Login to Fedora 14 molten MacPro

Similar Questions

• Incredibly slow MacPro running El Capitan 10.11.6

  I have serious problems with my MacPro, and many of my problems seem to have arisen when I moved to El Capitan. My computer starts fine, but takes an excessive length - 10 - 15 minutes - to launch Apple Mail and InDesign 2015 CC in the Creative Suite. It's frustrating and I'm not sure what to do. I am a complete klutz when it comes to the "mechanics" of Mac with their operating system, even if I'm working with them since my first SE and PageMaker 1.0. My Mac over the years have run softly and I've met not something like what confronts me now. I don't know what to do - I do give up the machine and buy a new one, or is my MacPro "recoverable"? I found mention of EtreCheck on a post last night so I downloaded and it ran today. I hope someone can give me some guidance as to what I do then. Here's the report from EtreCheck:

  EtreCheck version: 2.9.13 (267)

  Report generated 2016-08-11 18:03:53

  Download https://etrecheck.com EtreCheck

  Duration 19:37

  Performance: poor

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Verify the signatures of Apple: enabled

  Problem: The computer is too slow

  Description:

  Apple Mail and InDesign take a long time to start

  Hardware information: ⓘ

  Mac Pro (mid-2010)

  [Technical details] - [User Guide] - [warranty & Service]

  Mac Pro - model: MacPro5, 1

  2 2.4 GHz Quad - Core Intel Xeon processor: 8 strands

  8 GB of RAM expandable - [Instructions]

  DIMM 1

  ok 1 GB DDR3 ECC 1066 MHz

  DIMM 2

  ok 1 GB DDR3 ECC 1066 MHz

  DIMM 3

  ok 1 GB DDR3 ECC 1066 MHz

  DIMM 4

  ok 1 GB DDR3 ECC 1066 MHz

  DIMM 5

  ok 1 GB DDR3 ECC 1066 MHz

  DIMM 6

  ok 1 GB DDR3 ECC 1066 MHz

  DIMM 7

  ok 1 GB DDR3 ECC 1066 MHz

  DIMM 8

  ok 1 GB DDR3 ECC 1066 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en2: 802.11 a/b/g/n

  Video information: ⓘ

  ATI Radeon HD 5770 - VRAM: 1024 MB

  LED Cinema Display 1920 x 1200

  System software: ⓘ

  OS X El Capitan 10.11.6 15G (31) - since the start time: about 2 days

  Disk information: ⓘ

  HL-DT-ST DVD - RW GH61N)

  WDC WD1001FALS-41Y6A0 disk1: (1 TB) (rotation)

  EFI (disk1s1) < not mounted >: 210 MB

  Macintosh HD (disk1s2) /: 999,35 go-go (261,84 free)

  Recovery HD (disk1s3) < not mounted > [recovery]: 650 MB

  WDC WD1500HLFS-01G6U3 disk0: (150,04 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  PRO (disk0s2) Volumes/WORK IN PRO WORK: 149,70 (GB 124,84 free)

  USB information: ⓘ

  Imation ImationFlashDriv 7.74 GB

  POCKET (disk3s1) / Volumes/POCKET: 7.74 GB (3.10 GB free)

  Seagate Backup + 4 to office

  < not mounted > (disk5s1) disk5s1: 134 MB

  Seagate Backup Plus drive 02 (disk5s2) / Volumes/Backup Seagate Plus disc 02: 4.00 TB (2.86 to free)

  Brother HL-2140 series

  Seagate Backup + M 4 to Office

  EFI (disk4s1) < not mounted >: 315 MB

  Seagate Backup Drive (disk4s2) Volumes/Seagate Backup plus Drive: 3.50 TB (126,14 GB free)

  Apple Inc. Apple LED Cinema Display

  ISight Apple Display Inc.

  Apple Inc. Apple's USB audio device

  Hub keyboard Apple, Inc.

  Mitsumi Electric Apple USB optical mouse

  Apple, Inc. Apple Keyboard

  Western Digital My Book 1234

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Kernel Extensions: ⓘ

  /Applications/DiskWarrior.app

  com.alsoft.Preview [no charge] (5.0 - SDK 10.5 - 2014-12-03) [Support]

  / Applications/Toast 10 Titanium/Toast Titanium.app

  com.roxio.BluRaySupport [no charge] (1.1.6 - 2012-09-27) [Support]

  [no charge] com.roxio.TDIXController (1.7-2012-09-27) [Support]

  / System/Library/Extensions

  com.seagate.driver.PowSecDriverCore [no charge] (5.2.6 (26977) - 10.4 SDK - 2016-08-02) [Support]

