Long Shot of scripts for Server organization - help?

Similar Questions

• Long shot - driver SATA for Pavilion 15-n048ca

  Hello

  Here's a question long shot re drivers.

  I recently bought a HP Pavilion 15-n048ca that came with 8 Win. I have a material more elder who has no new drivers for this OS. And win 8 does not come with an XP as Win 7 compatibility mode.

  So I try to install XP Pro in another partition on the same system (multiboot).

  (Yes, I know that XP is about to be "end-of-life" and will not get updates in the future, etc, etc, etc. - been thru all this.) Where my rush to try to get a stable installation before the 8 Apr.)

  As you probably know, XP does not know about the AHCI SATA drivers (even though I think that if I had bought an XP with SP3 installation disc, it could have on it, but still not be compatible with my h/w). But my original XP disk doesn't know anything about. And the BIOS is not an option to change the HARD drive in the UEFI IDE compatibility mode, but it does not allow the boot Legacy mode - very limited.

  I can create a new "slipstreaming" of the OS installation disc, the SP3 and the new drivers - if I can find something suitable.

  The AMD hardware ID are:

  PCI\\VEN_1022 & DEV7804 & SUBSYS_216B103C & REV_00

  PCI\\VEN_1022 & DEV7804 & SUBSYS_216B103C

  PCI\\VEN_1022 & DEV7804 & CC_010601

  PCI\\VEN_1022 & DEV7804 & CC_0106

  I know there is no XP drivers for this hardware. But AMD has in common in a generation (or two) of material, which CAN (and it's a pretty big "IF") allow the use of another pilot, because there's a version of XP.

  Is there something that can work for this system?

  CPU_Z reports of material such as:

  CPU/APU: A8 - 5545M with Radeon HD 8510 G graphics card

  Motherboard HP: 216 b

  Chipset: AMD K15 BMI Rev 00

  Southbridge: AMD A55/A60M Rev 11

  I know that another option is to create a virtual machine and install XP it contains. I do not know the h/s that I want to connect will work, but I'll also give that a try using VirtualBox.

  I'd appreciate any help you can provide.

  see you soon

  Any type of CPU is the computer, which is used to create the XP SP3 slipstreamed CD. With the help of nLite, all you have to do is;

  (1) make an ISO of Windows XP CD and place it on the desktop.

  (2) download Windows XP SP3.

  (3) download and extract the AMD SATA / RAID drivers according to the instructions of Daniel.

  (4) run nLite and integrate the SP3 and AMD drivers.

  (5) create the new ISO.

  (6) burn the new CD of Windows XP SP3.

  Based on Windows and GPT FAQ, it is unlikely that XP will be installed on a GPT disk. Most likely, you will need to partition the drive in the MBR before installing XP. This means that you must also reinstall Windows 8, but you will not be able to use the support of HP recovery, you have created.

  Microsoft requires the leading manufacturers quantify and integrate the product key Windows 8 in the BIOS/CMOS. It's called a digital product key (DPK). You can try this download of Windows 8 OEM;

  http://www.Google.com/URL?SA=t & RCT = j & q = en_windows_8_x64_dvd_915440.ISO & source = Web & CD = 1 & CAD = AJLN SQI = 2...

  It is a copy of Windows 8 OEM officially licensed and will also install Windows 8 Pro OEM. Download this file, burn it to a DVD, the start of this drive and install Windows 8. It should register as an official copy and use the key embedded in the BIOS.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Can't get into hotmail for two days - HELP! Says: Server error

  For the last two days when I try to log into my hotmail account it appears

  In the Application Server error ' / '. Runtime Error Description: An application error occurred on the server. The current settings of error customized for this application prevent the details of the error in the application being viewed remotely (for security reasons). It could, however, be read by browsers running on the local server computer.  Details: To enable the details of this error message specific either visible on remote machines, please create a tag in a "web.config" configuration file located in the root directory of the current web application. This tag should have its attribute of 'mode' on 'Off '.                     Notes: the current error page you see may be replaced by a custom error page by modifying the "defaultRedirect" of an application attribute tag configuration to point to a custom error page URL.                    

