Similar Questions

• Windows 7 pro install without admin password

  Our former it Director took the password admin with him. I need to reset the admin password, or perform a complete Windows reinstallation 7 pro. Suggestions how to proceed?

  You will need to perform a new installation.

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• OfficeJet 6700: upgrade after Windows 10 - locked by admin password

  After the upgrade to Windows 10 all functions under "Settings" are locked and the error indicates "this function has been locked by your system administrator or the person setting up the printer" I have never implemented or locked these functions. I understand that it is a known HP printer after upgrade to Windows 10 error. Restoring default values does not either because the feature is locked. I need to fix this or get a new printer from another provider, thanks.

  Hi @VIKING00,

  I can honestly say I have not heard this before going on as a result of any upgrade, but that being said, I've heard of the error, "this function has been locked by your system administrator or the person setting up the printer" and I am confident, I can help you.

  rather than restoring to factory settings, I would like to reset the printer completely. I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Printer resets: What You Should Know by @Bob_Headrick

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

  Please return to this forum thread to let me know if this reset solves the problem, as I expect it. Thank you.

• Laptop Pavilion g6: how to clear the admin. password for the installer

  After you have set the admin. password has decided to disable or 'clear '. I am able to change it but not delete or disable.

  No help for it?

  Thank you!

  Hello

  You can remove the need for a password as follows.

  Shut down the laptop.  Now on TAP the ESC key as soon as you press the power button to access the start menu, then select f10 to open the Bios menu.  Use the arrows to select the Security tab and press ENTER.  Use the arrow keys again to select the password option and press ENTER.  Enter the current password and then the new password, simply leave this blank and press on enter - do the same for the confirmation field.  Press f10, select this option to save the new settings and press to enter.

  Kind regards

  DP - K

• No admin password... repair at a standstill

  I tried to repair a hard drive that has kept a loop at startup after post. He would get for posting, you'd hear the beep and then screen turns off and it would start again. I put the XP installation disc in and then when the screen came up, I selected the option "repair". When installation is entered in the command prompt mode, he asked what installation number (I think) and I hit 1 (could have file number, Im not sure), then the command prompt was asked the admin password. I don't remember still using the admin account I have access to all of my user account and have never been invited to use the admin account and I know I never set up a password for it. In any case, at this point I was puzzled because I couldn't go any further. I have supplements a kind of default admin password that is there? I looked in the BIOS and no unit admin password it.

  Anyway, it wasn't really important data there so I restarted and when prompted by the installation cd, I chose installation. Then, a message comes on the screen saying it found another version of windows xp there and she had selected in a box. He asked me to select the version in the box and then I chose the repair option. Then he went through and just instaled the version on the disk.

  so my questions are; How do you get by the admin password prompt when you do not for the admin account?

  Also;  If there is data that I wanted from the disc and it does not start on the desktop, it tried to repair the current xp or boot sector, etc., after the admin password has been given? I take the computer repair & service race and I think that after the admin password prompt, I could have selected fixmbr or fixboot from the command prompt to try to repair the current version. I think so (please tell me if im correct) I could have copied the data I wanted to stay on a USB key or other medium? Pleae let me know... I have apreciate your help. I would like to know for next time if I have a client in the future and I want to do this same type of repair.

  Thank you

  If you did not set a password (and many people don't) then you simply press When prompted for the password.

  There are a handful of commands that can be run from the Recovery Console without the need to connect to the installation. Fixmbr and Fixboot are two of them.

  John

• After recovery, admin password information with 'points' and impossible to remove or change

  Hello.

  I ran yesterday, updates of Windows 7 but only those necessary.  I do not have one of those as an option.  After the updates completed, I turned on the computer and he was stuck in a loop cycle - from windows, then the admin password, connect you box came.  The box was fiiled in (with "dots" but too many to represent my password) and the screen just quickly flashed back & forth between the login screen and 'incorrect password '.     I tried to change username, and it flashed back into the admin log.

  I did a system restore to the factory settings (after saving all data) using the recovery discs.  After recovery, the screen "Set a password for the account" comes with the box below "Type a password" completely filled with dots.  I can't delete them with the BACKSPACE or DELETE key.  If I put highlight and then try to erase it with BACKSPACE or DELETE, the cursor just moves on the right side of the password box, but it is not always remove the defective "dots" password so that I can change.

  I tried to restart with the power and then switch on again.  After selecting the country & language again, same password screen developed.

  It's stuck!  Any help would be greatly appreciated!  I have computer I have is the HP Touchsmart 310 1155 - Y.

  Thank you!

  It's curious with a recovery.  First, try to reset the password using NTPassword.  Do the boot CD that him following the signs.  If this does not resolve the problem of signon, think to install the operating system from a typical drive of Windows 7 to the same version, using the key of the COA sticker.

• Laptop HP 2000: HP Notebook 2000-power on password/admin password: deactivated after 3 attempts.

