lonely Spider says missing system memory does not open

Similar Questions

• System Restore does not open

  had problems with windows lock up
  discovered it was AVG 2011 Free running scans a updates, eventhough I set them to manual
  have you an uninstall was not well said there where missing files
  Open System Restore went back 8 weeks to make sure I covered everything
  He restored the pc so I could get out on the internet
  an uninstall program third to clean avg
  installed windows security
  did a scan no problem, ran spybot without problems
  tried to run other programs that Win Media Player does not open, System Restore will not open now.
  but Procexp .exe indicates that the restore open file, IE8 opens a not defined get java script correctly, a pop-up site blocked blocking are set correctly I am now on firefox, it sews and work on all sites
  think that avg might have done a job on the pc found four (4) other lines that said avg2011 could start he's trying to make bad updates
  Thanks for any help
  jsaw

  Hello

  · What is the number and the model of the computer?

  · What is the full error message and the error code that you receive when you try to open windows media, restores Player system and internet explorer?

  · What is the service pack installed on the computer?

  1 run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  2. for the problem with internet explorer, try them steps listed in the link below: how to resolve script errors in Internet Explorer on Windows computers: http://support.microsoft.com/kb/308260

  You can also follow the steps in the link below: Troubleshooting for problems when you try to use the System Restore tool in Windows XP: http://support.microsoft.com/kb/302796

• Why my system preferences does not open?

  

  Hey guys! I posted my system specs before you start.

  Anywho, after a fresh clean install of OSX El Capitan (because my iMac crashed recently and I had to wipe my hard drive completely... Yes, there was a lot of tears), like, literally yesterday, I can't open my system preferences. As I click on the sign of the Apple at the top left, then go to System Preferences...

  This is what happens...

  The small system preferences icon bounces just bounces... bounce... and then... nothing... to frikkin' ever. I have to force it to quit. I try again and again, same thing. So, I go in Applications run in 32-bit mode, try again and guess what? Celestial tracks. No problem... UNTIL I try to choose an option, any option, and he ALWAYS tells me it need to restart System preferences to open whatever it is, then proceeds to give me spinwheel thing... and then crashes and I have to force quit... again.

  So, I suppose, in 64-bit and 32-bit, it does not work properly. And Yes, for the love of God, I already tried the delete your whole com.apple.systempreferences.plist, but also the other things that other forums will tell you to remove in system preferences.

  Note: another issue, I felt at the same time, it's that for the life of me I can't Time Machine to notice my external hard drive. I tried updating all the disks on my external hard drive, repair permissions, first aid, USB 3.0 update, power cycling, rebooting with alt + cmmnd + P + R, single-user mode, fcsk, safe mode, most first aid,... like, what the hell is happening? Laughing out loud

  -

  Drew

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• My profile is missing for Firefox does not open. How can I reset it then?

  I've been using Firefox since one some time walking, but used a different browser as my main. Now that this browser is obsolete and there is no update available, I wanted to switch to Firefox permanently. Given that all my favorites are only updated on my old browser, I thought it would be much easier, simply uninstall and reinstall Firefox and automatically carried over to my favorites (since that first made some time ago). While looking up how to install it, I came across something that says that the bookmarks are stored in a 'profile' that had to be deleted to be reset. I followed the instructions to remove my profile, then uninstalled and reinstalled Firefox.

  NOW, I'm going to open my newly installed Firefox and a window pops up that says: "cannot load your Firefox profile. It may be missing or inaccessible. »... Well, I wanted to start over completely, so of course I don't have a profile more. But my only option now is to click on this window, and Firefox disappears. No means to access anything whatsoever on Firefox, no options, no nothing so all of the so-called 'solutions' that I've seen (IE: reset the profile...) "I can't do that either!) It is impossible for me to do.

  All I wanted to do was end of beginning completely with Firefox which seemed to be a very simple solution and has now turned into a chore and an unusable browser. How can I reset or create a new profile without being IN Firefox to do? Deleted my profile an error? If so, your help page is very misleading!

