locked or unlocked

Similar Questions

• "The drive where windows is installed is locked. Unlock the drive, and then try again. »

  Have a laptop Envy M6-K010DX. Due to a problem of the internet while improving to win 8 to 8.1, the PC does not start correctly, and Windows Explorer will not load. Has decided to "Refresh" of the operating system and is gone to F11 restore utilities. When I go to the utility of refreshment and follow the prompts that I reach a message that says, 'the drive where windows is installed is locked. Unlock the drive, and then try again. "I was looking for support for the unlocking instructions and apart from some commands bootrec (which did not work - probably because I don't have a Win 8 disc) not much is available.

  The only access I have for execution of orders made by the tasks Manager command-line and F11. What is this 'locked' drive, anyway? Someone at - it any information on that?

  Hello Lara.

  IF you have updated from 8 to 8.1 and the process was interrupted during installation, this may damage the disc and therefore locked error. "Refreshing" the system would not be the answer that you need to clean install Windows 8 again. 8.1 update can break the bond of the recovery partition, especially if it has become corrupted as indicated.

  You must clean up the installation with the recovery discs, you must have created before you updated to 8.1.

  In addition, if you do not have the recovery disks, you can buy a set of HP or install a regular copy of Windows 8 and then update the drivers manually. HP has the Windows key now integrated into the bios.

  This forum is used on a voluntary basis and is not maintained by the HP Support for substitution of contact.

  Your message looks like not it was even 24 hours old before you decided to delete it from the original computer?

  I'm sorry to hear you had to do this.

  If you need to HP support, you must contact them directly to your country or region.

  Contact HP-Assist phone USA | HP® official site

  Contact HP worldwide | HP® official site

  Good luck with the new computer.

  Any brand or model you purchased now, don't forget to create the recovery disks/drive.

• locking and unlocking through the command, 'cacls' locked but not unlock

  Dear Firend I tried locking and unlocking through the command, "" D:\Murali/e/p everyone cacls: n ' "

  afterwards, while liberating, he said like that

  C:\Documents and Settings\yantra > cacls d:/Murali /e /c /p yantra:F
  ACCESS_DENIED: d:\Murali

  Please someone help me

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• How to lock and unlock the computer in windows XP

  How to lock and unlock a computer with XP?

  Need to know today.

  Thank you

  Hold down the Windows key while pressing 'L '.

  "How to quickly lock your computer and use other Windows Logo shortcut keys"
    <>http://support.Microsoft.com/kb/294317 >

  HTH,
  JW

• How can I track when a PC is locked and unlocked then?

  Hi all

  How can I track what time (and how long) a PC (on a network) is locked and unlocked then (can't see anything in Event Viewer)?

  XP Pro.

  Thank you

  Try Googling for 3 third party programs that could do it.

• Bit locker encryption unlock Wizard does not, how can I open a partioned encrypted hard disk drive that is not responding?

  Original title: How can I open a partioned encrypted hard disk drive that is not responding?

  I was copying somtin in my partition of my hard drive... then my pc froze... then after I rebooted the system and tried puttin my password to unlock my encrypted partition on the hard drive, it keeps hangin' and saying "bit locker encryption unlock Wizard is not responding..."pls I need help on how to access the partition encrypted without formatting as soon as possible... Thank you

  Hi codjovi,

   

   

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Follow the steps described in the article below

   

  How to use the BitLocker Repair tool to help recover data from a volume encrypted in Windows Vista or in Windows Server 2008

  http://support.Microsoft.com/kb/928201

   

   

• How can I bitlock a device without going through the appropriate menus and related software to lock and unlock a device?

  Original title: ILO-locked usb device

  I have a 64 GB... new USB key... and put music on it. After a while, I decided to use it for another use, but could not remove the files because the device is write-protected. I never write protect anything.

  I had an individual look of microsoft cert to the USB and he said it was not locked.

  I did some research on bit locker and Win 7 Pro and discovered that I can't find the Group Policy Editor where all bit locker said tech data is located.

  So, how can I lock bit, a device without going through the appropriate menus and associated software application necessary to lock and unlock a device?

  Hello

  When you turn off BitLocker, you can either disable BitLocker temporarily or to decrypt the volume. Disable BitLocker allows TPM and other minor changes module changes the system. Decrypt the volume means that the volume will be entirely decrypted, and that all the keys are ignored. You must decrypt a computer before the operating system upgrade. Once a volume is decrypted, you must generate new keys through the encryption process again once, if you want to enable BitLocker.

  Before you start

  > You must be logged in as an administrator.

  > The volume must be encrypted.

  To turn off BitLocker Drive encryption

  (a) click Start, click Control Panel, click Security, and then click BitLocker Drive Encryption.

  (b) from the BitLocker Drive Encryption page, find the volume on which you want BitLocker Drive Encryption goes off, and click turn off BitLocker Drive Encryption.

  (c) what level of decryption do you want the dialog box, click disable BitLocker Drive Encryption or decrypt the volume as required.

  (d) by performing this procedure, you have disabled BitLocker or decrypted the operating system volume.

  For more information, see the articles:

  Turning off BitLocker Drive encryption

  How to use the unlock options in BitLocker Drive encryption?

  Protect your files using BitLocker Drive encryption

  Hope the helps of information.

