LOG BUFFER

Hi experts,

My question is: = whence the changes in the log buffer? Does cache buffers UGA or database. If UGA then what part of the UGA. And copy that into the log buffer. This is the server process.

800978 wrote:
Hi experts,

My question is: = whence the changes in the log buffer? Does cache buffers UGA or database. If UGA then what part of the UGA. And copy that into the log buffer. This is the server process.

Well, you ask too many questions that can be answered in the documentation. Please note that the following messages which must mention your version of db (4 digits) regardless of how irrelevant you think that maybe.

For your question, this post of mine,.
http://blog.aristadba.com/?p=17

Read the article to Redo buffers and buffers Sales.

HTH
Aman...

Tags: Database

Similar Questions

  • Logging buffer - what size?

    Hello

    Can someone tell me how do you determine the size of the local logging on a Pix buffer, I was not able to find this point, any help would be really appreciated.

    Thank you

    Stu

    Hello

    Currently, the logging buffer size is set to 4K.

    Check the following:

    CSCdv91497

    Overall record buffer should be configurable

    http://www.Cisco.com/cgi-bin/support/Bugtool/onebug.pl?BugID=CSCdv91497&submit=search

    I hope it helps

    Franco Zamora

  • How do to the size of the log buffer reduce with huge Pages Linux

    Data sheet:

    Database: Oracle Standard Edition 11.2.0.4

    OS: Oracle Linux 6.5

    Processor: AMD Opteron

    Sockets: 2

    Carrots / power outlet: 16

    MEM: 252 GB

    Current SGA: GB 122 automatic shared memory (EAMA) management

    Special configuration: Linux huge Pages for 190 GB of memory with the page size of 2 MB.

    Special configuration II: The use of the LUKS encryption to all drives.

    Question:

    1. How can I reduce the size of the log buffer? Currently, it appears that 208 MB. I tried to use log_buffer, and it does not change a thing. I checked the granule size is 256 MB with the current size of the SGA.

    Reason to reduce:

    With the largest size of log buffer the file parallel write newspaper and the synchronization log file is averaged over 45 ms most of the time because she has dumped a lot of stuff at the same time.

    Post edited by: CsharpBsharp

    You have 32 processors and 252 GB of memory, so 168 private discussions, so 45 MB as the public threads size is not excessive.  My example came from a machine running Oracle 32-bit (as indicated by the size of 64 KB of threads private relative to the size of 128 KB of your son) private with (I think) 4 GB of RAM and 2 CPUs - so a much smaller scale.

    Your instance was almost inactive in the meantime so I'd probably look outside the Oracle - but verification of the OS Stats may be informative (is something outside the Oracle using a lot of CPU) and I would like to ask you a few questions about encrypted filesystems (LUKS).  It is always possible that there is an accounting error - I remember a version of Oracle who report sometimes in milliseconds while claiming to centisecondes - so I'll try to find a way to validate the log file parallel write time.

    Check the forum for any stats activity all over again (there are many in your version)

    Check the histogram to wait for additional log file writes event (and journal of file synchronization - the lack of EPA top 5 looks odd given the appearance of the LFPW and and the number of transactions and redo generated.)

    Check the log file to track writer for reports of slow writes

    Try to create a controlled test that might show whether or not write reported time is to trust (if you can safely repeat the same operation with extended follow-up enabled for the author of newspaper which would be a very good test of 30 minutes).

    My first impression (which would of course be carefully check) is that the numbers should not be approved.

    Concerning

    Jonathan Lewis

  • Redo Log Buffer 32.8 M, looks great?

    I just took on a database (mainly used for OLTP on 11 GR 1 matter) and I'm looking at the level of the log_buffer parameter on 34412032 (32.8 M). Not sure why it is so high.
    select 
        NAME, 
        VALUE
    from 
        SYS.V_$SYSSTAT
    where 
        NAME in ('redo buffer allocation retries', 'redo log space wait time');
    
    redo buffer allocation retries     185
    redo log space wait time          5180
    (database was for 7.5 days)

    Any advice on that? I normally keep trying to stay below 3 m and have not really seen it above 10 M.

    Sky13 wrote:
    I just took on a database (mainly used for OLTP on 11 GR 1 matter) and I'm looking at the level of the log_buffer parameter on 34412032 (32.8 M). Not sure why it is so high.