  Someone please help. I really don't want to use a DIFFERENT browser.

  Thank you!!

  A possible/probable cause is a problem with the file profiles.ini and the profile marked as the default value = 1 in this file is no longer present on the hard drive.

  • Windows: %AppData%\Mozilla\Firefox\
    C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • Linux: ~/.mozilla/firefox/
  • Mac: ~/Library/Application Support/Firefox /.

  You can use one of them to make the Creation/use of a new default profile for Firefox:

  • Remove the profiles.ini file to force Firefox to create a new default profile
  • Use the Profile Manager to create a new profile
  • Use "Choose a folder" when you create a new profile to select the location of a lost profile and recover this profile
  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• For Vista System Restore does not open.

  I think that my computer is fishy, so to be safe, I want to give it a few days ago. But when I went to do a restore of the system, the window will not appear. The process is running in the Task Manager, but not visible in my window.

  I think that my computer is fishy, so to be safe, I want to give it a few days ago. But when I went to do a restore of the system, the window will not appear. The process is running in the Task Manager, but not visible in my window.

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon.

  Mick Murphy - Microsoft partner

• recovery system does not open

  When I click on the recovery of the system, it does not open.  I am running windows xp professional 2002.  I tried to update, but it freezes when trying to install the program active x.  I tried to run it, rundll32.exe advpack.dll, LaunchINFSection % Windir%\Inf\sr.inf too, but I don't have the disk to install xp service Pack 3.  I think it was a downloaded update so no disc.  If at this point, there is no way for me to do a restore of the system if necessary and no way to get the updates even if they are set to auto.  I also scanned for a virus that found nothing.

  Hear you the system restore will not launch at all or it does not start, and you see just a blank white screen where the calendar should it be?

  It is not difficult to reinstall the system restore (not reinstalled XP - only the part of SR), but to see how this other idea it works.   Reinstall SR will destroy all your old Restore Points and leave you with an another fee.

  It is easy to reinstall the system restore.  Here's how:

  Assuming that your XP is installed on drive C of your computer:

  As you go through the reinstallation of the RS, the resettlement will be asked to locate certain files as you go along and ask your XP installation CD.

  If you do not have a genuine XP bootable installation CD, you can change the path where Setup looks for files one at a time, because they are needed.  More on that later.

  Navigate to c:\windows\inf, and right click on the following file:

  SR.inf

  Choose Install

  If you can not see the sr.inf file, set up your system to show hidden files and show file extensions.

  Click on tools, Options, view and turn on "Show the hidden files and folders" and uncheck "Hide extensions for known file types", then you should be able to see the file c:\windows\inf\sr.inf.

  Installation can request files from the c:\windows\inf\386 folder.  It would be your installation CD bootable XP genuine if you have one and the Service Pack installed on your system must be the same as the CD that you will use.

  You don't need absolutely a CD to do the reinstall SR because files must already be on your system somewhere if SR was working before.

  If you are prompted for a file, and you can't find it where I suggest in my example below (it works on my system), you need to search your hard drive and find where the files on your system.

  If the request to a file and you don't know where it is, let waiting for installation and click Start, search, then search for the requested file and find it on your system.  If SR has already worked before, the file is already on your system somewhere.

  Search finds the requested file, go back to the installation and specify the path where you found the file requested and click OK.  Installation can request several files along the way, but you can find them all.

  If you still can't find the files, let us know what is the file you need and someone can download on his SkyDrive and you can download it.

  Here's how my system works when I reinstall SR when I pretend that I don't have a genuine XP bootable installation CD:

  When you are asked:

  SR.sys

  Point the install in c:\windows\system32\drivers

  When you are asked:

  c:\windows\system32\srclient.dll

  Point install it in c:\windows\system32

  When you are asked:

  Filelist. XML

  Point of installation at c:\windows\system32\restore (or c:\windows\ServicePackFiles\i386)

  If asked:

  xrstrui.exe

  Point installation c:\windows\system32\restore

  When you are asked:

  srframe. MMF

  Point installation c:\windows\system32\dllcache (c:\windows\system32\restore)

  Once installation is complete, you will receive a message that you must restart your computer.

