Look at a point

Similar Questions

• Look an OSX 'point of view to portrait"not"view of landscape ".

  My Air 11 '' has a screen that is up 5 5/8 "and 10" wide.

  This is not a screen ideal for reading a document, if you are looking to him normally, but if I had to rotate and read the book with the WIDTH being 5 5/8 "and 10" HEIGHT, would be perfect. of course, I have to hold the computer in this way while I was reading, but I would try this.

  is there such a feature that would allow me to test this out. interested in native or third-party options.

  Thank you

  Look an OSX 'point of view to portrait"not"view of landscape ".

  If you use only the MacBook Air screen it's doable, but it's hard to return to the normal display.

  Try this (works) in El Capitan:

  1. Launch of system in the Apple  menu preferences.
  2. Command-Option-click on the "View" icon
  3. On the right side of the display preferences, search for the "Rotation" menu dropdown visible again.

  

• On eBAY, I can't use the sorting feature, expand, or look at this point - I used to be able to do with firefox and all of a sudden stopped working. I think it was the last update of Mozilla Firefox. What can I do?

  eBAY has stopped working the way that it used with Firefox, my browser. Sort, enlarge the picture, look at this point - they are all no longer work.

  URL of affected sites

  http://eBay.com

  Firefox 3.6.4 and 3.6.6 use a process called, "plugin - container.exe" who was using much of my CPU when I open several tabs containing Adobe Flash files and locked up Firefox.

  My solution is to use Firefox 3.5.10, which you can get on the Mozilla site at http://www.mozilla.com/en-US/firefox/all-older.html
  I use Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the date of issue, in my opinion, it contains all the latest security fixes in "Firefox 3.6.4".

  If all goes well, they will set Firefox 3.6 in the next version (for example Firefox 3.6.7), until then you should probably use «Firefox 3.5.10»

• Can someone please take a look at and point out the flaws in the chosen components.

  I'll buy components for the creation of 2 new machines to vsphere installation 5. The configurations of these are the following:
  Computer1:
  Core i5 2500
  ASUS P8H67-M PRO H67
  G.Skill Ripjaws - memory - 8 GB: 2 x 4 GB DIMM 240-pin - DDR3 - 1333 MHz
  2 TB WD SATA western digital Caviar Green
  Cooler Master Elite 370
  Corsair CMPSU - 600GS Gaming Series power supply SMPS 600W
  Samsung 22 X DVDRW desktop DVD writer internal
  Computer2:
  Core i7 2600
  ASUS Z68 P8Z68-V PRO
  G.Skill Ripjaws - memory - 8 GB: 2 x 4 GB DIMM 240-pin - DDR3 - 1333 MHz
  Seagate 1 TB Barracuda 7200.12 SATA 3 Gb/s
  Cooler Master Elite 430
  Corsair CMPSU - 600GS Gaming Series power supply SMPS 600W
  Both machines will be used for my study of vmware whitebox.
  Can someone please take a look at and point out the flaws in the chosen components.

  Please go through the link below

  http://www.VMware.com/resources/compatibility/search.php

  http://www.VMware.com/support/vsphere5/doc/vSphere-ESX-vCenter-Server-50-release-notes.html#beforeyoubegin

  Yours,

  Satya

• Which is the correct Point on the waveform of the Signal?

  Hello

  Please see attached image.

  I have labview software which is to measure the load of a load cell output. According to me, that the reading is accurate, except with the software Labview, we get up to 50 lbs less when we read it with the oscilloscope technician.

  What I see is that the technician measure the amplitude of the signal at the top and when there is little noise reading of the oscilloscope is even higher because the placement of the cursor is higher.

  I see that LabView is more or less because when we place the cursor oscilloscope in the middle of the measurement at the center of the signal signal not top it it reads then the same my labview program. I also have a low bypass filter in labview software.

  Which are the correct measure points waiting for oscilloscope to measure? in the picture as an attachment the white slider is positioned correctly, or is the correct red cursor?

  It's just an example of image zoom to see better.

  Thanks to you all.

  JCollado

  If I understand you correctly the width of the track to noculars represents 50 lbs of difference as? If you think about how works a noculars, then the center of the line displayed is probably the most accurate. The line width is determined by a few things, noise superimposed on the signal being a. So, with a noise filtering in your LabVIEW its 'width of the line"program will be closer / diluent, as it will have removed some of the noise component. Place the cursor in the middle of the path displayed in the noculars is an approximation of this, sort of looking for the point where the noise is "average" out 1/2 top / in-1/2 under the cursor, which is about the signal of 'data '. It is difficult to make measurements of accuracy of a noisy signal with a noculars for this reason, where do you put the trace? If you were to remove the filter program LP you would probably get the equivalent of the "wide trace flag" which would be a series of values that plotted close the underlying signal, but with high and low variations equivalent to the width of the track.

  So after all this verbiage, I would read the trace Center, perform an average of noise 'eyeball '.