    11g, you should not set the log_buffer - only Oracle default set.

    The value is derived relative to the setting for the number of CPUS and the transaction parameter, which can be derived from sessions that can be derived processes. In addition, Oracle will allocate at least one granule (which can be 4, 8 MB, 16 MB, 64 MB, or 256 MB depending on the size of the SGA, then you are not likely to save memory by reducing the size of the log buffer.

    Here is a link to a discussion that shows you how to find out what is really behind this figure.
    Re: Archived redo log size more than online redo logs

    Concerning
    Jonathan Lewis
    http://jonathanlewis.WordPress.com
    Author: core Oracle

  • REDO LOG BUFFER DOUBT

    Hi EXPERTS,

    IM on 11 G R2, RHEL 5 my question that when the data changes in the database buffer cache how immediately it is copied in the redo log buffer. I mean what process the copy. I read it in the oracle documentation only when waiting for event [log file command (private stream flush incomplete)] LGWR waits DBWR again complete flushing of buffers IMU in the recovery log buffer. Completion of DBWR LGWR can then finish writing the log in process and then move the log files.
  • relationship between redo log buffer, journal of redo and undo tablespace files

    What is the relationship between the redo log buffer, redo log files and undo tablespace?

    what I understand is

    redo log buffer is the logical area where all the news of recovery were stored until they are transferred by LGWR bank roll forward log online... but y at - it report any with the undo tablespace with these two?

    Please correct me if I'm wrong

    Thanks in advance

    redo log buffer is the logical area where all the news of recovery were stored until they are transferred by LGWR bank roll forward log online... but y at - it report any with cancellations

    tablespace with these two?

    There is a link between files redo log and buffer, but the undo tablespace is something else entirely.

    spend it here with this links

    REDO LOG FILES
    http://www.DBA-Oracle.com/concepts/redo_log_files.htm

    BUFFER REDOLOG
    http://www.DBA-Oracle.com/concepts/redo_log_buffer_concepts.htm

    UNDO TABLESPACE
    Undo tablespace to cancel files to undo or roll back uncommitted changes pray the database.

    Hope you understood.

  • Question about the size of the redo log buffer

    Hello

    I am a student in Oracle and the book I use says that having a bigger than the buffer log by default, the size is a bad idea.

    It sets out the reasons for this are:

    >
    The problem is that when a statement COMMIT is issued, part of the batch validation means to write the contents of the buffer log for redo log to disk files. This entry occurs in real time, and if it is in progress, the session that issued the VALIDATION will be suspended.
    >

    I understand that if the redo log buffer is too large, memory is lost and in some cases could result in disk i/o.

    What I'm not clear on is, the book makes it sound as if a log buffer would cause additional or IO work. I would have thought that the amount of work or IO would be substantially the same (if not identical) because writing the buffer log for redo log files is based on the postings show and not the size of the buffer itself (or its satiety).

    Description of the book is misleading, or did I miss something important to have a larger than necessary log buffer?

    Thank you for your help,

    John.

    Published by: 440bx - 11 GR 2 on August 1st, 2010 09:05 - edited for formatting of the citation

    A commit evacuates everything that in the buffer redolog for redo log files.
    A redo log buffer contains the modified data.
    But this is not just commit who empty the redolog buffer to restore the log files.
    LGWR active every time that:
    (1) a validation occurs
    (2) when the redo log is 1/3 full
    (3) every 3 seconds
    It is not always necessary that this redolog file will contain validated data.
    If there is no commit after 3 seconds, redologfile would be bound to contain uncommitted data.

    Best,
    Wissem

  • The log buffer size

    Hello
    Could someone please confirm that the following query returns log buffer size is correct?
    select 
       a.ksppinm name, 
       b.ksppstvl value, 
       a.ksppdesc description
    from
       x$ksppi a, 
       x$ksppcv b
    where 
       a.indx = b.indx
    and 
       a.ksppinm = '_ksmg_granule_size';
    The reason I ask is this log_buffer parameter in v$ parameter in my database has a value of 7024640, while the query return 4194304.

    Thank you.

    Hello..

    The '_ksmg_granule_size' "shows the size of granule not size log_buffer. If the total size of the SGA is equal to or less than 1 GB, then granule size is 4 MB. For greater than 1 GB EAG, granule size is 16 MB.

