Locked dashboard

Similar Questions

• Access to the dashboard when Local PC is locked

  Hello

  I am currently using my local PC to develop my dashboard and I want others to be able to access this dashboard even when I'm not around. I usually lock my PC, leave it running and other people can still access my link to host local/dashboard. But now, it seems that my presentation Services goes down each time I have lock or configure my PC to sleep.

  What I need to adjust the properties of any PC so that my local dashboard is always accessible even if its locked?

  BTW, I use OBIEE 10 g, Windows 7 operating system.

  Thanks for any help.

  Standby set to 'never '.

• I broke my external hard drive and now it locked and disassembled?

  I just have a lot of questions here. After trying many things I found in a deeper hole.

  I use an external hard drive, it's a Seagate Backup Plus 1 TB external hard drive. It is formatted and partitioned, I did using the steps for me the Web of Seagate site, when I got it.

  I entered the hole, I'm right now because I had backup problems near the top of my photos of Lyve on my external drive. I think the reason why they would not return, it was because my drive was in offline mode in the "Status" section in Lyve, despite the fact that disk utility says the status of the disk is online. I researched and found out that this can happen if a.) the storage is full or b.) the wifi connection is bad or a connection is not available. When I opened my Seagate dashboard, I discovered that my drive was full, so I thought that was the reason. This made no sense to me because there was no way that I had somehow already packed 1 TB, I had saved only once and it is brand new. However, I deleted a ton of pictures I put in 'Lyve Import' and then allowed the trash. (I must have accidentally imported them several times, so the photos doubled several times or something because altogether they are 50 GB, 1 TB not...) That seemed to be the source because then my drive had 938 GB free!... But my drive was always in offline mode.

  So I refreshed, rebooted, unplugged and replugged, returned Wi - Fi works for Seagate Lyve and my computer. But my drive was still offline even though disk utility always says that it is online.

  Now, I'm still trying to find out why, it's that my drive has been appearing offline in Lyve when I used different Wi - Fi connections in different places and they all worked well, and I have lots of storage. One of the reasons is that the partition on my drive has still pictures of Lyve copied import, I had deleted, because there is almost no storage on this score somehow, I suspect. As you can see in the second photo, the score says he has only 16 MB of available space, and I somehow used GB 999. If it is the same as before, I don't know how to access this partition, and then delete them. It is a copy of all of these photos of Lyve Import? However...

  NOW, currently the main problem that prevents me from continuing to investigate on the previous question is: I had encrypted my external hard drive some time ago. After having annoyed having to enter a password long so many times because of the reopening and that to solve the problem 'offline', I've deciphered this hard drive clicking in the Finder by clicking Decrypt. I entered the password to do this, and have decrypted AFAIK because the password has been accepted. But now my drive says that it is locked and disassembled? What? It is shaded in the left sidebar of disk utility. It does not appear as a device plugged into the Finder. It's as if he is not yet here, but I can still access Lyve. From what I understand, my disc encryption would protect its ' content with a password. Decryption, it would mean that I wouldn't have to type a password to access? Seriously worried that I screwed to the top of something because I did not understand what the consequences would be here. In addition, why my player not appear when the score indicates the status of the disk is online?

  I have included pictures of both the disk and partition information, and what they look like now in disk utility. Previously, from what I remember, in the information section of my car he had about 948 GB available, was mounted and he said it was a logical Partition encrypted, if it is of no use. It does not display this information now because it is locked, correct? I did not delete anything?

  As you can tell, I didn't know what I was doing the same in the first place - and now, I'm stumped. Please bear with me on this because all of this formatting and partitioning, and editing and similar is confusing me, only knowledge I had performed since the steps provided in the forums or on Seagate and Lyve directions on their website. I really don't understand what that means anyway - I wasn't trying to screw around things just... Any help would be GREATLY appreciated.