• Navigate to A point on the map

  I go to contacts and press my sister's address. It appears in the cards. A. Cool point. So I want to navigate. But I can't-not, at least not directly. He asks that endpoint. I can touch the card to give a (very close to Point A) end point, or I can shoot to the top of the list of contacts again and select the address for my sister... still once. But is there no way to say, ' Hey, stupid! You see that you freakin ' no, I just had pull up? It is the place I want to go! » ??

  Yes, Yes, Yes. Voice search. 'Go to so-and-so.' But if I'm looking at a point on a map, I shouldn't be able to just browse without jumping through hoops?

  When I touch "Home view" on a contact, it finds the address and gives me a bubble pointing to the small 'A' marker on the map.  Tap the speech bubble, and I see 'Get directions' and 'Navigate' options.  I think that it worked even before I've updated to the new Google maps.

• Changing to the strange pointer pointer/cursor

  I use Win 7 HP 64.  The mouse pointer sometimes suddenly changes to a pointer strange look.   The pointer resembles a straight line with a few short diagonal lines that resemble a born fish but diagonal lines appear only to the right of the straight line, 4 or 5 triangles online, etc. The change in shape when the pointer of the mouse move on different objects on windows.   I thought icons come from actions of mouse pad, but now I think that it is not.   The pointer of the mouse usually eventually start to blink in small rectangular.   It looks like the TV broken screen which shows horizontal lines just.  Once he arrives, he does not stop until I have put off the computer.
  I tried to look for the answer on the Internet but I couldn't find an answer yet.  I hope that it is not caused by a virus...

  Hello Samohn,

  Thanks for the return of the answer!  Are you able to reproduce this problem if you connect using a different user account?  You can try to perform a system restore ty a point in time before having this problem.  However, if this solves this problem, have scan you your computer for viruses or malware?  I hope these links help!

  System Restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Malware and viruses:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-to-get-rid-of-malware/ba80504b-61f1-4D71-960f-b561798b7b42

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/virus-protector-virus-has-taken-over-my-computer/9f069595-7217-4F8B-a6cc-0062f100a5d1

  Thank you

  James

• enlarge desktop icons when pointed at by the cursor?

  as the title suggests, I was wondering how to look bigger when pointed at by the cursor on the desktop icons?

  Hi paulene bianca lorilla,.

  Thanks for posting your query in the Microsoft Community. According to the description of the problem you want to enlarge desktop icons when pointed to by the cursor.

  I'll help you with this problem. Unfortunately, this is not possible.

  However, you can consult this article for more information.

  Show, hide, or resize desktop icons

  I hope this helps. Let us know if you need help with Windows.

• pin point error

  Hello
  I have an error in an apex application
  
  ORA-00942: table or view does not exist
  Application of calculation error runtime error ERR-1003.
  Ok
  
  and I would like to point stem that question / process of this error is referring to
  
  is there no way to know exactly where the error is or I have to look in every point until I found?
  
  Thanks in advance

  erics44 wrote:

  I have an error in an apex application

  ORA-00942: table or view does not exist
  Application of calculation error runtime error ERR-1003.
  Ok

  and I would like to point stem that question / process of this error is referring to

  is there no way to know exactly where the error is or I have to look in every point until I found?

  Use the Debug Mode.

• Changing the points quiz question

  Hi guys

  With the help of cp5 I created a quiz but because of the vagaries of the LMS, I need to change the total points for each question (default 10 as can be seen in the table of Advanced Interaction but need to reduce each). Is this possible? It was in previous versions. I looked everywhere but can find no way to do this.

  As always all the help appreciated

  Spiersey

  Looking for the points in the Quiz properties panel:

  

  If that's what you're looking for, can I recommend to switch to the workspace Quizzing? This workspace you will have both the properties panel and the Panel properties Quiz at your fingertips, while in the classic workspace, they are both grouped into the same docking on the right side.

  Lilybiri

• Get the value of the cursor in variable AppleScript

  I'm looking for a pointer on where to start with this project, please.

  I want to create an application with a simple slider - say, the divisions of 10% on a scale of 0 to 100% - and then to feed this entry in a script variable.

  I guess it will be something with AppleScriptObjC.  If this is true, can anyone recommend that a good getting started resource please?

  Yes, you can use AppleScriptObjC, but there are also many other languages and tools that can be used.  Are you familiar with AppleScript and cocoa, or programming in general?  I ask because AppleScriptOBjC is a framework that allows you to access Cocoa classes and methods go AppleScript, so you would need to know a bit about the two of them.  In addition, the Interface Builder in Xcode is what is used to generate the UI for your typical application of cocoa, so you would need to know a little more about this as well.

  Apple doesn't have a lot of specific other than their Release NotesAppleScriptObjC documentation, because they expect you to be able to use the existing Objective-C stuff.  However, an early AppleScriptObjC tutorial can be found at MacScripter.net, and something more to date can be found at MacOSXAutomation.com.