  [no charge] com.Wacom.kext.wacomtablet (Tablet Wacom 6.1.6 - 4 - 2016-08-02) [Support]

  [no charge] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9 - 2016-08-02) [Support]

  [loading] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9 - 2016-08-02) [Support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.6 (26977) - 10.4 SDK - 2015-01-31) [Support]

  com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.6 (26977) - SDK 10.5 - 2015-01-31) [Support]

  com.seagate.driver.SeagateDriveIcons [no charge] (5.2.6 (26977) - 10.4 SDK - 2015-01-31) [Support]

  Startup items: ⓘ

  RetroClient: Path: / Library/StartupItems/RetroClient

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 149 tasks Apple

  [operation] 66 tasks Apple

  [killed] 15 tasks Apple

  15 killed process lack of RAM

  Demons of launch system: ⓘ

  com.Apple.csrutil.report.plist [failure]

  [operation] com.seagate.TBDecorator.plist (2013-10-12) [Support]

  [loaded] 45 tasks Apple

  [loading] 150 tasks Apple

  [operation] 83 tasks Apple

  [killed] 11 tasks Apple

  11 killed process lack of RAM

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-08-09) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-07-15) [Support]

  [operation] com.adobe.AdobeCreativeCloud.plist (2016-04-12) [Support]

  [failure] com.adobe.CS4ServiceManager.plist (2010-09-16) [Support]

  [failure] com.adobe.CS5ServiceManager.plist (2010-11-15) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2014-07-31) [Support]

  [operation] com.teamviewer.teamviewer.plist (2012-10-01) [Support]

  [operation] com.teamviewer.teamviewer_desktop.plist (2012-10-01) [Support]

  [operation] com.wacom.wacomtablet.plist (2010-11-16) [Support]

  Launch of the demons: ⓘ

  [operation] com.adobe.ARMDC.Communicator.plist (2016-07-15) [Support]

  [operation] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-15) [Support]

  com.adobe.SwitchBoard.plist [no charge] (2013-01-11) [Support]

  [operation] com.adobe.adobeupdatedaemon.plist (2016-06-12) [Support]

  [loading] com.adobe.agsservice.plist (2016-04-12) [Support]

  [loading] com.adobe.fpsaud.plist (2016-06-29) [Support]

  [loading] com.adobe.versioncueCS4.plist (2010-09-16) [Support]

  com.attotech.attomgtd.plist [no charge] (2009-05-05) [Support]

  [loading] com.bombich.ccc.plist (2012-11-27) [Support]

  [no charge] com.bombich.ccc.scheduledtask.96191F55-0BA5-4914-A91E-40E96DD3703C.plist (2013-01-23) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2015-09-29) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2014-07-31) [Support]

  [loading] com.retrospect.engine.updater.plist (2012-04-19) [Support]

  com.Retrospect.Retroengine.plist [no charge] (2015-06-29) [Support]

  [operation] com.retrospect.retroisa.plist (2012-10-17) [Support]

  [loading] com.roxio.UpdateRetrospect.plist (2010-07-23) [Support]

  [operation] com.teamviewer.teamviewer_service.plist (2012-10-01) [Support]

  Launch User Agents: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2012-09-28) [Support]

  [failure] com.adobe.ARM. [...]. plist (2012-09-28) [Support]

  [failure] com.adobe.ARM. [...]. plist (2013-12-21) [Support]

  [failure] com.adobe.ARM. [...]. plist (2012-09-28) [Support]

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist (2015-04-19) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-07-05) [Support]

  User login items: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Wondershare Helper Application compact (~/Library/Application Support/Helper/Wondershare Helper Compact.app)

  Request for DiskWarriorDaemonStarter (/ Applications/DiskWarrior.app/Contents/Helpers/DiskWarriorStarter.app)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Other applications: ⓘ

  com.adobe.Acrobat.Pro.46112 [loading]

  [ongoing] com.adobe.CCLibrary.118112

  [ongoing] com.adobe.CCXProcess.118432

  [ongoing] com.adobe.InDesign.56032

  [ongoing] com.adobe.Photoshop.57952

  [operation] com.adobe.acc.AdobeDesktopService.163552.1900AE43-AC19-4EF9-A530-10707857FAF2

  [ongoing] com.Adobe.accmac.118752

  [ongoing] com.etresoft.EtreCheck.292832

  com.fiplab.MemoryCleanHelper [loading]

  [ongoing] com.fiplab.memoryclean.89312

  [ongoing] com.google.Chrome.72672

  com.jdibackup.JustCloud.autostart [failure]

  com.jdibackup.JustCloud.backupstart [failure]

  com.jdibackup.JustCloud.notify [failure]

