logs not found

Similar Questions

• RMAN-06059: expected archived log not found

  DB version: 11.1.0.7
  Operating system: Solaris 10
  
  Our cron job RMAN has met the following error.
  -First save attempt (complete bkp more archive log) done by connecting to the catalog

  Starting backup at 14-MAR-12
  current log archived
  released channel: ch00
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of backup plus archivelog command at 03/14/2012 08:09:58
  RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
  ORA-19625: error identifying file +PQWSP_ARCH01/pqwsp_arch/pqwsp_26530_1_764525298.arc
  ORA-17503: ksfdopn:2 Failed to open file +PQWSP_ARCH01/pqwsp_arch/pqwsp_26530_1_764525298.arc
  ORA-15173: entry 'pqwsp_26530_1_764525298.arc' does not exist in directory 'pqwsp_arch'

  Because I didn't share RMAN catalog schema password, I used the control as a catalog file and run the CROSSCHECK command.
  
  -Use the control as a catalog file

  $ rman target /
  
  Recovery Manager: Release 11.1.0.7.0 - Production on Wed Mar 14 09:45:59 2012
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  connected to target database: PQWSP (DBID=1638594930)
  
  RMAN> crosscheck archivelog all;
  
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=429 instance=pqwsp1 device type=DISK
  validation succeeded for archived log
  archived log file name=+PQWSP_ARCH01/pqwsp_arch/pqwsp_26563_1_764525298.arc RECID=19019 STAMP=777888587
  validation succeeded for archived log
  archived log file name=+PQWSP_ARCH01/pqwsp_arch/pqwsp_26564_1_764525298.arc RECID=19022 STAMP=777890270
  validation succeeded for archived log
  .
  .
  .
  .
  .
  
  Crosschecked 14 objects

  Cannot find objects expired in the output above. I had * "validation succeeded" * message to arch all newspapers.
  
  So I ran a

  BACKUP ARCHIVELOG ALL DELETE ALL INPUT;

  and this backup was successful.
  
  No idea why the first attempt failed when there were not all logs archived expired? If I run the command of OVERLAP by connecting to the catalog, I could find out of date newspapers?

  No idea why the first attempt failed when there were not all logs archived expired?
  this case is not releated archivelog expired, however it seems the requested archivelog 26530 isn't available on destinationas, that it can be removed manually or another taking backup operation the backup and deleted if the execution of the whole.

  crosscheck updated detail that its not available for backup... Check the output of you overlap cmd to 26530 archivelog.

  Thank you
  Tylay Singh

• Log not found

  We use authentication for the external table. Are not filtering of data by user. All records are displayed for all users. I am trying to display 'view Log' session Management, but I am getting error no paper found. Please can you help me, how can I view log file. Should I change something for the authentication of the external table?
  
  My second question is why aren't data filtering? I created all the joins between the tables S & V with the fact table. Could you please help on this issue too?
  I thank very you much for your time.

  Hi user,

  You need to set the recording level (variable LOGLEVEL) an appropriate value in order to get logs to be generated. In this article, Vincent shows how to increase the level registration and applications for standard users to RPD.

  In your case, since you are using the external table and not internal RPD users, you want to set the LOGLEVEL variable in a block of initialization of the RPD or at the State level. Nico has an article about how do to the level of demand. See his article here.

  For the level of the RPD, simply create a new block of initialization and the whole to a query is a source. Use the "SELECT 7 FROM DUAL" query that the query to initialize and set the LOGLEVEL variable. 7 is the highest level of logging. Save the RPD, restart services and each user must generate a log file.

  Good luck!

  -Joe

• try to uninstall programs, "Journal of instalation not found".