    What is the size of the SGA of your database.

    For my database SGA > 1 GB the output of the query is 16 MB
    {code}
    21:41:47 TEST > value col to a25
    21:41:56 TEST > col DESCRIPTION for a30
    21:42:05 TEST >
    21:42:05 TEST >
    21:42:05 TEST >
    21:42:05 TEST > select
    21:42:08 2 a.ksppinm name,
    21:42:12 3 b.ksppstvl value,
    21:42:12 4 a.ksppdesc description
    21:42:12 5 of
    21:42:12 6 x$ ksppi has.
    21:42:12 x $7 ksppcv b
    21:42:12 8 where
    21:42:12 a.indx 9 = b.indx
    21:42:12 10 and
    21:42:12 11 a.ksppinm = '_ksmg_granule_size ';

    NAME VALUE DESCRIPTION
    -------------------- ------------------------- ------------------------------
    granule _ksmg_granule_size 16777216 bytes in size
    {code}

    HTH
    Anand

  • Redo Log Buffer - Online redo - archived journal - LGWR

    Hello

    It is specified in this document that redo entries is set to all changes (LMD), the database Redo Log Buffer (my question is when does? after validation?).

    And, in this connection, they say engaged and committed changes in the section again. But when you scroll down to the section Commit on the same link, after a commit log writer process (LGWR) will write journal entries of the SGA (log buffer) forward in the line redo log file.

    I wonder how? When I tested it on my database table that holds the record of > 300 000, recovery, and subsequently logs archive logs is generated (I did not commit the DML yet).

    Now my question is, how far is the whole of the archivelogs will be useful at the time of recovery, if I restore the changes? If Oracle doesn't know these archivelogs, why it should generate?

    And what section in the second link is correct?

    Help, please.

    Thank you
    Aswin.

    Aswin,

    Undo segments are ordinary data segments. Data segments are protected by roll forward. Temporary segments are not protected restore in progress.
    If in the case of an accident, when Oracle must retrieve a rollback segment, it will use again to recover this segment.
    In crash recovery, the first thing that will happen is rollback (Undo uncommitted changes), followed by rollforward ("readback" of committed changes).

    HTH

    -----------------
    Sybrand Bakker
    Senior Oracle DBA

  • Can make the size of the log buffer be changed or is managed internally by oracle

    Can again change the log buffer size? or is managed internally by oracle in the SGA? We are on oracle 10.2.0.3.

    The reason why I asked the question was that our construction team do estimates for data/memory sizing properly... so we wanted to know if it can be changed or not?

    Hi S2k!

    The SGA Memorystructure is handled automatically by Oracle, if the SGA_TARGET initializationparameter is set. But nothing less you are able to configure the size of a memorystructure by yourself. Here is a good article on the optimization of the log buffer.

    [http://www.dba-oracle.com/t_log_buffer_optimal_size.htm]

    I hope this will help you along.

    Yours sincerely

    Florian W.

  • Redo log buffer question

    Hi master,

    This seems to be very basic, but I would like to know internal process.

    We know all that LGWR writes redo entries to redo logs on the disk online. on validation SCN is generated and the tag to the transaction. and LGWR writes this to online redo log files.

    but my question is, how these redo entries just redo log buffer? Look at all the necessary data are read from the cache of the server process buffers. It is modified it and committed. DBWR wrote this in files of data, but at what time, what process writes this committed transaction (I think again entry) in the log buffers cache?

    LGWR do that? What exactly happens internally?

    If you can please focus you some light on internals, I will be grateful...


    Thanks and greetings
    VD

    Vikrant,
    I will write less coz used pda. In general, this happens
    1. a calculation because how much space is required in the log buffer.
    2 server process acquires redo copy latch to mention some reco will be responsible.

    Redo allocation latch is used to allocate space.

    Redo allocation latch is provided after the space is released.

    Redo copy latch is used copy redo contained in the log buffer.

    Redo copy lock is released

    HTH
    Aman

  • Now PATCHED: Player QuickTime Streaming Debug Error Logging buffer overflow

    The following was copied/pasted from http://secunia.com/advisories/40729/

    Description
    Krystian Kloskowski has found out a [critical] vulnerability in QuickTime Player, which can be exploited by malicious people to compromise a user's system.

