Locations of memory TravelMate C310

Want to improve memory in C310, shows 1.25 GB memory installed memory, found on bottom has 1 GB installed, plug call to max of 2 GB and has 2 locations, do not know where is the 2nd slot. Any help much appreciated.

fuzzie627,

The other location memory is under the keyboard, you will need to disassemble the camera a bit to get there.

Tags: Acer Laptops

Similar Questions

  • What is the size of the Philips screwdriver I use to open the locations of memory on my iMac late 2009?

    What is the size of the Philips screwdriver I use to open the locations of memory on my iMac late 2009?

    I already bought three different sizes at random and none works... I live in Germany and I need size in German units (if it is different from the United States).

    Thank you thank you a lot for your help!

    Philips #2.

  • Location of memory on Satellite Pro A40-742

    Hello

    I would like to expand my memory, but cannot find WHERE to put memory? No usermanual unfortunately.

    Thanks for any advice.

    Rena

    Memory locations are under the keyboard.

    First, he must remove the keyboard support (the part between the keyboard and display). Then remove the screws that attach the keyboard and now you can remove the keyboard.
    Now you can see the two RAM slot behind the insulation.

    If you n t have experience how to disassemble a laptop ask a technician for help.
    It's always a little tricky.

  • Makes great table location of memory permanently

    For the transfer of data from 100 M/s, I tried to create a table of 100 M and will pass the pointer of the array to a C program. The C program get the needle table and write to it.

    Just wonder if big Board has permanent memory location. If OS or labview doesnot assign continuous memory to this great picture. There will be an error when the C program tries to write to the table.

    Any suggestion, thank you.

    Arrays always have in contiguous memory. It is a fact, for each programming language, I know, is true for C as well as regards to LabVIEW.

    They got ways to 'emulate' contiguous memory in order to nihilate certain constraints of the system, but those who are most often specific IDE and cannot be shared between different programming languages (or more often with an overload immens). An example of such an approach can be found here (the link works for everyone hope!).

    hope this helps,

    Norbert

  • Add memory to HP ENVY Phoenix 800 - 070st - free space for the locations of memory behind the radiator.

    Hello

    I ordered a HP ENVY Phoenix 800 - 070st with 16 GB of memory and is to be delivered Friday. My question is how much clearance is here to the sticks of memory in the slots behind the radiator and the radiator has to be removed for adding memory to these two locations. Will it take low memory footprint, or is there room for mem sticks with heat sinks. It won't be here until next week, if just trying to plan ahead.

    Thank you

    Bryan

    Gateb, welcome to the forum.

    I can't find any warnings about any of your concerns in the specs of HP.  However, having said that, I suggest wait you receive the computer to make purchases.  HP isn't necessarily embracing third-party updates.  Memory performance with heat sinks can be very important, as you know, or you have asked the question.  Better safe than sorry.  Just my $. 02.

    Moreover, it is a great computer.

    If your problem is solved, please click "accept as a Solution.

  • Compaq Presario SR5010NX: One of the two locations of memory not recognized / work

    Had already upgraded RAM from 512 to 1 GB.  In an attempt to level again with a 2nd (identical to the first) 1 GB DDR2 DIMMS, I discovered that the 2nd module of memory was not being recognized.  I also tried with success the new! G in the first taken.  Specification to support up to 2 GB with 1 GB DDR2 DIMMS in each shot. However, "no beeps" and not "start with anything in the second taken.   I also tried two 256 KB RAM modules and as the two 1Gs only the a 256 KB has been recognized.

    I also tried to boot with a module in the 2nd outlet only and found that my system wouldn't start.  Any suggestion would be appreciated.

    C001uS

    Thanks again for your response.  I went not the CMOS battery. However, your answer made me look on a possible revision of the BIOS through HP customer care.  I downloaded the version of BIOS the same but with a more recent date.

    After download and install I shut down my computer, insert the 2nd module of 1 G and made a new shoe.

    Happiness is a system of 2 GB Dual Channel now running.

    PROBLEM SOLVED

  • locations of memory T530 - Lenovo solutions Center

    T530

    Question

    Is the Slot 1 (Lenovo Solution Center) under the keyboard or on the back of the computer?

    What I understand

    I understand that there is a slot memory under the keyboard and the other at the back of the computer.

    --> Lenovo Solution Center program / system / memory it says I have 4 GB in Slot 1 / 2 Slot is empty

    Thanks in advance for any help.

    LarryJoeRay

    Slot 1 is under the keyboard

  • Layout Error 998. Invalid access to the location of memory in Lightroom 6 with Win 8.1

    Lightroom 6 worked fine for 4 months on Windows 8.1

    First of all, he simply not open and now I get error 998, with no response from the program.

    Any thoughts?  I've uninstalled and reinstalled the software twice and still have the same error.

    Hi tadn,

    Could you please post a screenshot of the error?

    ~ UL

  • Zbook 15: Primary memory locations

    Hello

    I think of a memory upgrade for my 15 zbook. I have the two expansion slots occupied and before you actually buy the memory I wanted to check if I am able to make the change myself. So I tried from the memory of the expansion slot at the primary slots, those under the keyboard.

    At this place, I found the place for memory, but not slots for it.

    No idea why, or what can I do in this case?

    I've attached a picture of how my under-keyboard-slots looks like

    Well the manual says flat there are 4 locations of memory. I also know that on a HP mobile workstation recent model units with dual core processors have 2 slots and equipped models of Quad Core processors have 4.

    I also noted in the manual that the models Dual Core and Quad Core use different motherboards. I'll guess your laptop computer has a processor dual-core and the motherboard has only 2 slots memory, expansion that is more easily accessible slots only. If your laptop computer has a processor Quad Core explanation would then become more obscure and there must be an oversight at the factory during the production of the motherboard, and you should be entitled to a replacement laptop. In my opinion, if it is a dual core of the processor itself to limits you to 16 gigs so that you could not install modules of 4 x 8 gig anyway.

    Post back and we do know.

  • MacBook Pro model A1286 15 "Memory Upgrade

    I currently model A1286 15 "with two locations of memory both holding 2 GB (4 GB) cards.  I would spend my two 8 GB cards (16 GB) memory is this possible, or is the maximum memory two cards of 4 GB (8 GB)?

    Model MacBook Pro done in 2011 and 2012 support 16 GB of RAM.

    Not sure, but for my macbook pro 13 "in apple maximum is 8 GB

    Im searching in the web, I have a mac macbook pro 13 "with 16 GB of ram and a samsung SDS evo

    Check an Applestore or an Apple authorized reseller for sure and buy your ram

  • Satellite Pro C70-B-11 t - need help to improve memory

    Hello

    I have to expand the memory of a Satellite Pro C70-B-11 t by adding 1 module 8GB.
    The data sheet shows that the laptop can go up to 16 GB.

    I can't find the door opens for access to the memory locations.
    Should I remove the entire back panel?
    Do you have a procedure?

    Thank you for your help.

    Upgrade of RAM on this Satellite Pro is a bit complicated and I think that it should not be done by the owner of the laptop.
    Problem is that you will have full access to the locations of memory if the laptop top cover is completely deleted and it should be done by Toshiba service only. In the case that you do on your own, you can lose warranty valid.

    Try to contact Toshiba service nearest and ask for help. They can do for you, and I think that it cannot be so expensive.

  • HP Envy 850-065SE: memory upgrade problem

    HP computer: Envy 850-065SE (memory 4 locations)

    Memory: G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 2 * 16GB

    I just bought 32 GB (2 * 16) G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 memory to upgrade my HP desktop computer (model 850-065SE of envy). My office has a HP mother 2B3A and i7 - 5820 k and HaswellE chipset. The memory of the plant is of Samsung brand with configuration DDR4-2133.

