Similar Questions

• How can I change the login email address and access to the features of Windows 8?

  Original title: I accidentally entered a wrong email across to the top of the upgrade to windows 8 and now I can't access all the features of windows 8.

  When you install the upgrade for windows 8 he asked for my email address.  I misspelled my domain name, which causes it have instructions or messages will in the vast desert of never never land.  I need to check my email to make the apps work, but given that the email is valid I can't do that.  I need to know how to change the login email address in windows 8 so that I can go ahead and verify my account.

  Hi I also had this problem but I have used the local account and was able to access all applications with my correct email. I hope this helps!

• How to hide the MS account in the login screen of win8

  I won't show my MS account in the login screen of windows8,

  Can someone help how to hide MS account when connecting.

  I what to do. Thank you!!

  Name of xxxxx

  MS account (e.g. xxxxhotmail.comt)<--- hide="">

  I would like to know if there is a way to disable the display of the Microsoft Account e-mail address on the login screen while still requiring a password entry.

  Is this possible?

  Set up a Local account login rather than the connection of the Microsoft account.  You will then just your name?

  Charms / settings / change PC settings / user (left)

• I have a problem with the connection to the computer after you change the user name.

  Original title: HELP

  I changed the username on my laptop and it is not letting me log

  I changed the username on my laptop and it is not letting me log

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you have changed the user name.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Smartphones blackBerry how to change the user name of e-mail on a Blackberry Curve 9320.

  Dear community,

  I have a Blackberry Curve 9320. My company has recently changed their messaging system so I need to create a new e-mail account. Creating the account of electronic mail is not a problem. However. some settings need to be changed. When I go on settings, navigation key allows me to change the change the server info, type my password etc. However, I'm unable to change the user name. My device automatically generates a username of email that is not correct and I am unable to change because the navigation button jumps on this area. Can someone advise me on how a change the username of email on a curve 9320. Thank you.

  IT WORKED! Thank you very much. Force the unit to offer "I'll give you the parameters" was the thing. Have a great day.

• Cannot change the folder name of the user, i.e. the C:\Users\user name (folder name)

  I got a new computer w/Windows 7, but Set - up guy was working on 2 computers and put the wrong name in this machine slot 'username '.  All seeking answers to correct (my machine automatically books with my ADMIN correct name but doesn't let me change an incorrect name in the USER file), I came across this on VISTA.  It also applies to Windows 7?

  "What you see is the reference in the"C:\Users\user name"folder. While you can change the registered owner and the name of the user account, you cannot change the name of the folder 'C:\Users\user name'. The only way to do this is to create a new admin account and delete the one in a new. »

  If the solution IS identical to that of Vista, the instructions on the following link apply?
  http://www.Vistax64.com/tutorials/93026-user-account-delete.html

  Yes, the solution is identical to that of Vista, and apply the instructions at this link.

  Create a new account with the correct name and delete the old account.  If you wish, save the old account during erasing files and copy them into the new account.

• changing the computer name root

  I want to change the computer name added to the initial setup of the computer. I tried several suggested solutions and none worked.

  The easiest way to do what you want is to create another user with privileges to adminstrive account and name what you want.

  Then copy all your data and configure it as you wish.

  When you are satisfied, remove the original account.

  Edit: Didn't see page 2

• Change the login screen (cloudy) 24 theme to add the logo

  Request Express 4.1.1.00.23
  Internet Explorer - 8
  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  24 - cloudy - theme
  
  Hi I was wondering if anyone can help, I use the cloudy 24 theme for my application, I wanted to change the login screen and add the app logo. I downloaded one of the sample applications oracles called 'TREES', in which they have altered the login screen and put a logo on it. Ideally, that's what I would exactly like to my login page to look like but I don't know how to do my scren login look like the login screen 'TREES' and replcae the logo they use with my own.
  
  I have reviewed the themes and patterns of shared components but can't seem to find out how they did it.
  
  Concerning
  Ash

  Hi AshPatel2,

  I don't know how make my scren login look like the login screen 'TREES' and replace the logo they use to mine.

  (1) information to the apex.oracle.com sample container workspace request trees - samples
  workspace: ralab
  user name: test
  password: test
  application: 53647
  url: http://apex.oracle.com/pls/apex/f?p=53647

  (2) If you go on the model of the connection area in the body section you will find the following code

  
    
  
      
      
  
        
      
      
  #TITLE#
    
    
  
      #BODY#
      
        #CLOSE##PREVIOUS##NEXT##DELETE##EDIT##CHANGE##CREATE##CREATE2##EXPAND##COPY##HELP#
      
    
  
  

  (3) in particular, you need to replace this part with your logo div

  If you answer this question, please mark the thread as closed and give points where won...

  Best regards
  Mahmoud

• TB change the sender name to my name to email classic. Fritz! Box send a pushmail with the name "Fritz!" Box '. In the Inbox of my ISP of this name is present. ...

  TB change the sender name to my name to email classic.
  Fritz! Box send a pushmail with the name of the sender "Fritz!" Box' to my standard email address.
  In the Inbox of my ISP of this name is present. Get this mail with TB the name "Fritz!" Box"is changed in lastname, firstname. This is the full name of my standard email address as I stated in my address book.

  In the toolbar > Options > view > advanced and turn off "see the show only the names of the people in my address book."

• stop the warning to change the host name

  I continue to be careful:

  Your computer name is already in use on this network. the name has been changed...

  I click ok and keeps coming back with many more and will not stop!

