computer laptop w very long delay Vista at startup

Similar Questions

• Satellite L300-1 has 3 and WXP - computer laptop is very slow

  I installed Windows XP computer laptop Satellite L300-1 has 3.
  After portable installation is very slow, I think that the problem in the SATA driver.

  Please send me the driver SATA for Windows XP Home edition, or please give me the solution.

  Thank you

  Hello

  May I ask how you installed Win XP?
  Did you change the SATA mode on compatible in the BIOS settings?
  If yes then this problem is related to the missing SATA drivers!

  You can find the SATA drivers in the Intel Storage Manager which is placed on the page of European disk from Toshiba!

  Launch the .exe with the settings file a p

  For example (the files will be unpacked in the storagemanager folder):

  c:\downloads\iata_cd.exe - a c:\storagemanager Pei

  An accurate description, you will find in the Readme! Read it!
  Then you will get the unique file which could be included for Win XP CD using nLite software!

• Race of computer laptop Sony Vaio (vgn-cr220e) Vista 32 only starts up

  Hello!  I was not able to start windows for a few weeks now.  It began when I was running out of hard drive space and he got up to a.92 megabytes, when I turned it off for the night. The next day, I bought a WD My Book backup disk, but when I tried to install it, it would not allow me to do it in safe mode.  So I went to just manually copy as much as I could think of that external hard drive, I was able to release about 40 g of space.  But I have still a few other files that I copied, but now, it will not allow me into safe mood.  I see only a screen with files loaded and it stops at "charges: \windows\system32\drivers\crcdisk.sys" and it will not go further.

  I did hard drive checks, memory check and everything is good, but still will not load windows completely.

  I don't have a restore cd, no disk Vista installation (vista preinstalled), or it give me one of my restore points, I've created in the last couple months.

  Thanks in advance

  Karen Mae

  E-mail address is removed from the privacy *.

  Hello

  ·         You get the error message? What happens when you try to boot to the desktop?

  ·         You receive an error when you start normally?

  I suggest you follow the steps mentioned below:

  Method 1:

  Remove all the external driver and restart the computer and check if the problem occurs.

  Method 2:

  Restart the computer in last known good configuration (LKGC) and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 3:

  Start computer Windows recovery environment (WinRE) perform the Startup Repair and check if the problem persists. Follow the steps in the link: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Method 4:

  If her above fails step perform the system restore by using Windows recovery environment (WinRE) follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• very long delay before printing

  My MacBook Pro is around the age of 18 months. It is updated at El Capitan.

  Maybe a week or two ago, my printer stopped printing normally. I bought the printer at the same time as the Mac. It's a HP Officejet 8610. It is connected with a time capsule wireless newish.

  When I select print, a normal icon on the dock. Opening it displays a message to printer, printer not connected. I fought with him for half an hour or more, then give up in disgust and head to do other things. When I return to my office, there is the impression.

  I deleted the printer in system preferences, then reinstalled. I have reset the airport utility. I turned the printer on and outside.

  I believe the delay between the choice of printing and when the printer starts his work about half an hour.

  Open system preferences > printers and Scanners and then select the print tab then check or right on the printer on the left then click: reset the printing system

  Then try to print.

• computer laptop dv5t: very low sound, solution?

  You just bought dv5t: very low volume, especially when recording on audio or video screen. Also, when I record on the screen, I hear picked up in the room, (talk, etc.) mixed. Can someone tell me what the correct sound settings should be for video screen and audio recording? I use debut video capture software and I use "mp3mymp3" for audio capture. Checked their manual, but cannot find a solution. I also use Skype to call and have no sound problem it. Windows 7 Home premium 64-bit. Thanks, Anne

  Hi Anne,.

  One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers & headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• Keyboard a long delay by typing, made noise of rattling on speakers for each trait.

  I am running Windows XP on a Dell XPS 400 desktop computer. My keyboard developed a very long delay by combination of keys and would make a clicking sound on the speakers every time that a button is pressed. I used a Logitech wireless keyboard, so I changed the batteries, checked the range to the receiver, still nothing. I bought a wired keyboard USB (new Logitech), thinking that my wireless keyboard was bad. The wired keyboard does exactly the same thing. I checked keyboard settings and everything is set to the fastest setting. I have troubleshooted the device, and that it works correctly. I guess it's some kind of virus or malware, but I use McAfee and I didn't do anything. Also, I tried to do a system restore and I can get the system restore menu, but my mouse moves sporadically and the keys are unusable (it works fine everywhere else). The only command that I can navigate to with the keyboard is the RESTART button. So I can't run a system restore. Any ideas on what it is or how to get rid of?

  Hello Skico25,

  Thank you for your message.  This could be a driver problem.  Access the Web from Logitech site and download/install the latest driver for your device.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the listening Service: Long delay beginning listener, intermittent connections

  I have problems to connect to my Oracle database.  I don't know what was the cause, but now when I connect to a database that has been working well for the past two years, I usually get an ORA-12541 error.

