HP deskjet all-in-one 2545: Troubleshooting Wireless direct with HP2545 with printer all in one

Similar Questions

• Mac cannot establish a wireless connection with printer

  I recently bought a HP ENVY 5530 printer to use in my home network. I took it successfully up to 2 Macbooks and the installer worked for about a week.  All of a sudden, no computer can connect to the printer. Laptops use OS X 10.6.8 and other 10.9.5.

  I started in case of reset problem, printing systems, repair disk permissions and then uninstalled and reinstalled the printer software. still no luck. The results of the test the State of 5530 wireless network found no problems and it is connected to the correct network. Laptops are on the correct network as well. Laptops don't seem to be able to "see" the printer.

  Where should I go from here?

  Hi @0okm ,.

  Thank you for visiting the Forums HP's Support and welcome. Thanks for the detailed information he is appreciated.

  Looks like you all did for the printer HP ENVY 5530 and your Mac to resolve wireless printing.

  Try this fix for the router, because it seems that it is the last thing to do.

  Disconnect the power supply to your router and modem and turn off your Mac
  Wait at least 45 seconds.
  Plug in the modem and wait for it to come back online.
  Plug in the router and wait for it to come back online.
  Turn on your Mac and try to install it again.

  If this does not solve your problem here is a document on setting up the printer HP with a Mac.

  Please let me know how it goes.

  Thank you.

• HP deskjet all-in-one 3632: problems to make eprint to work

  OK, I'm having a problem making the printer to connect to the internet.

  I have a static IP address on my ISP.   I have 1 n600 Router 2 broadcasting networks.  1 5 g and 2 1. 4 g.   I used void net default 192.168.1.1 and 255.255.255.0.   This router I have a win 7 64 home computer hard wired. I also have a hard wired my Office Access point. the access point also broadcast a GIS of different 2.4 g.  all the sig.s wireless use wap2 Protocol and b/g catch up mode. and the names of all different but same network total network, if that makes sense.  OK, I have a total of 4 more also attached computer too either or network win7 32 ultimate win 7 64 and win vista 32. 2 tablets and 3 IH smrt 5.01 lolipop android running.  I have 2 security cams that have a static for IP and port forwarding on them.  everything works fine.  all computers are part of the same private network hmegroup.  I assigned a static ip address for printer dhcp table.  I can print from any device at any time via wifi.  NOW HERE'S THE PROBLEM.  whenever I go to the WEB form, he is saying that its not active all the check boxes and I don't know what a proxy server is but I know that I have not installed on this network so I click No proxy server.  The PRINTER SAYS UNABLE to CONNECT to the INTERNET.  every time that I tried about 20 this weekend.  It says to check the dns, gateway, blah blah blah.  so the DNS are correct and it shows not 192.168.1.1 as the gateway.  He also btw autodetected it correctly.  so when it fails to connect, I click on web print report. I get the page "get the most out of your printer.  and then a white page. and that's all.  at the top of the page to "get the most out of your printer" it says in "BOLD", "your printer is not connected to a network" which is BS do see on every device and every computer wireless or hard-wire. and I open it a new browser window using 192.168.1.143 which is the static ip address for this printer and bam. It opens right.

  When have I forgotten?  can I configure the gateway as the ip of the real gateway side the ISP of my router.   Im a little aggravated because the only reason why I got this printer from walmart that the PHN android already had the makings of plugin hp on them and I don't like HP is cause of all the fluff sofware that comes with them.  I almost had a gun, but they seem fragile and plasticy more than this one does.  so as I said work is expected for printing on the web.  I tried to press the eprint button and it flashes a little and nothing. I pressed it and the 'i' button and nothing ever prints other than the above page.  I have reset to the default values and done everything as configuration 2 x.

  If anyone can help, I would be very happy.

  facorbin

  Hey @Facorbin,

  Welcome to the Forum from HP Support.

  I see that you are unable to activate the webservices in the all-in-one printer HP Deskjet 3632. I want to help you with this. I have some suggestions that might help.

  I recommend you try the following steps:

  • Enter the IP address in a web browser , and press Enter to go directly to this page. This should take you to your built-in Web server (EWS) printer.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.
  • Note that menu above EWS items can vary in overall models of printers. If you do not see the exact topics that I've listed here, the subtopic you should always appear on the Networking tab.

  If this goes through successfully, try to activate the web services () again. If you're still coming up short after this point, I recommend you enable DMZ mode in EWS your router, manually add the IP address of your printer. (Based on the level of detail, I suppose you're a statement you know what that means). After completing this step try to enable Web services one last time. Success?

