LockTimeoutException tries to promote a lock when you use a sequence?

Similar Questions

• BlackBerry smartphone keyboard locks when you use the media player

  Hello

  I use the built-in Media Player to listen to the MP3, while I'm working.

  Because I am constantly moving away from my Office I must pause and start the music quite often.

  Sometimes the keyboard will lock everything playing, and I would like to avoid this. As I know the "BOLD" is not an option to automatically block the keyboard.

  Please can someone advise how can I stop this?

  Thank you

  Paul

  Hi guys,.

  Thank you both for your responses.

  I managed to find a solution to my problem, so I thought I would post, not only for the benefit of third parties, but because I thought it was funny when I realized what was causing the keyboard lock.

  When I have my BB out on my desk, I put on the case. I noticed the other day it was light as soon as I picked it up and goes dark as soon as I put it down.

  I checked for password, settings etc. of the screen and couldn't work on what was going on.

  Then I realized, because I rely on the case in the same way that he would lie if it was in the Holster, the magnets (I think there are magnets in the Holster?) were lining up at the BB and she believed that it was inside the case.

  Solution: I know put on the case, but turned around 90 degrees so its cross-cutting installation. Solved :-)

  Paul

• BlackBerry smartphone screen locks when you use Blackberry "BOLD"

  I administer a BES Blackberry Manager 4.1 running. We have a policy of lock screen that hangs on the screen after 30 minutes of inactivity. We have recently migrated to the Bold 9700 devices. Users are complaining that their device screen blocking and require a password even while they actively use it. I have experienced this personally as well.

  Is this a known phenomenon (one hopes) a documented fix or solution?

  Thank you

  Go to the COMPUTER policy and set long-term Timeout false under only peripheral elements

• Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine.

  Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine. It must be a sequence of keys... but I have no idea what it could be. Thank you and God bless you

  Hello
  When exactly the problem occur?
   
  Follow the steps below and check if that helps.
   
  Step 1:
   
  Test the issue in safe mode and check if the keyboard is blocked.
   
  Step 2:
   
  If your computer very well in Safe Mode functions, you can put your system to boot and check if any third party or any service application is causing the problem and therefore the computer to freeze.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you can go ahead and disable or uninstall the same.
   
  Once the system is in a clean boot state, check if the computer continues to block or not.
   
  See the link below for more details:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Lock on some of my icons, as well on my desktop and visible when you use Windows Explorer.

  I have these small yellow or gold (according to the colors of your screen) padlock superimposed on some of my icons on my desktop and visible when you use Windows Explorer and would would like to know how what they are, and how I can remove them.

  Hi Will,

  Thank you for keeping us posted.

  Glad to know that the problem has been resolved.

  I appreciate all your efforts really to try to solve this problem.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  We will be happy to help you.

  Thank you.

• What are the supported items when you use multiple suites?

  Hi all

  I created a plugin that sends the current path to a url,

  his work very well with debugging in Visual studio 2005 and then it is added to the Adobe Illustrator work only once.

  Its transmission, the path is that for a single file. While I was trying for the second time its does not work

  I use more costumes in my plugin

  AIDocumentSuite

  AIFilePathSuite

  AIActionManagerSuite

  AIUnicodeStringSuite

  AIURLSuite

  I use the "'AIURLSuite ' to call the url and calls the url several times while its used only and its only works once with multiple suites. "

  What are the supported items when you use multiple suites? It is necessary to release all the variables and the suites after completing the task?

  Should they come out in the same order in which they are acquired?

  Thanks in advance

  Farida kaid

  As far as I know, there is nothing forcing you to unleash in the same or in front of the order in which you have acquired in. Frankly, in our plugin gain us once, then lock the plugin to prevent it from unloading and don't release suites when we finished. That said, as far as I know, you should be fine to learn/work/output several times.

• How to disable direct sound when you use a plugin for guitar?

  I use the Waves GTR plugin for recording guitar in Logic Pro X, but because it puts a lot of pressure on the CPU, I tried he governs through a "bus" instead of having the plugin separately on every guitar track. The difference is that when I use the bus option, I can't seem to get rid of dry direct sound which is obviously very embarrassing. The only way for me to get rid of the direct sound is to use the RTM plugin on every guitar track that quickly causes the overload program when using several of these titles.

  Anyone know how to get rid of the direct sound when you use the alternative of bus for the guitar tracks?

  just at the exit of the guitar channel strip no output. This way you won't hear at the follow (because the dry track will not be transmitted to any output)

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• When you use facebook my words are really small, so I need to know how I can expand their return

  Somehow, I've changed the size of my characters only when you use facebook, so I would like to know how to change their return to regular size because they are really small. It's only like it when using facebook on firefox because I tried on internet explore and it is fine.

  CTRL - + is the best way (as in, hold down the ctrl key and press the key several times if necessary +). It could be [button mac] - + on Mac, I'm not sure.

• Not using laptop Satellite A665 3D 3D when you use WinDVD BD (3D version)

  Hello

  I bought the laptop A665 3d and loaded the Nvidia drivers for the 3D provided with the laptop package. The slide show after you run the wizard 3D grand worked full 3D and 3D of TOSHIBA VIDEO PLAYER worked as well (when you use one of these you see 3D glasses come to life) but I can get t a blue disc 3d ray to work using the player pre-installed.

  Installed WinDVD BD (v10), it says it supports 3D and in options, it has a 3D tab which configuring 3D top of page option is set to off but it is also grayed out so that you can t change.

  I have 4 movies in 3D on Blue ray and none work. They show the blurred image on the screen but the glasses don t seem to turn it on.
  I TRIED enabling 3D on the start menu.
  The upgrade of WinDVD BD
  Looking for help and not where it mentions 3D.