  [ongoing] com.macpaw.CleanMyMac3.Menu.142752

  [ongoing] com.wacom.TabletDriver.161632

  [ongoing] com.Wondershare.helper_compact.159712

  [ongoing] JP.co.Canon.cijscannerregister.193952

  [ongoing] org.Mozilla.Firefox.69152

  [loading] 437 tasks Apple

  [operation] 222 tasks Apple

  [killed] 26 tasks Apple

  Internet Plug-ins: ⓘ

  WacomNetscape: 1.1.1 - 1 (2010-11-16) [Support]

  Default browser: 601 - SDK 10.11 (2016-07-28)

  AdobeExManDetect: AdobeExManDetect 1.1.0.0 - SDK 10.7 (2015-11-17) [Support]

  Flip4Mac WMV Plugin: 2.3.8.1 (2011-01-14) [Support]

  OfficeLiveBrowserPlugin: 12.3.4 (2012-09-28) [Support]

  AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-06-12) [Support]

  AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-09) [Support]

  FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-07-17) [Support]

  Silverlight: 5.1.41212.0 - SDK 10.6 (2016-05-17) [Support]

  QuickTime Plugin: 7.7.3 (2016-07-28)

  Flash Player: 22.0.0.209 - SDK 10.9 (2016-07-17) [Support]

  iPhotoPhotocast: 7.0 - 10.7 SDK (2012-09-28)

  SharePointBrowserPlugin: 14.6.6 - SDK 10.6 (2016-07-18) [Support]

  AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-09) [Support]

  WacomSafari: 1.1.1 - 1 (2010-11-16) [Support]

  EPPEX plugin: 3.0.5.0 (2009-07-30) [Support]

  JavaAppletPlugin: Java 8 update 91 build 14 version Check (2016-05-06)

  The internet user Plug-ins: ⓘ

  CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-26) [Support]

  3rd party preference panes: ⓘ

  Adobe Version Cue CS4 (2010-09-16) [Support]

  Flash Player (2016-06-29) [Support]

  Flip4Mac WMV (2011-01-14) [Support]

  Java (2016-05-06) [Support]

  Paragon NTFS for Mac® OS X (2016-07-15) [Support]

  Perian (2011-07-24) [Support]

  Retrospective (2012-10-17) [Support]

  Seagate for Mac OSX dashboard (2015-06-09) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 999,35 GB disc used: 737,51 GB

  Destinations:

  Backup drive Seagate Plus [Local]

  Total size: 3.50 TB

  Total number of backups: 62

  An older backup: 16/03/16, 12:56

  Last backup: 08/11/16, 16:31

  Size of backup drive: Excellent

  Size of backup 3.50 TB > (disk size 999,35 GB X 3)

  Top of page process CPU: ⓘ

  48% retroISA

  9% WindowServer

  6% CEPHtmlEngine Helper (10)

  4% kernel_task

  2% plugin-container

  Top of the process of memory: ⓘ

  1.18 GB RetroISA

  1020 MB kernel_task

  Firefox 999 MB

  647 MB mdworker (21)

  Com.apple.WebKit.WebContent (5) 426 MB

  Information about virtual memory: ⓘ

  219 MB of free RAM

  7,77 used GB RAM (1.62 GB being cached)

  10.51 Go Swap used

  Diagnostic information: ⓘ

  August 11, 2016, 14:44:49 ~/Library/Logs/DiagnosticReports/Mail_2016-08-11-144449_[redacted].crash

  /Applications/mail.app/Contents/MacOS/mail

  August 11, 2016, 12:29:16 ~/Library/Logs/DiagnosticReports/Mail_2016-08-11-122916_[redacted].crash

  10 August 2016, 21:28:05 ~/Library/Logs/DiagnosticReports/plugin-container_2016-08-10-212805_[redacted]. Crash

  /Applications/Firefox.app/Contents/MacOS/plugin-container.app/Contents/MacOS/PL Marcel-container

  August 10, 2016, 18:17:09 /Library/Logs/DiagnosticReports/RetroISA_2016-08-10-181709_[redacted].crash

  / Library/Application Support/Retrospect/RetrospectInstantScan.bundle/Contents/MacOS/RetroISA

  9 August 2016, 21:54:17 test - passed

  9 August 2016, 21:06:51 ~/Library/Logs/DiagnosticReports/plugin-container_2016-08-09-210651_[redacted]. Crash

  August 9, 2016, 04:06:30 /Library/Logs/DiagnosticReports/RetroISA_2016-08-09-040630_[redacted].crash

  Any advice will be accepted with gratitude.

  See you soon

  TFC 1951 = | (: O).

