Logitech speakers do not work since the installation of Windows 7 Home Premium

Similar Questions

• 4540 proBook s product C9K7O ID: Device Drivers not installed during the installation of Windows 7 Home Premium 64-bit

  I had to reinstall Windows 7 Home Premium 64 bit operating system and some of the equipment not recognized and therefore, the drivers were not installed. Can you tell me the correct drivers? That's what I see in Device Manager:

  Here's the driver page.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5229456&swLangOid=8&swEnvOid=4057

  There is a full menu of Windows 7 just pull down the menu for Windows 7 Home Premium 64 bit drivers.

  The Base system is the JMicron card reader.

  Ethernet is Realtek gigabit

  USB is Intel USB 3.0

  1 unknown is 3D Driveguard

  2 stranger's validity

• Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

  I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

  Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

  My system:

  Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

  * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

  Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

  I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

  http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

  I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

  http://www.Broadcom.com/support/Bluetooth/update.php

  I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

  On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

  Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

  Thank you for your help.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• DVD drive on laptop does not work since the installation of Windows 8

  The DVD player on my laptop would not consider movies since I installed Windows 8.  Any ideas what app or service should be addressed to make it work.  I don't know if it is a hardware problem (I doubt it, it worked fine before) or a video software problem.  Any suggestion would be appreciated.

  Unfortunately, Windows 8 does not natively support playback of DVD movies.  You need to install a Windows Media Center (no player) or a 3rd party application.

  I recommend VLC - a free, open-source media player.  It will play DVD files immediately after installation.  Additional measures must be taken if you have a Blu - Ray player on your device.

  http://www.videolan.org/VLC/index.html

• ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service pack of windows 7

  ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service windows 7 pack has worked before

  Is not fully compatible with win7, some patches are available from ATI

  http://support.AMD.com/us/KbArticles/pages/CatalystAGPHotfix.aspx

• Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

  I installed 10 64-bit Windows (original was Windows 7 64-Bit)

  My FN keys do not work after the installation of Windows 10.

  There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
  Do you know any help

  Hello

  I think that your model of laptop is not possible to Win10.
  Check it please https://forum.toshiba.eu/showthread...mation-website

• Problems with the installation of Windows 7 Home Premium: ask load the driver during installation

  I am currently using Windows XP Professional Version 2002 SP3 with specification of my computer as below:

  Intel Pentium D 3.40 GHz 3.39 GHz

  3.5 GB RAM

  I tried to upgrade to Windows 7 by restarting my computer and boot from the CD. Setup goes as usual, initially, he asked for the language installation during installation, and after I clicked OK, the window titled "Load driver" had appeared with his message as below;

  "To install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK."

  What are the problems really? Because I think I have all the necessary drivers and before that everything works fine. Where can I get the drivers? And how to solve this?

  Help, please. Thank you. :)

  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• My speakers do not work after the installation of the last

  Hello!

  After that last HP´s download from HP Support Assistant, my speakers and subwoofer (audio Beats), do not work.

  But the headphones work fine.

  Spotify does not, they say that my sound card does not recognize them.

  It's my unit:

  HP Pavilion DV-7 (IN WARRANTY)

  Nº of series 2CE2191SCM

  Prod No. DEX02UA #ABA

  Microsoft Windows 7 Home premium

  IDT High Definition Audio Codec

  Could you give me a solution step by step, easy to understand, as I don't not computer very experiance?

  Thank you very much.

  Check your model number again, I can't find the one you listed. You can get the product number by pressing Fn + ESC key or check the service Tag.

  Click on the link below. Enter your product number. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Download & save the last Audio driver.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Go into the Control Panel, programs & features - software uninstall IDT. Reboot the laptop. After loading Windows, install IDT audio by using the downloaded file.

• HP: microsoft programs do not work since the update to windows 8.1

  Since the update to windows 8.1, I was unable to access any Microsoft programs that I downloaded from the Microsoft store. I can enter the store to download games but once they are downloaded, and I click on it to open they will be just sweep upward from the taskbar and then continue straight down to the bar once again for the tasks.  I can access Microsft Word, excel, powerpoint, etc that I have purchased and downloaded from the internet.  The games through Microsoft store does not work once uploaded any ideas on how to fix it?

