login script for permission of a folder to a standard user.

Hi guys,.

I am trying to install an application that will keep the files in the folder %AppData%, but I don't have write permission to the site said. I think if possible to have a logon script that has admin credentials in the script of the said who will give me a read and write for the %AppData%\microsoft\windows\sendto folder permission every time I connect using the standard user? and how to do it?

Thanks in advance,

The %AppData%\microsoft\windows\sendto file is specific to the user, and users should have full access rights. Instead of trying to do things to the logon script, you must set the structure of the folder appdata % approval.

Tags: Windows

Similar Questions

How do I access the folder allowed with standard user?

I have 2 accounts, one is standard, the other is the admin account.

My PC has a permitted record that only allow admin to access.

I always connect with the standard user and sometimes need to access these files from parmitted, but no authorization for the standard.

So, every time I change the user access. It's too boring.

I tried the command runas, but does not...

Please give me some advice that can access the folder allowed with the standard user, if possible.

Thank you

I have 2 accounts, one is standard, the other is the admin account.

My PC has a permitted file that allow only to admin for access to.

Please give me some advice that can access the folder allowed with the standard user, if possible.

You must change the permissions of this folder so that everyone has full access.

Customization of the application for permission to use a key dialog box

Hi guys,.

When the dialog box request for permission to use a key appears (whene users must work with the private key protected by a password), the option selected by default is to refuse permission. Is it possible to customize the befavior of this dialog in a way the grant permission will be the default option selected?

Thank you.

Petr

It does not exist, the default value is 'no' to prevent accidental security breach.

How to run a script for all the images in a folder?

How to run a script for all the images in a folder?

You can assign your script to an action, then use processor by batch or image with the option apply to all subfolders.

Mode script for ANY c ++ function

Hi all

My goal was to use the pxi 5406 to implement features of frequency sweep. Right now, we use only the functions on the list of the frequencies of creation. There are four modes of release for the frequency list, signle, continuous, step by step and burst. We use the bleachers through fashion. It is painful to use this mode, since for each frequency, you need to send a rising edge, so if I have several hundred, it means I have to produce this amount of rising edges. This will generate a lot of buffer in another analog card.

My question is, could I use script for the frequency list view? Or is there a smart way to achieve this? From the file of signal aid, he said that there are some c programe on script mode. But I can't find any examples in my computer. If you have any other, could you send me?

Thank you very much.
.

Yami.

Yami,

The 5406 has the ability to run script mode. Only for her output modes are Standard function and frequency list. However, I believe that you can do what you want to do with the list mode frequencies. Assuming that you do not want to trigger you can put the camera in single or continuous Mode. Single will play your select frequency scan and then once completed, build:

Continuous is similar, but you continue to repeat the signals to stop:

All the above details are in aid of signal generators of NOR. I looked under the heading devices > 5406 > trigger > triggering Modes.

With simple or continuous, you can specify the length of the waveform step, which could be a good starting point. With regard to the examples for c ++, I do not have, but if you look in the Start Menu, NOR-FGEN, National Instruments, examples, OR-FGEN C examples you can find a folder for "Sweep generator", there is a model and an example C you can look over your program after. I hope this helps!

There was an error saving the files - "you may not to save in this location the administrator contact for permission.

Original title: admin account is not acting as an admin account
I am the admin of my laptop and when I need to edit some files today in record programs it wouldn't let me. He said: "you are not allowed to save in this location contact the administrator for permission" but I am the admin, then when I check the permissions for me everything is checked. Yet it still doesn't let me add files or record anything

also, each folder in C: local drive when I click Properties read only is selected and when I uncheck and press on apply he says he he applied but when I check again it is still selected. yesterday everything was fine and I was able to install, move, or change the files that I wanted to

is it possible to fix this?

Hi Merrick Davis,

1. When you try to save files?
2. are you unable to make changes to only the files in the C drive or the discs?

Try these steps and see if it solves the problem:

Step 1: Create a new user account and see if you can save files using this account.

Refer to this link for help:
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

Step 3: Perform a system restore to restore the computer to an earlier point in time before the problem started.

See these articles for help:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft Answers Feedback Forum and tell us what you think.

