Do not start by Satellite A200-1AB

Similar Questions

• Satellite A200-1AB - computer initializes partially

  Hi all

  My satellite A200 - 1AB that partially goes to market and all I get is a black screen before the computer showing the log on screen. I am running Windows Vista and I wonder if anyone can help?

  With the power cord plugged in, I press the button and the computer begins to initialize. I see the Windows Vista "loading bar" that scrolls from left to right and then the screen turns gray (with back-light black) and I don't see anything except the small blue on light.

  I tried pressing F8 and choose 'last good config known' but which does not always work - get a black screen.

  I managed to start the computer in safe mode (to restore), but the success of the startup in safe mode is random.

  I noticed that if I leave the laptop for about 30 minutes or so things work a little better and I can get the computer to work in safe mode for example for at least 5 minutes or similar. Initially, I thought it was the cooling fan, but who still works and I cleaned using an air blower.

  Can anyone help or make a suggestion on what could be the problem?

  Thanks T

  PS: I have once to see the activity of the system. and he showed that a day or two ago there was a driver from windows update. This could affect the PC maybe?

  Hello

  Yes, perhaps he could the reason for the update of the driver on the Windows Update page. I have never installed these drivers because they are not pre-tested on Toshiba laptops, so I always use the drivers from the page.

  In any case, I think that you need to reinstall Windows, if you can start t in normal mode. You can use the HARD drive recovery option that only takes a few minutes to reinstall Windows. If you go into the advanced boot menu, select fix my computer. Some files are loaded, then you can choose the Toshiba HARD drive recovery service. Now follow the instructions on the screen.
  But don't forget that all the data on the first partition will be erased!

  Good bye

• Extension memory Satellite A200-1AB

  Hello
  AI? have a Satellite A200-1AB, Windows Vista Home Premium 32 bit, which has 1 GB of RAM (2 512 MB memory). Now, I want to increase RAM of 2 GB capacity. If I change only one of his memories from 512 MB to 2 GB will work as 2.5 MB or it is not possible?
  I should the match two memoirs of 1 GB each to get 2 GB instead?
  If I have 1 GB + 2 GB will work as a 3 GB?
  What is the limitation of the RAM on this laptop?
  Thank you.
  Of

  Hello

  When you place a modules of 2 GB and 512 MB set you will have 2.5 GB RAM memory installed. It works, if Don t be in doubt (times have changed and we now live in a world with memory DDR which is more flexible than the RAM EDO or SD - RAM) the work of configuration and it s possible.
  Visit this link to learn more about RAM and its possibilities.

  To match the modules is always a good idea since then the modules will work in the "DUAL-Channel" mode that brings a few more performance.
  Here´s a link with more information about DUAL-Channel: http://en.wikipedia.org/wiki/Dual_channel

  Yes, 1 + 2 GB configuration works also but not in DUAL-Channel mode.

  The limitation of the RAM is 4 GB, but you cannot use the entire 4GB reason some chipset of the limits.
  Please visit this link to learn more about the "4 GB limit": http://www.brianmadden.com/content/article/The-4GB-Windows-Memory-Limit-What-does-it-really-mean-

  Hope I've answered your questions... :)

  Good bye

• Satellite A200-1AB has Bluetooth and if yes how I turn it on?

  I have a toshiba satellite A200-1AB, I was wondering if there is a bluetooth cos I can't

  Check if your laptop has a BT tag at the bottom of the unit.
  If so, then the laptop supports the BT module and you could turn it on by pressing the FN + F8 key combination.

• Many devices do not work on Satellite A200 - FL1 LEFP6 with XP SP2

  I am the owner of a Satellite A200-fl, I removed Vista and successfully install XP SP2. However, the computer is running, I have several problems after that installation drivers Toshiba (Spanish) found in download section.

  1st. no audio hardware is found, I tried the following drivers: * 5.10.0.5440 * Realtek Semiconductor Corporation Windows XP drivers, Realtek Semiconductor Corporation Windows XP 1.69, Native Windows XP SP2

  2nd. modem is not found, I tried the following driver: * Toshiba Windows XP SM2177ALD04 *.

  3 Bluetooth does not work, I tried the following driver: * Toshiba Windows XP 3.01*

  4. in the hardware tree, there are two PCI devices properly installed, I don't know what they are.

  5 shortcut keys do not work, I tried the following driver: * Toshiba Windows XP 0.48.2.1.C *.

  I must say that I have followed the instructions of installation of Toshiba and used Toshiba official drivers only, but there is no way I can fix it, I feel really upset and fed up with this situation.

  null

  > - Does anyone know how to solve his problem?