    The vulnerability is due to an error of border in QuickTimeStreaming.qtx during the construction of a string to write to a debug log file. This can be exploited to cause a stack-based buffer overflow for example tricking a user in the display of a malicious web page that references a file SMIL containing a URL that is too long.

    A successful exploitation allows execution of arbitrary code.

    The vulnerability is confirmed in version 7.6.6 (1671) for Windows. Other versions may also be affected.

    [NO] Solution
    A hotfix or an update is not currently available.

    EDIT: Due to this vulnerability in QuickTime, Secunia reports now all my browswers (IE, FF, Opera) as being insecure.

    QuickTime 7.6. 7 was released http://www.apple.com/quicktime/download/ ;

    and Secunia PSI removed this vulnerability to his list of (In) Secure Browsing.

  • What should I Actions she undertakes to buffer log regarding

    Hello Experts,

    When a user commit its transaction, the complete log buffer (which can contain uncommitted transactions, other users) will also push to log online?

    Or just in the entrance of himself?

    Thank you and best regards,

    Tong Ning

    Hello

    Yes.All journal the log buffer flused online. Also look at the following link

    https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:621023586146

    Yasin.

  • Help with logs on Cisco router

    First of all: if I'm in the wrong place, please let me know.

    Question: I'm digging orders Cisco, but the help of Cisco, Googe, Yahoo Sites and other types of resources can not give me the answer I wanted.

    Router: Cisco 7206VXR (NPE - G1) processor (revision C) with 983040K / 65536K bytes of memory.

    My question is simple and pleasant: I need to learn from the history of the Interface of one of our routers and not being is not in the domain of Cisco for a few years I can't find command. If I can find a command that draws a complete history that would be great.

    The commands I used:

    history

    history of show

    car1. Ash #sh interfaces se1/0/23:0 history
    ^
    Invalid entry % detected at ' ^' marker.

    car1. Ash #show interface se1/0/23:0 60 minutes story
    ^
    Invalid entry % detected at ' ^' marker.

    I need to find the command that gives newspapers the following type:

    00:00:46: % LINK-3-UPDOWN: Interface Port-Channel, 1 changed State to
    00:00:47: % LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed State to
    00:00:47: % LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed State to
    00:00:48: % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, state change downstairs
    00:00:48: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed
    State down 2 * 1 Mar 18:46:11: % SYS-5-CONFIG_I: configured from console by vty2
    (10.34.195.36)
    18:47:02: % SYS-5-CONFIG_I: configured from console vty2 (10.34.195.36)
    * 18:48:50.483 Mar 1 UTC: % SYS-5-CONFIG_I: configured from console vty2 (10.34.195.36)

    What you are looking for is not available using interface show orders but would be available using the show log command. You want something that could look like this

    view Journal | include 1/0/23:0

    Note that this is the search through the buffer of logging on the router. The amount of memory allocated to the record buffer and the volume of messages generated will determine how far back you can go. If the router sends syslog messages to a syslog server (or another feature of management that archive messages) then you can search the logs it and to go further back. Also note that the logging buffer is cleared when the router reloads.

    HTH

    Rick

  • PIX 501 Logging

    I would like to open a session of hacking and intrusion of the attacks through a PIX 501 with a connection to broadband in a Home Office Setup. I have the camera upwards and the race and I am currently Setup with the Kiwi Syslog Dameon. What would be my best approach Logging all relevant information with the load to the bottom of the unit? Any suggestions / tips would be appreciated.

    Thank you

    It is a common logging configuration that I use:

    opening of session

    timestamp of the record

    logging trap information

    host of logging inside x.x.x.x

    No registration message 106015

    No message logging 106007

    No message logging 105003

    No registration message 105004

    No message recording 309002

    No message logging 305012

    No registration message 305011

    No message logging 303002

    No message logging 111008

    No message logging 302015

    No message recording 302014

    No message logging 302013

    No registration message 304001

    No message logging 111005

    No message logging 609002

    No message recording 609001

    No message logging 302016

    I usually do not enable the logging buffer (never use connection console it will affect performance) because it's not the messages timestamp (it only timestamps in the syslog). But the PIX loaded down with the load, you and Kiwi you before the PIX don't.

    Also turn on the IDs on the PIX.

    It will be useful.

    Steve

Maybe you are looking for