  Which version of the nVidia Driver is currently installed?

  Download the nVidia driver updated on the Toshiba site to the www.csd.toshiba.com

• When you use Roland FC300 footswitch to control the transport, all the USB keyboard midi notes do not reach the logic. No help available on this?

  When you use Roland FC300 footswitch to control transport LOGIC, all midi keyboard USB (UMA25s) notes do not reach the logic.

  They are visible using MIDI Monitor s/w so reach the OS X - but do not make SENSE.

  I tried the function of the environment of the logic and the double check OS X Midi Setup but no difference statistically.

  I would appreciate any help on how to proceed.

  Thank you

  Paddy

  I do not understand your post. Your use the FC300 to control logic - how is it connected?   Is it plugged into the keyboard via middle or did you connect to logic directly via a midi interface?  (sense are the keyboard and the FC300 connected independently.

  When you say midi notes reached illogical (those transmitted by the FC300 or those via the USB keyboard do you mean?).

  First thing to do is to circumvent the control surfaces to exclude...

  Then, the control screen the custom value and see if data midi reached logical... If his hitting the midi monitor 99.9% sure it is hitting logic.

• Satellite L300 - 29 X just crashes when you use some of the programs installed

  I bought a Toshiba L300 29 X for my daughter (30 years) help in its work of the University.
  Since we took this home and installed the OS it is questions. At first, I thought it was to do with Vista and so I bought the upgrade to Windows 7 and installed, but the same issues are there it just freezes when you use some of the programs installed.

  I tried restoring factory several times with Vista and still once I even made restoration to the first State to install W7 disk then updated from the web and then she still uses it for his United work and it freezes.

  There is nothing wrong with his work United as when using my laptop or even its partners a there aren't any issues or problems.
  Programs are in Office 2007 and it is the same copy I have in my laptop and they are both up-to-date.

  Its mobile partners is lower than its own specification and has less RAM so that to have only a single processor.
  I tried to install the W7 as a 32-bit and a 64 bit OS, and whenever there is any change in the problems with programs

  Can someone out there suggest a possible cause or same difficulty for am I at the end of my knowledge on this issue and my daughter is about to throw the thing out the window.

  Hello

  I think that the described issue could be related to a hardware problem, given that the laptop should not have problems running the Microsoft Office applications.

  In many cases, the s for laptop system could freeze due to a higher temperature.
  My girlfriend repeatedly asked for help because the laptop froze too.

  But the problem was linked to a higher temperature because cooling fans were clogged and cooling fans might not work correctly. She used the laptop sitting on the couch and there was not a lot of free space around the laptop to ensure good air circulation

  I want to say is that there are several reasons for such behavior annoying cell phone I think it would be wise to check the hardware first
  This should be done by the technician of the ASP.

• I updated my ipad ios 9.2.1 and when you use safari, it crashes

  I've updated 9.2.1 on my ipad and now my safari crashes when you use the keyboard

  Here's my own list of the fixes suggested trying who helped many former users of iPad.

  A warning:

  I make no warranty, express or implied, that any PART of my patches suggsted or solutions will fix/restore each older iPad on his former status of operation

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.
  If you use Safari, these features may be in the application settings under Safari.
  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  For additional questions to Safari, try disabling Safari Suggestions found in the settings app in the control panel settings of Safari. Press Safari and in the right panel, look for the Suggestions of Safari and turn this option off to disable this feature.

  If you are using Safari is always causing issues.
  Try changing / using web browser third another, different.
  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search

  Try to turn the reduced movement.
  This is found in the application of settings in the general tab, in the left panel.
  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  Try a hard reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

  Good luck!

• No bass when you use the docking station to not probe

  When I use the out port of my docking station (Series edited by moderator) I get no bass sound, just hail my wide range speaker. When the speakers are plugged into the headphone jack directly on the laptop it normal sound, with a full range of sounds. I checked the setting in the CP of its speakers are identified as the range, so this isn't the issue. There is no sound improvement enabled in Control Panel SRS. I'm puzzled. Why no bass when you use the docking station only. I tried two different docking stations with the same result: no bass.

  

  Yes! I finally solved it on my system:

  • Go to the control panel
  • Choose the material and audio

  or simply to display all Control Panel items

  • Select SRS Premium Sound Pro (it's an icon of circle blue/white)
  • Wait for the program to come black EQ
  • Select the tab/words "listening experience" near the top of the window of SRS Premium Sound PRO
  • Uncheck the 'improvement of Audio '.

  Fact

  In addition, there is the graphic equalizer in there that totally works well to further fine tune your desired speaker and the audio preference.

  

• When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  I work for a company that produces and transforms electric parts. We strive to get in remission at nine of the ECU, experiences, Instrument clusters etc. I'm trying to learn how to use LabVIEW to write commands and read the data on the CAN bus. I have downloaded the NI-CAN driver. I am currently 'play' with the same reception Port.VI show in the basic frame of the finder example API folder OR. I am not able to send the number in the data to write the table that it be read by the ncReadNet Mult .vi. When I put the parameter to 'Pending entries reading' the ncGetAttr.vi returns a 0 to indicate that there are no frames to read. As a result, the Mult.vi ncReadNet does not run.

  I don't have any connected equipment, I use the virtual CAN channel CAN256. Is this the reason why I can't get data frames in my queue for the Mult.vi ncReadNet to read?

  When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  CAN carry 256 and 257 are connected to eachother through software.  When you write about 256, you can read the data on 257 and vice versa.  I think the example you mention is a writing and reading on the same port, but what you want is to probably to make a copy of this VI, in order to run two at once, where it opens 256 and the other opens 257.  Then, when you write one that you will see on the other.  I think you might be able to use the test panel CAN too read an and use the example of the other.