded from ni.com

6. restart the PC

7. open the project, close the project by choosing "save all".

8. open the project and run the VI. No more messages on LabVIEW, trying to find the Run-Time Engine 7.0.

How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

Thank you!

Townes wrote:

I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.

NI-VISA run-time engine

When 'building' a LabVIEW program containing NI-VISA under VI (for example to connect with USB), I had problems to get the code 'built' to find my devices NOR VISA, even if the NI VISA's USB drivers are correctly installed on the computer 'target'.

(The code 'built' will run if the target machine has an installation of LabVIEW to this topic, including NI-VISA)

-The NI-VISA run-time engine will automatically appear in the 'Build' (because of the Sub - NI VISA VI), or should I specify myself - and how?

Thank you. Peter.

Create an installer as you did the executable version. The installation program will be for the executable, not for the original project.

What version of LabVIEW are you using?

Can I run two separate versions of the LabVIEW Run - Time Engine on a PC?

Hello, I am curious to know if anyone knew if it is possible to install and use the two separate versions of the LabVIEW Run-Time Engine on a PC? I have currently 2009 runtime engine installed on a machine, and I wanted to install the runtime for 2011 as well. I know that you can run two separate versions of the LabVIEW program on the same machine, but what about the Run-Time Engine?

Thank you!

No problem at all. I currently have the engines of execution for 8.2, 8.6, 2009, 2010 and 2011 on my computer. Multiples are no problem at all. Go ahead and load.

Rob

Location of problem at run time components

Similar Questions

Maybe you are looking for