  1) start with a clean install of XP etc...
  (2) install the Chipset & graphic driver and a few other drivers
  (3) installed Microsoft * hotfix KB888111 *.
  (4) install a windows XP update
  (5) install the audio driver

  For more details, see this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26856

  Good luck

• Had to remove my battery to start my Satellite A200

  My laptop Toshiba Satellite A200 after allmost 4 years of use on shutdown remained with the

  "Power on led" lights up on the systray and refused to start when I hold down the Power button.

  When the Batttery was deleted and I tried to start with cable AC power adapter, it starts as usual

  without any problem.

  The model is A200 - 1 M 4

  Model No.: PSAEOE - 04E029GE

  DC19V 3.4 HAS

  Made in China IT.

  So far, my battery has been recharged effectively

  and kept the load when unused for at least 5 days. When I

  a pluging in the AC/DC adaptor the led turned blue in a few

  minutes, anyway it was never orange flashing.

  Until recently, with the AC adapter disconnected with my recharged cable

  battery I could follow work for at least a year and a half hours.

  Can I check the status of the battery before replacing?

  Should I be looking for another vice of repair or not my battery needs replacement.

  Can someone try to help.

  Thank you.
  .

  Thank you for your comments.

• Bluetooth does not work in Satellite A200 - 1 M 4

  Bought A Satellite A200 - 1 M 4, and the Bluetooth does not work unfortunately.

  Why is-Bluetooth driver on Satellite A200 - 1 M 4 in English? It is possible to establish Toshiba help speaking Russian with all public services? When I want to start Bluetooth, why is there a mistake, what happens in my house windows even though I closed all is open and even restarted the laptop?
  I'll be very grateful for the help!

  Please help with this question. [email protected]

  Null value

  Verify that Bluetooth is inside:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ/bluetoothnotworking

  If so, update your Bluetooth stack with the more recent of the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/?page=download

• Camera driver not found on Satellite A200-130 Vista

  In my new Satellite A200-130 (with built-in 1.3 m camera), impossible to find any software/driver of the camera installed.
  It presents Chicony USB 2.0 Camera in the device driver > imaging devices, but can't find the software anywhere shortcut in the start menu > programs as the user manual says.

  Help, please...

  Hello

  Check please in the taskbar near the time, he must have placed there camera assistant software icon. If you can find it please delete the mouse pointer on the side of the screen on the left and in the middle of the screen on the left side menu where you can start web cam application will generate.

  I checked on the P200, but it must be the same. This camera assistant software is also listed under start > all programs. I really don't understand how you can not find it on your A200 laptop.

• Why not start 4090XCDT Satellite with DVD-R/W drive?

  Hello
  I fear I know the answer, but confirmation would be very useful for me!
  Bought a Satellite 4090XCDT opportunity where the former owner has replaced the original CD-ROM with a 2004 Quanta Storage SDW-042 DVD - RW.
  Seems that it was not so smart I have thougth - computer laptop won't boot from CD (BIOS is set to CD-floppy-HDD, of course). So I can't install any system Windows on it. If I insert Windows 2000 boot disks, for example, it reads all the four of them and then said "no CD-ROM not found", probably because no DVD - RW driver is available on the Win2k installation media.

  Is it possible the BIOS since the 1999 (?) Satellite won't be able to boot from the DVD player in 2004 even though the previous owner _had_ installed a Windows 98 that was able to read - but not boot - DVD player? Can I solve the problem to downgrade the drive from DVD - RW to a CD-ROM, the Teac DC-224th (which I believe was the original) or a similar one?

  TIA

  Post edited by: Merkur_1

  > Is it possible the BIOS since the 1999 (?) Satellite won't be able to boot from the DVD drive of 2004 even if the previous owner had installed a Windows 98 that could read - but not start - DVD player?

  Is it possible that the BIOS does not recognize the new CD/DVD drive because of the bad settgins of master/slave/c-salt.
  You should know that not all CD/DVD players are compatible.

  But it could also be a failure of CD/DVD drive and the BIOS does not therefore see the STRANGE news.

• TPSMain.exe does not start on Satellite U400 - 14 p PSU44E running Win XP

  Hello

  I installed Windows XP Pro SP3 on my U400 PSU44E - 14 p.
  I found all the drivers on the official website of Toshiba (thank you) but one in the origin of the problems: TPSMain.exe does not start when I start the computer.

  Once I type my password and login, I hear a typical Windows error sound, but no message is displayed. I noticed that when you try to start the Toshiba Power Saver utility from the Control Panel, I got an error message telling me that I have enough privileges to run this utility...

  I am the administrator!

  If you guys encountered the same problem and got a hint of trouble, feel free to post here. THX.

  I have a Toshiba Satellite U400 and I installed Win XP too.
  I have a user account administrator and Toshiba Power Saver works properly!
  No problem don't like on your system!

  However, in the Toshiba Power Saver Settings (installation options), you can find the option called limited allows the user to change the settings and allow different actions for each profile.

  Check that both are enabled!