  

  

  

  ^ Note that this is what my Finder looks like now despite the fact that my external hard drive is connected. He always used to display the full drive Center 'FAVORITES' and 'TAGS' as a device that is currently connected, with the option to display its "table of contents or eject it.

  Update - I managed to solve this problem using this forum:

  How decrypt external hard drive, so it can be re-partitioned

  Make it wiped my drive, but given that I had pictures about it as I have copies on my computer, which was not serious.

  Good luck to everyone

• Try to remove the "free ride games" my Control Panel Add or remove programs - it won't let me do - computer locks up - what I do

  Other games is downlowed through fre ride games and I can't delete them from my dashboard, they just lock too.  I'm not very computer savy, so I need step by step instructions on how to remove this program

  Hi motel123,
   
  You can try the steps in the similar post and check if this help.
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/c9747f26-93af-4C52-8453-19312ae181c1
   
  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Lock and scroll touchpad not working not

  I have a HP G56-130sa, I have a problem with my touchpad, suddenly the lock of the material on the touchpad button has stoped working! When I double click it the lights and lock the touchpad. My gesture of scrolling on the touchpad has also stoped working! What should I do? Thanks in advance

  Try installing the latest software/driver Synaptics. First download and save the driver. Then, go to the dashboard, programs & features and uninstall the Synaptics software. Install the new drivers and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4326263#N508

• Mode locking ESXi and Tech Support Mode warning

  I would like to be alerted if an ESXi host is not in the locked mode or allowed to TSM. We have more than 100 guests and sometimes, when these settings are enabled us not forget to return them. Someone did he write or know that an alert rules on this?

  Thank you

  Chris

  It is not collected in the current version (vFoglight 6.6). It can be done with customization, creating a script agent who runs a PowerCLI script for example and fill the results in a dashboard.

  I will pass this along feature request to product management to add the collection of Lockdown modes / Tech Support out of the box and also have an alert for it.

  Thanks for the suggestion!

  / Mattias

• Lock button on the Curve 9380 blackBerry Smartphones

  Hello

  I hope someone can help.  My Blackberry as has recently developed it a problem where the bolt touches the habit ' work.

  I tried several resets masters by removing the battery and the SIM one frame and then leave.

  She also now further developed where the phone is locked or goes into applications with instructions.

  I'm a few months upgrade if you need this binding

  any help would be appreciated.

  DAZ

  This looks like what I've seen several times on a device with moisture damage.
  Even sitting on a counter in the bathroom during a steamy shower bath, or hot in a humid gym locker or against kitchen when there is high humidity, can cause problems with keyboard and trackball up to properly dry. Really, it is more common than you think.
  1 the battery immediately! Do not turn on your BlackBerry device.
  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)
  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).
  4. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  Suggestions on your BlackBerry in a warm dry place (open, with battery):
  * Place the BB in a container of rice uncooked dry, and then you can also place it in one of the locations mentioned below.
  * On top of any heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  * On the dashboard of your car on a day sunny

• Navigation buttons are locked

  Adobe Captivate 7

  I'm looking for a way to have the 5 menu buttons with sections that are locked until the user completes the previous section.

  Example:

  Button 1 is article 1, user cannot click the button 2 section 2 without completing the module in section 1.

  I have setup a similar training before that performs a complete 5 user modules until the continue button appears for them at the end of the training.

  Any ideas?

  You can disable the buttons with action (slide before the dashboard).  Because you want to also follow the end of each module to display the continue button on the slide of dashboard, create a variable counter with a default value of 0. At the end of each module, with the button Back (back to the dashboard), increment this variable to 1 (standard action with two commands: "Increment v_counter by 1', followed by"Jump to the dashboard"). The most important action is the on enter to the dashboard, where you will have a conditional action with several decisions:

  first decision    IF v_counter is equal to 5

  Show the button continue

  second decision    IF v_counter is equal to 4

  Disable Button4
  Select Button5

  third decision    IF v_counter is equal to 3

  Disable the Button3

  Activate Button4

  fourth decision    IF v_counter is equal to 2

  Disable Button2

  Activate Button3

  fourth decision    IF v_counter is equal to 1

  Disable Button1
  Select Button2

  sixth decision    IF v_counter equals 0

  Select Button1

• Locking of the item needs Attention

  Hello

  I connect you as Presentation Server with Permition from full control administrator.