  I run lsnrctl status on the server and get a prinout like this:

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dqaswn02) (PORT = 1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Windows 64-bit error: 61: unknown error
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Windows 64-bit error: 2: no such file or directory

  I also tried to manually stop the service through services.msc, then by restarting via lsnrctl start, but when I do this I get a very long delay (10 + minutes) before he comes back with something like:

  TNS-01153: failed to process the string: 0i ≈ ♥
  

  I'm quite lost as to what is wrong.  I've been messing around with listener.ora, but I don't see anything difficult in there.  Here's a copy:

  listener.ora # Network Configuration file: E:\app\myc0714\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = E:\app\myc0714\product\11.2.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:E:\app\myc0714\product\11.2.0\dbhome_1\BIN\OraClr11.dll")
  )
  )

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = dqaswn02) (PORT = 1521))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  )

  # ADR_BASE_LISTENER = E:\app\myc0714
  LOG_FILE_LISTENER = LISTEN PORT
  TRACE_LEVEL_LISTENER = SUPPORT
  TRACE_FILE_LISTENER = LISTEN PORT

  A few times during that time, I was able to connect to the server, via sqlplus, however, it took 10 minutes before the connection is online.  Once I'm connected, I can ask my paintings as expected, but I need an application to connect.

  If anyone has any ideas on what could be the problem, please let me know.
  

  In fact, there was another thing, I changed when I finally got it works, although I don't know if it was related or not.  In my folder with my track logs, I had a huge (> 4 GB) listener.log file.  I deleted this file right before that I ran the command netsh command to reset and then restarted.  This file was also a bit special, because it had not been updated since around the time that I first encountered this problem.  It seems to be updated on a minute by minute basis, now that I've removed the old.  Is there a problem with this file becomes too big?  My drive was not out of space, but it is very curious that this stopped file update on the same day as when I started having the problem and now works properly again.  I wish I had noted the exact time until I deleted it.

  Link:

  Problem of Listener.log & #8211; large file | Obtained & #039; s Blog

• I bought the latest Samsung computer some three weeks ago. My laptop is very slow when I go on the internet but other computers are fine.

  Hello

  I bought the latest samsung computer (notebook 9) three weeks ago. My laptop is very slow when I go on the internet. I have three other phones in my house and they all work very well. Is there any configuration that I should look because the guy told me that it is all the pre-configured.

  Thank you

  original title: network connection

  Hello Pierre,.

  I suggest that you look at this article from Microsoft that can help solve a slow internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• FF opens ok, but why is it so very long to load my homepage. I have new laptop, windows 7.

  FF opens ok, but why is it so very long to load my homepage. I have new laptop, windows 7. Can anyone suggest a solution please.

  This has happened

  Each time Firefox opened

  == yesterday to no apparent reason.

  Try running Firefox in questions to troubleshoot Firefox in Safe Mode

• in my home network xp laptop in 'My network places' can't see the two other vista computers portable altought they can see computer laptop xp

  in my computer laptop network xp home in my network places can not see the two other vista computers portable altought they can see xp laptop computer and access this computer laptop xp shared docs, laptops 2 vista can see eachother so working group name is on all computers the same portable 3, all are connected etc. What can I do to see the portable 2 on my computer vista laptop xp

  Hi wiking17,
   
  Follow the suggestion given in the article below to resolve this issue:
   
  You can't see the other computers in the workgroup on the network on a Windows XP-based computer
   
  Additional reference on:
   
  Troubleshooting of network domestic

• I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP

  I have 2 laptops and one desktop.  Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help.  I use Windows XP

  Hi JessaRoy,

  · The computer connected to the network or are they computer autonomous?

  · What is the number and the model of the computer?

  · What is the service pack installed don the computer?

  · What is the full error message with the error code, that's all?

  · What are the steps you tried to solve the problem?

  Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Computer laptop Gateway with Windows Vista has locking password HARD drive on it.

  I bought a computer laptop gateway I believe it has windows vista but it has locking password on that HARD drive can I buy windows 8 or 8.1 and download on it. Also it allows me to run any cd what can do?

  * Original title: laptop computer purchase

  Hello

  I suggest that you either get the password from the seller or return the laptop to the seller and get a refund.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I can't get a secure boot or anything. are there secret shortcut keys or anything like that? !! ??

  Dear klh76

  You need a USB FLASH DRIVE, you can transfer the files from the Recovery Console Windows Vista from any other pc or laptop running Windows Vista, go to the backup and restore on the other computer and click on create a drive recovery system on the file menu. Once done, insert the usb key into the laptop, you want to fix, start by using selected peripheral USB device as MBR, follow these steps on screen, you can repair a corrupt Windows Vista it or restore to a previous restore point.

• How can get the keys to windows vista for my computer laptop elitebook 8530w c

  Hello

  I bought a computer laptop elitebook 8530w sn 2CE94100GR with vista installed windows. the laptop has collapsed, and now I need the keys to re - install windows vista back. The windows sticker is not there. kindly advice. Thank you.

  Hello

  I bought a computer laptop elitebook 8530w sn 2CE94100GR with vista installed windows. the laptop has collapsed, and now I need the keys to re - install windows vista back. The windows sticker is not there. kindly advice. Thank you.

  ===================================================
  For OEM support software... Check with your computer manufacturer.