Long Mode does not

Similar Questions

• Debug mode does not

  Hello
  
  We are in the process of migration of the APEX v3.2.1 on the database 10 g to v4.2.1 on database 11 g. APEX APEX is installed fresh on 11g. I was testing imported and exported of v3.2.1 application in v4.2.1. I was not able to activate the debug mode in the developer bar when the application runs. The url changes, but no debug information appears as was the case in v3.2.1. I see a partial set of debugging information when I open then see the debug window in the bar of developer. This show of debugging is incomplete. By that I mean I don't see not session state change and I don't see any information in the function "wwv_flow.debug".
  
  I read in a thread for an earlier version 4, toggle the debug field in edit application properties and apply, but that no longer works. Something to note is that when the debug field in edit application properties was set to NO, I don't have the error "Debugging is not enabled for this application" when you turn on the debug mode.
  
  I created a zero of application form and debug mode does not work either.
  
  There is a global setting in administration somewhere I should activate to get debug information in the page as in v3.2.1?

  dominiquefortin wrote:

  We are in the process of migration of the APEX v3.2.1 on the database 10 g to v4.2.1 on database 11 g. APEX APEX is installed fresh on 11g. I was testing imported and exported of v3.2.1 application in v4.2.1. I was not able to activate the debug mode in the developer bar when the application runs. The url changes, but no debug information appears as was the case in v3.2.1.

  No debug information appears online in the APEX 4.x page. All of this appears in the debug window.

  I see a partial set of debugging information when I open then see the debug window in the bar of developer. This show of debugging is incomplete. By that I mean I don't see not session state change and I don't see any information in the function "wwv_flow.debug".

  Note that the debug window contains an interactive report that applies a default filter for the last visited page. You might not see the report of the desired page. Remove the filter from the page to see all the currently available debug reports. There are also separate reports for each page show/accept, then make sure that you select the correct phase.

  I read in a thread for an earlier version 4, toggle the debug field in edit application properties and apply, but that no longer works. Something to note is that when the debug field in edit application properties was set to NO, I don't have the error "Debugging is not enabled for this application" when you turn on the debug mode.

  I think maybe I saw a bug for this, but I can't find a reference at the moment.

  There is a global setting in administration somewhere I should activate to get debug information in the page as in v3.2.1?

  N ° all debugging information are now displayed in the debug window.

• Guest mode does not appear on my sony S1 Tablet

  I have the Sony Tablet S1 but the guest mode does not present as an option where it should be in the upper right. I've checked everything and I am on the correct operating system, but it is not yet here.

  I did a factory reset and now I can see and use the Mode guest, try it and let me know if this worked for you too, good luck!

• XP mode does not recognize my 6023E PCI card

  I bought a new Win 7 with a PCI slot inherited to execute an OLD NI PCI-6023E card I used for years.  I downloaded the drviers legacy NOR (7.4), but he does not see the card.  When I look in Win 7 the card is there but I can't run the 64-bit drivers testament and with my old software (C++).   I have connected a NI USB-6008 card and was able to open the card in XP mode... any ideas?

  Unfortunately, XP mode does not work with the PCI/PCIe devices, only those USB. Most (all?) programs virtualization will have this limitation.

  As you probably expected, the General recommendation is to migrate to the API OR-DAQmx for your application if you want to that support on Windows 7.

  If this is not possible, then there is a section of the knowledge base on a Beta OR-DAQ traditional (old) for Windows Vista and 7 , who might be interested. At a minimum, it will take allows you to use a 32-bit installation of Windows 7, not a 64 bit.

• OfficeJet Pro 8620: Sleep mode does not

  "Sleep" mode does not work on my new settlement 8620. I tried to change the duration of sleep from 5 min. to 10 and 15, but he was not asleep yet. I tried to close and restart the unit, but that did not help. 2 times the unit did go to sleep, but then he woke up after a short time.  Any suggestions?