  But when I try to change any dashboard I get the error message

  «Locking needs Attention point: / users/administrator/_portal /...» »

  or

  "Point of locking needs Attention: layout/shared/Financials/_portal/General Ledger/dashboard.

  ....

  Thank you

  Ark

  The problem was with no free space on $ORACLE_HOME. Adding memory and reboot, solve the problem.

• Dashboard OBIEE CRASH!

  After working on a workbook I now get the following error if I try to access the page to view the results or even if I try to access change.
  
  All other pages on the dashboard are functioning normally.
  
  Any suggestions please?
  
  On OBIEE 10.1.3.4;
  
  Dashboard display error
  
  With the object file system error: / shared/ENDYMION/_portal/Endymion/Workbench
  Error details
  Error codes: EINP865M
  
  Thanks for the pointers,
  
  Robert.
  
  
  -More information. -
  
  I can't delete the page.
  
  (Error deleting article
  
  With the object file system error: / shared/ENDYMION/_portal/Endymion/Workbench
  -Details of the error
  EINP865M Error Codes
  
  I can't rename the page.
  
  But fortunately, I can hide the page.
  
  -So my solution was to recreate and hide the original, but if someone can tell me what can be corrupted and how to fix it?
  
  Pourrait - what does this have to do with lock, my internet explore took a long time to come back after a SAVE operation on the content of the page...
  
  Thank you
  
  Robert.
  
  Published by: Robert Angel on August 26, 2010 06:31

  I don't know about the crash, but to remove the problem, check if the webcat (located in \OracleBIData\web\catalog\) files are read-only.

• Reminders do not display or stick to the lock screen in iOS10

  IOS10 (10.0.1 and 10.0.2), on an iPhone (I use an iPhone 6), reminders are no longer reliable. I had several cases where the callback doesn't show even on the screen lock and many more times when the recall won't 'glue' to screen lock for more than a short period. Before iOS10, when you said to remind you at a certain time or place, the recall would display on the reliable lock screen until she has been marked as "completed".

  It is a major issue for people who depend on the application for the important tasks and calendar. There is a thread of any discussion on this point, for some reason, has been marked as "solved" even if a large number of people continues to post telling him that there is a problem for them too (as the thread located here). I wanted to start this new discussion which we hope will remain open until it is effectively resolved.

  Thank you!!! This is a HUGE problem!

  Since the update I had to reboot my phone EVERY day.

  Is the stick of reminders... or they do not. Lately they don't yet show upward. Then other things stick to the lock screen can't get rid of.

  Currently this feature on the phone is USELESS

• How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  Settings > Notifications > Messages > display on the lock screen

• What is the text on the lock below screen date, after upgrade to IOS 10?

  Hello

  I have iphone, and after I upgraded to IOS 10, from dated on the lock screen (muh.5 1438 AH).

  What is - this and how can I remove it?

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see

  Apple logo.

  It may take 30 seconds.

  See you soon

  Brian

• Chinese characters in the lock screen

  I recently updated to iOS 10 and shortly after started to see Chinese characters on my lock screen, under the date and time. I checked the language and region settings and see only English and selected Philippines which is correct. Don't know what that other settings I need to change? I also tried to change my lock screen and the same characters are still there.

  Thank you

  Marc

  Hello

  Bought second hand new iPhone?

  See you soon

  Brian

• my look of the IPad 2 is locked. I want to erase and reset

  my air pad 2 is locked, erased before using my itunes. i tunes won't recognize device not

  Follow these steps If iTunes recognizes not your iPad, iPhone or iPod - Apple Support

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports