Locked out my bluetooth speakers, how can I make them work again?

Similar Questions

• My SD card reader and USB 3.0 Hub have left both answer but see the place in the information system. How can I make them work again?

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. They hub and drive appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the hub and the reader? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Mass storage device:

  Product ID:0 x 1000

  Provider ID:0 8564 x

  Version: 11 h 00

  Serial number: 45H3PTDPV3XSLHKB

  Speed: up to 5 GB/s

  Manufacturer: JetFlash

  Location ID:0 x 14500000 / 9

  Available current (mA): 1800

  Current (mA): 76

  Additional operating current (mA): 0

  Apple keyboard / Trackpad:

  Product ID:0 x 0259

  ID:0x05ac of the seller (Apple Inc.)

  Version: 2.24

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14400000 / 2

  Available current (mA): 1000

  Current (mA): 40

  Additional operating current (mA): 0

  Built-In: Yes

  BRCM20702 Hub:

  Product ID:0 x 4500

  Name of the vendor ID:0x0a5c (Broadcom Corp.)

  Version: 1.00

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14300000 / 3

  Available current (mA): 1000

  Current (mA): 94

  Additional operating current (mA): 0

  Built-In: Yes

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  Manufacturer: Apple Inc..

  Location ID: 0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Integrated: Yes

  Model name: MacBook P

  A simple restart of the machine is reset.

  On the hub to try another cable and a different port if possible.

  The SD is constructed in the?  It can be a bit fussy, Reseat the card with a purpose, repeatedly if necessary so that it can recognize it.

• my computer laptop bluetooth was working but suddenly it stopped and I don't know why... How can I make it work again please!

  Original title: quick help please :/

  my computer laptop bluetooth was working but suddenly it stopped and I don't know why... How can I make it work again please!

  Hello

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Add a BlueTooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  BluetoothLogView is a small utility that monitors the activity of Bluetooth devices around you,
  and shows a log of Bluetooth devices in the main window. Each time that a new Bluetooth
  device coming to your area and when the unit comes out of your area, a new journal line is added with
  the following information: device name, time of the event, address, Type of event ("peripheral
  Arrival' or 'Device left'), Type of aircraft and the company that created the device. BluetoothLog-
  View you can also specify a description for each device (according to its MAC address)
  that appears in the column "Description". -FREE
  http://www.NirSoft.NET/utils/bluetooth_log_view.html

  ---------------------------------------------------------------------

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My webcam does not work. How can I make it work again?

  -Very well, so I have a Gateway computer, T-Series, not exactly that model because when I sent the computer geek team, they covered the sticker on the bottom that tells you what it is, but that should not be too significant. Thus, the original hard copy of this computer died earlier. I took the hard drive on an HP failure and after I installed all the drivers on the right, the computer works perfectly, the hitch is that the hard drive it's a HP photo and not a bridge. The point being, my gateway integrated webcam does not work without the driver (of course) and because the hard does not know that the computer has one, I don't know which driver should I download. If anyone has any information on the gateway series T, as those who had webcams and how webcam can be in the computer, so that I can find the driver for that it would be useful.

  EDIT: The laptop is a gateway series W350a T with a 1.3 Megapixel WebCam. If you guys can offer any help, please do.

  These links do not help me that the computer is running Windows Vista, not Windows 7 which you would know if you had paid attention to what it has been marked to the title.

  Also, in my edit, I added that the computer was a W350a. At this point your suggestions don't help me because after more than an hour to keep searching, I finally found a picture of the T-16 of the gateway that is my model exactly. After another 20 minutes of research I discovered a link to the website of gateway directly to the page where this computers drivers. I downloaded the Chicony WebCam Assistant and viola, problem solved.

  Thanks but no thanks for these suggestions, so they're as bad as, if not worse than what I would have gotten if I had called the bridge to help Customer Support. The only difference is that I wouldn't have to wait a day for this stupid proposal, I would be immediately obtained.

• The HDMI port on my Geforce 315 graphics card stop working. How can I make it work again?

  I have the secondary display to VGA reading, but my T.V. HDMI use. When I tried the DVI/HDMI adapter, it did not work

  How to find my abilities of HDMI port?

  Hello

  ·         What happens when you connect the Geforce 315 graphics card?

  I suggest you update the video drivers and then try to connect the HDMI cable follow the steps in the link below to update the driver:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• I recently bought 13 Photoshop elements for windows. My Version Set commands are not alive.  They are light gray both edit and display in the media section of the Organizer.  How can I make them work?

  Everyone knows this and if yes, how did you it works?

  PSE13 presents a new exhibition of miniatures: the speculative point of view. It is active by default. The thumbnails are resized to fill completely the 'media' section; the positive side is that it shows more thumbnails or larger; This is very useful for Visual browsing and research. But it masks the texts (name of file...) and version sets icons.

  Just go back to the old 'detailed view' in the view menu or remember the shortcut: Ctrl D. Your choice will stick the next time.