  That is a mistake is? When it will be fixed? I was not able to get email for two days - HELP! (and thanks!)

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

   

• Can someone help me to write a script for Soundbooth

  If I have 50 files in C:\MyMusic and you want to

  Game Volume in Soundbooth CS5 how can I write a script for this?

  The only other way that I saw him do this with a library of that size is by Steve DeKorte SoundConverter. It would be tedious to do, but there is a feature to "normalize volume" on all files being converted. E than another inconvenience is that as long as you "convert" MP3 to MP3, you must save the files "converted" to a different directory. It won't crush during the standardization process.

  I had a library of more than 92 000 songs in 14 000 folders and subfolders 46 000 until last October. I had been there twice to "clean up and mormalize ' it more than six years." The transport entered on the drive that I was preparing to back up everything on DVD, and I have been unable to recover the data on the disks when it happened. I was duly upset when I lost all this music, but as I look back over the last eight months, I had a lot less worries ' tinkering ' with all these files all the time.

• Need help to create a Script for the labelling of Finder of Indesign files

  Try to find a way to have a script run in InDesign CS4, who tagged a RED text file once it's been imported into InDesign.

  Import multiple text files in an InDesign template. Since there are several text files in the same folder, it must somehow 'delineate' that we have imported this file and move to the next import. I created a 'service' with a keyboard shortcut Automator to label the Red file in the finder, but it would be great if we could have this occurs automatically after we imported in InDesign.

  If import us the text wrong by accident and it gets missed in fermentation, it costs us a lot of money with the printer.

  Thanks for all the ideas.

  Jim

  At its heart, it's what you want to do.

  tell application "Adobe InDesign CS4"
       set placeFile to choose file
       tell active document
            tell selection
                 --Assumes you have preselected the picture or textbox to place file in
                 place placeFile
            end tell
       end tell
  end tell
  tell application "Finder"
       set label index of placeFile to 2
  end tell
  

  You can expand on it pretty easily. The script for InDesign dictionary must be in the Library palette in the Applescript editor and the docs for Applescript are all online.

  If you need further assistance, you may wish to ask someone to write a complete script for you to spec for real moneyz.

  Best o ' luck!

  Eric.

• Need to automate import/export or backup bookmarks for an organization

  I work in it for a (business) medium sized organization. I need a way to export and export bookmarks for all my users and I need it in a way that is automated or CLI (babysitting 100 + laptops and import in person are not an option). We transfer users to the new laptops in three weeks, but we need this feature to exist later too (so we can build something to automate backups of bookmark and restore with our internal network). We use Zenworks to work, but we have other options of script too.

  Any link I found on the command line options to run Firefox with other tools does not allow me to do what I need (that is, I have a way to export to a html element, but it is important do not; - switch migration gives me a GUI). All the resources that I found on Firefox command line arguments are not consistent and not clear on what the options work with which version. As such, I don't even know if options exist which would really help.

  Due to security issues, running a plugin or off-site storage favorite's options.

  I found the existence of profiles.ini and was able to write a script (beats windows cmd - God help me) to get out of this directory is created for the profile and then copy the files on the user's network drive. I also wrote one to copy a disc on their new profile user network. At this point, the problem I encounter is that firefox does not use the file most recent bookmark - < date > .json who gets slapped in the directory. Something else must refer to what bookmark file name to use. Hoping that there is something in the registry or in a plain text, not a sqllite db file, otherwise I am bit watered.

  I guess my question is the following... is there not an easier way to do this, or a command line option (firefox) to do what I need?

  Instead, someone has an idea of how I can tell firefox to use a specific bookmark to begin with, or the newest one in the directory profile? Once, it should be hands-off. This isn't a solution for one person.

  And third, if there is no answer to my first question, my question to the developers of Firefox is "why is this omitted basic functionality"? In my opinion, it is obvious and quite serious, I'd be willing to call a bug. Many others have the same problem. (If I don't get a viable solution for the first two questions, I'll follow with it in a more appropriate forum or email...)

  Thank you people, you really helped my pull together a solution! I think that this solution will be fine for now (I'm under these .bat files as long as the user, no system or an administrator.) I am Deploying via Zenworks, if there is more than one title to skin this cat...

