Debug mode does not

Similar Questions

• Guest mode does not appear on my sony S1 Tablet

  I have the Sony Tablet S1 but the guest mode does not present as an option where it should be in the upper right. I've checked everything and I am on the correct operating system, but it is not yet here.

  I did a factory reset and now I can see and use the Mode guest, try it and let me know if this worked for you too, good luck!

• XP mode does not recognize my 6023E PCI card

  I bought a new Win 7 with a PCI slot inherited to execute an OLD NI PCI-6023E card I used for years.  I downloaded the drviers legacy NOR (7.4), but he does not see the card.  When I look in Win 7 the card is there but I can't run the 64-bit drivers testament and with my old software (C++).   I have connected a NI USB-6008 card and was able to open the card in XP mode... any ideas?

  Unfortunately, XP mode does not work with the PCI/PCIe devices, only those USB. Most (all?) programs virtualization will have this limitation.

  As you probably expected, the General recommendation is to migrate to the API OR-DAQmx for your application if you want to that support on Windows 7.

  If this is not possible, then there is a section of the knowledge base on a Beta OR-DAQ traditional (old) for Windows Vista and 7 , who might be interested. At a minimum, it will take allows you to use a 32-bit installation of Windows 7, not a 64 bit.

• OfficeJet Pro 8620: Sleep mode does not

  "Sleep" mode does not work on my new settlement 8620. I tried to change the duration of sleep from 5 min. to 10 and 15, but he was not asleep yet. I tried to close and restart the unit, but that did not help. 2 times the unit did go to sleep, but then he woke up after a short time.  Any suggestions?

  Hello

  Fitrst ensure that the printer has the latest firmware:

  http://support.HP.com/us-en/document/c04083718

  More don't forget to connect its completely directly to a wall outlet and not by some power strips, surge protectors, etc.

  If the same results persists, try temporary disconnect a cable from the back of the printer in order to isolate any possible cause (e.g. fax, USB cable, etc.), remove one cable at a time and to check for the difference.

  I suggest starting with telephone wires, telephone line condition as example may prevent the printer from sleep remaining.

  Please let me know the results,

  Shlomi

• Sansa e260 MSC mode does not show my files

  I never have problems with my player sansa until today. I just updated the firmware and now MSC mode does not work correctly. None of my files on the Sansa e260 player appear, do just the default values. However, everything is there when I go through my sansa player, but he does not appear in the player. No clue as to how I can solve this problem, so that the files that I have in my sansa player appear in the disc again? Any help is appreciated, thanks!

  The music on the e200 series folder is "hidden". Maybe that is. Change the settings in Windows to "show the hidden files and folders" and see if that helps.

• Windows vista Theme it's not uninstall and safe mode does not work

  I try to uninstall the windows vista theme, but it is not uninstalled. A black screen is coming, and it is disappearing. I also try to uninstall the theme of windows vista by creating my new account, but it is not uninstall same problem is coming. I also try to uninstall by opening my PC in safe mode. but my safe mode does not open

  I hope you answer me as soon as possible.

  Hello

  Follow the link

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• Xperia Z2: Stamina mode does not aparently

  Hello

  Endurance mode does not work on my phone aparently. I have try all configurations, but the sotware disable wifi and mobile data operator when I block, or turn off the camera screen. I continue to receive information from applications and I did not any exception on the configuration of the endurance. Any idea to solve this problem?

  Hello.. To do this
  Go to settings
  Apps-> all-> the controller in eco mode
  And empty the cache and data... Before you click on stop and restart your phone... It should work

• SE "debug token does not apply to this device".

  After graduating from "misssing of signatures required 881 result::failure ", I created a new debugtoken by following the instructions on the webpage «Using tokens debug» webworks "With success created, deployed it on my ' dev unit alpha" (first removed the earlier) and placed a copy in the directory sdk webworks. But when you try to deploy an application on the device, I get the following text:

  result::failure 881 debugging token does not apply to this device

  Try to hold the power button on top for 15 seconds to do a reset.

• chrome on windows 8 metro passes automatically mode does not.

  chrome on windows 8 mode does not, change in the subway. Browser is blocked in the background. I can't go back to desktop mode because the browser is not accessible. Tried to reboot the computer, but no use.

  Hi reda,.

  Thanks for posting your question in the Microsoft Community.

  I appreciate your efforts in getting the problem solved. I will definitely help you.

  The description of the problem, it seems that you have problems with the help of Chrome in desktop mode.

  Please answer the following questions so that I could help you further:

  1. Did you of recent changes made to your computer?
  2. Do you get any error messages?
  3. You have a parallel operating system installed?