Do not have the permission to a folder, but I am the admin. (win7)

Hey, I get these errors when you try to copy into the folder D:\Program Files 2 and if I try to delete anything from him, he said 'you must be authorized to perform this action. " Even though I am the administrator of the computer it still doesn't let me copy/delete the files it contains.

I tried to use the Take Ownership reg. authorization, but when I try to take ownership on this folder, in the CMD window, it says "SUCCESS: the file or the folder D:\Program Files 2 is now owned by RAYHAN-PC ' but underneath it just says:" INFO: access denied. "< d:\program="" files="">

and I still can't edit the program files 2.

One thing I noticed, is that subfolders inside Program Files 2 gives the full control permission to the admin, but not the user. And if I try to click on the Security tab in the folder properties window, he says "the permissions on are misclassified, which can cause some ineffective entries" and I can't change the permission settings. It says I need to reorganize the permissions, but if I try to reorganize and give full control to USERS, he said only: "access denied".

I tried Googling for answers, but nothing helped.

Could this be a virus?

Can someone help me with this? Thank you in advance if

Hi Ray,

Screenshots as soon as you have provided and since the last post you made, it seems to me that AVG is installed in the D drive on the computer and it runs in the computer. As I mentioned in one of my previous posts, if you have any program installed in this folder in the D drive in the computer, you will not be able to remove the contents of the folder.

At this point, I would ask you to uninstall AVG (and any other program installed in this folder in drive D) and check if that helps. In order to completely uninstall AVG, you must download and run the utility of deletion there, provided by AVG at this link.

Let is know if this helps or not.

Login script JSON jqm to need help bbui

Hello

A few months ago, I tried to start with bbui get more native objects (like swipe in the menu drop-down).

The problem is that bbui sucks compared to jqm (kitchensink) my complete app depends on, and the part I am now is connection and registration of a new user of the application.

This is example code that I use a lot:

Example of form

[code]

[/ code]

Example of jQuery:

[code]

$(function() {})
$("#JqAjaxForm").submit (function (e) {}

var b is return ["JqAjaxForm"] ["email"] .value;.
var c is return ["JqAjaxForm"] ["password"] .value;.

dataString = $("#JqAjaxForm").serialize ();

$.ajax({)
type: 'POST',
URL: ""http://myserver.com/login.php ", "
data : dataString,.
data type: 'json ',.
success: function (data)
{

If (data.usrkey == "undefined") {alert ("user/password incorrect");
} Else if (data.usrkey == "null") {alert ("user/password incorrect");
} Else if (data.usrkey == '0') {alert ("user/password incorrect");
} Else if (data.banned == '1') {alert ("user/password incorrect");
}
on the other
{

USRID = data.usrid;

usrid var = data.usrid;

localStorage.setItem ('userd', usrid);

Window.Location.assign ("Start.html");

}

}

});

});
});

[/ code]

what the code, if the json in login.php data is 0 or undefined, it means that your user/pass is incorrect.

When usr.banned is 1, it means you did something wrong and you're banned from the app

Otherwise, it will return your username and which will always be greater than 0 then you will get a localstorage (aka connected).

This code does exactly what is should do... in jquery.

I tried to mix different versions of jquery and jquery mobile with bbui but it has messed up every little thing.

And this json/ajax request made in this case only connect, but I use it a lot more.

As example for user information, submit information, check if you have access to the parties (0/1).

In any case to long a little more short, jquery does not set well with bbui.

I am locked out of my application and cannot save a new user because it uses jquery to submit.

Someone at - it a good example of the above code that does exactly the same thing?

but works in bbui, OR a jquery lib (mobile) I can use with bbui

Small update on my side, when I use the zepto (http://zeptojs.com/) plugin, I get the below error:

ReferenceError: Can't find variable: webworks

This error I get also when I include any javascript jquery or jqm file

I forgot to mention, indeed, that I already have those around him.

my login script works now, jquery 1.9 x was the problem, no problems with 1.8.x

802. 1 x with the login script

Hello

Before you set the 802. 1 x with ISE. Logon user with a script to map the network drive.

We deployed the 802. 1 x with ip phone and your PC successfully, but the logon script does not work now.

Whatever measures are necessary to make the login script work?

ISE:2.1

switch: 3750 with 12.2 (55) SE10

PC:Win7 (to connect to the ip phone)

IP phone: 6921 (connect to switch f 1/0/4)

Switch configuration is to see more:

!
version 12.2
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime show-timezone msec
Log service timestamps datetime localtime show-timezone msec
no password encryption service
Service linenumber
sequence numbers service
!
hostname ISESW01
!
boot-start-marker
boot-end-marker
!
enable password 7 xxxxxxxxxxxxxxxxxxxxxx
!
username password 7 xxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx
!
!
AAA new-model
!
!
RADIUS AAA server group ISE
auth-port 1645 10.202.152.91 Server acct-port 1646
auth-port 1645 10.202.152.92 Server acct-port 1646
!
default AAA dot1x ISE authentication group
AAA authorization network default group ISE
AAA authorization auth-proxy default group ISE
accounting AAA periodic update 5
accounting dot1x default start-stop group AAA ISE
AAA accounting system by default start-stop group ISE
!
!
AAA server RADIUS Dynamics-author
customer 10.202.152.91
customer 10.202.152.92
!
AAA - the id of the joint session
switch 1 supply ws-c3750v2-48ps
mtu 1500 routing system
VTP transparent mode
DHCP excluded-address IP 10.202.21.1 10.202.21.10
DHCP excluded-address IP 10.202.121.196
!
IP dhcp pool testingdhcp
Network 10.202.19.0 255.255.255.0
router by default - 10.202.19.1
10.202.152.21 DNS server
!
!
analysis of IP device
!
MLS qos map policed dscp 0 10 18 24 46-8
MLS qos map cos-dscp 0 8 16 24 32 46 48 56
MLS qos srr-queue input bandwidth 70 30
MLS 1 80 90 qos srr-queue input threshold
priority-queue input bandwidth 2 30 MLS qos srr-queue
queue threshold 1 MLS qos srr-queue input cos-map 2 3
queue threshold 1 MLS qos srr-queue input cos-map 3 6 7
queue threshold 2 MLS qos srr-queue input cos-map 1 4
queue threshold 1 MLS qos srr-queue input dscp-map 2 24
queue threshold 1 MLS qos srr-queue input dscp-map 3 48 49 50 51 52 53 54 55
queue threshold 1 MLS qos srr-queue input dscp-map 3 56 57 58 59 60 61 62 63
queue threshold 2 MLS qos srr-queue input dscp-map 3 32 33 40 41 42 43 44 45
-More - mls qos srr-queue input dscp-map 2 3 46 47 threshold queue
queue threshold cos 1-map of MLS qos srr-queue output 3 4 5
queue threshold cos 2-map of MLS qos srr-queue output 1 2
queue threshold 2 cos-MLS qos srr-queue output 2 3 card
queue threshold cos 2-map of MLS qos srr-queue output 3 6 7
queue threshold cos 3-map of MLS qos srr-queue output 3 0
queue threshold 4 cos-MLS qos srr-queue output 3 1 card
queue threshold 1 dscp-map of MLS qos srr-queue output 3 32 33 40 41 42 43 44 45
queue threshold 1 dscp-map of MLS qos srr-queue output 3 46 47
queue threshold 2 dscp-map of MLS qos srr-queue output 1 16 17 18 19 20 21 22 23
queue threshold 2 dscp-map of MLS qos srr-queue output 1 26 27 28 29 30 31 34 35
queue threshold 2 dscp-map of MLS qos srr-queue output 1 36 37 38 39
queue threshold 2 dscp-map of MLS qos srr-queue output 2 24
queue threshold 2 dscp-map of MLS qos srr-queue output 3 48 49 50 51 52 53 54 55
queue threshold 2 dscp-map of MLS qos srr-queue output 3 56 57 58 59 60 61 62 63
queue threshold 3 dscp-map of MLS qos srr-queue output 3 0 1 2 3 4 5 6 7
queue threshold 4 dscp-map of MLS qos srr-queue output 1 8 9 11 13 15
queue threshold 4 dscp-map of MLS qos srr-queue output 2 10 12 14
MLS qos all the output queue 1 1 100 100 50 200 threshold
MLS qos queue of output 1 all threshold 2 125 125 100 400
MLS qos queue of output 1 all threshold 3 100 100 100 400
MLS qos queue of output 1 all 4 60 150 50 200 threshold
MLS qos all the output queue 1 15 25 40 20 buffers
MLS qos
!
Crypto pki trustpoint TP-self-signed-1210376576
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1210376576
revocation checking no
rsakeypair TP-self-signed-1210376576
!
!
TP-self-signed-1210376576 crypto pki certificate chain
certificate self-signed 01
xxxxxxxxx
quit smoking
Auto qos srnd4
control-dot1x system-auth
dot1x critical eapol
!
!
!
!
pvst spanning-tree mode
spanning tree extend id-system
VLAN spanning tree priority 819 61440
!
internal allocation policy of VLAN ascendant
!
VLAN 121
name Voice_Vlan
!
VLAN 819
name 19F_VLAN
!
VLAN 888 899
!
!
class-map correspondence AUTOQOS_VOIP_DATA_CLASS
match ip dscp ef
class-map correspondence AUTOQOS_DEFAULT_CLASS
match the name of access by DEFAULT ACL-AUTOQOS group
class-map correspondence AUTOQOS_VOIP_SIGNAL_CLASS
match ip dscp cs3
class-map correspondence AutoQoS-VoIP-RTP-Trust
match ip dscp ef
class-map correspondence AutoQoS-VoIP-control-Trust
match ip dscp cs3 af31
!
!
Policy-map AUTOQOS-SRND4-CISCOPHONE-POLICY
class AUTOQOS_VOIP_DATA_CLASS
DSCP ef Set
128000 8000 exceed-action of the police controlled-dscp-transmit
class AUTOQOS_VOIP_SIGNAL_CLASS
DSCP Set cs3
32000 8000 exceed-action of the police controlled-dscp-transmit
class AUTOQOS_DEFAULT_CLASS
Set default dscp
10000000 8000 exceed-action of the police controlled-dscp-transmit
Policy-map AutoQoS-Police-CiscoPhone
class AutoQoS-VoIP-RTP-Trust
DSCP ef Set
320000 8000 exceed-action of the police controlled-dscp-transmit
class AutoQoS-VoIP-control-Trust
DSCP Set cs3
32000 8000 exceed-action of the police controlled-dscp-transmit
!
!
!
!

interface FastEthernet1/0/4
switchport access vlan 819
switchport mode access
switchport voice vlan 121
authentication event fail following action method
action of death event authentication server allow voice
no response from the authentication event action allow vlan 889
living action of the server reset the authentication event
multi-domain of host-mode authentication
authentication order dot1x mab
authentication priority dot1x
Auto control of the port of authentication
MAB
added mac-SNMP trap notification change
deleted mac-SNMP trap notification change
dot1x EAP authenticator
dot1x tx-time 10
spanning tree portfast
!

!
interface Vlan1
no ip address
!
interface Vlan819
IP 10.202.19.11 255.255.255.0
!
default IP gateway - 10.202.19.1
IP classless
IP http server
IP http secure server
!
!
IP access-list extended by DEFAULT ACL-AUTOQOS
allow an ip
IP access-list extended redirection
deny udp any eq bootpc any eq bootps
deny udp any any eq bootps
deny udp any any eq field
deny ip any host 10.202.154.192
allow an ip
!
!
SNMP - server RO Cisco123 community
RADIUS attribute 6 sur-pour-login-auth server
Server RADIUS attribute 8 include-in-access-req
RADIUS attribute 25-application access server include
dead-criteria 30 tent 3 times RADIUS server
RADIUS-server host 10.202.152.91 auth-port 1645 acct-port 1646 borders 7 xxxxxxxxxxxxxxxxxxxxxxxx
RADIUS-server host 10.202.152.92 auth-port 1645 acct-port 1646 borders 7 xxxxxxxxxxxxxxxxxxxxxxx
RADIUS vsa server send accounting
RADIUS vsa server send authentication

I had a similar problem the workstations where the value "of the computer or user authentication" in the PEAP protocol settings. What is happening is that list DACL that served as of when the computer account has been authenticated restricted just DCs etc, but don't understand the locations required for the login script. It seems that Windows 7 user logon script runs before the dot1x presents the user credentials to the switch.

