Long scrolling page and align to the page in the same article

Similar Questions

• Magic mouse does not scroll up and down in the Pages?

  Hi my Mouse 1 Magic suddenly stopped scrolling up and down in the Pages, BUT: it scrolls by always going up and down in Safari and some other programs I've tried like overview and reminders.

  If you are using El Capitan I believe that there is an update of Pages since last October.   Have you downloaded.

  In my view, the current version number with the El Cap is 5.6.   Failure to have done might be the problem.

• Create a page long scrolling pages with distinct url

  Hello all, I just finished rebuilding our site big enough in Muse.  We leave the square space and I was shocked when I learned about the lack of any kind of blog integrated.  I spent the last two days to play with the news FEED and Iframes but I can't all RSS widgets look pretty transparent and I need SEO for Iframes are out.  I have really no experience with the code so I'm at the point where I intend to build the blog in muse as any other page and just use muse to make blog posts, I assume that there are a few disadvantages that people could report?  We have enough long positions, but only a few of them so I don't mind the work, my real concern here is if it's going to hurt the site speed or anything.

  If this stupid idea is actually not as stupid as it is probably and I do actually my problem is the link to a specific blog (mainly for social media), I wonder if anyone has a way that I can make each publishes a page on my site and make my blog page a long scrolling page of these pages , there are some models of square space who seem to do that (is what makes me think it is something) I noticed on some models the URL would change as you scroll to the bottom of the page (square space called the Index pages, but I think that is not what an Index page, I don't know tho) I think anchor points may be the best solution , but if its possible to make each its own poster page it would help a LOT for organization and liaison.

  Please feel free to explain how my idea is bad and why, or better yet give me a impressive alliterative.

  Thanks in advance.

  -Steve

  Why Muse doesn't have Articles?

  I know in the case of Google's B i.e. gets analyzed, but added to the main site (say wordpress for example) and not the Muse which links to it.

  I beleave startpage has the score on the site of Muse, but it's been a while and they could have sold themselves to Google / Microsoft now.

  From the interface point of view user gives its all smooth and in the example of Mr. White , the blog is its website in any way... good luck with it mate.

• Hello. Is it possible to jump to a certain part of a long scrolling page, using 'go to destination', in DPS?

  Hello. Is there a way to jump to a certain part of a long scrolling page, using 'go to destination "?

  Digital Publishing Suite helps | Overlays of hypertext link and button:

  Cles scroll smoothly, you can use decimals or percentages to access a specific position.

  Example: navto://myarticle#3.3 (jumps to a specific position in the article of smooth scrolling that appears at the bottom of page 4 and the top of page 5)

  Neil

• Can I add a new page to both phone and desktop in the same respective location? Is only possible manually?

  It seems that, once you create your phone site, a from there, when I add a new page for a layout or on the other, the command ' Page/go to even ' struggles. Can I create a new page and have it automatically create a page space reserved on the alternative format/site plan?

  Hello

  To respond to your request, I'm afraid that you can't add a new page to both phone and desktop in the same respective location. You must manually do the same thing.

• I can print before and after on the same page?

  Hello world.

  I'm really proud of my editing on a particular image.  I want to print the front and then on the same page, just as I can see the before and after by-side in the mode to develop.

  Is this possible?

  Thanks for your help.

  Yes, but you will need to make a virtual copy by going to the menu:

  Photo > create virtual copy

  Then open the copy 2 in the develop module, and from the history panel, change the setting at the time of importation (usually the bottom of the list) or use the reset button to return to the original camera file.

  You can then select copy 1 & 2 and go to the print module to set up your page with two pictures.

• Audio and video on the same page.

  Is it OK to have a separate audio and video file on the same page?  Both are on AutoPlay without control, but when I try this audio setup crack to override the video, stopping the video a few seconds later.

  I guess I could try and integrate audio into video but if I had not I was not.

  Any suggestion or help is appreciated.

  Thank you

  Ryan.

  You can't play both audio and video at the same time, you will need to merge them.

