Want 5530: Long delays want printing 5530 All in One

Similar Questions

• Want to 4500 all-in-One Printer: printer drivers 4500 craving for Mac

  I can't seem to get a printer driver installed for my computer MacBook running os x 10.7 (Lion OSX). I tried the printer with the printer installation, I used the CD provided, and each time I was told that Apple was the file that I needed to install the printer driver. I went to Apple, downloaded the file that has all the drivers of HP printer (I made sure that my printer was registered for that file) and tried again to install the driver for my printer. It didn't work and I tried several times through all the methods I could think. I also tried to install it by using the Bluetooth connection and a USB cable. Still no connection. HP told me that Apple has the pilot and Apple tells me that HP has the file I need. How can I get my new printer to work? It's extremely frustrating!

  Hey @norahsb,

  Welcome to the Forums of HP Support!

  I understand that you are having problems during the installation of your printer to All - in - One HP Envy 4500 on your computer Mac OS X 10.7. I would like to help you to solve this problem today. Can I please you follow the steps below.

  Step 1: Resetting the printing system:

  To begin, I will have you reset the printing system on your Mac because it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under"Reset printing in OS X Lion system." This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them in. don't add not your HP Envy in back at the moment.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens select the drop down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Reinstall your software and drivers:

  Finally, please click here to download the driver package for your printer. Once the site opens, select the download button at the top left. Once the download is complete, please follow the instructions on the screen to install your printer.
  

  Once your printer is properly installed, test your machine to ensure that all functions are working properly.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• HP ENVY 5530 All in One: what "Scan by means of the computer?"

  I use Windows 10, 64-bit and I have a wireless hp envy 5530 all in one printer on my network.

  I do not understand what "Scan to Computer" means... does that mean I can scan a web page and send it to my computer, it means scan a document and send it to my computer or that mean both?

  Thank you

  Dino

  Hello

  Thank you for using the HP Forums.

  Scan of the computer means "scan a document and send it to my computer.

  You will need to install the FULL features software and activate it before you can use.

  How to scan to computer

  Once you have installed the software:

  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)

  Scan to computer

  Hope that helps!

• Installation printer A920 all-in-one

  I just bought a used, refurbished OptiPlex 755 PC with Win 7 OS and am trying to install my all-in-One A920 printer. This is the printer that came with (my Dell Dimension 2400 series) desktop I bought about 7 years ago. I downloaded and installed (or so I thought) a Vista 64 bit driver I've read on the Dell website is supposed to be compatible with my Windows 7 64-bit OS. I plugged my printer and opens the file. I thought it was going to guide me through the process of setting up, but he did not. My computer recognized my printer, and he let me even in the all-in-one program. I was able to scan a document in color (but it wouldn't let me save it), I was unable to copy or print documents, and the "empty cartridge" box came up saying that black inkjet cartridges and color were empty; they are not empty because I recently replaced both cartridges. I miss any step, or not to do something in the right order? The printer does not give me a lick of problems on my Dell PC with Windows XP. I don't want to have to buy another printer, if possible, any help you can give me would be appreciated! Thank you! p.s. I have not loaded MS word on my new computer, so I wonder if this has nothing to do with the printer does not. (??)

  monksplay,

  The procedure is listed below. The OCR program, found on the disc from the printer, is required for scanning documents and fax.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Owners of printer inkjet all-in-one Dell A920 thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Rick

• Re - install the software for the printer C6280 all in one... get a "file not found" error message

  you need to reinstall the software for the printer c6280 all-in-one. Downloaded the last installation on HP web site package. During the installation process I get an error message... Unable to find user/appdata/local/temp/7z256315/setup/...setup/blocksysuser...

  the 7z256315 folder does not exist on the hard disk.

  I also have a message that it cannot find PS_A10_02_software.msi.

  Windows 7, C6280 printer all-in-one. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via the wireless to the router.

  I hope you can help

  Thank you

  Charlie

  Hi cberistain,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77039-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3645097 & sw_lang=.

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print and scan?

• HP psc 1210 printer v all-in-one

  I'm missing a driver for my hp psc 1210 printer v all-in-one.

  I can't print from my desktop pc to Windows 7 on my printer.

  Printer works very well to plug into the wall for printer - will make copies just fine.

  Computer added my default printer - that part is fine.

  When I try to print from the computer to the printer, I get a message saying the printer is waiting for 1 document waiting to print, but it will not be printed.

  I tried to unplug the USB cable and plug it into another USB port, but it does not work either.