Thus, in our case, we have modified the DACL is in place for the computer account to allow access to the locations required for the login script (i.e. the network sharing servers), and everything works.

Script to place the image folder to 100%, one image per page?

I'm looking for a script that can drop a folder of images in an ID doc to 100%, one page per image, with the name of the file image below. I tried various Board-contact scripts, but these scale images to fit the page. I need the images to be placed at 100%, so a customer can view them to their exact size.

Any help would be much appreciated. Thank you!

Try this,

var doc = app.activeDocument;
var w =doc.documentPreferences.pageWidth;
var h = doc.documentPreferences.pageHeight;
doc.viewPreferences.rulerOrigin = RulerOrigin.pageOrigin;
var _folder = Folder.selectDialog("Select a folder");
var _files = _folder.getFiles();

for(var i =0;i<_files.length;i++)
{
        if(_files[i] instanceof File)
        {
                var image = doc.pages.item(-1).place(_files[i]);
                var gb = image[0].parent.geometricBounds;
                var imageheight = gb[2] - gb[0];
                var imagewidth = gb[3] - gb[1];
                image[0].parent.geometricBounds = [(h-imageheight)/2,(w-imagewidth)/2,(h-imageheight)/2+imageheight,(w-imagewidth)/2+imagewidth];
                image[0].parent.fit(FitOptions.CONTENT_TO_FRAME)
                doc.pages.add(LocationOptions.AT_END);
            }
    }
doc.pages.item(-1).remove();

Kind regards

Cognet

Best way to configure MySQL connection scripts for hosts the remote and

I'm curious to know if there is an effective way to do it. I have my local MAMP server test, then a remote server, both with MySQL. Pages requiring PHP and databases at the start with a link to my login script. However, the connection to my local details vary my remote servers. I have two login scripts and need to change the link of each page when I download, or have a login script and change it directly whenever I'm working between the two.
How will people work effectively in environments the and remote?

The login script does not have to be in your PHP pages. Not good security. It should be above the root of the Web site, where it is not accessible via http. The name of the file containing the script of the same for the remote and local, even if the content is different.

Then your PHP pages call a file with the same name and you don't need to change anything.

require_once '... /... / / here. Connection.php';

Also note that the file name begins with a period that allows to hide.

.dat or .msi in the ThinReg login script?

When I create a ThinApp, I create an msi file, and sometimes ThinApp creates the .dat rather than the .exe file. I'm a bit puzzled as what to put in my login script that works ThinReg. Can I put \\server\path\xxx.dat or \\server\path\xxx.msi? Or is it important? Thank you.

You use the exe (No .dat or msi) for ThinReg.

The MSI file will contain ThinReg itself and that's why he recorded the ThinApp (ThinReg) when the MSI is installed.

Please see this post on the use of login script ThinReg:

http://blogs.VMware.com/ThinApp/2008/10/ThinApp-thinreg.html

Script for layer redundant batch delet

I have thousands of files in different folders, each file has the same layer named "job Info". Can someone help me to write a script for led this layer per-folder?
I expected, the script tells me that I need to select a folder, then it can automatically open files, del layer "job info" then save the file, rewrite, close file

Hello

Try this.
```
var folder = Folder.selectDialog ("Select the root folder");
var myfiles = [];
getsubfolderfiles(folder);
for(var i =0;i -1){
                myfiles.push(filelist[i]);
            }
        }
    }
}
```
Kind regards

Cognet

Photoshop layer redesign, rename the script for Illustrator

The Photoshop scripting guru Paul R more to RetouchPro has created a really cool to rename script and layers of selected Photoshop batch numbers. I did find something similar on the side of the Illustrator.

