Logic pro exporting is not midi

Similar Questions

• Logic pro 9 will not launch on El Capitan 10.11.2

  Hello

  I just installed Logic Pro 9 on my system El Captan.

  When I try to start it, a message I should update my logic pro to the latest version and it does not start?

  Is this normal or is there any problem with the system here? I really have to buy the new version bin my Pro 9 and Logic pro?

  If so, all my previous music files will be compatible with the new version of pro Logic?

  Can someone give me good advice.

  Thanks in advance

  Roland

  If you have installed the DVD version, just go in the pre - app store Apple Menu/Software Update and logic 9.1.8 should wait for you.

• I don't hear Roland 501 Piano during playback when recorded in Logic Pro.

  When I record my 501 Piano from Roland in Logic Pro, I do not have the piano through my speakers to read.

  Create an external midi track

  in the way - (port) Inspector to ensure that Roland is selected and all midi channel.

  When you reproduce the track it is routed to the 501.

  If you don't hear it - make sure that Roland is configured to accept midi in reading

• Logic pro 9 crashing

  Logic Pro 9.1.8 (1700.67) - OS X El Capitan 10.11.2

  Mac Pro mid-2012

  1. 3.2 GHz Quad-Core Intel Xeon

  14 GB 1066 MHz DDR3 ECC

  ATI Radeon HD 5770 1024 MB

  -------------------------------------------------------------

  So logical crashes constantly in two different circumstances...

  1: at some point in the project, I'll spend my screenset (with 1, 2 or 3 as the quick access keys) to get a different view to my project. When the screens are trying to change the two go black and about 3 seconds later I get a crash. After these accidents the project will be recorded as "hip-hop (crushed)." If some of my pieces have 10 + (crashed) behind the title.

  2: the other instance where I get a crash is when I'm doing my due diligence and randomly the CMD + s for a backup. Recording can run 5 to 25 times, but at some point it will say "the project «...» ' cannot be saved. "But right after that I'll save it and it will save perfectly. Only to then crash out of nowhere part 20-30 seconds later.

  I'm tired of dealing with this and I removed a lot of defective au. Run the diagnostic tests, etc.

  Report of crash on crash specific thread below:

  Request for clarification:

  Abort() called

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 libsystem_kernel.dylib 0x9901c58a __pthread_kill + 10

  1 libsystem_pthread.dylib 0x990a8448 pthread_kill + 101

  2 libsystem_c.dylib 0x92c61d00 __abort + 187

  3 libsystem_c.dylib 0x92c61c45 demolition + 173

  4 com.apple.logic.pro 0x003e6729 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 3842985

  5 libsystem_platform.dylib 0x9d73b01b _sigtramp + 43

  6   ???                           0 + 4294967295 0xFFFFFFFF

  7 com.apple.logic.pro 0x003e6770 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 3843056

  8 com.apple.AppKit 0x947dc367-[NSWindow initWithContentRect:styleMask:backing: postpone: screen:] + 107

  9 com.apple.logic.pro 0x007c5709 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 7902089

  10 com.apple.logic.pro 0x007c7796 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 7910422

  11 com.apple.logic.pro 0x007c789e std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 7910686

  12 com.apple.logic.pro 0x0073faaa std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 7354154

  13 com.apple.logic.pro 0 x 00741504 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 7360900

  14 com.apple.logic.pro 0x00741fdb std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 7363675

  15 com.apple.logic.pro 0x003e4be6 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 3836006

  16 com.apple.logic.pro 0x001cd0c7 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 1641799

  17 com.apple.logic.pro 0 x 00616967 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 6137319

  18 com.apple.logic.pro 0 x 00613735 std::ostream & TraceOutContainer(std::ostream &, CEvs, const char *, int) + 6124469

  19 com.apple.Foundation 0x988babcb __NSFireTimer + 117

  20 com.apple.CoreFoundation 0x95ef2826 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 22