• locking and unlocking of the actions and workflows in the IDE

  First thing, it is as it seems in 5.1 that the small lock icon no longer appears when you lock a workflow.  Can someone confirm for me that it is a known issue?

  Second, is there an easy way to lock or unlock all the workflow or action in a folder?  At the moment, it seems that I have to type each individually.  I thought to write a workflow to do this, but if someone has it already or if Miss me just something obvious I'd appreciate getting clued in.

  Thank you!

  Paul

  You can put the workflow in a package, and then on the package, you have the option of ' Lock/Unlock All '.

• How to lock and unlock the computer by using windows 7 prof?

  I need to show that I can lock (& of course unlock) my computer. It's a safety thing.

  How can I do this?  On the Welcome screen, it shows something to do with it, but afraid to click on it, as I don't know how to unlock later.

  Need help please.  Same thing for a computer running XP.

  Please see the answer to your other question here

• BlackBerry smartphones LOCK AND UNLOCK THE PHONE

  DOES ANYONE KNOW HOW TO CHANGE THE LOCK MODE PHONE MORE TIME?

  ON THE CURVE, IT WAS AN OPTION TO LOCK AUTOMATICALLY IN 1 HOUR, HERE IT SEEMS THERE IS EVERY 5 MINUTES.

  I'M CONSTANTLY ON THE PHONE AND CHECK, BUT THE OPTION OF LOCKING ITSELF IN AN HOUR HAS BEEN EXCELLENT SINCE I DIDN'T UNLOCK IT WHENEVER I WANTED TO USE IT.

  HE WILL WIPE AWAY INFORMATION AS WELL YOUR PHONE IF THEY TRIED X AMOUNT OF TIMES TO UNLOCK?

  Go to Options - password - security Timeout.

• Keyboard for blackBerry Smartphones locking and unlocking in my Pocket constantly on the storm.

  Problem I have is that the keypad lock / unlock at the top on the left always gets pushed in my pocket.  When this happens, all kinds of buttons are is pressed and it screwing and calling people.  I had the Blackberry World Edition where you had to hold down two keys to unlock.  Is this something I can do with the storm?

  Password, you can protect the unit.

• Lock and unlock the buttons in related specifications

  Hello

  By default for us when we add any requirement under the specification of the material, trade related specifications Spec tab by default is to show the lock button we want it to be unlock position and when I went through the config doc I saw mobile PHONES. GetCustomRevision.FormulationSpecAlternates.Default.Enabled set to true in the custom settings, and then on the release button will be there by default.

  Is - it can be done by setting up or do we need to make other changes in all other files.

  Please suggest.

  Thank you

  Rohini.

  
  

  You are right, if you set which the true will set the lock to be "unlocked".  The location you mentioned is for grid alternate specifications of formulation.

  The specification of trade has its own configs as well:

  "GSM. GetCustomRevision.TradeSpecMaterial.Default.Enabled"will control the grid of Spec material on a Spec of trade

  "GSM. GetCustomRevision.TradeSpecNextLowerLevel.Default.Enabled"will control the next lower spec trade level grid on trade specifications.

  A complete list of locations are in the Configuration page of the guide to-22.

• Lock and unlock, some fields in a form

  Hi, we need create a form that can be filled by a client, with the exception of a couple of fields that must be read-only. Then, we want to be able to unlock and fill, these fields when we receive the form in return by the customer.

  The process should look like this:

  1. Client fills out the form, with the exception of the fields read-only
  2. Client sends the form to us
  3. Unlock us the fields read-only and fill
  4. Client gets the return form (with the read only once more locked fields)

  I was googling and found indications that it is possible to achieve with javascript and a button. Is there a javascript Wizard out there who can help me?

  Thanks in advance!

  Set the fields read-only (or even under the name hidden) and then use a button (it can be transparent, so that ordinary users won't find it easily), with the following code:

  If the fields are defined in read-only:

  this.getField("Field1").readonly = false;
  this.getField("Field2").readonly = false;
  this.getField("Field3").readonly = false;
  

  etc.

  If the fields are hidden:

  this.getField("Field1").display = display.visible;
  this.getField("Field2").display = display.visible;
  this.getField("Field3").display = display.visible;
  

  etc.

• Guides of locking and unlocking

  Hello

  Hope this finds you well.

  Working in InDesign, I found that guides sometimes blocking even when I locked Guides not selected in the drop-down list display.

  Is this normal? Is it automatically defaults to locked every time?

  Also, should not also be able to unlock with the keyboard by pressing command + option +?

  Thank you!

  Two possibilities come to mind:

  Layers:

  There are guides that you add on the layers. If you have a layer with the guides on this topic is locked, the guides are locked as well (as with any other content of this layer).

  Master page:

  If you have added guides to the master page, they are "locked" as with any other element of master page displaying the page in the document spread. Those that you can release the master in the same way would release you all other objects.

  HTH

  -mt

• What model of 7 Iphone at the apple store online? locked or unlocked?

  I plan to buy an iphone 7 on the apple store online to Singapore. I want the unlocked model. I want to know what model apple will deliver to my home? According to the website A1778 is the unlocked that works with my carrier. shows the GSM model. can someone tell me pls if apple will deliver the right model or is it possible that I can choose my model number?

  Apple will deliver the unlocked model that you can use with all networks mobile in Singapore and most mobile networks around the world. Do not worry.