  Laptop requires power-on password/admin password; system becomes invalid after 3 password attempts failed.  The disabled system code is: 95840774.

  Model # = HP 2000-bt69WM

  Product # = C2M21UA #ABA

  Serial No. = [personal information]

  Your help in this matter will be greatly appreciated!

  Sincerely,

  kt10doll

  Hello.

  Come in:

  20728370

• I forgot my admin password need to install the new program need help please.

  I forgot my admin password, have tried several times but don't remember. I need to install a new program as soon as possible and need assistance please.

  I forgot my admin password, have tried several times but don't remember. I need to install a new program as soon as possible and need assistance please.

  Sorry, we are not allowed to help users to bypass the password protection, regardless of what are "reasons".
  Here's the Microsoft Policy about this:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Dell your 2161DS remote console switch cannot change the Admin password after updated to the latest Firmware

  Dear Sir:
   
  After having updated the latest Firmware [Dell your 2161DS digital switch, Firmware, Multi OS, Multi language, Multi system, v.3.1.0.0, 1.3 (A03-00)] and restore the default settings. We do this directly through the Remote Console software.  Seeing the log in window, the user name is "Admin" and there is no password.  We can access in the switch, but "Admin" a/c is missing from the "User" settings category. So we can't change the Admin password.
   
  Could you help us to change any password Admin password?
   
  Thank you
   
  Tim.
  
  

• After Vista restore admin password

  I had to restore my HP G60 Vista laptop. After the restoration, an automatic admin account is configured with an autogenerated pw. The restore process does not say what is the pw. What pw is awarded after a restoration of vista?

  You must ask the HP support.
  It may be true that the password is empty, IE no entry, which is usually the case

• After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.

  After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.  Try to understand the problem.  Can I try to reinstall? Problem is on flashing screen cannot do anything.

  Original title: Windows 10

  Hello

  Thanks for posting in the Microsoft Community.

  (1) do the Windows 10 installation process is complete?

  (2) you are able to view the Windows 10 desktop?

  You can check the help below article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

  If the problem persists, you can reinstall Windows 10 by downloading an ISO image file to create installation media.

  To download an ISO image see the link below:

  https://www.Microsoft.com/en-us/software-download/Windows10

  To create an Installation media check out the link below.

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  It will be useful. Please get back to us with the State of the question.

  Thank you.

• User admin password not working not not after migration

  I've migrated shared Services and the application of our PROD of TEST environment planning using the 'hypadmin' user, who is a native user with administrative privileges in the two environments. After the migration, we can no more connection to the TEST environment with id (default) user "admin". You can still see the user id in Shared Services and it is put into service as an administrator. However, we are unable to identify with it.

  My understanding is that native passwords do NOT change during the import of LCM. Does anyone know why the "admin" password has scored zero or encountered this problem before? Version is 11.1.2

  Although we have another user "hypadmin" administration, we would like to access the default admin username. We tried to see if we can change the 'admin' password using 'hypadmin', but there is no option to do so when we right click "admin"-> properties.

  We do not have the Shared Services database backups, but if restore us, we will always have to migrate security HSS reuse LCM and so expect to encounter the same problem?

  Any guidance appreciated.

  Follow this post and see if you can re - set the password on the text box

  http://epmcult.blogspot.com/2014/06/resetting-Hyperion-workspace-admin.html

• Creative cloud not install after that I put my user password

  Creative cloud not install after I put my user/administrators password, nothing happens after. I have creative cloud before but I deleted it instead of uninstall. I tried everything and nothing works, I have urgent need! someone please help! -Thank you

  When you install or update, it's PROBABLY your operating system for you to prove that you have by asking your COMPUTER, not your Adobe https://forums.adobe.com/thread/2139902 password password

  Sign out of your account... Uninstall... to run vacuuming...

  -non-Cloud programs, to disable the service before uninstalling

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

  - and 5 steps in response to #1 https://forums.adobe.com/thread/2144928

• I have an older Mac that I just installed El Capitan on. When I try to run CS4, I get a license error. Error 150:30. I downloaded recovery license 11.6.1 and it fell in my terminal. It asks for my admin password, but allow me to type.

  I have an older Mac that I just installed El Capitan on. When I try to run CS4, I get a license error. Error 150:30. I downloaded recovery license 11.6.1 and it fell in my terminal. It asks for my admin password, but allow me to type.

  Error 150:30 fix https://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html license is the only link I have, but waiting for CS4 on El Capitan may sound unrealistic

• 27 installed everytime I start firefox it ask if I want to enable firefox change my hard drive and I have to enter the admin password never did this before u

  Firefox updated the browser. I'm a symbol of the admin in the corner of the icon (win7) whenever I run the application ff it ask if it is ok for firefox to make changes on the hard disk, enter admin password try to disable or correct thank you don369

  A possible cause of this error is that Firefox is configured to run as administrator.

  Make sure that Firefox is not set to run as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.