  I would be very gratful if someone could help me... once again please! Yesterday, after the acquisition of the programe of thugs 'CYBERSECURITY' I came here asking if someone could help me to get rid of it, thanks to those who responded, unbelivably, I managed to get rid of it myself with system restore in safe mode (it may work for other people, I answered some telling them to try this) that I never thought would work , but, touch wood, looks ok now Ive cleaned it. I just have a problem now try to uninstall the programs that I got rid of the day, I acquired of cybersecurity. I guess it's because the restore point, I gave him too much. I want to get rid of these again, but every time I try to unistal them, he said: (Ghost Installer) "Not found Setup log" happens then "this program might not be properly uninstalled" it gives the choice 'Uninstall using recommended settings' or 'this program uninstalled corectly' when I click to uninstall using recommended, then goes back to "instalation log not found" again. I don't know that there is a very simple answer to that, unfortunately, I don't know much, just a little more before the program of thugs! would be very gratful for help.

  Thank you

  Sarah

  Hello

  If possible and not malware try to reinstall the program, so you can uninstall them.

  For all THE tools here when possible - download - RECORD - go where you put them - click on - RUN AS ADMIN
  (do not use RUN AS ADMIN for the program that you just want to load and then uninstall unless it takes and it is
  not malware).

  A great tool to use is Revo

  Revo Unintaller - free
  http://www.revouninstaller.com/

  ------------------------------------

  In your cleaning have you run SFC/scannow, and then checkdisk?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ================================

  I would also like to do the following:

  Spotlight utility Windows Installer CleanUp Utility
  http://TechNet.Microsoft.com/en-us/magazine/2008.08.UtilitySpotlight.aspx

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Vista service pack 2 error code 80092004__run updated stand-alone responsible package__down ServicePack 2__run stand-alone service pack 2___ error code not found crypt_E_ (0 x 80092004) __could the log file is not open

  Service pack 2 80092004 Vista error code
  Run the stand-alone update package
  Load service pack 2
  run stand-alone service pack 2
  error code not found crypt_E_ (0 x 80092004)
  could not open log file

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Log in as root, esxcfg-firewall not found

  Hello

  I'm under esxi 4.1 on vmware workstation.

  using putty, ssh esxi host and logged in as root.

  Esxcfg-firewall command I tried, but it has given below

  "- ashes: esxcfg-firewall: not found".

  I have read the forum and found cases where the su - correction of the problem.

  but I'm already root, but can't excute esxcfg-firewall.

  even tried-su, but still command not found.

  strange thing is I can get orders of work below:

  esxcfg-nics, esxcfg-vswitch, esxcfg-road esxcfg-vmknic

  but the two commands below are not found:

  esxcfg-firewall, esxcfg-vswif

  Am I missing some parameters?

  Any input will be greatly appreciated.

  Thank you

  Hello

  On ESXi command esxcfg-firewall does not exist, fundamentally ESXi has no firewall like ESX, you can enable or disable some services via vSphere client or ESXi console.

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• Since v25 when I try to log in my account of Merrill Lynch, I get not found user IDS. Works well iE and Chrome

  When I try to access my account, as I recover a message not found user ID. I have 1) deleted all cookies, cache, history etc... (2) run as Administrator 3) renamed cookies-sprite 4) restarted

  I am currently using Windows 7 Home Premium SP1, Firefox 26

  I was going to take a look at the form, but I was surprised to find that there are many pages of different connection: http://www.ml.com/index.asp?id=7695_14227_14228.

  When I enter a username of random test here: https://www.mymerrill.com/ml/home.aspx?site=mymerrill

  I get the expected error: "user not found. Click here to retrieve your user code. "The link here goes to ml.com instead of being on the same site.

  If I'm looking for the thisisatest username then I get the page to enter a password, which is also on ml.com. So there is an interaction between the areas here which may be covered by restrictions on third party cookies or external scripts.

• How to uninstall games when they say not found Setup log

  went to uninstall games, but notice happens «Journal of Installation not found»  I can't get rid of them!  Help!

  Hi glorianorman

  
  1. what operating system is installed on the computer?