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem and that you liked this post, feel free to express your thanks by clicking the "Thumbs Up" icon below by clicking on "Accept as Solution" (this will help others find the solution).

  Thanks for posting in the Forum from HP Support.

  Have a great day!

• HP Deskjet All in one printer model F4280

  I am running VISTA 32 bit OS, and I have a HP Deskjet all in one printer model F4280. After having updated the software and the drivers from the HP website. Printer is on and I connected all the cables ensuring that all are in good working condition.

  I plug the printer by USB connection in my laptop and everytime I try to print anything from any program, including internet explorer 9, he brings just a notice saying ' Explorer crashed and stops.

  Can someone help me?

   

  Hello

  1. What is the exact error message?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).

  Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).  Always before A.
  Under Vista, updated on an HP laptop.
  Already checked for printer is installed and works properly and for updates of device driver and the computer restarted.
  Help?

  But... not the same question... the next Document in HP
  maybe worth a visit:

  HP printers - Scan button on the
  Printer does not work properly when
  the printer is connected to a Windows
  Vista computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809848&LC=en&cc=us&DLC=en&product=303756&rule=23585

  You may be able to find additional documents to the service the customer of HP:
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en and... It may be interesting to try to uninstall/reinstall the drivers of all-in-One.

  Also... If it is a recent issue, it may be interesting to try to make a system
  Restoration of some time before he started.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Good luck...

• HP Deskjet All in One 3545: printing problems

  1 shows low ink icon. A left less, just half. Thought b & w cartridge is low. Ordered and this has changed. Print an alignment page. During the printing of new document, new alignment message came. Returned and gave the print order. Print a faint fary. Check the ink level. Right and left less. Stop printing. What needs to be done?

  2. when the printer is on, sound of NEEQ move is not smooth, little stumble.

  3. If put more than one paper in the tray, all are drawn in and then deported without no printing. Even place a paper displays the message that says to remove the paper and place it again in the status bar.

  4 visit to a mechanic charges are prohibitive.

  5. help online?

  6 resets useful?

  7 printer is in mode (wi - fi) network

  Hey @Achyut18,

  I understand that you have some problems with the printing of your Deskjet Ink Advantage 3545 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once it's done this document describes How to solve print quality problems with your printer. If after completing the document, you still have problems with print quality, then the cartridge will need to be replaced. Please find below the link to contact HP support.

  It seems that you may have had a problem with collection of paper in the printer. This document explains How to solve problems of choice. If after completing this coument you are still experiencing problems with pulling on the paper then the printer will need to be replaced. Please find below the link to contact HP support.

  If you are looking for other support options, from real cartridges not refilled to replace, or if the printer needs to be replaced so you can contact HP support directly by clicking here and filling out the form below.

  I hope this helps with your problems and I hope you have a great week!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• DeskJet 3050 is connected wireless but does not actually print

  Hello
  I have a Deskjet 3050 All in One Printer - j610a and I run on Mac OS x 10.9.

  I did a software update and have managed to connect the printer to my wireless network. I know that for some of my wireless network from your report print on which not only says I'm fully connected to my network, but also that I have no problem found on my connection.

  I know that my computer is connected to the same network and I added my printer to the printer list.

  Problem:

  When I go to print something from my Mac, I select my Deskjet and click on print. In fact, he says it's printing and it has printed, but nothing is in fact!

  I get no error message and what I'm looking for in says me I'm connected.

  Just nothing really going to except what I can print directly from the printer to the diagnostic reports.

  This printer used to work perfectly, but then I moved and had to put in place all over again and now what's happening!

  Help!

  I do not know how to show that this has been resolved, but somehow, it fixed itself after that I just let a little rest and then added the printer to my computer.

• DeskJet 3511 change from usb to wireless

  I'm moving my printer all-in-one Deskjet 3511 of wireless USB to one. I use on my Mac OS X Mavericks and the access point for my network is an AirPort Express Terminal, if that makes a difference. I tried to use the Setup Wizard, the application of configuration easy wireless, etc and nothing has worked yet. I don't know if I have previously configured something I forgot and need to reset the printer to factory settings or if there is something other that I'm missing (which is not unlikely).

  Hi kitkatkaiti,

  I understand that you cannot set up the printer on the wireless network. I can help you today.

  Print a configuration page to see if it provides the SSID or the IP address of the printer.

  Printing a Network Setup Page.

  You can restore the default settings of network on the printer.

  Go to the configuration, the wireless menu, select restore defaults, Yes.

