Long delay in Sync Desktop Typekit

Similar Questions

• Keyboard a long delay by typing, made noise of rattling on speakers for each trait.

  I am running Windows XP on a Dell XPS 400 desktop computer. My keyboard developed a very long delay by combination of keys and would make a clicking sound on the speakers every time that a button is pressed. I used a Logitech wireless keyboard, so I changed the batteries, checked the range to the receiver, still nothing. I bought a wired keyboard USB (new Logitech), thinking that my wireless keyboard was bad. The wired keyboard does exactly the same thing. I checked keyboard settings and everything is set to the fastest setting. I have troubleshooted the device, and that it works correctly. I guess it's some kind of virus or malware, but I use McAfee and I didn't do anything. Also, I tried to do a system restore and I can get the system restore menu, but my mouse moves sporadically and the keys are unusable (it works fine everywhere else). The only command that I can navigate to with the keyboard is the RESTART button. So I can't run a system restore. Any ideas on what it is or how to get rid of?

  Hello Skico25,

  Thank you for your message.  This could be a driver problem.  Access the Web from Logitech site and download/install the latest driver for your device.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Want 5530: Long delays want printing 5530 All in One

  Our printer worked beautifully for a long time.  Now, he seems to have an unusual problem.

  When print us something, there is a long delay before the start of printing.  Once printing begins, sometimes to normal speed.  I have not measured the delay to see if it is still the same amount of time.  The delay is measured in minutes.  Often I'll print something and then go do something else until I hear the printer start printing.  During the time I am waiting, responses to the ping packets very good printer.  It is suitable to the management tools and access via its web page (as long as you do not ask to print something).  That tells me that it is not a network problem.  T.He network in our House is wireless.  We tried printing from several different computers to Windows 7, and the behavior is the same.

  The version of the firmware on the printer is ORL1CN1547AR.  Updated HP says that there are no newer drivers available for my system.  I find anywhere that my computer is going to give me the version number of the installed drivers.

  I tried power cycling the printer several times.  My laptop is restarted daily.

  No idea where to go from here?

  Hi ppeters86,

  Please try printing HP and the Scan doctor for me!

  What happens if you make a copy of the glass of the scanner of the printer? You get the same type of delay? Copy of Documents or Photos.

  In the meantime, we will try to disable IPv6 on the printer to ensure that IPv4 is used by your printer and your router on your network.

  • If your printer has a control panel with display, find the IPv6 settings in the advanced network configuration menu and set it Off orDisabled.

  • If your printer does not have a display, use the built-in webserver (EWS) to disable IPv6.

    1. From a computer on your network, type the IP address of your printer in the field URL of your Internet browser.

       NOTE:

       If the Web page appears empty, try another Internet browser.

    2. Click on the network or network tab and open the section or page corresponding to your type of network: wired or wireless.

    3. Select enable IPv4 only (or similar).

       Figure: Example of IPv4 configuration

       

    4. Click on apply and wait for changes are confirmed.

    5. Try to print again.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope hear from you soon!

• at check-in or "SkyDrive" downloading, I get: 1. fairly long delays, 2 Message of XL 'file conversion '. Why?

  File compatibility (?).

  Invariably, when registration to or from "SkyDrive" downloading, I get: 1. long delays, 2 Message of XL 'file conversion '. Why?

  GEO.

  Questions from SkyDrive belong here: http://windowslivehelp.com/product.aspx?productid=6

• My computer does not my router Linksys detect my internet connection. Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.

  connection and download Internet problems

  My computer does not my router Linksys detect my internet connection.  Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.  How to solve these problems?  so that my programs to work, I need these features.

  Hello

  1. you are using a wired or wireless?

  2 have you made any changes to the computer before the show?

  3. you receive an error message when you try to connect the Linksys router to the computer?

  4. what exactly happens when you try to update I Tunes?

  5. you receive an error message while updating I Tunes software?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can try the steps of troubleshooting provided in the links below and check if the problem persists.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• October 11, 2011 updated catchy so long delays for IE8 and Outlook Express

  After you install Microsoft Updates on October 11, 2011, after a system reboot, Internet explore 8 and Outlook Express experience long delays before starting. During this period, the Task Manager is also locked, so I don't see what process is at the origin of the problem.

  I narrowed down it to KB2564958 or KB2592799.

  I've uninstalled and reinstalled the KB2564958 and the KB2592799 and the problem disappeared.

• computer laptop w very long delay Vista at startup

  laptop with Vista starts hard disk only after long delay - 10 min or more.  Boots immediately on a bootable CD.  Hard disk is defined as startup option.  Food has no effect previous restoration has no effect.

