Locking on the dv7-4165dx function

Similar Questions

• Can I set up my HP dv7-4165dx to boot from the second hard drive?

  I got a HP dv7-4165dx for about 20 months now. Ten months in the original hard drive burned due to setting up directly under the GPU (lower left corner, to the left of the touchpad and under the keys), which gets quite hot on the top to make your uncomfortable hand. Symptoms include blue screens, troubled during start-ups, as well as a message from the system at boot that said the car was damaged. As it was under warranty, I brought it to Best Buy to get the drive replaced, which took about 2.5 months.

  Now, about 20 months, I face at the beginning of the exact same symptoms. I noticed that there was a second HDD Bay, away from the GPU, so I bought the yarn necessary to the use of this Bay. Now, he tells me that there is no installed boot drive (the hard drive test in the system diagnostics, knows that it is there). I'm sure that I can swap the drive towards the original Bay and be fine but that puts me $ 75 for the HP kit (Yes, I know I might have to eat that, if there is no way), but much more importantly, this means that I will have an another burned (losing everything, even once) by car a month or two.

  I looked, but I can't seem to find a way to tell it boot from that drive. Is it possible, or am I just out of the eye due to bad design? It has been a great machine, except for this problem.

  Hello

  Unfortunately there is no option to boot from the HARD drive in the 2nd Bay in one of the series dv7 - sorry for the bad news.

  Best regards

  DP - K

• Re: I lost the Flash Card function keys

  Ive lost the flash cards used for the drop-down list at the top of the screen. Tried several different things, including updating the drivers from the Web site.
  At the moment, some of the function keys work ok, IE works brightness, lock - but the wireless economy and the key is more energy.

  Have you tried to reinstall the package of added value?

• How to table of waveform of input 1 d in the lock with the amplifier

  I have a LabView application that I have to change to include a lock in the amplifier.  The application uses a capture card of data several times to capture a sample of 0.1 s of two signals (one signal, a single reference) in a laboratory test.  Before the measure was made by the base RMS module to record the VRM in the signal, and the reference is ignored.  However, the measures that I am now the scene run many s a lower and so I would use a simple RECS in the kit OR of.

  I am happy (I think) with the configuration of GARLIC but I am struggling to understand the requirement of input data.  It should be an array of 2D, with the identifited of reference signal.  However, the output of the part of the utility that captures the waveform is a table 1 d of waveform.  Could someone advise me on how to convert the table 1 d of waveform in a 2D table suitable for admission to the GARLIC?

  As you may have guessed that I am a newbie to LabView, I try to modify an application designed and assembled by a former colleague, so I'd appreciate simple suggestions!

  TIA.

  You have separated for each signal waveform 1 d arrays, or do you have a 1-d single waveform chart where signals are separate items in the table? If this is the first, you should do something like the code below. If you have a single Bay, then the code would be similar - you could just use a table of unique Index function. You may or may not need to transpose the table 2D. I don't know what waits for the lock in Subvi - channel data by row or column.

  

• HP Pavilion dv7-4165dx

  I'm looking to improve the memory from my laptop to the 4GBs original to 8GBs. I tried to know what was the fastest memory it would take. I have not found or have simply forgotten what tells me this information.

  Hello

  Copy the following information:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+dv7+series/Pavilion+dv7-4165dx-upgrades.html

  It may take a faster RAM but does not work fast spped.

  Kind regards.

• HP pavilion dv7-4165dx: spdriver_1.37.0.193 drivers not plug-and - play doesn't work

  Status of the device: this device is not present, is not working properly or is not all its drivers installed. (Code 24)

  My graphics cards: AMD M880G with ATI Mobility Radeon HD 4250

  Operating system: Windows 7 32 bit

  I haven't changed anything on the system and the drivers when the problem appeared, nor detected no sign of the performance problem, but I found this alert in device manager.

  Please advice solution. Thank you.

  Hi SoulOfWater,

  Thank you for your answer, I am sorry that did not help.

  There are recent changes to your system?

  Have you checked against viruses and malware?

  Try this step.

