Windows vista Theme it's not uninstall and safe mode does not work

Similar Questions

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Vista product key will not work. I checked with Microsoft and they said, that it is used.

  My activation key # does not work. It came with a disk and key * removed product key *. I just checked, and Microsoft said it has been used. Could you send me a key # likely to work or simply to activate my vISTA HOME PREMIUM 32

  original title: Activation key #.

  It's probably normal - it IS used by your previous installation

  You use telephone activation

  telephone activation.
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

  You can also post a full report of MGADiag here, and we can advice a little more precisely what may be the problem...
  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please
  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• Windows Vista HomePremuim OEM - Key not work

  recently my computer sony laptop hard drive broke, so I change the new one and then install oem Windows Vista HomePremuim but after I can not active there. My oem key comes from the sony laptop.  He says "the product key you entered dose does not seem to be a valid windows vata" product key.    now, I can only 30 days trial. only 28 days left. need help please.

  How did you install Vista?  If you have used a dvd recovery then it shouldn't require the entry of a product key.  If you are being invited to activate it, you can activate using the 25 character product key printed on the label at the bottom of the laptop or, in models later in the battery compartment.  Make sure that you do not enter a B for an 8, etc.  I suggest to use a magnifying glass and a bright light to make sure that you read the characters correctly.

  If it's a standard dvd of Windows, where did find the product key?  If it's a retail dvd, you must use one on the label on the dvd case.

• Vista start not only restored at the factory and safe mode does not work

  Hello

  I have experience blackheads on the dell splash screen, then it continues to the f1 f2 to Setup because I don't have a floppy drive, it is okay to continue. On this screen but I have blue dashes experience everywhere in this moving around every 20 seconds or more. When I hit f1 I get a low quality graphics Windows load bar and then a black screen after 5 to 10 seconds. Followed by a blue screen of death with the code 0x0000008e. Then restart. I then tried the F8 key and restored in a last known point that worked, does not solve my problem. Tried to boot in SafeMode (normal) and I get the blue wheel scrolling as it's almost here, and then a reboot without explanation. Also, I tried to move the cards gfx and switching of slot machines, this is not having an effect. But I noticed when using a card, I get a quick 5 beep at startup, then using the other card it works fine. Is a card? This would have an effect on my boot because of the missing material? Help, please!
  Data sheet:
  Dell XPS 630i
  Quad Core - 2.4 ghz
  4 GB RAM
  Dual Nvidia 9800gt
  I have known 3 hard disks
  Windows Vista 32-bit sp1

  Hello

  Looks like a graphic problem

  beep codes are normally related material

  read below

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

• Vista 64 Windows - stuck in the windows error recovery loop. don't go to safe mode, does not recognize the recovery disc.

  Gateway dx 4200-ub001a

  quadruple-heart, 6 GB of ram. No hardware problem, that I can find.
  restarts just constant return to the windows error recovery screen.
  get a blue screen saying change the bios if it continues to happen, but nothing specific. Impossible to get
  BIOS screens in any case. nothing takes me out of the loop, I can understand.

  See if you can load (using F10 or F12) a free Diagnostics, bootable from here: http://www.carrona.org/initdiag.html

  If this does not work, then try F2 to enter the BIOS.
  Together, the boot order so that the CD/DVD is first, then try to run the diagnostics bootable from here and free: http://www.carrona.org/initdiag.htmlf

  If this does not work, then you need to try another CD/DVD drive (or take it to a shop for an estimate).

  Good luck!

• After having upgraded to Firefox 24 it now won't start at all after clicking on the icon. My OS is Windows Vista premium. It will start in safe mode.

  Upgrade to Firefox 24 and now nothing works at all despite uninstall it and reinstall several times and lose all my favorites etc. However, it does not start in safe mode. At first, I thought it was my Norton 360 Security, but after 2 hours in contact with them, I'm still in the same position. When I double click on the Firefox icon I see the moment where the cursor and then it disappears and nothing loads.

  My OS is Windows Vista Premium and I use Windows internet explore for the time.

  HELP Please!

  Thank you nellus91.

  I used the Microsoft Safety Scanner first, and it found nothing. I then used TDSSkiller and he found the problem.

  Problem solved.

  Thank you.

• Windows Vista premium edition starts only with the safe mode or safe mode with network.

  There was a low voltage or surge protector and the computer came out. System Restore does not work.

  Hi ValrieSingh

   

  1. have you tried to start in normal mode after the issuance of the power?

  2. what happens if you start in normal mode?
  3. do you get errors in normal mode?

   

  You can check results when you activate the mode low resolution. It starts Windows using your current video driver, frequency settings low resolution and refresh. You can use this mode to reset your display settings.

  See also the links below for help on the issue-
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  I hope this helps.

• Inspiron 9400 laptop, Windows Vista, black screen with cursor, befor connection, safe mode works.

  Good then Ive internet scowerd to subject a houre read a lot of black screen of death without success problems.  Ive come to the conclusion that it is a unique problem.