  Tried the Printing Troubleshooter?
  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter
  If this does not help, try this procedure by Arthur Li [MSFT]:
  Clear printer spooler files and activate the Spooler Service
  =================================
  1. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.
  2. double-click on "Printer Spooler" in the Services list.
  3. click on stop, and then click OK.
  4. click on start, type "% WINDIR%\system32\spool\printers" in the search box and press ENTER, remove all files in this folder.
  5. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.
  6 double click on "Printer Spooler" in the Services list.
  7. click on start. In the Startup Type list, make sure that "Automatic" is selected and click OK.

• What should I buy to re - install my printer Dell all-in-One A960 Windows 8 after Windows XP?

  My printer Dell all-in-One (purchases. 2004) has stopped working.  When you try to use, sign popped up "print spooler service does not work? This has happened a month after that I switched to Windows 8.  Dell said there is no software for this printer be re-installed Windows 8 and suggested that I buy a different printer.

  I don't think that Dell should have the last word.  Any advice?  Can I buy drivers, other software?

  Thanks for your information.

  I suggest to try this:

  (1) unplug the printer from the power point

  (2) connect one end of the USB cable to the printer (if it is not already connected)

  (3) connect the other end to the machine using any free USB port

  (4) turn the printer by plugging the power plug

  (5) look at the screen to see if Windows indicates all compatible drivers

  If this does not work then try to look for Windows7 or even Windows Vista drivers and then install. However, make sure that these drivers are from the DELL website if possible)

  Good luck and hope it works.

• Want some 4500 all-in-one: how to print photos to urge 4500 using samsung notes 10.1 2014 edition

  I envy, printer all-in-one... and although I have printed letters successfully for some reason any it won't print from the photo! So, if ordinary letters is "an ok" why no photo?  Do I need something else on the note to do this? Also, I can choose to print different size photo if I want to?  Thank you.

  Hello

  You need to download the HP eprint and use it to try to print your photos. There are many printing options available.

  Once the two devices are connected to the same wifi network, you will be able to print from the eprint app.

• Want to 4500 All in One Printer: Envy 4500 and Photo paper

  Recently, I tried to use my 4500 want to print photographs, using HP Premium Plus Photo paper. Each attempted printing resulted in the printer telling me that there is a paper jam. I would open it upwards, remove the paper (which has never been really stuck - just looks like he started getting into the printer and stopped) and try again... Paper jam. I don't have the paper in the tray - went out my plain paper. I am able to print correctly on plain paper, but it won't take photo paper. Any ideas on how to solve this problem?

  Hi @kpdevlin,

  Welcome to the Forums of HP Support!

  I see you are trying to print a picture on your craving 4500 All in One Printer and it keeps blocking. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like there could be a problem with the rolls of paper, print settings, or the paper tray.

  Please work your way through this guide to see if you can solve the problem, a 'Paper jam' error on HP ENVY 4500 e-all-in-one HP Deskjet Ink Advantage e-all-in-one 3540 Printer series.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  You have a photo that you can try to make a copy of, as a test? It would be to help eliminate the printing as the cause.

  Please make sure that the paper type/quality settings are correct, for more information, please see this guide. HP ENVY 4500, printer Deskjet 3540 - change the Mac OS X print settings.

  In addition, if you have access to a Windows computer running Windows 8.1 or earlier, it is an update of the firmware available for your printer. HP Envy 4500 series firmware upgrade to improve the performance of the printer.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Want to 120 all-in-One - can't get color print?

  Working with a device like 120 all-in-One using Mac OS 10.9.  Whenever I try to print, the paper is still in black and white.  I guess I have some defect on but can't find it to correct.

  It happened when we bought first the HP device, running an earlier version of Mac OS.  Just downloaded the driver for Maverick, and I thought that would fix the problem - she didn't.

  Any suggestions?

  Hi DFDon149,

  I understand that you don't get any color on your impressions using the Mavericks OS X do you uninstall the previous software before using the Maverick update software? I would like you to take a look at OS X Mavericks v10.9: installing and using the printer on a Mac.

  If you did all the steps listed in this document and the color is always outside, please look at the suggestions on the Forums of Support from Apple. It seems that installation of the Gutenprint driver corrects the color on the issue.

  Please let me know if it was successful!

  Thank you

• Want to 4500 all-in-one: Envy 4500 scanner on the internet

  At home, I have a HP Envy 4500 all-in-one printer / scanner. I can the documents sent by e-mail to hpepint and that works very well.

  But I'm at work in another city and you want to scan a document located on the 4500 feel like at home.

