Locked iPhone 5s - it will restart after that 11 fail attempts?

Similar Questions

• my iphone 5 c opens more after that I was invited to be updated with itunes. now, the display shows only itunes usb cable and logo. read some tips here, but nothing happened. any help will be much appreciated.

  My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.

  https://discussions.Apple.com/message/30014877#30014877http ://

  Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.

• I use Windows XP and care April 2014 if I always use the it, what will happen after that Microsoft no longer supports it?

  I use Windows XP and care April 2014 if I always use the it, what will happen after that Microsoft no longer supports it?  My computer will become unusable?  It works great and I would keep it if I can.  I use a Dell Inspiron 530 desktop.  Some people have told me that "nothing will happen" and others tell me that my computer will be more vulnerable.  I use ESET NOD 32 and Malwarebytes.  They tell me that they should still continue to work.  I am told that because my computer was purchased in September 2008, he cannot me upgraded to Windows 7.  I'm not a geek and would need assistance "passage" my files from one computer to the other as well.  And then what to do with my old top office.  I'm very worried and I had to face the fact that Microsoft is not going to deliver any security updates patches after April of 2014.

  I can't wait to hear from someone on this problem and more just to go out and invest in Windows 8!  Thank you.

  I can tell you one thing, all or almost of windows xp device drivers will disappear from the computer manufacturers support websites and will reappear on all these shady sites who claim to be download for free but comes with unwanted software. Download the latest device drivers and keep several copies of them and download them to your skydrive or dropbox account fo guard.

  I doubt that will happen. I've seen Windows 2000 drivers still on websites mfg.

• PC keeps restarting after that I copied some files

  my pc keeps restarting after countless attempts trying to remove this file dvd that I copied from a dvd. When I tried to delete this file using a different account, the cycle just repeats.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite M300: bootmgr missing after that recovery failed

  I tried to reinstall Vista using Toshiba Recovery disk... when I tried to do it took a long time to copy files and then he asked for the next record.
  Even after inserting disc 2 it always asks insert the next disc... I had no choice and I cancelled it.

  When I started again, it says bootmgr missing
  "CTRL + ALT + DELETE" to restart

  I've blocked up do not know what to do.

  pls tell me SME suggestions

  Hello

  The bootmgr missing error appears because the recovery procedure hasn t done and the former a bootmgr was destroyed.

  It seems that your second DVD is not readable without apparent reason.

  Maybe you could try to recover the laptop using the recovery of HARD drive option.
  Maybe the partition was not damaged during the procedure of recovery DVD.

  Then, press F8 after that laptop has been powered. Choose the first option called fix my computer. Choose the last option Toshiba Recovery and try to recover the laptop HARD drive.
  If it doesn t work then you could boot from the original Vista DVD and could try to repair the boot manager.

  In the worst cases, you need to reinstall the OS from Microsoft's Vista DVD or you order a new Recovery DVD from Toshiba.

  Good luck

• How to stop iPhone 6 home and lock screen to drain the battery after that ios updated to 9.3.1 update.

  My iPhone 6 updated ios 9.3.1.  Never a problem before, it now shows that the home screen and lock use 78% of my battery.  How can I fix? Please help me.  Thank you.

  Your battery drains faster than before?
  If not then 78% is a comparative number - this means that your phone is turned off or to the screen for long periods of time - perhaps more than you use other applications

• iMac (20 inch, early 2008) will not restart after that put 10.11.4 updated

  Plug the iMac:

  Processor: 2.4 GHz Intel Core 2 Duo

  Memory: 4 GB 800 MHz DDR2 SDRAM

  Graphics card: ATI Radeon HD 2400 XT 128 MB

  After the download is finished installing, I clicked to restart.  When the computer restarts a gray screen with the Apple logo appears with a progress bar indicating "Installing Software Update".  The progress bar begins to move slowly and stops after about 1/8th of an inch.  It does not move little matter how long wait.  I tried to reboot safe mode, but I get the same thing.