  Hello

  Fitrst ensure that the printer has the latest firmware:

  http://support.HP.com/us-en/document/c04083718

  More don't forget to connect its completely directly to a wall outlet and not by some power strips, surge protectors, etc.

  If the same results persists, try temporary disconnect a cable from the back of the printer in order to isolate any possible cause (e.g. fax, USB cable, etc.), remove one cable at a time and to check for the difference.

  I suggest starting with telephone wires, telephone line condition as example may prevent the printer from sleep remaining.

  Please let me know the results,

  Shlomi

• Sansa e260 MSC mode does not show my files

  I never have problems with my player sansa until today. I just updated the firmware and now MSC mode does not work correctly. None of my files on the Sansa e260 player appear, do just the default values. However, everything is there when I go through my sansa player, but he does not appear in the player. No clue as to how I can solve this problem, so that the files that I have in my sansa player appear in the disc again? Any help is appreciated, thanks!

  The music on the e200 series folder is "hidden". Maybe that is. Change the settings in Windows to "show the hidden files and folders" and see if that helps.

• Windows vista Theme it's not uninstall and safe mode does not work

  I try to uninstall the windows vista theme, but it is not uninstalled. A black screen is coming, and it is disappearing. I also try to uninstall the theme of windows vista by creating my new account, but it is not uninstall same problem is coming. I also try to uninstall by opening my PC in safe mode. but my safe mode does not open

  I hope you answer me as soon as possible.

  Hello

  Follow the link

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• Xperia Z2: Stamina mode does not aparently

  Hello

  Endurance mode does not work on my phone aparently. I have try all configurations, but the sotware disable wifi and mobile data operator when I block, or turn off the camera screen. I continue to receive information from applications and I did not any exception on the configuration of the endurance. Any idea to solve this problem?

  Hello.. To do this
  Go to settings
  Apps-> all-> the controller in eco mode
  And empty the cache and data... Before you click on stop and restart your phone... It should work

• chrome on windows 8 metro passes automatically mode does not.

  chrome on windows 8 mode does not, change in the subway. Browser is blocked in the background. I can't go back to desktop mode because the browser is not accessible. Tried to reboot the computer, but no use.

  Hi reda,.

  Thanks for posting your question in the Microsoft Community.

  I appreciate your efforts in getting the problem solved. I will definitely help you.

  The description of the problem, it seems that you have problems with the help of Chrome in desktop mode.

  Please answer the following questions so that I could help you further:

  1. Did you of recent changes made to your computer?
  2. Do you get any error messages?
  3. You have a parallel operating system installed?

  Try these steps and come back to me with the results:

  1. Alternative browser
     Download another browser like Internet Explorer or Mozilla Firefox.
  2. Default browser
     Chrome can run using the subway if configured as the default browser.
     You can search for "Set your default programs" in the start screen and click 'Settings' in the right pane. Then select Internet explorer (or other browser) in the list and click on "set this program as default.
  3. Chrome for the Office
     Uninstall Chrome app by right-clicking above and selecting "uninstall." Then, install the version of Office Chrome from here: https://www.google.com/intl/en/chrome/browser/?hl=en&brand=CHMA&utm_campaign=en&utm_source=en-IN-ha-bk&utm_medium=ha&utm_term=%2Bchrome

  If this does not resolve the problem or you need help, feel free to reply to this message.

  Ashwin

   

• I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  Please contact the original publisher of the widget.

  Thank you

  Sanjit

• Dremweaver CS6. Design mode does not work.

  

  Hello.

  Design mode does not work.

  I got this instead of the normal display mode.

  What's wrong with it?

  Kind regards

  NATA

  Go to the main toolbar and choose View > happy head and turn it off.

• Qosmio X 875 - ECO mode does not work immediately after Win 8 upgrade

  I used the upgrade Toshiba Upgrade Wizard to Win 8. He succeeded well uninstall the incompatible software before the upgrade and install the new Toshiba and driver versions after the upgrade.

  I activated the ECO mode, and to my surprise, it does not work as before (in Windows 7):

  * Now, it works with the brightness to level 1 *... very dark. Before, ECO mode allowed me to go up to level 4 and was always considered in Eco mode...