  Go to the command prompt run command and type

  Right click and run as administrator

  Type sfc/scannow, and then press on enter

  It will look for corrupted files and try to fix them

  Here is a link to the Drivers of HP Pavilion dv7-4165dx Entertainment Notebook PC. Please make sure you have the latest drivers.

  Try to delete the driver from Device Manager (not just uninstall)

  Restart your computer and run the HP Support Assistant to update the drivers again.

  If that did not help. You can try to install the original driver of Recovery Manager.  Using the Recovery Manager to restore the software and drivers (Windows 7)

  If you are still experiencing a problem, try a restore to before, it happened.  Using Microsoft System Restore (Windows 7)

  If it is still not resolved, I suggest that perform you a recovery to factory.  Performing a recovery of system HP (Windows 7)

  During the recovery process, you will receive an option to backup your personal files. If you have not already done one, I suggest you do one now to avoid any data loss.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

  Alternatively, you can contact HP support for assistance.they have the ability to access your system remotely to help locate and solve problems.

  Please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number   Technical Support site map

• Smartphones blackBerry - no locking of the keyboard help

  Hello

  I just updated my software for the v50.0.862 (Platform 5.1.0.175) and now I don't have a keypad lock icon.

  Any ideas?

  Thank you very much

  Hi and welcome to the Forums!

  If I recall, you have upgraded to the point where the locking functions have changed. Now, the real keyboard lock is the button locking real on the side or on the device... but this is simply a keypad lock and committed is no longer the password (if you have one). If you assign a device password and wish to lock with the password until the expiration time has been reached, you must use the "Password lock" icon which should be on your BB (look around and turn on "Show all" or "Show Hidden").

  Good luck!

• How * disable * the touchpad power function?

  Hi, I have a craving dv7 and it has a function whereby if you press twice on the left upper corner of the touchpad, it switches it on or off.

  I want to DISABLE this feature, because I'm constantly tripping by accident in the normal conditions of use and so am always disable the touchpad and have to tap twice again to reactivate.

  I looked online and the documentation but have found no way to disable this feature.  Does anyone know how?

  THX,

  Chris

  FYI, I contacted HP Support and they sent me the following, which tells how do.

  If it please click on the links below and follow the steps mentioned in the Web page under the section adjust single and double tapping.

  http://support.HP.com/us-en/document/c03523373

  Unlike in the image settings window the touchpad in the link above, the settings window of the touchpad on the dv7 want is not an expandable tree for tapping settings, but it has an icon of the gear to the right that if clicked, opens another window of dialogue that has a checkbox to enable/disable this feature.

  Chris

• Cannot delete files locked in the temp folder

  I emptied regularly delete all files in the temp via the function folder in the Tools menu of IE9 and also by searching on folder and deleting the contents of the temporary Local AppData file in the users folder.

  Ten days ago, I found there are some files in the folder temporary AppData that were locked and could not be removed. This only happens in a user account, and this isn't an administrator account. Opening of properties on any of the files by checking the Security tab, I find I am wierdly the sole owner of the file, but have limited permissions. I tried to change the permissions to get total control and then remove the file, but that did not work, nor has anything else I could think of. This included the stop of all open applications and disconnects all users.

  Other file properties:

  -Open with "Windows Shell Commo" - little matter that is.

  -Similar names to ~ DF38C18158B32C1039. TMP

  -Attributes: ATI

  -The size is small (512 bytes, for example)

  -No previous versions

  Normally the files in this folder have names like this except without the ~.

  After having in vain tried everything I could think of to delete these files, I downloaded Revo Uninstaller, who managed to remove all the files locked in the record at the time.  However, the problem resurfaced shortly after and this time Revo Uninstaller did not work.

  I spent a few days of research on the net and try different options without success until I stumbled on a recommendation to go into Control Panel, search for Java, open its settings menu and refuse authorisation for Java to back up the data on my computer.  It worked - I went back in the folder, the files were no longer locked, I was able to remove them as I usually do and I had no other problems with the locked files. Until yesterday.