  For exports that I did a file named override.ini I put it in c:\program files (x 86) \mozilla firefox\ that it contains:

  • [XRE]
  • EnableProfileMigrator = false

  ... I needed to do it because I didn't want the GUI to auto import on a first run (turns me off, no matter that it is actually necessary or not in this case).

  Beats my export file for XP (because of goto:EOF, you must run cmd.exe for this one with / x):

  • Set copycmd = / y
  • c:
  • If not exist them "%userprofile%\application data\mozilla\firefox\profiles.ini" goto:EOF
  • CD "%userprofile%\application data\mozilla\firefox\.
  • for /f "tokens = 1, 2 delims = /" % in (' findstr/l ".default" profiles.ini") together called var1 = %% j
  • CD profiles\%var1%
  • otherwise there is h:\backupbookmarks (mkdir H:\backupbookmarks)
  • copy H:\backupbookmarks places.sqlite

  My .bat import for Windows 7 file:

  • Set copycmd = / y
  • Start "browser" /d "C:\Program Files (x 86) \Mozilla Firefox" firefox.exe
  • time-out period 7
  • c:
  • CD %userprofile%\AppData\Roaming\Mozilla\Firefox\
  • for /f "tokens = 1, 2 delims = /" % in (' findstr/l ".default" profiles.ini") together called var1 = %% j
  • CD profiles\%var1%
  • If exist h:\backupbookmarks\places.sqlite copy h:\backupbookmarks\places.sqlite

  Hope that helps someone else out there. I did similar scripts for Chrome and Safari too, so I should really this post on my blog... will have to start a blog that is not only Linux, though!

• Sharing of Scripts for pattern recognition

  Hi all

  I need to use the same script for .sdp projects.

  Anyone know how we could do it?

  Thanks in advance!

  It's a called Winwrap basic form, he has his own website https://www.winwrap.com/web2/doc-basic/ which is a useful reference.  MS COM has long been replaced by .NET but of Windows COM objects can be created using Visual Basic or C++ - there's probably a way to use .NET and assemblies, I simply never need a functiont complex enough to require an object. You are showing the references, they are listed in the registry of Windows OCX/DLL objects. Suppose you want to do a database search you would add the ADO MS Library and you can then create connection and recordset objects in the script and access to a database.

  It would be useful to know what's on your WFR project because the AP has a huge layer of script development located above the capabilities of the base product. If you use an AP project, it is wiser to change except the prescribed manner and the code is secured by password, so you can not access it. If you are lost at this level of knowledge then you will find configuration and the use of the BDUS a 3D maze, better get help from companies that specialize in the JAR

• Script for the mandatory boxes

  Recently I've been editing a PDF file with checkboxes for the steps in a process. Basically, these just will be used when going through the process to check off each step individual as long as the user goes along. There was a high requirement to prevent the checkboxes of the audit until the previous one has been checked. So box 2 cannot be controlled until the box 1 have been verified, and 3 cannot be controlled until 2 is checked etc.

  Does anyone could offer some advice on a script for this? My knowledge of scripting languages is quite limited, so any help would be greatly appreciated! Thank you.

  Thanks for all the help.

  I finally managed to find a piece of code that shows the next box hidden but also hide the check box, so that from before is not checked. Here's the code I used just in case anyone is interested.

  var nHide = event.target.isBoxChecked (0)? display.visable:display.hidden;

  this.getField("Check_Box2").display = nHide;

  Once again thanks for the help.

  -James

• Several small issues, no doubt easy for you, difficult for me! Help! :) link provided

  * Many thanks to KEN so far!

  Mods: can delete nicely related first post

  So here I am: SITE!
  (DW CC)

  I'm married to this model, if while I appreciate all the advice against it, I need to to its glorious end I go nuts and now a deadline.

  Here's what I messed up with for a week with little success. I really feel I have tried everything. Felt crazy several times.

  -for background images to display in their entirety! Cut, can't scroll to see all this.

  -to be able to move the white translucent content area ("blob")... but it remains right + centered vertically. Also, I'd be happy if I could just move its position on the home page.

