Locked user account

Similar Questions

• How to unlock a locked user account...

  I don't have a single user account, an administrator, and he has always been unlocked.  But the other day, I tried to access the Task Manager and he told me it had been disabled by the administrator, but I and I did that.  I disconnected and when I logged in I noticed that my the deu was being blocked.  I can't understand how to unlock the user account.  Please help me.

  http://support.Microsoft.com/kb/242917

  Cannot lock a "locked" computer administrator

  See you soon. Mick Murphy - Microsoft partner

• Export the locked user account.

  Hi all
  
  Export of the locked using sys user account account take?
  
  Select the username, account_status from dba_users;
  
  .....
  .....
  Locked SCOTT
  .....
  .....
  
  
  exp sys / * as sysdba owner = SCOTT leader = scott.dmp log = scott.log
  
  It will give an error?
  
  
  
  Kind regards
  Prasanna

  Prasanna Vinet says:
  Hello

  Here I have not test DB... all production DBs are being checked. If this is not possible.

  It's a bad idea to run processes untested against the production of databases, verification or audit.

  Yes, you can export a user locked under user SYS.

  See you soon,.
  Brian

• Locked user account, administrator access

  My user account on my laptop had its password changed without my permission, and there is no option to access the administrator account from the logon screen. I can't restart in safe mode because it requires me to log on and I do not know the password. I tried to recover the last known good configuration, but once more he invites me to log in again. no command prompt either.

  My question is: can it be fixed, if not, how do I restore the computer to its original settings?

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  __________________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Password accepted but does nothing (admin) user. Locked user account? How can I register as a Admin to change?

  Had problems with Solution Explorer. While changing this and that, I blocked the user accounts. My password is not rejected, but does nothing. How can I get as long as a tool fix my problem?

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  [Note: do not enter the brackets!]

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Remove the installation/rescue DVD and restart the computer. Now, you will be able to log on to the built-in Administrator compatible account now and make your changes. Once you have fixed things, connect to your additional administrative account (implemented by the recommendations below) and disable the administrator built-in again for security reasons.

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
  MS - MVP - Elephant Boy computers - don't panic!

• Locked user account and connect on demand

  Hi, any omniscient! :) I'm sorry for my bad English, but I have a question.
  
  Why is able to connect to an Application user using Builtin ApEx Authentication Scheme, when this user's account is locked? We see that in the ApEx 3.1, 3.2 (and I think, ApEx 3.2.1 has builtin regime too).

  As a workspace admin Home > Administration > manage Services > Set Workspace Preferences and ensure that the account Expiration and locking is set to enable.

  Scott

• How to find out which locked user account

  We had production type schema locked account this morning. I checked the profile which this user belongs and it has 3 times for connection attempts failed. My question is how to know what the user had 3 unsuccessful login attempts and block this account.
  
  Version Oracle 8.1.7

  Use them views DBA_AUDIT_SESSION or DBA_AUDIT_TRAIL (I suggest to use the former).

  Justin

• How to keep a locked user account after Idle

  My current workplace just upgraded to Windows 7 for most of our computers from the workspace, and with computers communial there is now a problem where if a user doesn't log out and leave the computer hangs on their account on the login screen from which allows us to change user. Hard reboot the computer it unlocks and allows to change username, but given that some of the computer towers are located in other areas at the office, it can be irritating. What are the settings we have to change in order to prevent computers snaps and instead of us giving the ability to simply change user if someone forgets to sign out?

  Control Panel / Power Options / request password on wake up.

  Note: Your IT Admin might have prevented you to make changes for security reasons.

  J W Stuart: http://www.pagestart.com

• Windows SteadyState and MSE for locked user? Locked user _save files on the desktop? Add the locked user language

  I use Microsoft Windows XP SP3 and Microsoft Security Essentials.

  I did 2 locked users:

  1 locked with custom Restrictions user running Internet Explorer and other Internet browsers, write and draw and nothing much and is welcomed by right clicking on the program icon only run under other Creditentials.

  2 power User, made from MMC with Chater way to have more power that any user who can not only surf the Internet, but also play games online, and this user is also locked.

  My question is: how to make 1. User has locked protected with Microsoft Security Essentials, cause seems MSE is not protect this account, and I can't be sure because of the locked account cannot see even if it is protected, I put MSE on startup but that does not put MSE icon on the taskbar. If it is not protected is not a good cause for the idea that the user navigates Net.

  Another thing I want to do:

  For both locked users able to save files to the desktop and I have it unchecked in Windows SteadyState, but when I connect them and when I log into files are not saved on their desktop computers. So what is the point of selection/deslecting in sign of Restriction if the files went once they logout?

  I wanted to do administrator can retrieve files from their office soon logs in.

  Is - it possible and keep them locked?

  One last thing - since English isn't the only language to be used on 1 locked user account

  How can I put language so that the user can switch between EN and another language

  Thank you for your replies,

  Hi Jade000,

  I recommend you ask your question in the forums of SteadyState for assistance.

  Hope the helps of information.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blocked from my user account.

  How can I get rid of the requirement for the administrator?  I did something called my current user - me - as an administrator and I can not enter my user account.  I have to use the comments.  Of course, I have no password because there wasn't ANY administator and suddenlty there.

  It happened when I was doing 'improvements' Explorer 9 - he go so messed up, I had to do a restore and now I have no idea of what I have, but I'm afraid to do something different.  I use the 'Guest' user because I can't open my user account.  As you know this means I can't access my files.

  Somehow in this process he appointed me, Gerney Lee, as administrator.