  OK, you can start by completely uninstall CleanMyMac3 and MemoryClean instructions of developers. See if it improves things a bit.

  Given the long duration of the Etrecheck, it is also possible that the boot disk has failed.

• No standby on MacPro after you install the security update

  10.10.5 Yosemite system

  MacPro early 2009 (4.1)

  2015 security-006 installed by download file update

  Problem now:

  No Sleep Mode more via

  -Button at the login screen

  -Apple menu

  -Parameters in the Pref Pane

  -Shortcut

  This is what happens:

  Screen goes to sleep but

  -fans are always

  -HDs turn

  -Boot HD work sounds

  -small power light is not 'breathing '.

  What I've done so far:

  Resets do

  -Energy records Standard parameters

  -MSC

  NVRAM EXTRA

  Started in Mode safe

  Tested on a fresh user account

  Repaired access rights

  Results: No "standby"

  Secuity update version before was 2015-003 or 004.

  Sleep Mode worked without problem.

  I took the same file to update two iMacs (2009), an iMac (2014) and a MacBook Pro (2011) - no problem.

  Suggestions for Restore Mode features Eve for the MacPro would be great.

  Thank you

  Wipe the drive and reinstall OS X properly:

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• MacPro with new El Capitan update does not start with two monitors

  Does anyone have a fix for this? I updated last night and now it seems to start both monitors in wide screen mode. I have to unplug a monitor and do a hard reboot to see my login screen. Any help would be appreciated.

  new MacPro (end of 2013), Yosemite 10.11.2 3.5 ssd flash 6-core

  Thank you

  -

  What follows?

  have you tired by ensuring that everyone is on a different port TB.

  For what to ports are on which bus see:

  Use multiple screens with your Mac Pro (end 2013) - Apple Support

• How to install Fedora 18 9 VMware Workstation for Windows?

  When I try to install Fedora 18 64-bit Setup fails quickly.

  If I install "natively" I get through the installation, but all I get is a blank login screen.

  Then... there at - there a secret to Getting Fedora 18 to install with 9 Workstation? Fedora 17 installs without a hitch.

  I solved your problem doing a profile of compatibility of equipment downgrade from v9 to 6.5/7.x

• Virtual terminals does not work in Fedora 17, graphic Dekstop lock

  IHello Folks,

  Looking for comments on the following question:

  • After a complete update YUM in Fedora 17, reboot, the office starts but the login window is never displayed.
    • VMWare Tools is installed an update
    • Trying to run a Virtual Terminal with CTR + ALT + F2 (or F3, F4,. etc.) also fails. Console is present, but is locked displays the latest GRUB messages.
  • If I edit the GRUB config commenting launch X server, the virtual console very good works and I can connect, run the commands, etc.

  I'm under Fusion 5.0.2 in a Mid 2012 13 - Inch Macbook AIr, OS X10.8.2; I don't have this problem with CentOS 6.3 in Fusion or REL6.3 in my computer 9.

  My guess is that this is related to the graphics driver to Fedora. Graphics driver is VESA. Someone has seen this before or have any advice on how to troubleshoot or debug?

  Thank you!

  Wilbur

  Try disabling 3D graphics acceleration in the Virtual Machine settings Fedora 17 and see if that makes a difference.  Take a look on: Activate the 3D Graphics acceleration

• Login screen hangs

  Hello.  Since I upgraded to macOS Sierra, my early 2015 MacBook Pro freezes on the login screen.  I tried clean install, reinstall, SMC reset, reset the NVRAM.  Nothing seems to help.  I can finally drag the cursor to the button stop, but it takes a while.  Once it starts up again it is fine... until I have restart or stop again.  Any thoughts?  Thank you.

  Try to start in safe mode (hold down the key of the SIFT when starting) once or twice. The login screen freezes?

• After Malware that my login is disabled cannot start in safe mode

  Hi if anyone can help.

  A friend tried to watch movies online, I'm not sure of the site they visited, but were asked to install MacKeeper and I believe that they did, as I noticed it was to download and installed the following day and I asked them why they did this and they said it was the only way to watch movies!

  Anyway to cut a long story short my friend then called me to say they received a "pop" window to say that my computer has a virus and call a number of 1800... I told them to do nothing certainly not call the number and I would like to sort.

  So basically since then that then I can not connect to my main account at the start, the section where you type your password won't let me type into it and there is a symbol of the brand of 'question' next to it. If I hold my mouse over the question mark I get a dialog box stating "Please enter your password to iCloud as... as well as the date. I can only login as a guest and I cannot connect in 'safe' mode by holding down the SHIFT key.