  Neil

• Form and report on the same page...

  Hello
  
  I want to have a form and report on the same page... as soon as the user enters the information and send the form via the button then the report should be able to display adding...
  
  can I know how to do this...
  
  Thanks in advance

  Hello

  Its simple...

  01. firstly create a page with a region to allow the user to insert records.
  02. it's over then add another region and choose 'Report' and region type and generate a report to show the details of the table above

  Thank you

• can not put cookies and exceptions on the same screen. Need to fix this.

  Went to the options today and the format has changed. Now I can't put Cookies and Exceptions on the same page at the same time. It is vital that I can put together up to manage cookies. Please fix this. Anyone have any ideas?

  You can enable/disable browser.preferences.inContent false on the topic: page config to restore the autonomous Options/preferences window you had in previous versions of Firefox.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.

  Help!  I have an apple mac with windows alongside mac system.  I the have not used for a while and when I logged in the windows system advised me to update to IE 9.  To do this, I had to install Service Pack 2 I did.  He then restarted but cannot install and came up with the following: Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.  I don't know what to do to reopen and to reinstall the Service Pack.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Lack of voice and data at the same time kills me

  After using a treo 750 (WM 6.1) on att for the past three years, I guess I did not realize the advantage of ATT and gsm in general.  There are many drawbacks... mainly pricing for simple accounts (However their family plan was directly comparable to those of sprint).  I constantly try to use data applications while talking on the phone without success.  I started thinking that I could do without, but a week later, I still really really miss.  My wife did too... because she's I usually give directions or any other web information while on the phone.  There is nothing like view google satellite map to help someone make sure they are in the right place... "see a big tree on your right with a large Brown building behind it, Yes, it's that one" does anyone else have this feeling?  WiFi is not an option for me most of the time.

  Voice and data at the same time is not available when using any CDMA network due to network constraints. This is true for all types of phones, not only Palm or not only the Pre. Your example of electronic control or by using google maps, the gps data that can be stored before you activate the call. try to browse the web while making a call and try to go to a web page, you have never visited before, so that you know, that he cannot be a version collected page.

• Detailed form Master in Apex - creating main records and details at the same time

  I m trying to create a master form / retail.
  The master is a simple standard form and below on the same page there is a tabular presentation containing the details.
  
  I am facing a problem when you try to save a new record from the master at the same time with new details.
  If I create a new record of the master and at the same time create detail records for this master (on the same page), when I submit that the foreign key of the details field is not filled in. So only one master record gets inserted into the table and record line is not inserted.
  
  When I have everything first create a master without a detail and edit this master and then add details so everything's allright (since the primary key field is filled out at the time).
  
  I just need to confirm that whether in the APEX form master detail, can save master and line record at the same time or is it as master must be registered the 1 and then line must be enterd and saved?
  
  Please let me know, if this functionality can be achieved in the APEX.

  Hello

  There was an error in the process of pl/sql, you referenced f01 (F01. COUNT) in the loop condition and which should have been f03, also you have assigned the wrong field to what should have been P3_DEPARTMENT_ID

  I fixed that. Also, I'm not 100% sure but I think in order to use the table in the column must be of type text or something (and not hidden), but I can't check now because of lack of time.

  A few mistakes during the presentation, but they are still due to constraints on the other fields.

  FOR I IN 1.APEX_APPLICATION. G_F03. COUNTY

  LOOP

  APEX_APPLICATION. G_F03 (I): =: P3_DEPARTMENT_ID;

  END LOOP;

  Concerning

  Bottom

• How conervert psd to css and pixel-to-pixel measurement and positioning at the same position in dreamveaw

  How conervert psd to css and pixel-to-pixel measurement and positioning at the same position in dreamveawer?

  The basic answer is that you can't.  Graphics program can export your mockup in html format, but the result is so bad that people get to the top of the page of coding manually.

  The easiest way to convert your drawings into a working Web page is starting with models already included in your package CS6.  I advise to read the article by Steph at this link to help you get started quickly:

  http://www.Adobe.com/devnet/Dreamweaver/articles/css_simple_styling.html>

  G/L

• PHP and asp on the same server?