  2. What games you try to uninstall?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  
  Method 1:

  You can try unsintalling games from the control panel using Add/Remove Programs option. Refer to the below help links -.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  http://Windows.Microsoft.com/en-us/Windows7/uninstalling-programs-frequently-asked-questions

  
  Method 2:

  Also, it allows sometimes to reinstall the program and uninstall, then in the Panel using Add/Remove Programs option.

   

  I hope this helps.

• When I log into my account, the title of the next view rises, wlstartup.exe - Entry Point not found

  The full review is, the procedure entry point? GetHeight@CRMImage@@QBEHXZ cound not found in the library of dynamic links UXCore.dll.

  When we click OK, it shows that Windows Live Essentials Beta has stopped working. He then suggests the solution line check, I did. The recommended solution is to download Windows Vista Service Pack 1, 32-bit, once I did that, but the problem always not will disappear.

  Hello Mick Smith,

  Thank you for your message.  Click HERE and check the thread of Mechell P.  Please let us know if it did or did not help to solve your problem.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• In XP get error log that csrss.exe is not found, what is it?

  The csrss.exe file is needed? I get an error when opening session that this file is not found.

  Hello

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/

  How to back up and restore the registry in Windows
  

  You can refer to the following steps:

  * Click Start > run

  * Type regedit and press to enter.

  * Search HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  * Right-click on winlogon, and select export.

  * Save the reg file to a location incase you must cancel the following changes.

  * In winlogin search shell and double-click it.

  * Change the value of "Explorer.exe C:\WINDOWS\System32\csrss.exe" just "Explorer.exe".

  * Save changes and disconnect and reconnect.

  * Restart the computer.

• I am running Windows XP Home Edition. Start once I log in, a RUNDLL box appears, IIFCYW. DLL is not found.

  Hi all.

  I am running Windows XP Home Edition. To start once I connect to a box of RUNDLL appears, read "iifcyw.dll". "The specified module is not found. with the box 'OK' on the bottom. Its a problem because it makes my mouse and keyboard stutter. Made a little ongoing enforcement programs stutter as well. Seems a little to rob me of PC performance.

  Can someone help me?

  Thank you

  Hi all.

  I am running Windows XP Home Edition. To start once I connect to a box of RUNDLL appears, read "iifcyw.dll". "The specified module is not found. with the box 'OK' on the bottom. Its a problem because it makes my mouse and keyboard stutter. Made a little ongoing enforcement programs stutter as well. Seems a little to rob me of PC performance.

  Can someone help me?

  Thank you

  It's probably a left over the malware registry entry. Follow the instructions below carefully.

  Restart the computer in safe mode with network. Click the second link below and download Malwarebytes. Update Malwarebytes and perform a full scan. Choose to quarantine found nothing. Once complete, click the third link below and download Superantispyware Portable. Run a full scan quarantined found anything yet. Restart your computer in normal mode and perform a quick scan with Malwarebytes.

  How to start in safe mode

  Malwarebytes

  Superantispy-portable  < is="" a="" portable="" scanner="" meaning="" it="" does="" not="" need="" to="" be="" updated="" and="" does="" not="">

• Why I get 'profile not found', when I log on my computer?

  When I connect to my computer windows xp sp3 support office and a massage appear (profile not found). The I clik OK and go to work.

  Check this box:

  http://support.Microsoft.com/kb/947242

  Create a new see user account n

• The message"we're sorry, the requested page is not found" after logging in to microsoft to download windows 7 pro windows 10

  Original title: windows 10

  We're sorry, the requested page is not found.

  This is what I get after connection on microsoft to download windows 10 from windows 7 pro

  Can a ca help me?

  Thank you

  Stefano

  Assuming that Win7 64 bit with Internet Explore 11 (IE11) installed...

  We will need to "dig deeper" here. Please answer each of the following [admittedly tedious] diagnostic questions in a list numbered corresponding type in your very next answer, preferably without quote my post:

  1. when (date approximately) did you buy the computer?