  Thank you

  This is the share name that is duplicated on another device on the network, or the name of VICTORIES under the Ethernet settings. Both are in system preferences.

  Under network, click the network connection you are using (wired or wireless). Click the Advanced button, then the WINS tab change the NetBIOS name to something else. Click OK. If it is active, click on the button apply.

  If that doesn't help, click on the share icon. Change the computer name to something else. This is necessary, or even do anything if at least one of the options of sharing is checked.

• Cannot change the login screen to display all users.

  I'm unable to change the sign on screen to display all users.  It is said to remove the client service for netware (CSNW), when I go to remove only the open is available.  The service has not been started.

  Where did you go to remove the Client Services for Netware?

  Go to network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your network adapter (most likely, Local area connection), and then select Properties
  On the general tab, you should see a list under "this connection uses the following items."
  Select the Client Services for Netware, click to remove the check mark, and then click Uninstall.
  OK your way out.
  Restart (it is not automatically)
  After Windows starts, go to control panel > user accounts > Change the way users log on and outside
  Select the options you want and click on apply changes.

  The list of questions should normally (personal computers) include only 4 following:

  Client for Microsoft networks
  QoS Packet Scheduler (optional)
  Sharing files and printers for Microsoft Networks (only if you want to share files or printers)
  Internet (TCP/IP) Protocol

  If you do not see Client Services for Netware on the general tab of the connection to the Local network or if you still have the problem after uninstalling it this connection, examine the properties of other components in the network connections.  For some of them (e.g. Dial-up), the list of questions is on the network rather than on the general tab tab.

  If you can't find the Client Services for Netware for ALL network connections (and therefore cannot remove), reinstall it, and then follow the instructions above to uninstall.

  To reinstall:

  1. go in the network adapter Properties/General tab you use and then click on install
  2. make sure that 'Client' is highlighted, and then click Add.
  3. highlight "Client Service for Netware", click OK
  4. leave your PC restart.

• LaserJet M1536dnf: Impossible to change the host name on HP LJ M1536dnf

  Hi everyone;

  I'm changing the host name on our printer that is currently Imprimante1 that's not what I'm looking for (I have no idea how it was change or not at all).

  I tried to access the printer via IP in a browser (tried Chrome, IE and Edge) still occur. I see the host name to the title of the network, however, I am not able to change it.

  I also thought I might be able to install the software and use the Toolbox, except that during the installation, the Toolbox links are created in the start menu, but it is never installed (confirmed uninstall reinstall twice)

  So yes, here it is...

  Anyone have any ideas on the issue?

  See you soon,.

  Do not know your printer exactly, but on most of these when you go to the web page, you must go to networking and you will need to go in which change you the method of how it gets ip address or an ip.  On this screen will be the ability to set the IP in a manual address and the area that contains the host name you should be able to click on it and change the name.

• Properties of the system; General tab. How can I change the registered name?

  I am the second owner of my computer and I would like to change the registered name to show my own.  How can I do this?

  It's Windows XP Edition SP3 addition family

  Saturday, July 17, 2010, 11:24:04 + 0000, Dawgbrother wrote:

  I am the second owner of my computer and I would like to change the registered name to show my own.  How can I do this?

  It's Windows XP Edition SP3 addition family

  It is a Windows 7 forum, not a Windows XP forum. But since the same
  answer works for both versions of Windows, it's here:

  If I bought a used computer, no matter who previously owned, the first thing I have with it would be to reinstall the operating system itself. You don't know how the computer has been maintained,
  which has been improperly installed, what's missing, what virus and
  There may be spyware, etc. I would not live with someone of another errors and problems, possibility of kiddy p0rn, etc, and I would not recommend anyone else to do.
  But if you just want to change the name of "registered to", you can do
  editing HKLM\Software\Microsoft\Windows NT\Current
  Version\RegisteredOwner with Regedit.

  Ken Blake

• How to change the SSID name of the computer to be Compatible with the new name SSID router

  Need to change the default name of the SSID router and then reconfigure adapters wireless in each PC to be compatible with the new router SSID.  A PC has Windows XP Home Edition Version 2002 Service Pack 3 and the other Vista Home Premium.  What are the steps to change the SSID on each PC?  Your response will help complete a home network wireless system.  Thanks in advance.

  Hello

  Your computers use the SSID of your router - sound essentially its name.

  Check this box:
   
  Setting up a wireless router with Vista
  http://www.ehow.com/how-does_4899098_setting-up-wireless-router-Vista.html

  If necessary:

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  Setting up a wireless router with Vista
  http://www.ehow.com/how-does_4899098_setting-up-wireless-router-Vista.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Change the computer name in the network discovery, view old and new names and get error code 0 x 80070035

  I changed the computer names of computers each with windows 7 and a home network sharing. Network discovered each poster now the old and new names. I also have an error code 0 x 80070035.

  How can I get rid of the old names?

  Hello

  Are you able to access computers using the names?

  Step 1: Check out the link to learn how to delete the old name and create a new name:

  Change the name of your computer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-computer-name

  Step 2: Refer to the section below for more information to correct the error 0 x 80070035 and steps.

  Open the homegroup troubleshooting utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Error 0 x 80070035 appears if you are not able to access the network computer. Follow the instructions in the thread below if you are faced with a similar question:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-error-0x80070035-when-trying-to-share/d8168c72-D51C-41C3-8B8F-3b6bb7f65f43

  It will be useful.