  Try these steps and come back to me with the results:

  1. Alternative browser
     Download another browser like Internet Explorer or Mozilla Firefox.
  2. Default browser
     Chrome can run using the subway if configured as the default browser.
     You can search for "Set your default programs" in the start screen and click 'Settings' in the right pane. Then select Internet explorer (or other browser) in the list and click on "set this program as default.
  3. Chrome for the Office
     Uninstall Chrome app by right-clicking above and selecting "uninstall." Then, install the version of Office Chrome from here: https://www.google.com/intl/en/chrome/browser/?hl=en&brand=CHMA&utm_campaign=en&utm_source=en-IN-ha-bk&utm_medium=ha&utm_term=%2Bchrome

  If this does not resolve the problem or you need help, feel free to reply to this message.

  Ashwin

   

• Dremweaver CS6. Design mode does not work.

  

  Hello.

  Design mode does not work.

  I got this instead of the normal display mode.

  What's wrong with it?

  Kind regards

  NATA

  Go to the main toolbar and choose View > happy head and turn it off.

• 'Ctrl + End' keyboard shortcut does not work as expected. I tried safe mode. does not move the tab to the end of such specified list, just scroll to the end of the page.

  According to http://support.mozilla.com/en-us/kb/keyboard+shortcuts,.
  'Ctrl + End' should move the active tab to the end of the list of tabs.

  But the shortcut does not work. Only, it scrolls to the end of the current page as if only "End" is pressed.

  I tried the mode without failure of firefox and closed all other open programs.

  What to do to debug this problem?
  or may there is a bug in firefox somehow?

  See the post of dao in this MozillaZine forum thread: http://forums.mozillazine.org/viewtopic.php?f=23 & t = 1304895

  Add code to userChrome.css below @namespace.

  See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  .tabbrowser-tab[selected="true"] {-moz-user-focus: normal !important;}
  

• Debug parameters does not

  I can't configure 3.0 with Glassfish 4.1 and Apex 4.2.4 ADR. When I try to run the default page of Apex (http://localhost:8080/ADR /) I was all just an error page 404, with no other useful information. The little localhost:8080/i/apex_version.txt thing works as expected (which I assume means that the i.war is properly deployed). And I get messages from success in the server.log file when I deploy the i.war and the ords.war. Starting the Glassfish server gives no error, nor do I see any error name of user and password in the server.log, which are typical for the names of username/password wrong configured to the Apex and the REST of the service accounts.

  I did (and again and again, and again) the configuration of the various changes that have been suggested here on the forum (ords.war of installation, user ords.war, ensured that the PL/SQL gateway is added, etc.) as well as to ensure that I can connect to the database with different user accounts. I read, re-read and re-read the documentation. I try you simply debugging to go on the browser when I try to run the default Apex page and I'm not having any luck.

  Here's my default.xml

  
  <?xml version="1.0" encoding="UTF-8" standalone="no"?>
  <!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
  <properties>
  <comment>Saved on Tue Jul 07 14:18:18 MDT 2015</comment>
  <entry key="cache.caching">false</entry>
  <entry key="cache.directory">/tmp/apex/cache</entry>
  <entry key="cache.duration">days</entry>
  <entry key="cache.expiration">7</entry>
  <entry key="cache.maxEntries">500</entry>
  <entry key="cache.monitorInterval">60</entry>
  <entry key="cache.procedureNameList"/>
  <entry key="cache.type">lru</entry>
  <entry key="db.hostname">foo.server.name</entry>
  <entry key="db.port">1521</entry>
  <entry key="db.servicename">oracle</entry>
  <entry key="debug.debugger">true</entry>
  <entry key="debug.printDebugToScreen">true</entry>
  <entry key="error.keepErrorMessages">true</entry>
  <entry key="error.maxEntries">50</entry>
  <entry key="jdbc.DriverType">thin</entry>
  <entry key="jdbc.InactivityTimeout">1800</entry>
  <entry key="jdbc.InitialLimit">3</entry>
  <entry key="jdbc.MaxConnectionReuseCount">1000</entry>
  <entry key="jdbc.MaxLimit">10</entry>
  <entry key="jdbc.MaxStatementsLimit">10</entry>
  <entry key="jdbc.MinLimit">1</entry>
  <entry key="jdbc.statementTimeout">900</entry>
  <entry key="log.logging">false</entry>
  <entry key="log.maxEntries">50</entry>
  <entry key="misc.compress"/>
  <entry key="misc.defaultPage">apex</entry>
  <entry key="security.disableDefaultExclusionList">false</entry>
  <entry key="security.maxEntries">2000</entry>
  </properties>
  
  

  
  

  After I have change the configuration I stop / start the Glassfish domain.  However, when I try to load the page by default (localhost: 8080/ADR /) I get no joy. An error page 404 with no debug information. Obviously I'm doing something wrong here, but I can't sort it out for the life of me. Is there some kind of a trick to get debug info running after changing the default.xml (Yes, I stopped and restarted the Glassfish domain)?