  1B. who built the computer (for example, Dell;) HP; Sony; Lenovo)?

  1 c. has Win7 64-bit was preinstalled on the computer when you bought it, did you do a clean install of Win7, or have you go to level one (for example, Vista;) Windows XP computer) to Win7?

  1 d. Windows 10 has never been installed?

  1. you already have a repair installation or a clean installation of Windows 7?

  2. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires? What (other than Defender) anti-spyware applications are installed? What third-party firewall (if applicable)?

  3 a Norton or McAfee application ALREADY installed on the computer as you bought?

  4. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer When you bought it? (No matter if you have never used or activated).

  5a. is KB3154070, KB3156013, KB3156016, KB3156019, KB3153171, KB3153199, KB3156017, or KB3142024 listed in installed updates (not update history)? [1]

  5b. How about you, KB3150513, KB3138612, KB3123862, KB3035583, KB2952664 or KB2990214?

  6 assuming that Java is installed => is 91 update Java Version 8 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://java.com/en/download/uninstallapplet.jsp [2]

  • Java Update: the Patch or pitch it
    http://krebsonsecurity.com/2014/07/Java-Update-patch-it-or-pitch-it/
  • It's time to disable/uninstall Java?
    http://securitygarden.blogspot.com/2013/01/Java-zero-day-again-time-to.html

  7 is Adobe Flash Player v21.0.0.242 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://www.adobe.com/software/flash/about/

  

  8. when (exact date) was Internet Explorer 11 is installed according to the installed updates?

  8B. what Update Version & KB number are displayed in the second line of text using IE11 | [Alt + H + A] tab. for example, Updated Version: 11.0.99 (KB1231231) ?

  8 ch. is Firefox version 47 (or higher) or Google Chrome version 51.0.2704.84 (or higher) or another alternative browser installed?

  9. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Comprehensive care system; Glary Utilities; Registry Booster; McAfee QuickClean; Own fast AVG; AVG PC TuneUp; Norton Registry Cleaner; Norton PC tune-up; PCTools optimizer; SpeedUpMyPC; FixMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. Registry Cleaner CCleaner component)?

  ==============================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)
  [2] no need to install Java if it isn't already installed.

• A snapshot could not be created. Check the event logs application VSS amd SPP for more information. Details: the specified object was not found.

  I get this message to 5 seconds after attempting to back up using a Seagate external hard drive. The drive has plenty of space (1 TB) and is formatted NTFS. System recognizes no problem when I Plug and I can move files to and from it no problem otherwise.

  No other thread does deal directly with this version of the problem (with the object "not found"). Any help or ideas are appreciated.

  Hello

  This occurs generally when the Volume Shadow Copy service and SPP services are not started. We will analyze and identify the cause of the problem.

  I suggest you perform the steps mentioned by "Diana D replied October 23, 2010" to a similar discussion.

  Reference:

  snapshot could not be created Details: the specified object was not found.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/shadow-copy-could-not-be-created-details-the/a55057f8-67ed-4FA3-b61e-15f8904aaba1

  Note: Make sure you put in road security software and Windows Firewall later once you are finished with the test.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  See also:

  Back up and restore frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Hope this information helps. Response with status so that we can help you.

• When I select print for a message preview mode, I get an error "the selected printer is not found." I can print the message, but I can't preview the output. I have

  I found that someone else has had this problem, but solution of Matt necessary use of the configuration editor. I followed the instructions, but by clicking on the Advanced tab, there was no Config Editor tab in order to execute the next step of the solution. BTW, I look in the console error log and see what: couldn't read the chrome manifest ' queue: / / / C:/Program % program % 20Thunderbird 20(x86) /Mozilla % 20Files / chrome.manifest'. The error itself is small box with Print Preview error as the label and The selected printer is not found as the contents of the box. Any help much appreciated.

  You look under Tools | Options | Advanced | General? In the main menu, which is the traditional one that spans the top of Thunderbird?