  If this doesn't help then reinstalling again this tool.

• Recovery disk will not start on Satellite 1110

  I try to use the recovery on a Satellite 1110 CD. I want to just install fresh Windows. The necessary files are supposed to be on the Toshiba recovery CD that accompanies it.

  So I did what the brochure says, and booted up the laptop to the top with the correct CD in the drive, while pressing 'C '. The notebook ignored the CD ROM and loaded Windows as usual. I repeated three times, each time that the CD ROM whirs a bit but will not start and Windows loads as usual. I have replaced 'C' for F12, chose the CD ROM drive in the list and repeat the process several times. Yet once it wouldn't boot from the CD-ROM.

  I looked at the content of the CD ROM A single MB 447. File of the GHS. The file icon is that generic type "Windows does not know what program this icon is intended to" deals.

  Google believes it is a ghost file and must the ghost installed to run it. This bitch never came with Ghost.

  Anyone here knows a remedy to this problem?

  (NB - I tried clean Windows system restore option, but it just brings back me to September this year. Theres no option that was more early in life for portable computers)

  I am in the United Kingdom, and is a UK machine if that makes a difference.

  Hello Micha

  Is this your ODD works properly with the operating system?

  I put really know what exactly is happening here, but please make sure that you start with recovery CD number 1/2 2/2. The installation of recovery, you can just start with the first recovery CD. Also try please set CD-ROM as firs boot device in the BIOS.

• Recovery does not start on Satellite P200D

  I have a satellite P200D and I need him back due to a virus.

  Now, I ordered the recovery media kit and when I want to start it it does not start. The manual said, put the DVD, restart the computer and press F12 when the massage "In Touch With tomorrow TOSHIBA" poster.

  The message is not shown in the configuration and the recovery does not start.
  When I press F12 at startup is also the recovery does'nt start.

  What I am doing wrong?

  How can I get my laptop back?
  Any ideas?

  Hello

  You must boot from the disc.
  This means that you will need to insert the disc, have to turn on the device, choose ODD as boot device and this will start the recovery process.

  Try this!

• Can not start my Satellite L305D-S5940

  My laptop is Toshiba Satellite L305D-S5940 with Windows Vista Home Premium. The following message comes when I try to start it.

  Windows could not start. A recent hardware or software change might be the cause. For fox the problem:
  1. Insert your windows installation disc and restart your computer.
  2. Select language settings and then click on "next".
  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Boot\BCD
  Status: 0xc000000f
  Info: An error occurred trying to read the boot configuration data.

  Unfortunately, I do not have the windows installation disc. What am I supposed to do? I can't access "safe mode" by pressing F8. I'd be grateful if someone helped me feed my computer please.

  Now, it's quite complicated especially if you cannot boot your laptop in safe mode.
  I'm afraid you may not do much and best and solution the easiest would be to new installation OS m.

  You don t have the windows installation disc, but you maybe DVD recovery?

• SD memory cards are not recognized on satellite A200

  Hello!

  I had a Satellite A200 installed with Vista.
  When I insert the SD card into the laptop, nothing happens. My SD card does not seem to be recognized by the system.
  I tried to different maps, but none of them have been recognized.
  SD host controller is listed correctly in the Device Manager.
  I don't know what happened, but there is no problem with SD cards before you recognize.

  Thanks in advance!

  Hi there, my suggestion would be first uninstall and then reinstall the drivers from your SD controller (available for your laptop model on your regional site of Toshiba drivers). If this does not resolve the problem, then visit the following link to download an update to enable playback of higher capacity SD cards under Windows Vista: http://www.microsoft.com/downloads/details.aspx?FamilyID=e42fc131-6a76-4b27-934a-fb19dd323dab&DisplayLang=en if this fails, then make sure that you are upgraded to Service Pack 1 of Windows Vista.

  I hope this helps

• Drivers for Windows XP Wireless does not work on Satellite A200-1WR

  Hello

  I had installed XP on my laptop (model name: Satellite A200-1WR) (model No.:PSA3E3 - 05J01CCE), and then I downloaded all the drivers for this operating system from toshiba support page.

  When I installed those wireless, it has begun to settle, but finally it did not complete properly... after that I tried to install drivers from intel are supported on the page. Intel PROSet/Wireless "but with that program finishes installing, but then saids OS that there is a problem with the cameras...
  I don't know what to do now, you have an idea?

  Hello and thanks!

  Hello Miguel

  To be honest, I can't believe this. The WLAN drivers are offered for a long time on the Toshiba support page and if there is a problem with the driver itself Toshiba has had time to react and offer the best version.

  Anyway, Utility Intel ProSET offers to set up the WLAN connection. To be honest you do not have it at all because the WIFI connection can be set up very easy with Windows settings. At first make sure that the WLAN device is correctly enabled combination of keys (FN + F8 to use).