    When I replaced the memory of samsung (trademark) with G.SKILL ones, the computer cannot start with black screen. When I've switched back to factory memory, the computer is back to normal.

    That means G.SKILL RIPJAWS V 16 GB memoryis is not compatible with this HP computer motherboard? or upgrade the BIOS can solve this problem? or do I return these memory and get 8 GB * 2 instead? Your comments are much appreciated.

    This model is limited to only 4 GB and 8 GB modules in the slot.

    B21 HP

    CL15 - DIMMs, 4 GB, PC4-17000, 798033-001, DDR4 COMPLY_2.07

    CL15 memory - DIMM, 8 GB, PC4-17000, 798034-001, DDR4 COMPLY_2.07

    You can buy online modules of 8GB.  Look at the technical on this point.

    https://www.CDW.com/shop/products/Kingston-DDR4-8-GB-DIMM-288-pin/3912220.aspx#Po

  • Adding additional memory to Satellite 1900-303

    I'm trying to locate the original 256 MB of ram upgrade to 512 but can't find it! I already added a 512 in the spare slot and works well, but where the hell is the original? He says there are two openings in the manual... help please

    Hi rockpebblar_1,

    What model of laptop you have exactly?

    On some laptop computers, you can find a location of memory under the keyboard. This means that you need to remove the keyboard first before you can exchange the RAM.

  • Where is the support of memory on Satellite 2450-SP295

    I have install memory expansion

    Please, I beg you. Spoke Spanish. Thank you.

    First all of the questions and comments in this forum from Toshiba are displayed in English
    and I assume that all users can match only in English.

    Now to your question:
    The Satellite 2450-SP295 is not known to me, but I found some info on the Satellite 2450 - S203.
    Both units show very similar and should have the locations of memory under the keyboard.

    If you want to upgrade the memory you have first of all remove the keyboard.
    The keyboard is fixed by 2 screws that are placed under the thin cover above the keyboard.

  • Portege M400 - where the memory?

    Hello

    Can someone tell me where on a Portege M400, the memories are hidden?

    However, normally live an elevation using a flap, the memory and good exchanges.
    But anyway I can't find this flap.
    Please, help around.

    THX
    Hans Meiser

    Hello!

    I m not a technician phone but as far as I know locations of memory on this laptop are placed under the keyboard. You must also remove the keyboard and the other parties. It's a little tricky.

    I think the best way is that you ask a technician for laptop. They have enough experience to Exchange or upgrade the RAM.

Maybe you are looking for

  • My Apple Watch is triggering security store alarms

    This weekend, I'm leaving the store's security at a local store and then yesterday again go into Best Buy.  At best buy the security guy suggested that I my Apple Watch off the coast and he gave it through security and it exploded.  It is very annoyi

  • Keyboard seems as if it does not work well

    Hello The brand of my laptop is AcerThe product name is Esxtensa 5220.My Windows system is Ultimate(64Bit) 7 I haven't installed a keyboard/mouse driver software when I installed Windows 7 because when I looked on the official website of Acer, I foun

  • Cannot open the input XML source

    Hello I'm trying to retrieve an RSS feed in XML format and display in the QML file. Here is the code snippet: QByteArray dataArray = reply->readAll(); //reply is QNetworkReply qDebug()

  • Certificates SSL ID not chaining of CA

    * Any thoughts on what this should have been posted in a different security thread? I tried this piece so that SSL VPN remote access, understanding PKI and ASA 5500 Series chapter 73 configuration of certificates of the digital Cisco, but still need

  • PS Elements 14 editor will download no graphics

    I recently downloaded / upgraded to my iMac to 14 PS elements.  It works on OS X El Capitan 10.11.6 (checked and said that I've updated). In the editor, I'm now trying to use the graph feature to put in pictures, background, etc.. The only feature th