  21 com.apple.CoreFoundation 0x95ef22d2 __CFRunLoopDoTimer + 1250

  22 com.apple.CoreFoundation 0x95f79d6d __CFRunLoopDoTimers + 349

  23 com.apple.CoreFoundation 0x95eaa2a1 __CFRunLoopRun + 2113

  24 com.apple.CoreFoundation 0x95ea97f6 CFRunLoopRunSpecific + 390

  25 com.apple.CoreFoundation 0x95ea965b CFRunLoopRunInMode + 123

  26 com.apple.HIToolbox 0x95a5c2f1 RunCurrentEventLoopInMode + 267

  27 com.apple.HIToolbox 0x95a5c0f3 ReceiveNextEventCommon + 503

  28 com.apple.HIToolbox 0x95a5beec _BlockUntilNextEventMatchingListInModeWithFilter + 99

  29 com.apple.AppKit 94630512 _DPSNextEvent + 1053 x 0

  30 com.apple.AppKit 0x94a3b0b0-[NSApplication _nextEventMatchingEventMask:untilDate:inMode: dequeue:] + 1057

  31 com.apple.AppKit 0x9462ff8b-[NSApplication nextEventMatchingMask:untilDate:inMode: dequeue:] + 121

  32 com.apple.AppKit 0x9462512f-[NSApplication run] + 1063

  33 com.apple.prokit 0x013d6b80 NSProApplicationMain + 415

  34 com.apple.logic.pro 0x0002bad5 DummyConnection::DummyConnection() + 193

  Here's the thing...

  Logic Pro 9 is not supported under El Capitan... Its considered to be an application of EOL (End Of Life) these days... so don't expect any patches or updates.

  Your choice is...

  (1) roll to a combination of OS X and previous LP9 that worked... using your backups...

  (2) updated Logic Pro x...

  That's all...

  Note: Partial copies of incident reports do not help possible all troubleshooting... like to much info is missing.

• All versions of Logic Pro need an Ilok?

  I want music that does not require an Ilok software.   Are there?

  I looked at Logic Pro on Apple.com and could not find any info on if an Ilok is required for this software.

  Thank you

  Logic Pro X does not have an iLock. So there you go.

• Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)

  Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)?  I contemplate moving to Sierra, but not if it comes into conflict with Logic Pro.  Can someone advise?

  Thank you!

  Matt

  It was reported a number of not being able to save or to new projects with the title of the Sierra.

  I would conclude some time if I were you, especially if everything is working well at the moment.

• Logic Pro: MIDI channels

  Hello

  I just bought the M - Audio Code49 and I would like to split the keyboard although tempered into 4 areas.

  I so do not apply on the well-tempered clavier, in area 1 note C1 - B1 channel en 1, canal zone en notes C2 B2 2, etc..

  I then selected the 4 buttons of zones on the well-tempered clavier, in a way that 1 2 3 4 buttons are turned on.

  The settings are so well-tempered clavier do on the pay be split areas en 4.

  Bathroom, on my MacBook Pro (retina, OS X El Capitan), in Logic Pro 10.2.4, I created 4 tracks of instruments.

  I've assigned each (in Inspector > track > MIDI channel) UN number correspond to the MIDI channels 1, 2, 3, 4.

  MIDI channel 1 pour the first instrument, instrument to MIDI channel 2 for the second, etc.

  I thought so have a different instrument by octave on my keyboard, but the Microsoft is not case...

  That do I do? I forgot what manipulation?

  Thank you!

  try turning automatic Demix on I have preferences and down - you that all tracks are enabled for recording.

• Piano MIDI pedals on logic pro problems

  the pedals of my piano yamaha arius, the right and the middle ones, produce a sound when connected to logic pro X. I can't pass that off, and it drives me crazy because I can not play with pedals, which sounds terrible depends on music. The right pedal produce a E and the middle one a d. and it its really strong. I need a way to configure them to work as they are supposed to! Thank you

  Post edited by: totentanzfool

  This looks like to me MIDI controller messages being modified in MIDI Note messages. (These message numbers of control pedal, 64-127 and 66-127, correspond to these notes, and the value down to a pedal is 127, which, for a note, would be the largest value for sound intensity). Unfortunately, this can have several causes. A simple thing to try is:

  

  But don't think it will work in your case, as I suspect that the messages are sent by your Yamaha like this, so you will have to consult its manual and maybe its forums to find out what parameters to change. I guess that the Yamaha has a direct USB connection and not a separate MIDI interface?