  Hi, you could go to mode safe mode with networking

  How to: restart the computer, while the computer restarts continue to hit the F8 key > and then you will see a screen black with a title "advanced startup option" you'll see there select Safe mode with network, and then press ENTER. Once the computer started in safe mode with network you will have 2 useraccount, yours and admin (pass not required by default in safe mode) > using the admin on safe mode, you can create another user account that has admin Privilege, then you can access your files from the locked user account.

  and also if you think that IE9 is the problem again on safe mode, you can go to add/remove programs, and then uninstall it.

• User evolution ORA-06550 APEX 4.1.1 with the internal admin user account

  Hello
  
  I don't know when this error came first, but when I try to change the properties of a user in the workspace with the 'internal' working space ADMIN user, I get the follwing error:
  

  ORA-06550: line 86, column 7: PLS-00103: Encountered the symbol “IF” when expecting one of the following: ; <an identifier> <a double-quoted delimited-identifier> The symbol “IF” was ignored. ORA-06550: line 90, column 1: PLS-00103: Encountered the symbol “END”

  In my case, I tried to unlock a locked user account. It's used to work before!
  
  Note: to work around the problem, I managed to unlock the user account with another admin user created in the same workspace as the locked user...
  
  Is this a bug since 4.1.1?
  
  Thank you
  Matthias Hoys
  matthiashoys.WordPress.com
  
  Published by: mhoys on March 22, 2012 09:56

  Hi Matthias,

  Thanks for the information.

  The Group of patches to update a clob column in our metadata. The clob itself string is syntactically correct, it's why you didn't see any errors during the installation. However, within the chain, there is a space character where a line break should be at the end of a single-line comment:

  -- ...comment...
  --  ...comment...     if :P23_ADMIN = 'Y' then
    ...
  end if;
  

  Instead of

  -- ...comment...
  --  ...comment...
  if :P23_ADMIN = 'Y' then
    ...
  end if;
  

  Block PL/SQL that ran on submit, and now the 'end if' missing have 'if', where the runtime error.

  We've just uploaded a fix for this bug (13878034) to support, it should be available very soon.

  Kind regards
  Christian

• 'File name' is locked for editing by 'Client', why not show the correct user account

  A .xls file created by MS Excel 2003 and saved on the server files (Windows Server 2008 R2 without Service Pack).

  We have two users: A and c. accounts of A and C join same above file server's domain. A approval of the admin on the server, C is a common user. The version of MS Excel on the pc is 2010, although it is 2003 for C.

  C tries to open a file on the server and it has the change permission on the file and the file, however, the file is locked for editing by 'administrator '. For the moment, no one opens this file, so which is 'Administrator'?

  More tests:

  (1) once A open file C is reached, there is message: file is locked for editing by 'Client', so why shows 'Client' instead of a correct domain account?

  (2) after C opens the file and then A is reached, there is message: file is locked for a domain C user account. So it seems OK.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• All locked or disabled to restart user accounts

  I was faced with a problem with my user accounts getting locked out/disabled every time that I reboot my system. I can't start in safe mode, I can't run the system restore, I can't do anything but run a startup disk that will allow me to unlock locked accounts and remove the passwords so now that I'm stuck without the disc I'm totally locked out of my system.

  I am not connect to any network or something like that so they aren't locking me. I think it's Windows or a virus, but I've scanned several times my virus from the system.

  I realize maybe there's not much I can do until I have retrieve the boot disk, but I want to solve this problem, so it is not keep happening to me.

  Hi Mchase34,

  You will need to make arrangements for the drive of the Windows operating system. Once you have the startup disk, and then follow the article in the Microsoft Knowledge Base.

   

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Hope this information helps.

• Lock the accounts of users without apparent reason

  I have a XP laptop with several user accounts that require a password to connect.  Some of these accounts are defined for the user to change the password at the next logon.  The rest of them have already been modified by the user.  I have a user account with admin further rights to access the built-in Administrator account.

  When I started to work on this computer, check the status of all these accounts.  Often, some or most of them is locked.  I unlock all accounts and then do my work.  Before I stop I double-check these accounts and sometimes a lot of these accounts have already locked.  My own user account also locks and I have to CTRL-ALT-DEL twice on the screen to enter the built-in account.

  Local policy is set for the passwords expire after 180 days and for account lockout after 3 attempts.  The accounts that have recently been consulted properly are being locked.  Any ideas?

  Thank you.

  I have a XP laptop with several user accounts that require a password to connect.  Some of these accounts are defined for the user to change the password at the next logon.  The rest of them have already been modified by the user.  I have a user account with admin further rights to access the built-in Administrator account.

  When I started to work on this computer, check the status of all these accounts.  Often, some or most of them is locked.  I unlock all accounts and then do my work.  Before I stop I double-check these accounts and sometimes a lot of these accounts have already locked.  My own user account also locks and I have to CTRL-ALT-DEL twice on the screen to enter the built-in account.

  Local policy is set for the passwords expire after 180 days and for account lockout after 3 attempts.  The accounts that have recently been consulted properly are being locked.  Any ideas?

  Thank you.

  Hi, Frtundra,

  False lockouts can occur if you set the LockoutThreshold registry value to a value less than the default value of 10.

  http://TechNet.Microsoft.com/en-us/library/cc737614 (WS.10) .aspx

• Machine is locked with a user account

  Hello

  I'm a system administrator. I will check, if a machine is locked with a user account or not connection of the device by remote control tool.

  Is there any tool to run from my machine to check that a machine is in disconnect status or locked with an account. It will help solve the problems and avoid the time Delisle

  Kind regards

  Carter S

  Hi Cedric,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the Sub forum. Link:http://social.technet.microsoft.com/Forums/en-us/winserverTS/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.