  Just a quicky?

  Can I run both php and asp on the same server?

  Someone has a website produced using asp (don't know about this language) but I would like to use the server it's on and to repeat some of the things using php, retaining only a few pages that use asp, possible or not?

  See you soon

  Operating system

  Hello

  Yes, you can do this (but not on the same page). I recommend you to check with your provider server first however.

  PZ

• USBOTG and Charge at the same time on Stream 8

  To keep this thread as productive as possible and efficient for those who find it useful to:

  Unless you have under your eyes

  1. a schematic representation of the 8 Stream USB port (USB port and battery electric circuit etc.)

  2 source code for the firmware BIOS and kernel that controls the material

  Please DO NOT respond or say "is not possible".  In view of the above is true, you do not have enough information to say '' not possible. ''

  If no one replys with a solution, what he calls not possible by default.

  Also please do not answer to say ' I don't know how "or" but I know how to do anything else that ' is also not that useful.

  An update of the BIOS or other software update may be required by HP, Microsoft or both to offer this feature really intuitive and quite possible.

  And I hope that this thread can be an effort consolidated by all who have the 8 flow to make the necessary changes.  The majority of the other tablet PCs are capable of it.  It seems that only the 8 Stream and a few others have trouble with her.

  ~~~~

  I want the ability to use a simple, inexpensive cable and perhaps standard (with electronic active minimum inside) which allows me to host and to use one or more USB devices on the Stream via its USB port B microphone 8 while this cable can also be connected to a charger standard and charge 8 flow simultaneously.  This means that the cable has a minimum of three connectors.  One of the possible configurations are as follows (apart from the normal charging cable):

  1 cable Micro USB B Male - connect to the stream 8

  2 USB male A - connect to the AC charger (IE one that came with the 8 Stream)

  3. USB A female - one or several connectors to plug into the key of USB data, keyboard, mouse or even a hub.

  Connector # 2. above shall provide a power supply to recharge the 8 Stream via conn. #1 and the power supply for external USB devices via conn. #3 so that they are in use - all at the same time.

  A and if the same cable can act as a normal OTG no charger for when no external power supply is available.  This may necessitate a switch or an electrontics active inside.

  The last part of this goal is unimportant for various reasons.  I wish that HP, the manufacturer of 8 flow, to State in writing good mode necessary to do this, so that other manufacturers or even-it yourself can make maximum use of their tablet HP equipment.

  ~~~~

  The neat thing it will alow a person to do with their tablet, it is to work at home using the Tablet as a desktop PC by connecting a keyboard, mouse, perhaps external screen (with USB to the display adapter) and knit for a long time without time limit prescribed by the battery life because the charger provides energy to all involved.

  If there is only a single connector on the cable #3, then an additional node of coarse had to provide support for these multiple USB devices at the same time.  However, it would be better if there were several #3 connectors integrated in the cable itself.  This would be better as a suitable USB hub also requires its own power.  That an adapter is necessary if the whole thing were integrated into one.

  ~~~~

  I really want answers from anyone who has already accomplished USB OTG delivered with simultaneous load with flow 8. (independent of any published 'proper' way is also welcome)

  Today's date is 2015-01-16.  If in 2015-02-16 (one month), nobody has posted a solution and then starts to bug HP and Microsoft on it's us?

  ~~~~

  Technical training:

  I understand the possibility the tablet software and firmware must take a decision on the manner in which power flows on the power port USB microphone B pins.

  I know that with a proper design of the electronic circuit carring these signals of power inside the Tablet could be sensitive to what is connected and without risk to decide for himself what to do without needing to control software.  For example by testing/detecting periodically differential voltage or current management to see what sides of the connector can supply.

  But this is only one of the many "could bes".