  Restart your computer and look at your schedule of SR.  You should have a new point system control in your calendar.

  Now is the right time to test your system restore process, from one end to the other.

  The day that you think you have need of system restore is not the day, namely that it does not.

  Reboot your system and without anything running (no browser, Outlook, etc. - just the basics), manually create a new Restore Point, restart your system and see if you are able to restore your system to the Restore Point, you just do.

• my systems page will not open error message "the page failed to load".

  Original title: my systems page does not open after going into the control panel and then system and maintenance

  my systems page opens not after going under maintenance then system and Control Panel. This shows simply "the page failed to load". I need to access this page to share files from one computer to the other. can anyone help?

  Hi Sarah Brown,.

  (1) remember you to make changes prior to this problem?

  (2) what is the complete error message you receive?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• system recovery does not reach 50%, presario CO61-312SA

  Presario CO ^!-312SA does not start. Click f11 to start recovery of the system that does not reach 50%. I understand that the wireless switch should be during the restore process, the wireless button will be red or blue? If it should be blue, then I can't go blue... If one red so... it is!

  I bought Windows 7 drives home premium but have no idea how do I reinstall my OS... There are 2 disks for 32-bit and 64-bit, but I can't read the sticker on my laptop to see what I need to use a disc.

  Any information you can give me on any of my questions today will be very appreciated, thank you x

  Hello

  You have a few options in my opinion please find the steps below may help you solve the problem.

  (1) Please run the hard drive & memory test and check if any part fails, you will have to replace the part. If both the test passes you can call the HP technical support to order the recovery again disc.

  Test a hard drive by using the Built in Self Test

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

  
  

• Problems with my sound doesn't play not even though the settings say that the audio does not work properly

  recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work.  I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found.  So I restored by computer back to before I left on vacation, but still no sound.  No pop up with the dll is not found though.  I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance.  said the task of event 20 116.  I have an ACER one with windows. the computer has HDMI dolby and realtek.

  -

  -

   

    20

    0

    4

    116

    0

    0 x 800000000000000

   

    3490

   

   

    Microsoft-Windows-Audio/PlaybackManager

    LorrainesPC

   

   

  -

    3

    48000

    fake

   

   

  Judy Hello,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 2

  Method 2:

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• For 7.0, get popup saying "cannot load XRE extensions." Firefox does not open.

  The Win 7 system, loaded the new version 7.0 of Firefox. When you try to open Firefox, I get a popup to say that 'could not load XRE functions." Firefox does not open.

  I had the same problem. I am running Zone Alarm. Am entered and changed the setting in the 'Protected Internet' part, off the virtualization of the browser. And without popups more of XUL Runner. Firefox opens fine.

• Why can't search contacts on my profile bar, the search I want to say that if I need to find contacts I put the name in the search bar on my profile but still they say that this contact does not exist

  Why can not search for contacts on my profile bar, the search I want to say that if I need to find contacts I put the name in the search bar on my profile but still they say that this contact does not exist why this before it was ok

  original title: the search for contacts

  Hi Sam,

  First select the operating system you are using, or maybe give an indication on the operating system installed on your computer. While other members of the community can help you with this problem.

  You use Outlook?

  Are you referring to outlook contacts?

  Reference: http://support.microsoft.com/kb/555375

• 'System.DateTime' does not contain a definition for 'HasValue '.