  I deleted the MacKeeper Application (and also another OS player application that is newly installed the same day!) and empty the memory cache of my browsers and also now upgraded to 10.11.6

  I also run disk utilities, but still I'm getting this problem trying to connect to my main user account!

  I think that it is some kind of malware, does anyone have ideas how to solve at least the connection problem?

  If I could stamp out to see if there is any malware stuff going on behind the scenes it would be too great!

  All suggestions welcome.

  Thanks, Ciaran

  

  How did you uninstall the MacKeeper application? Please be as specific as possible, unless you have followed the steps, I suspect that your system has installed to uninstall. If this is the case then you will need to re-install and uninstall immediately by following the instructions of developers. Otherwise, the best thing to do is to do a wipe and installing OS X and then manually install your applications and restore your data from your Time Machine backup.

  I'm sure you probably learned to not let this 'friend' enter the 100' of your computer.

• Login screen of change in the Sierra

  I wish to have an image that is displayed when the connection. How can I do that. Photo of connection used to be located in the Caches folder but no more.

  Please do not suggest changing the wallpaper in the system preferences is not what I am referring is login screen image that I would like to replace.

  Any help appreciated.

  My image of login is in the folder Macintosh HD/Library/Caches, as it has always been.

  Check again.

• BONES of Sierra crashing to the LOGIN screen while using the service of mission control.

  After Sierra OS upgrade my MacBook Pro hangs on login screen every time I have used the function of mission control.

  Hey hernj103,

  Thank you for using communities of Apple Support. I can see your post after upgrading to Mac OS Sierra that reboots your MacBook Pro, if you use mission control. There could be a number of reasons that could cause this and I want to help you have a reliable working Mac, so I'm here to help! If you have not already done, you want to make sure that you have a backup of your data and you can use the option in the link below:

  Use Time Machine to back up or restore your Mac

  Once your data is secure, you'll want to test this function in Mode safe mode and see if you get the same effect. Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. Also, it verifies your startup disk and trying to fix problems if necessary directory and delete font caches, hiding the kernel and other files of the system cache. The following link can show you how to start your MacBook Pro in Mode safe.

  Try safe mode if your Mac does not end commissioning

  If you continue to have problems after the safe boot mode, let know us and we can continue to solve the problems there.

  See you soon.

• My MacPro is too old for Sierra

  When I close the Pages and Numbers, I continue to receive notices to upgrade applications to the version of Sierra but my MacPro is too old to upgrade to Sierra.  How can I avoid these app upgrade notice.

  See if, 'hide', Pages, and Numbers helps > hide and expose the purchases in the Mac App Store - Apple Support

• problem starting MacPro

  Hello

  My Macpro 2.1 suddenly cannot start. When turned on, it shows the Apple logo, and

  whirlly movement, then the screen becomes white lost the signal from the graphics card.

  This could be the problem with the graphics card? Or the hard drive or CMOS?

  Thanks in advance.

  Probably a graphics card especially if yo have the original still installed map.

  However

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

  Select a replacement if necessary graphics card, see:

  Tip: Mac cards replacement Graphics Pro money Tour (2006-2012)

• Can I change the login email address?

  When I initially set up my Mac Pro, I used my google e-mail address as my internet cable connection.  Now, I want to change that, so I can use my mac address.  How can I change this initial login e-mail address?

  What do you mean by "my internet cable connection?

  Just where you connect on the Mac?

  Looks like you need to contact your cable provider to change.

• Black login screen

  When starting, a black login screen prevents my screen 4 K of login in. Computer must be stopped with force and restarted. Memory NVRAM/PRAM resetting has not helped.

  It seems that it is a problem with the mac and display negotiate the appropriate resolution.

  You can use the mac at all? After the reboot, does it work?

  It works with a different view?

  You can try to connect "blind"? It is possible that after a disconnection of the display and the figure of mac it. (Weird, I know; but it is not really difficult to connect even without the screen, if you know what position in the list, your account is just press the left or right arrow keys, enter, password, enter).

  Maybe better, if you have access to another mac, use the screen sharing feature to connect; then go to system-> Display Preferences and try to choose a frame that works.

• Login password

  My connection password is often not recognized, and I need to change to get it working again. I know it's just because I write it. I was told is a question of Mac OS X. I have a Mac OS X El Capitan 10.11.6.

  Thanks in advance!

  Never heard of such a problem - no, not recognizing the password of a user login didn't is not a thing of OS X.

  If you are unable to connect, how do you change the password? Using a second account? Restart of thd revovery partition?

  Use accented characters to other symbols your password? What is your language/keyboard layout?

  What I say coild occur is the BONE assuming a keyboard layout when you actually have a different