  Hello

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  More troubleshooting:

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3 I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to get the orientation angle screen with 40 Hz stably without delay to sync?

  Goal: Get orientation angle screen at 40 Hz stably without delay for synchronization.

  Problem with two situations:

  1. When you use the bbutil_swap and navigator_event_get_orientation_angle (event) to get the orientation angle screen with other data such as acceleration sensors and gyroscope data, the sampling frequency will be low grade at 10 Hz randomly. The difference of synchronization will increase from 25 ms to 100 ms.

  2. when the screen orientation angle is collected in the following code to get the angle only, the difference in timing of sampling will be 1, 2 or 5 seconds at random.

  Question: How do I get the orientation angle screen with 40 Hz stably without delay to sync?

  or something wrong in my code?

  Mini code:

  public static void handleNavigatorEvent(bps_event_t *event) {}
  switch (bps_event_get_code (event)) {}
  case NAVIGATOR_ORIENTATION_CHECK:
  navigator_orientation_check_response (event, true); If not the line, no updates on the screen rotation.
  angle = navigator_event_get_orientation_angle (event);
  break;
  case NAVIGATOR_EXIT:
  stop = true;
  break;
  }
  }

  public static void handle_events() {}
  for(; ) {
  bps_event_t * event = NULL;
  If (BPS_SUCCESS! = bps_get_event (& event, 0)) {}
  fprintf (stderr, "bps_get_event failed\n");
  break;
  }
  If {(event)
  If (bps_event_get_domain (event) is {navigator_get_domain()})
  handleNavigatorEvent (event);
  }
  } else {}
  break;
  }
  pthread_create (& t1, NULL, (void *) & rawacceleration, NULL);
  }
  }

  int main (int argc, char * argv []) {}
  screen_create_context (& screen_cxt, 0);
  bps_initialize();

  {If (EXIT_SUCCESS! = {bbutil_init_egl (screen_cxt))}
  fprintf (stderr, "bbutil_init_egl failed\n");
  bbutil_terminate();
  screen_destroy_context (screen_cxt);
  return 0;
  }

  If (BPS_SUCCESS! = screen_request_events (screen_cxt)) {}
  fprintf (stderr, "screen_request_events failed\n");
  bbutil_terminate();
  screen_destroy_context (screen_cxt);
  return 0;
  }

  If (BPS_SUCCESS! = navigator_request_events (0)) {}
  fprintf (stderr, "navigator_request_events failed\n");
  bbutil_terminate();
  screen_destroy_context (screen_cxt);
  return 0;
  }

  Rawlog = fopen (rawfilename, "w"); Save the file in a specific path.
  fprintf (rawlog, "Absorption system, Angle\n");

  navigator_request_events (0);

  While (! shutdown) {}
  handle_events();
  bbutil_swap();
  }

  closeshutdown();

  return 0;
  }

  Thank you for your attention,

  Using SENSOR_TYPE_ORIENTATION of sensor_type_t , you should be able to get > 10 Hz.  Use sensor_set_rate() to get the slower delay to call sensor_info().  Make sure not to enable sensor_set_skip_duplicates().

  However get the orientation at the 40 Hz streaming will not make your application any repsonsive more.  The only way to make your app more would be to manage the orientation change in a short period of time.  This is the time when orientation changes (at the hardware level), to receive you and to deal with it.  It is usually a constraint system and there is not that you can do about it.  What you see using the code above is the same information repeated over and over; FACE_UP, FACE_UP, FACE_UP, which is not really useful.

• Home Premium: Long delay when you open a network share from a computer running the full edition. sometimes 0 x 80070035 path network not found

  Moved here...
  http://social.technet.microsoft.com/Forums/windows/en-US/66ba02d1-4c24-4646-8ebb-61f90482d4ef/home-premium-long-delay-when-opening-a-network-share-from-a-pc-running-ultimate-sometimes?forum=w7itpronetworking

  Hello

  Since you have tried all possible troubleshooting steps which were necessary for the issue to resolved and still the problem persists, I recommend you post the question in the Technet Forums.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.
  Windows 7 IT Pro category

• I can not longer right click my desktop or in a folder and get a new Forlder.

  I am running Windows 7 and I can not longer right click my desktop or in a folder and get a new Forlder.  My only option is a "new compressed folder (zip file)" the only thing I added to my computer (that I know) is Norton Internet Security.

  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf
   
   
  I do not think Norton is responsible for this, but it's quite the security program user-friendly Windows less you could choose and often causes other issues.
   
  
   
   

• really long delay before rendering starts?