  Thank you

  Hello

  Welcome to the HP forums

  You can follow this tutorial:
  http://www.eightforums.com/tutorials/20291-Windows-store-apps-Troubleshooter-fix-apps-Windows-8-a.html

  If troubleshooting doesn't fix your problem, click on the link given in the yellow zone finally & follow this tutorial for fixing AppStore does not.

  Concerning

  Visruth

• Error message: no avialable pen or touchscreen and touchscreen Nuvoton HID does not work since the reinstallation of Windows 7.

  Original title: Nuvoton HID touch screen

  My touch Nuvoton HID never works since I re.installed windows 7 on it, drivers has been installed and updated but it still says that there is no stylus avialable or tactile please help it would be greatly appreciated please!

  Hi Alice sincere.

  What is the full error message that you receive?

  You can try the following steps and check if it helps:

  Method 1:

  You can try to run the hardware troubleshooter and check if it helps.

  Convenience hardware store

  Method 2:

  You can try the following steps and check if it helps:

  a. click Start, type "devmgmt.msc"(without quotes) to start search, and then press ENTER.

  b. Select and open the Device Manager.

  c. you should be able to find this device under devices to Interface or mouse and other pointing devices.

  Note: You will be able to find this device only if the device is connected to the computer.

  If you get an error that says no. Pen or press enter is available for this display and the device is connected, you may need to update the drivers for this device.

  d. double-click device and click the driver tab and try to update the device.

  For more information, see the articles:

  Updated a hardware driver that is not working properly

  Update drivers: recommended links

  You can also get in touch with Nuvoton support to update the latest version of the driver:

  http://www.Nuvoton.com/HQ/ENU/ProductAndSales/ProductLines/ComputerIC/pages/default.aspx

  Also see the articles:

  Using touch gestures

  Improvements in Tablet PC

• Product key is not accepted after the upgrade in Windows 7 Home Premium to Windows 7 Ultimate.

  I changed to a new computer that has windows 7 on it and I used my upgrade to ultimate but it will not take the proudct key.  I'm guessing that because he was on the old computer.  How do I just get a new key or change from the old computer?

  I think that I wrote the wrong computers had windows 7 Home premium top and I used my upgrade to ultimate on both.  However the new said that this is not a valid product key for the upgrade.  How can I just get a new key?

  Original title: I upgraded my computer to Windows 7 Ultimate, but it won't take my product key

  If the new computer comes with Windows 7 Home Premium or another edition of Windows 7, just use the Windows 7 Ultimate product key and do an Express Windows 7 Ultimate upgrade from in the edition of Windows 7 you are now running on the computer.

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and upgrade Express from Windows 7 to Windows 7 Ultimate edition. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

• We continue the installation of Windows 7 Home Premium OEM purchase, get error 0 x 80070057.

  It fails to format the selected partition.  ATP, he did the system disk 0 partition 1 100.0 mb; disk 0 partition 2 128.0 MB MSR (reserved); disk 0 partition 3 1862.8 GB primary... This last partition is where he tries to install Windows 7 Home Premium OEM (new drive through Newegg). I searched far and you have:

  * check the cable SATA and know if it is in place or not

  * changed to another SATA cable in the case where it was defective

  * verified with diskpart to see that the disk is TPG, is apparently (had implicit message was MBR, it uses diskpart to TPG)

  * Down the hd in the 2nd slot start 6-port hd

  The motherboard is ASUS crosshair formula-Z 64-bit v

  The hard drive is Seagate Barracuda ST2000dm001 7.2 K 64 m

  Windows 7 Home Premium 64 bit OEM

  We are puzzled at the present time.  Any help to know why does move not Windows 7 would be appreciated. Any questions, just ask. Thank you!

  Original title: son is building a game system, new everything. When you are ready to install windows 7 Home Premium oem bought, continue us to get error 0 x 80070057.

  Delete all partitions/volumes on the drive # (ex: disk 0) that you want to install Windows 7 as UEFI system on until # shows like unallocated disk space.

  When you are finished, click on/tap on New, apply (for the size of the disk) and OK.

  You'll notice that the drive has now been formatted as GPT with 3 partitions. Select the "Primary" 3 partitionand click/click on Next.