He gave his permission for me to post it here in hopes that some Illustrator scripting genius could come up with a similar script for Illustrator. It would be terribly difficult to convert into something that could use Illustrator?

http://www.mediafire.com/file/g7usr73u0236p0a/rename _ & _Renumber_Selected_Layers.jsx

http://www.mediafire.com/file/dbah74x13bsa74c/rename _ & _Renumber_Selected_Layers.jsx.zip

Hola Julio, I updated the script to rename the sublayers or visible layers and also fixed the color

#target illustrator

main();
function main(){
    if(!documents.length) return;
    //var allLayers = app.activeDocument.layers;
    var win = new Window( 'dialog', '' );
    g = win.graphics;
    //  var myBrush = g.newBrush(g.BrushType.SOLID_COLOR, [0.99, 0.99, 0.99, 1]); // CS5
    var myBrush = g.newBrush(g.BrushType.SOLID_COLOR, [0.50, 0.50, 0.50, 1]); // CS6
    g.backgroundColor = myBrush;
    win.orientation='stack';
    win.p1= win.add("panel", undefined, undefined, {borderStyle:"black"});
    win.g1 = win.p1.add('group');
    win.g1.orientation = "row";
    win.title = win.g1.add('statictext',undefined,'Rename Visible Layers or Sublayers');
    win.title.alignment="fill";
    var g = win.title.graphics;
    g.font = ScriptUI.newFont("Georgia","BOLDITALIC",22);
    win.g5 =win.p1.add('group');
    win.g5.orientation = "column";
    win.g5.alignChildren='left';
    win.g5.spacing=10;
    win.g5.st1 = win.g5.add('statictext',undefined,'New layer name');
    win.g5.et1 = win.g5.add('edittext');
    win.g5.et1.preferredSize=[250,20];
    win.g10 =win.p1.add('group');
    win.g10.orientation = "row";
    win.g10.alignment='fill';
    win.g10.spacing=10;
    win.g10.st1 = win.g10.add('statictext',undefined,'Serial Number');
    win.g10.et1 = win.g10.add('edittext',undefined,'1');
    win.g10.et1.preferredSize=[50,20];
    win.g10.et1.onChanging = function() {
      if (this.text.match(/[^\-\.\d]/)) {
        this.text = this.text.replace(/[^\-\.\d]/g, '');
      }
    };
    win.g10.st1 = win.g10.add('statictext',undefined,'Length');
    var nums=[2,3,4,5];
    win.g10.dl1 = win.g10.add('dropdownlist',undefined,nums);
    win.g10.dl1.selection=0;
    win.g15 =win.p1.add('group');
    win.g15.orientation = "row";
    win.g15.alignment='fill';
    win.g15.cb1 = win.g15.add('checkbox',undefined,'Reverse layer order');
    win.g15.cb2 = win.g15.add('checkbox',undefined,'Rename Sublayers Only');
    win.g100 =win.p1.add('group');
    win.g100.orientation = "row";
    win.g100.alignment='center';
    win.g100.spacing=10;
    win.g100.bu1 = win.g100.add('button',undefined,'Rename');
    win.g100.bu1.preferredSize=[120,30];
    win.g100.bu2 = win.g100.add('button',undefined,'Cancel');
    win.g100.bu2.preferredSize=[120,30];
    win.g100.bu1.onClick=function(){
        if(win.g5.et1.text == ''){
            alert("No layer name has been entered!");
            return;
        }
        win.close(0);

        var sublayersOnly = win.g15.cb2.value;
        var visibleLayers = [];
        getVisibleLayers (app.activeDocument, visibleLayers, sublayersOnly);

        if(win.g15.cb1.value) visibleLayers.reverse();

        for(b=0; b

Apply Find & Replace Script for. INDB?

Hi Chaps,
Is it possible to apply a script to search for and replace type to an InDesign book (CS4 > .indb)?
I have a folder .indb that my have a number of documents, each with the word 'EURO' in a number of tables. I want to change that to "GBP" in all documents, but would like to automate the process, instead of manually apply the script to each document.
Does anyone know of a script for this?
Much thanks
Samuel

Well, it's also quite possible to have a script open all documents, make your operations on each and then close them. See, for example, http://forums.adobe.com/message/2072111#2072111

Google around scripts more - I've written several that do similar things.

login script for permission of a folder to a standard user.

Similar Questions

Maybe you are looking for