  -for the 'blob' to stay put where I want it to be, as well as the menu and other objects

  -want each page to have its own url (/, / author, etc.), but with the sliding content blob still work (if possible)

  -for the menu to stay in place and be centered... I got close enough, but it is not perfect, and it moves also when resizing... want it fixed in one place

  -to add a slideshow on the page of the snippet (there is code for it, but I don't know if you'll be able to see it because it doesn't have its own page) I was playing with it in vain: Slideshow HTML

  I want everything must be static and functional (menu, 'blob', background) to keep a consistent look.

  I thank very you MUCH for your time guys! I need help!

  t

  -Recommendations for adding a coil simple slideshow/photo /.

  Look at jQuery Cycle2, Cycle2 demos.

  on getting the box to slide in and out at the time to choose a new menu item

  I do not recommend your site like this.  I'm not a big fan of page 1 sites.   If JavaScript is disabled, menus will not do anything, the content is not displayed.  About 5% of users have no script for security reasons. This could cause problems of great conviviality.  I think that it is better to build your site with web pages instead of 1 long AJAX/JSON driven page.   You get more traction with search engines if you have several web pages with unique page titles.   And generate traffic to websites in the search engines.

  You PM'd me on different background images.  This is easily possible using the CSS code integrated on your internal site pages and changing the property background for use to a different URL.

  Would like to know how to break the text up into columns within the content boxes
  

  Columns CSS explained:

  http://CSS-tricks.com/Almanac/properties/c/columns/

  Nancy O.

• Script for updating VMware ESXi 3.5 VMS - Windows tools

  Hello

  We have ESXi 3.5 in which we have windows and Linux server hosted virtual machines.

  Is it possible to update the Windows VMs VMtools through any script?

  We have our server VC VI toolkit 1.0

  Well, if that's the case then its as simple as the following:

  SE connect-viserver 'MyVIServer '.

  Get-VMHost "myhost.mydomain.com". Get - vm | Update-Tools

  If you found this information useful, please consider the allocation of points for correct or helpful.

  Alan Renouf

  http://virtual.NET

• Scripts for process Planner

  Hello
  
  Does anyone have scripts for sending a Message If the process scheduler does not start under Windows?
  I wrote a script on the UNIX server that sends an e-mail if there is an error or if the programmers of process down. Cron job runs the script to check the status of the process scheduler.
  
  I used to look in Task Manager whether or not services are running on Windows. I never wrote a script to watch the Process Scheduler Services on Windows.
  
  I'm looking for a script that sends an email when ever process developers running on Windows GO DOWN or SHUTS DOWN or do not start correctly.
  
  Any help would be appreciated.
  
  Thank you
  Chris
  
  Published by: user7384419 on April 15, 2009 08:17
  
  Y at - it an equivalent for ' PS - ef | grep"on windows 2000

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896682.aspx
  and/or
  http://www.jigsawboys.com/2007/02/21/script-to-check-if-a-Windows-service-is-running-and-email-a-user-if-it-is-not/

  Nicolas.

• Mode script for ANY c ++ function

  Hi all

  My goal was to use the pxi 5406 to implement features of frequency sweep. Right now, we use only the functions on the list of the frequencies of creation. There are four modes of release for the frequency list, signle, continuous, step by step and burst. We use the bleachers through fashion. It is painful to use this mode, since for each frequency, you need to send a rising edge, so if I have several hundred, it means I have to produce this amount of rising edges. This will generate a lot of buffer in another analog card.

  My question is, could I use script for the frequency list view? Or is there a smart way to achieve this? From the file of signal aid, he said that there are some c programe on script mode. But I can't find any examples in my computer. If you have any other, could you send me?

  Thank you very much.
  .

  Yami.

  Yami,

  The 5406 has the ability to run script mode. Only for her output modes are Standard function and frequency list. However, I believe that you can do what you want to do with the list mode frequencies. Assuming that you do not want to trigger you can put the camera in single or continuous Mode. Single will play your select frequency scan and then once completed, build:

  

  Continuous is similar, but you continue to repeat the signals to stop:

  

  All the above details are in aid of signal generators of NOR. I looked under the heading devices > 5406 > trigger > triggering Modes.