  NOTE: You may receive a warning "Windows can not be installed on disk 0" , but also long as you can click on the button Next , you're fine.

  Note: The 3 partitions are:

  • Partition 1 EFI partition - System - system that contains the NTLDR, HAL, Boot.txt, and other files that are required to start the system, such as drivers.
  • Partition 2 - MSR - partition MSR (Microsoft Reserved) that reserves a space on each hard drive for subsequent use by operating system software.
  • Partition 3 - primary - where Windows will be installed to.

    It is imperative that these 3 partitions remain in the exact order as they are

  That's all.

• Tecra M7 DVD: CD/DVD RAM drive does not work since the installation of Vista

  I did a clean install on my new Vista Ready M7. He had XP tablet in a first time, and the DVD player worked fine. In fact I used to install Vista (Home Premium).

  Now it doesn't work at all. It runs but does not read. Device Manager tells me impossible to start the device. Tried to update driver and he told me that he has the most uptodate pilot.

  Downloaded all the drivers from the Download Center of Tosh for upgrade of Vista of M7 (who got bluetooth, rotation etc. function properly the screen). But none of the downloads seems to be a driver for the DVD - Ram drive. He cannot find a driver anywhere else (including the Panasonic site).
  DVD player is Mat * a DVD - RAM UJ - 841 s

  Any suggestions?

  Hello

  On the Toshiba driver page, you can find the DLA for Tecra m7.
  Have you tried to install the XP driver DVD-RAM since the Toshiba page on the Vista operating system?

  Maybe it'll market

  But listening the CD/DVD drive uses the current Microsoft drivers that are included in Vista or XP.
  This is why an additional driver should not be necessary!

  An additional proposal;
  Remove the drive from the Device Manager CD/DVD and restart the laptop.
  After restarting again the OS should reinstall the drive and renew the software.

  Another tip:
  -Launch the registry
  -Choose the registry key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -In the right pane, click UpperFilters and LowerFilters, and then click on remove.
  -Reboot the laptop

• 4500 wireless: HP Solutions Center does not work since the upgrade to windows 10

  Hello

  My solution Center no longer works since I've upgraded to windows 10.

  Thank you

  Welcome to the HP community @DJHar,

  I understand that the Solution Center Software no longer works since you have upgraded to Windows 10, and I wanted to reach out for help. I would say firstly under the HP printer install wizard for Windows, that will find the drivers and software for your Officejet 4500 Wireless and install the correct software for Windows 10. Try the software for access later, and it should work.

  Let me know the results!

  Good luck

• Hearing 5.5 does not work since the upgrade to Windows 10?

  Hearing of the charges u, and I need to work with the files load in the software too. But nothing else happens. It won't play, won't record, regardless of whether the file is passed to in the menu, a sequence of keys, or a button on the screen. I have re-installed the software: no change. I have uninstalled and reinstalled again: nothing.

  Help, please?

  Elegantly yours.

  Tom Fitzmorris

  [(informations personnelles par Email signatures et deles de renseignements personnels)-mod]

  I heard about 5.5 on Windows 10.

  The first thing I would check is that Windows and hearing are "accepting" on the audio interface (and pilots) to use and also things like rates and few sample depth.  We had a poster with CS6 yesterday who had a similar problem and going through and manually configure the interface card / audio itself sorted.  The upgrade to win 10 to reset everything, probably for video playback, at the expense of the audio recording.

  Your do not mention that you use as a sound card, so I can't be precise in what to do, but the first thing I would do is go to Windows Audio Control Panel and make sure that any sound card that you want to use is visible and selected by default for the recording and playback...  While in the audio control, also access advanced settings (recording and playback and make sure that the depth of rate and little run the settings you want.)

  If you have a card with its own software external sound, go there and set it up to match Windows.

  Finally, go to Edit/Preferences/Audio Hardware and make sure that the right device is set for recording and playback on the drop down menus.  Also, make sure that the "device class" is set to the right kind of driver for the audio interface you.  This will probably be Ms for an integrated sound card or to an external ASIO - but you'll have to work it yourself.  Apply all these changes, so I hope that things work out.

  If this is not the case, let us know the details of your system and the audio interface and maybe we can come up with other ideas.