  First, check the encryption and password for the network.

  To check the encryption type:
  In the Apple menu, click on Go, selection of applications, utilities, Keychain Access, on the left side, click on passwords, double-click the name of the network, check the show the password box, type your Mac password to see.

  To check the network password:
  In the Apple menu, click on Go, selection of applications, utilities, Keychain Access, on the left side, click on passwords, double-click the name of the network, check the show the password box, type your Mac password to see.

  Try the printer configuration using this method:

  Turn it on wireless Direct.

  Go to the configuration menu wireless, direct and turn it on.

  Go to the airport and connect to the network printer.

  Then, type 192.168.223.1 in the address bar of Safari.
  It will load: the printer server Web part, click the network tab, select Setup wireless on the left.

  Fill in all your information. Apply the settings.

  Reconnect your network name.

  Then add the printer on the Mac, because the software is already installed.

  Click on the Apple menu and then click on System Preferences.
  Scanners & printers, then click the plus sign +.

  Select the printer in the list. (Make sure that the printer is listed beside the use: displays the name of the correct printer and not Airprint) Click the Add button. (you may need to click the drop down menu to select your printer)

  Test the printer.

  Let me know how make you out.

  Good day!
  Thank you.

• HP Deskjet 3510: Got a new router wireless and cant print now

  Got a new wireless network and now cannot print with new router. I have 2 change all the settings on my printer and how?

  Hello

  You must configure your printer to recognize your new router.

  That is why such a need to be done through your computer, please specify what operating system you are using.

  In addition, your computer is connected wirelessly or with an ethernet cable to your router?

• where can I download center solutions HP for 32-bit vista and the deskjet all in a f 2180

  Hello

  where can I download center solutions HP for 32-bit vista and the deskjet all in a f 2180

  Hi dredgard

  You need to download the driver from the link below and the full features software

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3177562

• Problesm with printing on a printer wireless

  Title: Please help my laptop with my wireless connection,

  I have a laptop with windows 7 and I am trying to connect wirelessly to my ' kodak esp7 printer all-in-one ' and while the printer is turned on, the wifi light is on and the printer says it is ready to go on my laptop.  I can't print and keep getting the same error message cannot find printer according to!  I rebooted my router, the printer and the laptop, but that did not fix the problem.  I also uninstalled the printer and reinstalled and that no longer works.  I can print from my desktop, but for some reason, I can't print from my laptop.  I recently changed my router but it is the same brand and model as the old.  When I initially set up my wireless (with my old router) and tried to print, I had problems, but in some way I could solve the problem.  This time with the new router, I can't solve the problem, and I really need help on this one.  Thanks to anyone with suggestions.  Sincerely, frustrated in Troy MI.

  Hello

  (1) you use the 64 bit version of Windows 7 on your computer?

  Method 1: Temporarily disable the firewall and third-party antivirus on the computer for a test.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Method 2: Troubleshoot network printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 3: Click on the below link to check if Kodak ESP7 all-in-one printer is compatible with the operating system on your computer

  http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=Kodak%20EasyShare%20software&v=Kodak&uid=7&l=en&pf=0&pi=0&s=kodak%20esp7%20all%20in%20one%20printer&os=64-bit

  Check the below link which can help you to install the latest drivers on the computer.

  KODAK EASYSHARE Software - WINDOWS operating systems

  http://support.en.kodak.com/app/answers/detail/A_ID/36670/selected/true

  For more information, see the below mentioned link to contact KODAK support for assistance.

  KODAK support

  http://support.en.kodak.com/app/home/selected/true

  Hope this information helps.

• DeskJet 6940 connected via ethernet to the airport cable, do not print

  Hello

  I used to run my HP Deskjet 6940 printer using a USB connection. I recently installed an Apple Airport Extreme so I can print wireless. If necessary, the printer is connected to the airport by using an ethernet cable and turned on the light green network. On the advice of a HP rep by phone, I uninstalled all old HP software and reinstalled HP software downloaded from the HP website.

  When I try to add the printer to my 'system preferences', it opens a panel that contains the following options:

  Protocol: Automatically selects "line printer daemon - LPD.

  Address: Empty but allows me to type in the IP address assigned

  Print using: no idea.

  More than two things: when I open the HP Device Manager and select "set up a network, information network configuration printer seems in good condition but the Manager does not allow me to 'apply'.  Not sure if this is important but no the printer utilities appear in my folder utlities since the new software download. Thank you.

  Looks like you are using a Mac.