  
  

  Another bit of info that may be useful is that I am able to run the ADR in stand-alone mode, very well. It does not work through the configuration of Glassfish.
  

  
  

  
  

  Version of REST Data Services Oracle: 3.0.1.177.18.02

  The Oracle Data Services REST server info: GlassFish Server Open Source Edition 4.1

  Kris, nothing goes the server.log after my configuration change. And the good news is that I now know why. The cause is that I used a relative for the configdir parameter path, when I ran the ords.war installation/configuration. I have learned that my problem because I had another instance to compare to.

  Those of you who know, without doubt, imagine using a relative path for the configdir parameter is really bad. Very difficult to solve and maddening to not see the changes you make appear in Glassfish deployment. In any case, I got my debugging information and I get is no longer a 404 error on the page by default non-descript, I see a login page of the Apex generator!

  So the short answer to this particular failure mode is the following, always use a reference absolute path for the configdir parameter!

  Now for the configuration of multiple instances on a Glassfish server...

• Private browsing mode does not work

  I've been without a pc for a while, now have a new with Windows 10. Just downloaded latest Firefox. I put it to always open in private browsing mode. But it does not work. When I close the browser, and then re - opening, my start page is not display the mask or indicate private browsing. I can get it in the usual way, just right-click on the icon that gives you options to open the new window or a private.
  I tried to turn on/off the navigation mode private the several times, still no luck.

  Probably, you won't see the purple mask of private browsing mode when you are in permanent PB mode because all windows are automatically in PB mode.
  You will see the mask when Firefox is started in normal mode and you open a new private window.

  You can use an extension for private browsing mode support tab.

  • Private tab: https://addons.mozilla.org/firefox/addon/private-tab/
  • Private browsing mode tabs get a dotted underline
  • You can enable or disable private browsing mode / disable via the context menu of a tab

• Firefox crashes on startup in normal mode and safe mode does not start reset mode

  using 26.0 FF
  using windows 7 Home premium v 6.1 (last)

  My problems started after the loading of 26.0 FF. If I start FF in normal mode it crashes. Same thing when I boot in safe mode. I close FF (while it's hanging) by clicking on the X in the upper right.

  When I launch FF in safe mode and click Reset FF, it crashes without FF never appear. I have to stop it using the Task Manager. Off mode reset, I can launch FF in normal mode and everything works fine. However, stopping FF does not close it. I have to use the task of the Manager close. Then I'm at square one when you try to start FF, i.e. reset firefox, crashes, Task Manager, stop, then start FF.

  When FF is on, I can open a new window of FF. All my addons are up-to-date. I reinstalled FF 26.0, three or four times.

  I deleted the cache and cookies.

  I scanned for viruses and rootkits etc. with microsoft security essentials and spybot.

  I've been a happy user of FF for over ten years and have never had a problem like this. Any help will be appreciated.

  Thank you!

  I think that I fixed it, it gives a trial because he has started to do this on my two PCs.

  Go to Options > general tab > start switch / "Show a blank page" and the charges of all good. What I used was 'Show my home page' which is the default page of Firefox with the Logo of Fox and history, Favorites and other options at the bottom.

• Qosmio X 875 - ECO mode does not work immediately after Win 8 upgrade

  I used the upgrade Toshiba Upgrade Wizard to Win 8. He succeeded well uninstall the incompatible software before the upgrade and install the new Toshiba and driver versions after the upgrade.

  I activated the ECO mode, and to my surprise, it does not work as before (in Windows 7):

  * Now, it works with the brightness to level 1 *... very dark. Before, ECO mode allowed me to go up to level 4 and was always considered in Eco mode...

  If I increase the brightness, the 'eco mode is disabled' message opens immediately.

  How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?

  BTW, I am owner of a Qosmio X 875

  Post edited by: qosmitto

  > How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?
  Contact your Toshiba authorized service provider in your country.

  Read this:
  + What is the TOSHIBA eco Utility? +
  http://APS2.toshiba-tro.de/KB0/FAQ2503AT0000R01.htm

  > It changes the brightness of the display of level 4, changes the brightness of the grey screen of level 1 (* 4),.
  _The * 4 means only on models with Windows7 installed _

  I guess that the previous configuration was only Win 7.

  8 win was made for mobile (use of the Tablet), the energy consumption of battery is also very important plant help to win 8. The consumption of the battery must be taken at the lowest level possible.
  So I guess that now help win 8 ECO medium mode and save the power max and long battery life time working at a max level.