  Inspiron 9400, Windows vista

  Problem: I'm catching up after startup, it does not show the vista logo but showed the loading bar, doesn't make it to the login screen. Instead shows the bright black screen with a cursor, the cursor moves freely. Ctrl-alt-del does not work, StickyKeys is sound but no visual. So we know that this abomination of windows load. We are now trying to startup repair. We know that the battery did not work because more than a year, the bios indicates there is no battery, I wonder what this block that says battery is lol.

  Whatcha got for me internet doesn't let me down.

  PS one of the dumbest moments of windows.

  Repair window said. May take a few minutes.

  Startup Repair process may take an hour to complete

  Hi Zirrer,

  Step 1:

  I suggest you to visit this link provided below.

  Why my screen is black when I start windows 7
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Step 2:

  I would also suggest update you your display adapter drivers and see if that fixes the problem.

  Reference:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  To download drivers, you can visit this link below.

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&CS=19&l=en&s=DHS&OS=WLH&OSL=en&SystemID=INS_PNT_P4_9400&CATID=-1&impid=-1

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Firefox crashes on startup in normal mode and safe mode does not start reset mode

  using 26.0 FF
  using windows 7 Home premium v 6.1 (last)

  My problems started after the loading of 26.0 FF. If I start FF in normal mode it crashes. Same thing when I boot in safe mode. I close FF (while it's hanging) by clicking on the X in the upper right.

  When I launch FF in safe mode and click Reset FF, it crashes without FF never appear. I have to stop it using the Task Manager. Off mode reset, I can launch FF in normal mode and everything works fine. However, stopping FF does not close it. I have to use the task of the Manager close. Then I'm at square one when you try to start FF, i.e. reset firefox, crashes, Task Manager, stop, then start FF.

  When FF is on, I can open a new window of FF. All my addons are up-to-date. I reinstalled FF 26.0, three or four times.

  I deleted the cache and cookies.

  I scanned for viruses and rootkits etc. with microsoft security essentials and spybot.

  I've been a happy user of FF for over ten years and have never had a problem like this. Any help will be appreciated.

  Thank you!

  I think that I fixed it, it gives a trial because he has started to do this on my two PCs.

  Go to Options > general tab > start switch / "Show a blank page" and the charges of all good. What I used was 'Show my home page' which is the default page of Firefox with the Logo of Fox and history, Favorites and other options at the bottom.

• Error \boot\bcd 0xc000000f and windows vista recovery status do not work

  Well, I have HP Compaq Presario v3751AU and he could not start today and in \boot\bcd 0xc000000f error.

  I try to put in the recovery disc, it gave me the message "" press any key to start from the CD or DVD. "" When I do this, all that appears is a black screen that says "Windows loading files...". "with a white loading bar in the background, but it is not actually boot from the disc then. the mouse pointer is displayed on the background green-vista, but there is nothing I can click, such as the 'next' button or even the language selection button. He continues to freeze on the vacuum-vista-green background.

  can someone help me?

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• I have a Toshiba with vista 64-bit. Stuck on welcome screen and safe mode does not start loading windows files pass,

  My phone threw sleep for a few months because I had no internet. I just got the internet hooked upward and started the computer, worked fine until about 10 mins in., I got a blue screen crash. tried to restart and now when I click on my user account he just says welcome and very much in charge. halp please! Ive been working on this problem for 8 hours now and its getting a bit frustrating I sem find lots of ppl with the same problem or similar but not much help answers.

  Hello

   
  I suggest that contact your computer manufacturer to get the disc to repair the system to solve the problem.

• Windows vista disk seems to not work

  I'm trying to reformat my computer, but when I try to boot from my 64 bit vista family drive premium without options appear. The disc spins, but it just shows the blue backscreen and does not run the usual options. I've only used the disc a couple of times before and it doesn't seem like scratches on it.

  If the problem is with the disc itself and I need to download files, how can I get it to load in the start?

  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  There is no place to download a legal copy of the installtaion disc.  Here is Microsoft's policy on replacing lost or defective software: http://support.microsoft.com/kb/326246.  You can always borrow a disk for Installation of Vista on the same size of the bit ANYONE and use if, for installation with your product key.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista, scroll bars are not working.

  Scrollbars bounce upward when 'caught '. I also have to use the scroll arrows to one click at a time to move the page.

  It's the mouse that was defective. Bought and installed a new and scroll bars work properly. Thanks for your reply.

• How can I uninstall windows vista if it is not authentic

  How to uninstall windows vista if it is not authentic

  Hello

  You do not uninstall as such.

  You would normally buy a legitimate operating system disk / license and do a clean install with it, by removing the non-genuine Vista during the installation process.

  Or you can download this program (Darik Boot and Nuke) > make a Bootable Disk with him > Boot and wipe the hard drive of everything:

  http://www.DBAN.org/

  You can buy a legitimate operating system if you want to continue to use this computer.

  See you soon.