• I can't use the Norton Toolbar in Firefox 4.0 because he says they are not compatible... How can I make them work?

  The Norton toolbar and the latest Firefox I had worked very well together, however, when I updated Firefox, as the information yielded, he told me I could use is more the Norton toolbar because they were not compatible. He said that, even if two of them are updated.

  You will need to contact Norton on their plans for support to Firefox 4. It is quite common for businesses don't support a new version of a browser after that that it has been officially released, and it is not supported for the candidate/beta phase.

• When trying to open Photoshop it says it cannot start my subscription, even if it is paid for. How can I make it work again?

  I have a PC and I got my subscription from January or February and it was working fine until a few days ago, when randomly, it no longer works and gave me this message when I tried to open it. Later yesterday, he sent an e-mail to confirm my subscription bill Photoshop had been paid, so I know that the subscription is still intact - it's just not let me use Photoshop.

  Launch the desktop creative cloud application. If you are asked to log in, it is an indication that your account is not active on this computer.

• Hi, I have lightroom 6 and try to make a pano with "merge &gt; Panorama Photo" 5 photos is grayed out, how can I make it work? Can anyone help?

  Hi, I have lightroom 6 and trying to do my first pano with "merge > Panorama Photo" 5 photos is grayed out, how can I make it work? Can anyone help?

  Hi Lili,

  Make sure that your program is updated to 6.5.1: keeping up-to-date for Lightroom

  and your GPU is supported: Adobe Lightroom GPU troubleshooting and FAQ

  Concerning

  Claes

• Hi I have Lightroom 5.7.1 and try to make the panorama.  Photo/Edit in watch upward but somehow "Merge to Panorama in Photoshop" is grayed out.  How can I make it work?  How can I make panorama to 5.7.1?

  Hi I have Lightroom 5.7.1 and try to make the panorama.  Photo/Edit in watch upward but somehow "Merge to Panorama in Photoshop" is grayed out.  How can I make it work?  How can I make panorama to 5.7.1?  Can anyone help?

  Seriously Teddy5555, this isn't a problem with Lightroom.  If PhotoShop is not installed on your computer, then you cannot directly photos to edit in PhotoShop, nor can you merge to Panorama in PhotoShop.  If it is not installed, you must install it to make it work.

  6 LR and LR CC 2015 have the ability to merge with a Panorama in LR itself as shown below, but I don't remember if it was available in LR 5.

  

• In my laptop, when I open the itunes window there is an option 'Internet Radio' to listen to the different type of music. This "Internet radio" function can be used on my iphone5? And if so, how can I make it work?

  In my laptop, when I open the itunes window there is an option 'Internet Radio' to listen to the different type of music. This "Internet Radio" function can be used on my iphone 5? And if so, how can I make it work?

  No more. It merged with the Apple's music.

• changed provider of wired broadband to another company offering wi - fi access. Outlook Express 10 stopped working. How can I make it work on a wi - fi connection?

  changed provider of wired broadband to another company offering wi - fi access. Outlook Express 10 stopped working. How can I make it work on a wi - fi connection?

  Hi JamesAthanassiou,

  What is the exact error message that you receive when you try to access Outlook Express 10?

  You can try to repair Outlook express and check if it helps:

  An Outlook Express basic repair kit

  Reference: OLEXP: Outlook Express stops responding and your pointer appears as an hourglass

  Hope the helps of information.

• Homegroup that my pc can't find the other pc, it seems that the Peer Networking Identity Manager service is not running. How can I make it work

  I lost contact with other computers in collective housing. It would seem that the Peer Networking Identity Manager service (p2pimsvc) does not work. How can I make it work?

  Hi Ken Jones571,

  ·         Did you do changes on the computer before the show?

  I suggest you to set the service to automatic and check if this is useful.

  a. click the Start button and type Services in the Start Search box and press enter.

  b. find the Peer Name Resolution Protocol (PNRPsvc) services or services Peer Networking Identity Manager (p2pimsvc), set it to Automatic to clicking on the service and selecting Properties and change the Startup type to Automatic.

  Method 1: I suggest you try a clean boot and check if the problem persists in the boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 of the article mentioned above.

  Method 2: It could be that the NVRP svc and p2pimsvc is corrupted, remove entry can help you solve your query. Check the following location and delete the file idstore.sst

   

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OSH

  Let us know if that helps.

• When I opened the app, it says "error16", how can I make it work?

  When I opened the app, it says "error16", how can I make it work?

  Error 16 http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

  -including DW039, https://forums.adobe.com/thread/1500609

• I have a license an image to stick to adobe, but the watermark still appears. How can I make them disappear?

  I have a license an image to stick to adobe, but the watermark still appears. How can I make them disappear?

  Hi samanthal7847575 ,

  Follow the link below for re - upload images of the.

  https://forums.Adobe.com/thread/2012748

  In the case of any questions, please try switching browsers.

  We know, if it helps.

  Kind regards

  Sachin