  I have really no idea what to do. I searched online and found several suggestions that go beyond my technical skills.

  See if you can restore OS X by using the command + R key combination.

  Instructions here > OS X: on OS X Recovery

• Restart after that a windows update problem with VirusScan from McAfee (total Protection)

  I'm under 64-bit Windows VISTA Home Premium SP 1 on a Dell Studio 540 desktop.  8.0 GB RAM.  Intel Core 2 Quad Q9400 CPU @ 2 .66GHz.
  Late last night, I started the PC to go online.  Shortly after, I was invited by Windows update to restart.  So I closed off everything and rebooted, except that I kept scheduled analysis of McAfee, which I set up for Fridays.  I have McAfee Total Protection, which includes VirusScan.  That the PC would shut down, there was a message on the screen of McAfee who said, essentially, stop this scan before restarting.  I'm paraphrasing - I didn't write down the exact message.  After reboot, I started again the background anti-virus scanning.  After a few minutes, I received the following message:
  Microsoft Windows
  Order McAfee VirusScan Scan - Are asked to work and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.
  I have not received a solution of Windows.  I completely uninstalled McAfee Total Protection, following the instructions of McAfee, then reinstalled.  Everything went very well with these processes.  I have yet to receive an indication of the McAfee software that something is wrong.  After the reinstallation, I tried a scan, but got the same error message as above after a few minutes.  It does not occur immediately, analysis continues for about 5 minutes, then abandoned.
  Chatted with Dell today.  They suggested a system restore, I will try then.

  What updates have been installed?

  During certain infections that are designed to defeat security software will cause the bomb on analyses with an error.

  I also suggest you contact the McAfee Support since it is their product which blocks.  http://service.McAfee.com/TechSupportHome.aspx?LC=1033&SG=TS

  To view installed updates:

  1. click on start > Control Panel > Classic view > Windows Update.

  2. along the top, click view update history.

  3. click on installed updates

  4. you can sort by name, status, Type, or Date updates. You can also click on each update and select Show details to access the details of this update.

  Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »

• What happens to my key if my hard drive is formatted, the key will work after that my hard drive is formatted?

  I want to know that my synchronized computer key will work if I format my drive hard because when the hard drive is formatted, then the key code is deleted, even though I saved my key will it work after formatting hard drive. Let me know.

                let me also know that what will happen if I lose the key I had saved then how will I access my synchronized computer .
  

  Hello!

  Can you indicate the information where it says that the information is stored in our servers? If that mentioned anywhere we need to clarify.

  The only reference I found is here: How can I set up Sync on my computer? and it is specifically stated that the information is synchronized on devices through our servers. If it is misleading, let me know so that we can reword it.

  Regarding the storage of the key in your pen drive or any other backup system: this is the best solution and it will work correctly after you format your computer. The key does not change when you format your computer, so you will have no problems after all.

• iPhone 6 won't restart after the iTunes backup restore

  Recently, I've restored my phone to pick up things that have been deleted. He made through the restore on the computer then it said to wait for iPhone restart but it has not restarted. should I let him sit and wait or what? I need a phone that I am traveling out of State tomorrow morning

  A DFU restore usually recover the phone:

  • Install the latest version of iTunes on your computer, if it is already there ((you must have Windows 7 or later or OS X 10.8.5 version or later version)
  • Restart your computer
  • Disable any antivirus and firewall
  • Launch iTunes
  • Connect the cable of the device to a USB port on the computer (not a USB hub), but DO NOT CONNECT to the DEVICE AGAIN
  • Press in and hold the HOME and SLEEP at the same time for 10 seconds exactly, buttons until the screen goes black, then release the SLEEP button but continue holding the HOME button. If the Apple logo appears then that now the two buttons, you who was held for too long; start over.
  • While holding down the button HOME connect the other end of the cable to the device
  • You should see a message in iTunes saying there were a phone in recovery mode (it can take up to a minute for the message appears). When you see this message release the HOME button and the device must be restored. When asked DO NOT restore a backup. set up as a new phone.