  In any case, to check that the messages are sent by your Yamaha, download this free app:
  https://www.Snoize.com/MIDIMonitor/

  Here is an example when I type my pedal support:

  

• M - Audio Keystation 49th, not its entry into Logic Pro 10.2.1

  Don't know what I do wrong here. I've lived all my Logic Pro X settings and I don't understand why there is no sound coming out of my M - Audio Keystation 49th in Logic Pro 10.2.1.

  Can someone tell me what setting could be the cause of the issue?

  

  (1) the keystation makes no noise... there just send data Midi...

  (2) download the free lunch monitor...

  https://www.Snoize.com/MIDIMonitor/

  Install and then press the keys on your 49th and see if it's midi notes transmittiing to your Mac...

  If it is not then the 49th doesn't correctly... and has nothing to do with logic... See the manual that came with the 59 E for assistance or call M-Audio for help...

  If it is... so that the midi data will be received by the logic so it must be how you have set things upwards in the logic itself... (As you have not selected the right inputs and outputs audio to hear sound from a software Instrument...)

• How xml import and export aaf in logic pro 10.2.1

  Hi all!!

  I am trying to export the abnormal analysis result of my final cut pro x file.

  so I export xml x, and I tried to import it in logic pro x. (this is what I learn from youtube tutorial)

  then I couldn't find the "import to XML' and 'export aaf' in logic pro x.

  I don't know if it's the problem of the new version or not... (I'm totally new to logic pro..)

  can someone nice enough to answer my question please?

  Thank you very very much

  Lucy

  

  Go to logic preferences and turn on ALL the advanced tools... (you are not more logical running in the 'Garageband Pro' limited functionality mode)

  

  Missing menu items will appear now...

  

  and...

  

• Logic pro can not open fully

  anyone else facing this problem? I have my file saved on logic pro however it's completely open. I click on it, but when he opens the main menu where all the work is done on do not open. any suggestions?

  Can you post a screenshot?

  What happens with all the projects or a project (may got corrupted)

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Export files as AIFF in Logic Pro

  I use Logic Pro 10.2.2 on an iMac with OS X 10.11.4. I am a dj - I mixtures that are 2 to 4 hours - long I have mastered in logic - I want to export as AIFF - I get the "the bounce file exceeds the maximum size of the file (AIFF 2 GB;)» WAV 4 GB). S ' Please change the format of the College, or decrease the scope of rebound. »

  Is there a way to get around this? Is there really a max 2 GB to AIFF? I want the best quality - uncompressed files. I got dat and want a good archive. Any suggestions? Thank you!

  Hello

  dwhitcraft wrote:

  Is there a way to get around this?

  Yes: Use the College or WAVE format

  dwhitcraft wrote:

  Is there really a max 2 GB to AIFF?

  Yes, 2 GB to AIFF. B: standard files are limited to 4 GB, but LPX then supports the RF64 WAVE format that allows for files > 4 GB (see https://en.wikipedia.org/wiki/RF64)

  You could bounce back to a .wav file or a CAF.

  dwhitcraft wrote:

  I want the best quality - uncompressed files.

  There is no difference: none use data compression.

  TDC

• Please, I m using a Logic Pro 9 and the key "Advanced"(tools) does not seem to me in the 'preferences'. ". Why? Help!

  If please, I m using a Logic Pro 9 and are looking for the key "Advanced" (tools) but doesn't seem to do not for me in the 'preferences'. ". Why? Help!

  Because there is no mode "Advanced Tool' to Logic 9.

  Logic 9 is always and only has an advanced mode, there is no other method.

  Advanced tools (and their duty to be checked) was a ridiculous logic X when it was released.

• Logic Pro does not work with Yosemite?

  I bought Logic Pro 9 earlier and have since upgraded to Yosemite and now will not work Logic 9 - How can I change that it is compatible with Yosemite?

  Thank you

  Latest OS X & Logic Pro compatibility information

• Logic pro 9 serial number not recognized on the new mac. How can I solve this problem?

  Hello, I have a version of Logic Pro 9 I am trying to install on my new mac with El Capitan,

  When I enter the serial number on the back of my copy it invalid sys.

  How can this be?

  Thank you!

  Was it a (boxed DVD) version upgrade?