  Is it possible to scan a document on the internet?

  My phone app it won't unless it is connected to the same WiFi network as the printer.

  Ric

  Hello

  IAM afraid to said that the analysis can be done on the internet.

  The Mobile/PC device should be on the same network for the scan to occur.

• want to 4500 all-in-one series

  I bought an envy4500 all in one series and after all tests and installation correctly, I had only one problem: when I print from excel files including 'grid' the printer will print all the lines in files. Sometimes jump the line grids, then print two or three grids correctily and back to the grid (lines). I made a copy of old copies and the copy was perfect.

  Thank you

  jbtpa

  Impression in 'best' or 'quality' mode should solve your problem.

  Alternatively, you can also use any other border style in Excel and it should print correctly.

  I would be grateful if this does not resolve your problem, or a problem on something other then Excel, border 'Style 2' in mode 'Normal' or 'Draft' hearing.

  Thank you!

• What ram DIMM upgrade is required for a want hp 23d203d all-in-one?

  I need more ram for my new computer purchased HP Envy touch all-in-one.  What brand is the best and can a 4 GB and 8 GB DIMMS BE USED TOGETHER or reason you need 2 like ram DIMM?

  Hi ThaiDenny. I understand that you are looking for your memory upgrade options.

  Under 'Information upgrade memory' in the present: HP ENVY 23 - d203d TouchSmart all-in-One desktop product specifications PC shows

  (I've included my comment in blue under the plug)

  • Dual channel memory architecture

• Owners of printer inkjet all-in-one Dell 962 thread (W7)

  Please follow the instructions below and then tell me what happens.

  Make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

  Unplug your printer.

  Download and run this patch to completely remove the printer from your computer. Run the fix, a MUST on Vista machines, until it prompts you to restart your computer.

  If you use Windows 7 also try... Driver Manual printer removal

  Restart your computer.

  Download the correct drivers.

  XP drivers

  Vista 32-bit drivers

  All other drivers

  Vista 64-bit drivers

  Install the appropriate drivers. You will be asked when connect you your printer (power on)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  If you use Windows 7, use the Vista drivers in compatibility mode.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Replace the Vista compatibility (try Vista SP2). Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

  Rick,

  Thank you much for the help. I took your advice and installed the Vista SP2 drivers in compatibility mode, and when my laptop is connected to the printer via a USB cable, I can print.  Now, here's the best... Later, I decided to have the printer put in place for the wireless.

  I tried to add a Dell network port, and then pass.  Did not work.  I tried also to add another printer by pointing to a shared printer on an XP computer.  I noticed one thing, it is that when the Dell printer software installed and prompted me to plug the printer into my USB port, it appeared that Windows snuck into another driver.  I saw a message saying that the printer was ready before the Dell software were made.  I also noticed that when I tried to create a new Dell printer two print drivers were available.

  In any case, I followed your instructions to uninstall everything (ran program of uninstalling the Dell software, rebooted, ran the patch to clean, restarted), then ran the Dell program configuration of the software (in compatibility mode Vista x 64 SP 2) and chose an installation over the network instead of local installation. He saw the Dell printer on USB wireless adapter and installed fine.  Now, everything seems to work wireless.

  I guess my point of view for writing is to warn that when you plug the USB cable during installation of Dell, it seems that Windows 7 is going to sneak in another pilot.  I also advise to install over the network if you want to try to use it wireless, rather than starting with the local USB installation and hope to switch to a network port later.  Thanks again for your message.

• problem printing wireless all-in-one b210a

  I have a printer all-in-one b210a, and a Macbook pro OS X 10.6.8 connected through a router. My wife has a same Macbook that prints successfully wireless. Mine does not work.  The computer seems to recognize the printer, but does not print. When you use the hp utility I get this message,

  "Some components installed on your computer have been developed for a different version of the HP utility. These components will not be loaded and some features related to your device won't be available. Please click on HP assistance point in the toolbar to visit the online HP Support site and download the latest versions of the HP software. »

  I have re-installed the software using the cd of printer and also HP online. I get the same message. I also cut and restarted power to all components, re-installed the printer a few times. You have any ideas?

  Thanks in advance.

  If you are using Snow Leopard, Lion or Mountain Lion and have HP software for Snow Leopard before (either from a CD that is not marked as compatible with 10.6-10,8 or you recently upgraded to Snow Leopard, Lion or Mountain Lion and had the software HP on your Mac before you upgrade - even if you made a standard uninstall of the old software or installed new software on top of it) You must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.