  With simple or continuous, you can specify the length of the waveform step, which could be a good starting point. With regard to the examples for c ++, I do not have, but if you look in the Start Menu, NOR-FGEN, National Instruments, examples, OR-FGEN C examples you can find a folder for "Sweep generator", there is a model and an example C you can look over your program after. I hope this helps!

• Error when you try to play multimedia files: Windows Media Player has encountered a problem while playing the file. For any additional help, click Help on the Web

  ERROR: Windows Media Player encountered a problem while playing the file. For any additional help, click Help on the Web.

  I get the error Windows Media Player 11.0.6001.7007.  "Windows Media Player encountered a problem while playing the file. For any additional help, click Help on the Web frequently. "What happens on the music or video files even those I had on my PC for a long time.  They work some days and other days they don't.  I have to reboot to clear it and it's really annoying. I can read a file and then 10 minutes later the same file will not play.  Sometimes after the error message, if I don't click Close, the video is not yet but the audio will not.

  I'm on a laptop HP DV5 with vista 32-bit and 4 GB memory such that shipped HP (Yes, 4 concerts and 32-bit).

  I don't know if it was related, but IE7 would continually fail to open, click on through the windows and should be completely closed.  essentially the WMV and IE are fails miserably on this laptop, and it was only 6 months old.  Firefox fixes my problem of browser.

  How can I fix this WMV as I can't UN/reinstall with Vista?

  I ran sfc/scannow after completion of the analysis, the results were that "windows resource protection finds corrupted but files could not solve some of them" gives then refers to where the cbs.log file is located. I tried to open the cbs log, and he says that access is denied.

  UPDATE: there seems to be a conflict between WMP and any other application that opens which can play the video with sound.  When I close firefox, and then the videos and sound can play (these same questions happened on IE7 and firefox was installed just yesterday).  I met the same problem with more than Pinnacle video editing software.  Is it possible to change a parameter with WMP as there is no sharing violation during a different application can play the video?

  SO thanks a lot!    I had to use the following steps to get your simple solution:

  1. Select Options under the button 'SYNC '.

  2. choose 'other Options '.

  3. click on the tab 'network '.

  4. only check box RTSP/TCP and HTTP and Multicast Streams allow the player Pourrecevoirun multicast stream (which meant I had to uncheck "RSTP/UDP"

  5. click on apply and take advantage of my windows media player.

  Thanks a lot wmd_user!

• Can I use the clip for a not for profit organizations logo?

  I am the Secretary of our local pony club and that we're not for profit organization and no funds were little I was wondering if we can use the clipart for our logo images. They would appear on t-shirts, hats, brochures and the fixed overhead... I read the above but instead of going and reading of the huge document on the copyright laws, I thought that I would ask here first.
  Thanks in advance for your answers.
  Chenoa

  Hello

  It really depends on who has the copyright and their wishes. There are several clip art images
  in the public domain.

  Here are a few.

  Public domain clip art.
  http://www.pdclipart.org/

  http://www.WPClipart.com/

  http://openclipart.org/tags/public%20domain

  http://openclipart.org/

  More can be found usng Bing or Google.

  If this is not the case in the public domain then you need to know the law and to check with the owner of the copyright.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Scripts for data cleansing Perf

  Hello

  We currently use BB 4.4 with the new features enabled PERF. Someone at - it scripts for cleaning or truncate the Perf Data collected? 4.5 is supposed to have the function programmed in. We run the BB server on unix.

  Perf Data under the $BBHOME / bbvar / perf

  The files are in plain text with lines like this:

  Here is a not so elegant way to truncate your files in perl. You will need to set the time as a unix timestamp.

  #Purge $BBPERF
  @files = "grep - Rl. $BBPERF / *';"

  $file (@files) {} foreach
  chomp ($file);
  Print "$file\n";
  @data ='cat $file | AWK ' {if (\$4 > = $startTime) {print \$0}} ";
  If (!) () open (FILE, "> $file"))) {print "cannot open $file: $!"} \n » ; print LOGFILE "cannot open $file: $! \n » ; next ;}
  foreach $line (@data) {print FILE $line ;}
  Close the FILE;
  }