Lockdown script

Similar Questions

• CF2016 - Alias/cf_scripts / scripts on the built-in Web server

  I am following the guide lockdown here:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/products/ColdFusion/PDFs/ColdFusion-2016-Lo ckdown - guide.pdf

  The guide proposes to move/cf_scripts/scripts directory, I did.

  The guide also offers using only the web server integrated access to the ColdFusion administrator, this is how I put it in place.

  The guide also indicates that you need to create an alias for the directory moved to the built-in web server.  See page 58 of the PDF.

  If you plan to use the built-in web server to access the ColdFusion administrator, you may need to create an alias for/cf_scripts/scripts if you have changed the default Script Src in ColdFusion administrator.

  To create a new Alias for/cf_scripts/scripts on the built-in web server

  If you plan to use the web server to access the ColdFusion administrator, then you must also add an alias by adding a tag context inside the tag of the located server.xml file host: /opt/cf11/cfusion/runtime/conf/server.xml

  < context path = ' / '.

  docBase = "/ opt/cf11/cfusion/wwwroot".

  Workie = "/ opt/cf11/fusion/runtime/cone/Catalina/localhost/tamp.

  alias = "/ coscripts = / opt/cf11/fusion/wwwroot/CFIDE/scripts" / >

  Restart ColdFusion, and then test by visiting /cfscripts/cfform.js on your server of builtin.

  There are a ton of typos in the present (Workie vs WorDir, vs conf cone, Pack vs coscripts vs cfscripts, tmp, etc..

  This also seems to be referencing the paths cf11 (CFIDE/scripts vs /cfscripts/cfform.js vs cf_scripts/scripts/cfform.js and cf_scripts/scripts).

  In addition, coldfusion - error.log notes the following:

  WARNING: A context path should be an empty string or start with a ' / ' and do not end with a ' / '. [The path [/] does not satisfy these criteria and has been replaced by]

  WARNING: [SetPropertiesRule] {Server/Service/engine/host/context} setting property 'alias' to ' / cf_scripts/scripts = / cf_scripts/test_scripts "did not find a corresponding property.

  The first line is not a problem, but the second line is.  alias is not a valid property of the context.

  The server.xml file is an example, and it is as follows:

  "< context path =" "docBase =" < cf_home > / wwwroot "WorkDir =" "< cf_home > / runtime/conf/Catalina/localhost/tmp" > "

  < resources >

  < base preResources = "docBase1" className = "org.apache.catalina.webresources.DirResourceSet" webAppMount ="/ aliasPath1" / > "

  < base preResources = "docBase2" className = "org.apache.catalina.webresources.DirResourceSet" webAppMount ="/ aliasPath2" / > "

  < / resource >

  < / context >

  It aligns with the Apache docs.

  I have CF installed on Windows, to F:\CF_2016\.  That's what I did to alias the directory of scripts (renamed to test_scripts for testing) for the built-in web server:

  < context path = "/" docBase = "F:/CF_2016/cfusion/wwwroot" WorkDir = "F:/CF_2016/cfusion/runtime/conf/Catalina/localhost/tmp" >

  < resources >

  < base preResources = className "F:/CF_2016/cfusion/wwwroot/cf_scripts/test_scripts" = "org.apache.catalina.webresources.DirResourceSet" webAppMount = "/ cf_scripts/scripts" / > "

  < / resource >

  < / context >

  It seems to work.  Is this correct? Wouldn't be an alias as \Scripts or /cfscripts instead of/cf_scripts/scripts?

  Why exactly should I alias this to the administrator?

  Thank you

  Hello

  I was in the same boat (we are defining a profile secure for testing) and I see no one answered you so I want to offer what we were doing.

  webAppMount = "/ {NEW_CFSCRIPTS_VIRTUAL_DIRTORYNAME" / >} "

  You see, I believe the problem you had previously was that the base should be the physical directory and the webAppMount should be the virtual directory.

  You were correct about the typos in the "official" document

  I don't know if it's important or not, but we have also created the directory "tmp" (quoted above) within the "{YOUR_DRIVE} :/. "{CFROOT} / cfusion/runtime/conf/Catalina/localhost / ' because it is not there by default.

  Kind regards
  David

• [Script] How the auto respond to an address specified when receiving any mail

  I need to send an email with the text previously set to exactly 1 address but I need it to be sent to every mail I receive, except those that are sent from an address.

  For example, any email me, with the exception of the ' [email protected]', I would answer "admin@mydomain" with the response of multi doublet with paragraphs of:

  "You lucky dog.

  Someone has sent you the just

  I think someone like you.

  Don't let your wife know.

  I tried to set up a mail rule, but mail only allows me to reply to the sender. It gives me the opportunity to call a script but I can't make an Apple script in Automator. Whatever I do in here, Mail can not see it.

  I managed to write send an Automator application which opens the message in Mail for me when I double click on it and then I just need to hit, but the whole point is that I want not automated. If I get an email from [email protected] then I want to admin@mydomain to receive an e-mail to tell him that he is loved by someone and I want all this to happen automatically.

  So basically what I need is an Apple Script which includes a static message and sends it to a static address, so I can tell Mail to use as the action when he receives an e-mail. Unfortunately, as far as I know about AppleScript is 'say Mail' and 'end tell '...

  Can someone help me, please?

  You can watch it too deeply. You won't answer at all – looks like you want to open a new message coming out when a new coming. It is not serious what who is, or who he came (with the exception of yourself).

  So, here's an example - it checks the incoming message for make sure there is at least a message that is not your own address. Is there then it creates a new message and sends it.

  Use AppleScript version "2.4" - Yosemite (10.10) or later version

  Use Scripting additions

  property myAddress: "[email protected]."

  property myMessageBody: "you lucky dog.

  Someone has sent you the just

  I think someone like you.

  Don't let your wife know.

  terms of application "Mail".

  we messageList perform the action of mail with messages in the mailbox mbox for rule agouverner

  -make a new message

  say application "Mail".

  game of newMessage to (make new outgoing message with properties {subject: "new mail", content: myMessageBody})

  tell newMessage

  do the new to recipient with properties {"address:"[email protected]""}

  end say

  Send newMessage

  end say

  end perform the action of mail with messages

  end terms of

  
  

  It is written as a mail rule, so add it to your ~/Library/Application Scripts/com.apple.mail directory, and then configuration a rule in Mail.app to run this script for incoming mail.

  You implement audit "not post me" in the rules dialog box (for example only call the script when the sender is not yourself).

• Backup script no longer works in macOS Sierra

  This line in a backup script used to synchronize the folder my documents with my Synology NAS:

  rsync - avh - delete - progress ~/Library/"Mobile Documents" / com ~ apple ~ CloudDocs/Documents /Volumes

  A ran in the Sierra, he deleted the contents of the folder/Volumes/Documents on the NAS. Nothing is copied.

  The ~/Library/"Mobile Documents path" / com ~ apple ~ CloudDocs/Documents is valid in the terminal. I don't see what has changed.

  Modify the script to this:

  rsync - avh - delete - progress ~/Documents /Volumes

  A did the trick. Do not know why. The old path seems valid in the terminal.

• updated 7.3 to 10.0.1 on iPhone iOS 5 in the messages, I can't put the phone in a horizontal position in order to enlarge the keyboard more. a field opens with the font script styles and I can't get off my screen, to get at the larger keyboard.

  I just upgraded my iPhone iOS 5 7.3 iOS 10.0, now when I use my e-mail, I can place my phone horizontally to get the larger keyboard is no longer and use my thumbs (many more fast typing). Now, I get a "field" with scripted, for styles to close since fonts. There is an icon of a 'keyboard' if I type nothing happens. Clues? your help will be greatly appreciated.

  Bill

  Pressing this icon small keyboard should work (done on my iPhone 7). Until someone answers with more information, another thing you could try is to open the keyboard when the phone is vertical and then put it too horizontal.

• I can't get a Perl script

  I can not get a script Perl - the compiler will not accept even the quotes

  Hello Newboy02,

  You will need to provide a little more detail than that. What is this Perl script? What do you mean "the same compiler will not accept quotes? There is no compiler with Perl.

• How to connect script in several chat rooms using the account jabber messages

  Messages frequently disconnected from chat rooms and must manually connect to the chat rooms when I am connected to a jabber account. Is it possible to write a script to have a set of chat rooms that I'll be able to login with a single click.

  Hello

  This is currently beyond the knowledge I have for AppleScript and Messages.

  Try to publish here the Technologies in Mac OS X

  The label for AppleScript

  

  20:35 on Wednesday. 17 August 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Why do I get, every 5 minutes or so, an error code "the Script is not responding" dialog box?

  The dialog box indicates, "a script on this page may be busy, or it may have stopped responding."
  Script: http://cdn.doubleverity.com/avs484.js:48. »

  Http: / / different addresses appear on different instances of the dialog box.

  What can I do to remedy this kind of mistake?

  DoubleVerify (http://www.doubleverify.com/) looks like an advertising company. It is possible that there is a glitch in their script, or that it is in conflict with an add-on.

  Are other random errors or can you find a special patron of servers or similar server names?

  A common cause of errors in script does not work on Windows 7 is the feature of mode of the Flash player plugin. This feature has the security benefits, but it seems to have serious compatibility problems on some systems. You can disable it using the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find 'Shockwave Flash' and click on the link for more. Then uncheck the box for "Enable Adobe Flash protected mode" and try it for a day to see if that helps you.

  More generally, our support article might have some useful advice: script is unresponsive warning - what it means and how to fix it.

• To create an automatic script that can start Mozilla Firefox in Incognito

  work with the marketing of the http://www.wireflydigital.com/ agency want to script for a http://www.dryfruitmart.in client, which can open Mozilla Firefox directly in incognito and no mode of the screen.
  any suggestions...?

  Right-click on the desktop and choose NEW - shortcut - "C:\Program Files (x 86) \Mozilla"-private-window http://www.dryfruitmart.in/

  Works great also

• I keep getting messages "Stop running this Script?" who advise they are originally my web browser run slowly. How do I rectify this?

  It is not a clear sign of the browser slows down. It does not seem to be limited to any Web site.

  Sometimes, this problem is caused by an add-on that begins interacting with the page after most loads content, so you don't notice the problem until you get the message. Can the extension Skype Click-to-Call cause this problem.

  In other cases, the problem may be caused by the content of the page.

  If you find any model of the script that runs slowly, say Firefox? Script names that start with chrome: / / or resource: / / address either parts of Firefox or an extension. Starting with http:// or https:// usually script names are part of the site you visit.

  For more information, you can try our technical support article: script is unresponsive warning - what it means and how to fix it.

  Another good cause script errors is unresponsive on Windows Vista and newer is the feature of mode of the Flash player plugin. This feature has the security benefits, but it seems to have serious compatibility problems on some systems. You can disable it using the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find 'Shockwave Flash' and click on the link for more. Then uncheck the box for "Enable Adobe Flash protected mode" and try it for a day to see if that helps you.

• The script in my web page is on the left side?

  The script on my web page is a letter on top of the other. Menu names and the script on the page. If I open a Google search bar research shows the script one above the other. Is there a setting that I can change? I've updated Järva. This on a Win 7 OS.

  Please post a screenshot of that.

  See this support article.
  How to make a screenshot of my problem?
  It is best to use a type of compressed as PNG or JPG image to save the screenshot and make sure you do not exceed a maximum file size of 1 MB.

  Then use the button Browse... below the text message response area to download the screenshot.

• enable java script in my browser

  I try to activate the java script so that I can access many sites such as my site Web of the College, the adobe Web site. I tried to follow the instructions on the Mozilla support forum, but I don't see java script in my plugins. It's desperate! I would be grateful any advice...

  If the above does not help...

  Sometimes a website will say that JavaScript seems to be disabled even when it is turned on. The possible causes for this are:

  • A script that launches a plugin, such as Flash, does not work, and the script simply identifies the problem incorrectly
  • An add-on filter page, for example, script blocking or any ads, and another script in the page detects the missing element and identifies the problem incorrectly
  • An external program as a security suite selectively blocks some scripts, and another script in the page detects the missing element and identifies the problem incorrectly

• Java script must be enabled

  I use POGO.com to play games.

  When I try to connect, I get an error saying I need to have java script active.

  It is activated and yet I get this error.

  Everything works correctly when you use Internet Explorer.

  This occurred for about a month now.

  Any help is appreciated.

  Appreciate the answers guys, but I'm not the only one world that is having this problem.

  However, it happened when you use Internet Explorer after I had posted here, so I think it is not da browser.

  Yet, the site insists on the fact that it is not them either.

  Tried different versions of Java and the same things continue to happen.

  Everything is set to "Always active" and no problem with all the other sites using Java sign ins... sooooo... I think there must be something with the site Web of POGO.

  Thanks again and lets consider cela an issued in FireFox is closed.

• Script to hide the dock while using Adobe software

  Hi guys,.

  I'm wondering - is it possible to write a script, automator service or something that hides the dock automatically at launch of Photshop exaple? It would be helpful since software Adobe is not fullscreen support.

  Thank you!

  Does not "automatically hide / show the Dock" in System Preferences > Dock?

• Thunderbird Java Script error

  Sometimes - usually the first use in a day - Thunderbird displays the error message attached looks at her from a java script. Unfortunately, the error message is not very explicit and hides in the backgrownd (visible only when all other windows closed or reduce) makes it difficult to pin point its source.

  I'm pretty sure his Thunderbird (or one of its addons) because this only appears when I use TB but, given that it is inconsistent, it is difficult to test. I think maybe it's the script that automatically removes unwanted emails.

  It started to happen after I upgraded to W10.

  No idea where its from and how to stop it?

  I think I found the source of this message. It seems to come from some software of motif that has been installed by PlusNet Assist to monitor the line broadband.
  It seems that PlusNet Assist does not work in W10 (and has not worked in W8 either but I found useful in W7).
  I uninstalled so I hope that the message will disappear (but, as I said, I can't reproduce at will so I'll just keep my fingers crossed).
  Sorry to have accused Thunderbird but at the time which was where the message appears to be.