  I develop a lightswitch application. But me make mistakes trying to build the application:
  using System;
  using System.Collections.Generic;
  using System.Linq;
  using System.Text;
  using Microsoft.LightSwitch;
  namespace application
  {

  partial public class Section
  {
         
  SectionDisplay_Compute partial Sub (Ref DateTime result)
  {

  If ((this. Course! (= null) & (StartDate! = null) & (teacher! = null))
  {

  Assign the result to the value of the desired field

  result = String.Format ("{0} ({1}) [{2} - {3}]", Course.CourseName, Teacher.UserName, StartDate.ToShortDateString (), ((StopDate.HasValue)? ") StopDate.Value.ToShortDateString (): "'));

  }

  }
  }
  }
  This is the code. Get the following errors

  Error 1 'System.DateTime' does not contain a definition for 'HasValue' and no extension method 'HasValue' accepting a first argument of type 'System.DateTime' could be found (missing are you a using directive or an assembly reference?)
  Error 2 'System.DateTime' does not contain a definition of 'Value' and no extension method 'Value' accepting a first argument of type 'System.DateTime' could be found (missing are you a using directive or an assembly reference?)
  anyone help me please in this ASAP?

  Hello

  What operating system is installed on the computer?

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  Hope this information helps.

• Envy of HP dv7-7332ea - System Restore does not work on windows 8

  Hey there,

  I recently bought this machine about a month ago. I used the Windows 8 System Restore feature to restore my pc to a previous state.

  However, after running it, I got a message saying: it failed and to ensure my anti virus is disabled. Accordingly, I have disabled Norton and tried again but it still does not work.

  Previously, the only problem I had with the pc was that he locked himself completely and therefore I turned off the machine that I have been unable to close.

  When I rebooted, HP Support Assistant could not run and so I uninstalled and then reinstalled from website theHP. It is now resolved. The thing is I'm a little scared that something is wrong with the machine that is the reason why I think that the system restore does not work.

  I'm a newbie on the computers here. Could you please give me some advice to diagnose if there is nothing wrong with my machine and fix the system restore?

  See you soon,.

  Damon

  Hi Damon,

  Norton is a component called 'Tamper Protection' that should be disabled before a system restore can be performed - for more details on this topic, see the following link.

  Disable self-protection.

  Kind regards

  DP - K

• Computer does not open a floppy disk. He continues to say that they need to get in shape

  my machine does not open a floppy disk.  He continues to say that they need to be formatted (even brand new ones that really don't need). so I told him to get in shape. within 30-45 seconds, a screen appears and tells me that the disk cannot be formatted.  There is no help menu or solution for this that I can find anywhere. I run Win XP Home Edition with Service Pack 3. the format screen shows my NTFS file system and the disk is listed in RAW format, but there is no way to change this. Help!  Lots of info on those records that must be transferred to a more modern storage unit.

  Try to get data from old floppy disks can be a nightmare.  For starters, the magnetic media is not particularly stable and the disk may simply have deteriorated.

  More likely, however, that you use in the problem of the "media descriptor block.

  See http://support.microsoft.com/default.aspx?scid=kb;en-us;309623&Product=winxp and http://support.microsoft.com/kb/140060/en-%20us
  There seems to be at least 3 solutions of workarounds for this problem:

  1. find a Win95 computer with a floppy drive and use it to read the data and transfer it to support more modern.

  2. use a disk sector editor as described in 140060 KB (which may or may not work, depending on whether your current disk can read the disc even if Windows allows it to try)

  3 install the driver of 'mode 3' discussed in the following thread: http://tinyurl.com/cs5a5rp (Yes, viaarena link still works).

• RealPlayer does not open due to missing file MSVCP90.dll

  I try to open realplayer and every time I get the same error message: Realplayer does not open due to missing file MSVCP90.dll. I tried to uninstall and reinstall a clean version and it's the same result every time! What I am doing wrong? How can I solve this problem? I have a laptop HP 1030NR which uses xp edition sp3 family. Can anyone offer any suggestions?

  The problem is that RealPlayer needs pieces of Visual Studio/Visual C++ libraries and that is not finding them on your system.  You do not have to install all this junk - just distribution (like MSVCP90.dll) files.

  You can look in Add/Remove programs and see what Microsoft Visual C++ redistributes you have installed right now (you can have none).  I installed them in 2005.  You may have none or more installed.

  I would like to download the latest Package Microsoft Visual C++ 2010 redistributable and install it from here:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=5555

  Reboot and see if RealPlayer is happy now.