• EBay, missing text

  Since I use Win 8 and Firefox, Ebay listings are not information. Single item description shows but not the vendor, store, feedback, or look at that point. Firefox proper display for 2 days then the text disappeared. It's a portable version, so I deleted the folder a re installed Firefox, but the new facility is also not displayed text.

  Deletion of cookies seems to have solved the problem. Thank you

• Upgrade memory for Satellite P15: how to install it?

  Hello all, first time poster who need help please...

  My Satellite P15 a ram of 512 MB (2x256bm) installed and I'm looking to put 1 GB of ram in each of the two slots to bring it up to support 2 GB maximum. At first I didn't know what kind of memory, but I ran a search on scanner system crucial .com and discovered that I need modules SODIMM PC2700 DDR of the 200-pin variety, I think. I opened the flap beside the heatsink / fan and found the existing memory sticks, but I'm amazed how difficult, they are out. I can't to the move and obviously I am wary of the application of force - anyone know of an easy way to remove the sticks of memory through the bottom of the laptop or I should go while removing the keyboard etc. There is no guides on the net can I find?

  Also, as the sticks of 2 x 1 GB is quite an expense, I want to make sure that I understand. I was looking at this point on ebay:

  PageNameZWDVWQQrdZ1QQcmdZViewItem http://CGI.eBay.co.uk/New-2GB-2-X-1gb-PC2700-333-SODIMM-Laptop-RAM-2700-1G_W0QQitemZ230079253310QQihZ013QQcategoryZ172QQss

  and it seems that the kind of thing I'm after, although I'm not too sure about the size of config chipset cited because I'm not particularly sure that requires this laptop, P15. Is this ebay item the kind of thing that will work in the P15

  Sorry it's got quite lengthy, but I really want to do things and I don't have a lot of expertise in the field.

  Thanks for any help and advice.

  Hello

  I think the memory of ebay will work in your machine.

  It is very easy to remove the module from memory normally.
  After removing the plate on the bottom, just to spread legs, who hold the module at his side. The memory will pop up, and then you can extract it.

  Good bye

• Error of flow OR MAX and attribute camera out of reach

  I recently bought a camera Point Grey Grasshopper3, it seems to work fine at point software fly Cap Gris provides, but I get an error NI Max when I try to do a simple puncture (see below). This error appears every time I try to catch a time image the first after the opening OR MAX, even if the flow is set to maximum. Then I change the flow under control of the unit to any integer 125000000 max, and the camera works very well for MAX. It will capture images as much as I need. Then I save the camera output MAX, open MAX once again, it shows my saved settings, I'm going to capture images and I get the error again. If I change the range regardless of the number and it works again in the same session in MAX.

  I had a gray point Zebra2 work very well and he used in my program LabVIEW with IMAQdx to acquire images. When I try to use grasshopper3, LabVIEW returns error attribute camera out of reach of the VI camera configuration. I use to test the camera of the VI is the camera just to open, configure acquisition, start acquiring, get the picture, cancel the acquisition and nearby IMAQdx camera configuration. I did twice open MAX, change the flow, save the camera, close MAX without grasping an image and then was able to acquire images in LabVIEW in the first inning. I would run the VI once again and then it returns the error to attribute camera out of reach. I changed the packet size, resolution and the frame rate of the camera with a difference in errors.

  Since I am able to images of the stream from the camera to the gray point fly capture and Max after activating/deactivating the flow layout, it leads me to believe there is some sort of error MAX/LabVIEW that prevent me to capture the images.

  Any ideas? Has anyone else had this problem with MAX and LV?

  Looks like the point Grey cameras showed this error before the firmware on the basis. See this linkfor such a forum. I would monitor the camera (*.icd) file located in the data folder IMAQdx in public Documents to see if the actual value is be replaced after the configuration of the camera has been saved in MAX. There is a chance that the GigE. XML file which is transferred from the camera is overwrite these values in the unacceptable value. See this linkfor a KB about this error, which leads me to believe that this may be the problem.

• Create a switch to turn when it hits a certain value?

  Hi, I can't find how to create a switch that will allow me to perform a single operation (heat), once a thermocouple hits 20 c and then heat through to 132 C.  As soon as the thermocouple hits 132C I need to spend in the other operation (cool), and cool to 20 ° C, once again, completing the cycle. Between 20 and 132C it's hot and cold depending on if it has just changed heating or cooling.

  I made my own, but I only managed to wear at 132 ºC, and as soon as the value is not 132C, he began to heat up, which is where I need it to cool down.

  Thanks for your help!

  Andrew

  P.S. I'm under Labiew 6.1, so I prefer to have an explanation of what to do b/c of some vi may not work because it is an older version. I also do this for my internship and am still learning in the early stages of the use of Labview. Thank you!

  You create a shift register by clicking right on the border of a loop.

  Try something like this:

  

  (some things will look differently in point 6.1, for example the Boolean constant diagram). See how far you get.