  In addition, this can be no standard regarding the standard USB.  What seems to be actually the case with a lot of cables OTG + fresh, is that physical clues embedded in the cable or charger are used to signal to the Tablet what the situation is.  Then the signal of software/firmware of the Tablet, interprets what the situation is intelligently and responds by flipping the bits of correct hardware control to activate, or deactivate the power flow in the port and also control its direction in or out.

  I'm not familiar with the standard USB.  Maybe I could do more research, if I believed that HP followed with 8 Stream or even the standard covered this situation explicitly.

  But to a certain extent, it seems I'll have to invent something that should be intuitively just like it does with other tablets. Isn't it?  Maybe I'm overthinking, but I can't find any USB OTG + cables load that specify compatibility with 8 HP flow.

  In any case, I was familiar with both methods other use of tablets to send the highest mentioned signal to the hardware/firmware/software of the tablet to the idea that it's time to load / time of OTG or both.

  The first method is a 0 Ohm to 200 ohms short between pin USB A 2 and 3.  This is the bidirectional data differential lines D - and D + respectively.  In data mode, all the data passes back and forth on those lines.  When you load with a cable, it's the charger module that puts this short, not on the cable.  I measured the short on three different Chargers.  It is 0 Ohms on two of them, one of those who are the charger that came with the 8 HP flow.  The others 0 ohms was generic.  The third was for an apple iPad and it measured on 53KOhms.  It's probably not the resistance ohms 0-200, but probably it is impedance termination indicating that there is some intelligent serial port communication in the charger itself.  Leave it to Apple to be different.

  This method is somewhat questionable, as this signaling mode would prevent OTG + fee because it seems unlikely that you will be able to OTG when the data lines are shorted each and overloaded with such low impedance.  I could be wrong on this subject...

  The other method I have seen suggested to work with some tablets and phones other than the 8 stream is too short the USB microphone B pin 5 to Terminal 4 with 0 Ohms to 100 000 Ohms.

  USB B has 5 pins.  USB has only 4.  The extra pin on B moves the GND pin 4 pin 5 pin to and makes pin 4 PIN ID.

  If this signal applies to a drop in the ID pin (4) or in some cases, I saw that she proposed, he runs down with 0 Ohms.

  Dead shorting things always makes me nervous.  If ID is a simple normally high impedance high input, resistance could be used to make voltage well below the low or zero threshold while also preventing the risk of damage when cheat on him with a device that you do not have the diagram for.

  Yet, 100K is a bit high for a 'pull down' in most of the situations that I'm used to.  Even a 10K would be uncertain. A 1 K or 2 K seems reliable enough, but then things are weaker and in know more nowadays low...   All but a dead short but if possible.

  So, it seems possible that the device might be able to "indicate" by the specific value of the resistance, which can be found here.  In other words the resistance is not a pull down but in fact a signature analog ID, in which case the exact value will be crucial. So if this is the case, a guess is not going to work.

  Obviously in such a system as described above, a chip inside the Stream 8 should be responsible to support this information. I hope the 8 Stream has such a chip.

  Probably a register inside this chip would be at all times what the State of the pin ID is a binary number.  All that is needed is for the BIOS to the chip and the registry in it and read this number via the bus to determine what happens to the port. Finally, he would use that signals of info to send the order of material to the electrontics of power set the appropriate direction to take etc.  (and change the State of the icon on the screen of the rude)

  I don't know if the PIN ID method described is a standard USB or not either.

  Eventually, there may be a third way. But I do not suspect that it would be possible with a non-active external device. In any case too complicated for the novice DIY for sure.

  The device would need to act is a kind of extension of bus.  As an active hub.  But she would use the negotiation of data USB serial lines and in addition to reproduce one or more additional USB ports, intelligently inform the tablet to get with the program which is "now we're going to otg and recharge at the same time."

  This requires a smart external device with a processor Inside, no doubt.

  It seems to me that many other tablets have been able achieve avecjoint here the need for a smart external device and thus the flow must also be able to do.

  There is a device that claims to be able to work with the HP Jet 7 and 8 and provides same ethernet and USB and big DVI ports so loads the data stream.  But its expensive because it is active.  Se here:

  http://AMZN.com/B00OVDE0GC

  It's called a "Docking Station".