  I double-checked the settings of Java to ensure that authorization still denied to save data on my computer. I don't remember now if I set permission to refuse when I checked again. I tried then to Revo Uninstaller again, but he failed again to remove these files locked. I noticed today that the date for all files is last July 15.  It seems (so far) no new files have been generated, but I still cannot delete locked files 51 of my computer.  My biggest concern, obviously, is security.  I don't want to locked files including origins, functions and activities that I do nothing on my computer, especially if I'm unable to remove them.

  I want to know how to remove these files, what caused do them appear in the first place and how to prevent them from happening again.

  Thank you!

  Thanks for this suggestion, Oberwald. It came a little too late, however.  Finally, it occurred to me to try my anti-virus software file shredder function and he managed to remove the locked files.

  I believe now these locked files were likely due to some kind of malware - after shredding, my desktop Recycle bin flashed repeatedly icon when I shut down the computer. Also, after have logged you in today, I find everything runs much faster and no sign of keylogging.  Seem to be back to normal.

  I was able to save the link and it will try in the future if necessary.

  Thanks again!

• error: toshiba mk6465gsx ata device on my HP Pavilion dv7-4165dx Entertainment Notebook...

  I get an error: toshiba mk6465gsx ata device on my HP Pavilion dv7-4165dx Entertainment Notebook.

  I don't know how much it will cost to get replaced, nor which breaks its failure. The Geek Squad Agent I spoke with said that this failure can happen to new machines, even in a month. It's really random.

  Knowing however the problem will help you to get an estimate over the phone or through music online with an agent.

• iOS 10 no locked out the flashlight and timer on screen

  In the previous version, I could pull up to the bottom of the screen locked and the timer and the flashlight were some of my options, as well as the brightness and change setting, if you're going on a plane.  I don't see how more intuitively.  The great thing now seems to have widgets and you can buy, but none of the above are options and those are the characteristics that I used often on my phone.  I liked that I could set the timer when watering my yard without having to unlock my phone whenever I moved the sprinkler.  Please let me know if Miss me just something.

  Thank you!

  The control centre has now three components. One with the parameters you want is on the left.

• I can't save the messages in the sent folder, there is a lock on the file name

  the messaging engine Thunderbird ceased to save emails in the sent folder, when I checked the sent folder, it was a symbol of lock at the beginning of the queue file. and an error came up saying "error copy sent the file.

  The padlock, which indicated it still, the account uses a secure connection.

  Now

  So that we can better investigate this problem, you need to add a little more non-personal information.

  Please add the troubleshooting information to your post
  To find troubleshooting information:

  • Open the help (or click Help three-line-icon and select)
  • Choose troubleshooting information
  • Use the copy button in the Clipboard to select them all. Do not check box "include account names!
  • Paste this into your post.

  Please also add the result of these troubleshooting steps to your message

  • Thunderbird works in mode Safe TB (see Thunderbird Safe Mode)?
  • Do you use anti-virus software and firewall? What is the version?
  • Who is the email provider?
  • Who is the provider of the internet?

  Please post back with that information and any other questions you may have.

• I was on Redbox and accidentally disabled the part location function. How to re - activate this?

  I was on the site of Redbox and clicked on DVD to find nearby and accidentally disabled the part location function. Anyone know how I can reactivate this function?

  You can also check specific permission settings by using the permissions of the Page Info dialog Committee. While on the site, you can call this using one of these:

  • Right click and select View Page Info > permissions
  • (menu bar) Menu Tools > Page Info > permissions
  • Click the icon of padlock or globe to the left of the address of the site > additional information > permissions

  Scroll down and look for "access your location. If it is set to block and you want to enable it, you can make the change. (If necessary, uncheck the box to activate specific use default settings.)

• How to remove the automatic locking of the IPad 2

  How to remove the automatic locking in the iPad 2

  Are you talking about the time it takes the device "go to sleep?

  Settings > general > auto lock > set to 'never '.

• I can't access my iMac, is locked and the keyboard will not connect. Magic mouse works OK. What should I do?

  Hello, how can I access my iMac that is locked and the keyboard will not match (new batteries and LED is blinckin). The Magic Mouse works OK. What should I do?

  Buy or borrow a USB keyboard and connect you with that. Once logged in go to your bluetooth preferences and pair it with the keyboard.