  Try several times, if this does not work the first time; It is difficult to do in DFU mode.

• Contact ID for the iphone 6 no longer works after that I added my fingerprint to my new iPhone 6 s

  Greeting

  I also have this problem with my iphone 6. After I added my fingerprints on iphone 6s, he stopped work on the 6 and a message appears saying:

  'Failure cannot complete installation Touch ID please go back and try again' and now my question is, how do I get the print job because someone else will use it?

  If you give the old vieux iPhone iPhone away, to do this, see below:

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• IPhone 5 c bad weather after that I dropped it.

  I dropped a few months ago and I have tried a lot and read a lot of things but I don't know what to do.

  I turned it off auto time and together than to the right but it always slows down and custom travel 10 minutes for about 4 days. What can I do? Dislodged something in my phone?

  I know that sounds stupid and I regret it completely but frustrated I he fell on the tiled about 4 times on the side to fix (I know im stupid, that I was so angry at the time because of family problems on top of my phone does not)

  Would have dropping me much caused other problems? The screen is cracked but I can get repair.

  Thank you

  Hello

  Contact Apple support (mail service may be available) or make a booking Genius Bar to get your verified iPhone and establishing your available service options, costs and likely delays:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• Help blackBerry Smartphones! Bold 9900 will restart after repair of the unaccesible built in memmory guest

  Hi I have a bold 9900 it turned off it self even if a file has been download, I turned it on the prompt saying built in unaccesible memmory due to repair detected errors (YES), now it turns on I type the password, and then it crashes or restarts. I had the operating system reinstalled, but the same problem HELP!

  Hi Danial9900

  Welcome to http://supportforums.blackberry.com

  Donwload 9900 OS 7.1.0.1098

  You must cause the error 507

  Download BBSAK
  Connect your BlackBerry via USB (I recommend that you remove the password of your BB)
  Wipe applied.
  Showing error 507 that what follows applies

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  VIA | JSanders

  http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/error-507-reload-software/m-p/1477...

  You can update your BB via the Loader via CrackBerry

• Lexmark x 73 will work after that I updated to Windows Vista?

  Original title: lexmark x 73\windows vista

  I have windows vista and I want to install my lexmark x 73 prints I will update of windows, but I don't know to update and it'll work

  Hello Betty,.

  According to their website, the X 73 is a laser printer that works on the XP Windows OS only. So if you have this impression under Windows, it must be in compatibility mode. Is this the right printer, or you have a different model?

  If this is the right printer, it will only work on a 32-bit operating system, so you'd be lucky so he can print in Windows 7 Home Premium, 32-Bit operating system. Can you confirm the model number for me please? And your version of Vista is 32-bit or 64-bit?

  If you can answer these questions, I will try to provide you with further assistance.

  Kind regards

  BearPup

• What will happen after that?

  I have a procedure began yesterday to update a table. But I did this morning. Just after I killed the session, I started another SQL to perform the same task to update the same table and the same columns but faster.
  
  What happens now is: the Oracle performs a roll on the procedure killed while the new SQL is running.
  So here are my questions:
  1. what happens later when SQL is complete and the rear roller is not done yet?
  2. the back roller will not affect the new SQL updates?
  
  Thank you
  
  Published by: user644467 on March 11, 2011 09:37

  Dive into the concepts manual. A new concept of Oracle [url http://download.oracle.com/docs/cd/B28359_01/server.111/b28318/consist.htm#CNCPT020] concurrency and consistency, it's every (something) Gets a view of the database at the beginning of the (something). (something) is usually a transaction or statement, depending on the configuration and programming. Oracle uses system change numbers to see if each view must include a particular version of data from block, a little like a clock.

  So, basically, it all works, but you can see the performance impact just because the stuff happening, and you can see some strange effects, if you don't understand what you do. It is different from the other database engines.