  A reference to a product that does exactly what I want (possibly without active electronic components) is here:

  http://AMZN.com/B00LTHBCNM

  It's by Kirin and it is a device of type squid with four USB ports.  Precisely, which is my goal.  But read in the comments stream 7 user indicated that he would not be OTG and load, not really clear if it worked as a hub USB OTG or not.  Another evaluator stated that she would not support even a single USB device much less fees of 8 Stream.  This device has a switch.

  I forgot to mention that some 'hackers' have claimed success with other tablets to deceive their devices by using a multi-step process to plug things in.  Usually in general they would get connected Tablet and load first, then they would return a switch or something remove some resistance or the signal was introduced by the first position of the switch. For some reason any Tablet would continue to require. Then the data lines would be free and they would plug in a usb key and it mounts correctly even if the tablet was always in charge.

  It's like the power circuit has a lock which does not allow it to return to the mode "power flow" as long as he still feels the power flows inward regardless of what software it is telling.  Full proposal here.

  These tips seem dubious to me.  Changes in the BIOS could change the way it works.  Also you can not be sure what actually happens if you do not have a schematic representation.  You could damage your tablet.  Many people will support icon in the operating system whether the Tablet is in charge.  But I'm sort of a low-risk guy and my policy is generally indicators of intereperet not to have meaning at all once a device is functioning in a non-standard setting.  Especially when it's something that I did not built and could not fix if I FRY.

  Hypothetical reasoning: tell me what data sensory discs really the State of the charging light screen?  This reflect the bit of hardware control programs actually feeding management and status on the port?  Or does it measure the direction of the flow of power, said in the section of the circuit battery monitoring?  Point - none of us have a schema because it's owner. To really be sure according to the smart electronic hardware, the port must be mode flow under advisement "of power. If it's in a "power flow out" mode and power will be delivered externally as well you wind upward with both power supplies the same power at the wheel nets.  In this case, the two opposing regulators attempting both to drive 5 V can have slightly different voltage calibrations.  That could lead to fighting between them, with more than 100% of their capacity.  For example if you try to regulate 4.95 real V and the other and other attempts to regulate 5.05 V.  Current then flows to the tune of 100 mV / a few milliohms in the cables linking the two.  This may be several amperes. (many)  In other words, like I said: you want the tablet to know that power is coming in don't go out and automatically hitting the internal switches needed for that to happen. Probably the icon should indicate this with precision, but in some wacky situation, he could not. There may be a chance that the icon could indicate the load and still be burning or focusing on some circuits of the tablet or the charger.

  Another thing, I could see that happening is if you play with these reported resistance types enough you might find a resistance value that winds up place the device in an intermittent condition.  In other words it keeps flipping back and forth quickly between OTG and fresh.  It can give the illusion that it works.  You can have marginal communication with your USB devices and battery could even load.  But will still be a lot of stress on the power circuit.

  It is difficult for me to risk a Tablet perfectly well if I don't know exactly what I'm doing.

  If a brave individual makes their own experimentation and verifies that it charges and OTGs and you tell the rest of us, you're a hero.

  Maybe one of you has a good knowledge on the USB standard to have more confidence in such an experience... like what the ID pin 4 REALLY supposed to work for example?

  That's what I know so far.  If you think you can help, thanks in advance, or if this helped you, then your quite welcome.

  It works

  http://Accessories.us.Dell.com/SNA/ProductDetail.aspx?c=us & l = to & CS = 19 & SKU = 470-abes & baynote_bnrank = 0 & baynote_irrank = 0 & ~ CK = baynoteSearch & dgc = CJ & cid = 47997 & lid = 4279734 & acd = 10550055-4485850-eb75dcb47e53437680ed323a1f4885fe

  Evidence

  http://targusblog.com/2014/11/25/how-to-turn-a-99-Tablet-into-a-workstation/

  But it's 4 x the price in Europe

  Have fun