  I have this ongoing problem (CC2014) where there is a long delay before rendering starts. Nothing fancy or heavy, no effect, MacPro/Yosemite/64 GB of ram, made to the internal SSD flash drive. Sometimes I see a 2, 3, 4, 5 minute delay before construction starts, then my comps short and simple, restore in seconds. Just AE text, shape layers and files placed. No business network, no other applications running.

  Any ideas?

  Mike

  If you use multiprocessing, turn it off & see what happens.  If the time-out period goes away, you may need to reassign your processors & memory for multiprocessing in the AE preferences.

  And it never hurts to purge the memory & cache before a final.

• Problem with the listening Service: Long delay beginning listener, intermittent connections

  I have problems to connect to my Oracle database.  I don't know what was the cause, but now when I connect to a database that has been working well for the past two years, I usually get an ORA-12541 error.

  I run lsnrctl status on the server and get a prinout like this:

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dqaswn02) (PORT = 1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Windows 64-bit error: 61: unknown error
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Windows 64-bit error: 2: no such file or directory

  I also tried to manually stop the service through services.msc, then by restarting via lsnrctl start, but when I do this I get a very long delay (10 + minutes) before he comes back with something like:

  TNS-01153: failed to process the string: 0i ≈ ♥
  

  I'm quite lost as to what is wrong.  I've been messing around with listener.ora, but I don't see anything difficult in there.  Here's a copy:

  listener.ora # Network Configuration file: E:\app\myc0714\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = E:\app\myc0714\product\11.2.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:E:\app\myc0714\product\11.2.0\dbhome_1\BIN\OraClr11.dll")
  )
  )

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = dqaswn02) (PORT = 1521))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  )

  # ADR_BASE_LISTENER = E:\app\myc0714
  LOG_FILE_LISTENER = LISTEN PORT
  TRACE_LEVEL_LISTENER = SUPPORT
  TRACE_FILE_LISTENER = LISTEN PORT

  A few times during that time, I was able to connect to the server, via sqlplus, however, it took 10 minutes before the connection is online.  Once I'm connected, I can ask my paintings as expected, but I need an application to connect.

  If anyone has any ideas on what could be the problem, please let me know.
  

  In fact, there was another thing, I changed when I finally got it works, although I don't know if it was related or not.  In my folder with my track logs, I had a huge (> 4 GB) listener.log file.  I deleted this file right before that I ran the command netsh command to reset and then restarted.  This file was also a bit special, because it had not been updated since around the time that I first encountered this problem.  It seems to be updated on a minute by minute basis, now that I've removed the old.  Is there a problem with this file becomes too big?  My drive was not out of space, but it is very curious that this stopped file update on the same day as when I started having the problem and now works properly again.  I wish I had noted the exact time until I deleted it.

  Link:

  Problem of Listener.log & #8211; large file | Obtained & #039; s Blog

• a long delay before video begins to play, remote only

  Hello

  My problem is that there is a long delay before that we can see the beginning of the video when connect us to the server from a long distance.

  When I connect from the same subnet, it's ok: less than 1 second.

  When I connect to a nearby location (2 km from here) the delay is 15 seconds

  When people connect to places very far away, it can be 2 minutes or sometimes the video does not play.

  y at - it a parameter to change this?

  Thanks for help.

  This Protocol is being negotiated in different places? RTMP, rtmpt, rtmpe, rtmps?

  I guess you have a proxy server or a firewall in place which prevents the default rtmp connection (using port 1935) put in place and the logical kicking of retry in and subsequently another protocol or port is finally working.

• long delay between opening session and desktop

  When I enter my username and password, it takes more than 5 minutes, until what I Office. When I click on my computer, I have more drive E that is a USB to HDD eternal.

  When I enter my username and password, it takes more than 5 minutes, until what I Office. When I click on my computer, I have more drive E that is a USB to HDD eternal.

  Jump around, even if you KNOW you've done something before - do it again as data...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• BlackBerry smartphones is no longer able to sync Curve 8520 to Outlook

  For some reason any when I try to sync my phone to outlook, I get the window saying: synchronization of data followed by another window saying please select one or more items to synchronize.  The contacts and calendar are selected and I have not changed anything, everything that I had to leave the country for a few days and now I'm back the synchronization no longer works.

  When I go to the tab of the Organizer, calendar and contacts are checked, but when I click Configure I get an error message, this could it be part of the problem?

  Thanks for any help I have tried various things (stop and restart the computer, the phone, trying to enter the Configuration menu, etc.) for the last hour, nothing helps.

  Completed by reinstalling BB Desktop Manager and who cleaned up the question...