  First of all, the driver for the Deskjet 6940 is built into Mac OS.  You really didn't need to download additional www.hp.com (sorry for the bad advice) stuff.

  Next, we'll check that the printer is on the network.  In Safari, select bookmarks, display all bookmarks.  Select Hello in the left pane, and then check the Deskjet 6940 appears on the list of devices on your network.

  Then, follow these instructions to reset the print Mac subsystem: http://support.apple.com/kb/HT1341

  Now add the printer to the Print & Fax under System Preferences applet by pressing the [+] button.  The Deskjet 6940 should be among the kind Hello from printers.  Select it and press Add.

  I think that should do it.

• Brother MFC-J615W prints & scans through wireless computer, but not the printer itself, error tw006 comes up, how to fix this?

  I tried for several days to get my Brother MFC-J615W do wireless...  I am able to print and scan from the computer but not scan from the device MFC-J615W

  I have:
  Brother MFC-J615W all-in-One
  Windows 7 Home Premium 64-bit
  McAfee Security Center
  Cisco Linksys e2000 router wireless
  I have installed:
  Full driver & software package of brothers website
  ScanSoft Paperport 11SE (scanning software) from the CD provided with the MFC-J615W...
  I tried to scan to Paperport and Control Center 3, but I get the following on my computer when I push the scan button on my printer itself unit...
  Control Center 3-2 errors:
  "Unable to connect to the device.  -If the device is OFF, turn on the device. -Check the I / F cable connection between the device and your computer.  -If the device works on the other post, wait until the task is completed. [TW006]
  "Unable to scan.  Please try to scan the image, once again, if the error occurs again, please reboot your computer and then try to start a new search.  (CC-205-03031f04) "
  PaperPort error: "No Scanner" the default parser is not attached.  Please attach your default scanner or click on the "Select" button to choose another scanner.
  _____________________________
  I can't do anything else in the Control Center 3 but I tried to select the scanner itself in Paperport, which is ' TWAIN: TW - Brother MFC - J615W LAN' a when I hit the scan on the printer, it defines one then the same scan by default to "WIA" error comes again.  Moreover, there is also a ' WIA: Brother MFC - J615W LAN' option in available in Paperport scanners.  The WIA option does not work when I scan in paperport, TWAIN but makes...
  _________________________________________
  I first tried to install the drivers from the CD, but it does work very well so I uninstalled and did a system restore to before that I installed everything...
  Can someone help me?
  Thank you...
  Jesse

  Hello

  1. you receive the error message only when you scan directly from the Brother MFC-J615W printer?

  2. are you able to scan or print from the computer to which the printer is connected?

  If the problem occurs only when you try directly scan at the printer, then I would suggest that you contact the support of brother about the question.

  http://www.brother-USA.com/support/

• Wireless Photosmart C7250 AIO is printing slow response time

  I recently had to reinstall my XP OS.  Since then, my C7250 takes up to 30 seconds to respond to the command 'Print' when using wireless.  Once it starts printing, it moves all along.  If you use the USB connection its response time is instantaneous, as it was wireless before my OS reinstall.  I made no changes to my router Netgear WGR614 v6 to more settings of the reinstall.  Any thoughts there?

  Remove your printer from Control Panel > printers, then:

  Verify that you can access the web page internal to the printer by its IP address.

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• Y at - it a wireless keyboard with a touchpad or a mouse pad?

  Hi, I had a flat screen TV for Christmas with a plug of PC connection.  The main reason I wanted a flat screen was so I could use it as my PC monitor.  You see, I started on the internet with WEBTV.  I sit on my comfty bed and go online.  When I then went to a PC, I had to sit on a Chair in front of a desk.  I want to go back to my days WEBTV comfty, using a PC.  The problem is the keyboard/mouse set.  I have all Microsoft 6000 wireless, which is a perfect size for television Internet, keyboard, but the mouse is a problem.  I have to keep some kind of mouse pad fortune on my bed to use it.  (If you can use a keyboard without a mouse, I don't know how to do it).  What I want is a keyboard with a touchpad or keyboard with a mouse pad and a captive mouse.  Is there such a thing?  Otherwise, would be among the most recent type mouse works better on a bedspread or work handheld?   Thank you.

  Hello

  Microsoft doesn't provide any keyboard with touchpad, but yes, there is a wireless keyboard with touchpad. I suggest you to contact your seller for the purchase of the keyboard with touchpad.
  I suggest you to see the link and choose the keyboard according to your requirement.
  http://www.Microsoft.com/hardware/en-us/keyboards