  If I increase the brightness, the 'eco mode is disabled' message opens immediately.

  How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?

  BTW, I am owner of a Qosmio X 875

  Post edited by: qosmitto

  > How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?
  Contact your Toshiba authorized service provider in your country.

  Read this:
  + What is the TOSHIBA eco Utility? +
  http://APS2.toshiba-tro.de/KB0/FAQ2503AT0000R01.htm

  > It changes the brightness of the display of level 4, changes the brightness of the grey screen of level 1 (* 4),.
  _The * 4 means only on models with Windows7 installed _

  I guess that the previous configuration was only Win 7.

  8 win was made for mobile (use of the Tablet), the energy consumption of battery is also very important plant help to win 8. The consumption of the battery must be taken at the lowest level possible.
  So I guess that now help win 8 ECO medium mode and save the power max and long battery life time working at a max level.

• Try to install Indiana Jones and the infernal Machine, Windows (8 / ME) compatibility mode does not

  I try to install Indian Jones and the Doomsday Machine on my computer.
  I tried using the compatibility mode for windows 98 / ME, but it does not work. When I run the program splash arrives, but when I click on install it closes then nothing happens. There are no errors.
  I am running Windows 7 64 bit.
  Also I install the original CD, and it has worked before in older computers (running Win 98 of course).
  Any help would be appreciated.

  The game should run fine under Win7 64 bit. The problem is that the installer is only 16 bit and is no longer supported in Windows. Just use a different Setup program. Try www.markusegger.at. I'm running the Doomsday Machine, Alliance Xwing, Xwing v's Tiefighter, and Grim fandango all on 64 bit Win7 all using custom Setup programs.

  I also used the original X-wing, Tie-fighter and fate of Atlantis via Dosbox.

• Private browsing mode does not work

  I've been without a pc for a while, now have a new with Windows 10. Just downloaded latest Firefox. I put it to always open in private browsing mode. But it does not work. When I close the browser, and then re - opening, my start page is not display the mask or indicate private browsing. I can get it in the usual way, just right-click on the icon that gives you options to open the new window or a private.
  I tried to turn on/off the navigation mode private the several times, still no luck.

  Probably, you won't see the purple mask of private browsing mode when you are in permanent PB mode because all windows are automatically in PB mode.
  You will see the mask when Firefox is started in normal mode and you open a new private window.

  You can use an extension for private browsing mode support tab.

  • Private tab: https://addons.mozilla.org/firefox/addon/private-tab/
  • Private browsing mode tabs get a dotted underline
  • You can enable or disable private browsing mode / disable via the context menu of a tab

• Firefox crashes on startup in normal mode and safe mode does not start reset mode

  using 26.0 FF
  using windows 7 Home premium v 6.1 (last)

  My problems started after the loading of 26.0 FF. If I start FF in normal mode it crashes. Same thing when I boot in safe mode. I close FF (while it's hanging) by clicking on the X in the upper right.

  When I launch FF in safe mode and click Reset FF, it crashes without FF never appear. I have to stop it using the Task Manager. Off mode reset, I can launch FF in normal mode and everything works fine. However, stopping FF does not close it. I have to use the task of the Manager close. Then I'm at square one when you try to start FF, i.e. reset firefox, crashes, Task Manager, stop, then start FF.

  When FF is on, I can open a new window of FF. All my addons are up-to-date. I reinstalled FF 26.0, three or four times.

  I deleted the cache and cookies.

  I scanned for viruses and rootkits etc. with microsoft security essentials and spybot.

  I've been a happy user of FF for over ten years and have never had a problem like this. Any help will be appreciated.

  Thank you!

  I think that I fixed it, it gives a trial because he has started to do this on my two PCs.

  Go to Options > general tab > start switch / "Show a blank page" and the charges of all good. What I used was 'Show my home page' which is the default page of Firefox with the Logo of Fox and history, Favorites and other options at the bottom.