Looking for a block of POWER 500 ~ 550W that fits HP pavilion 500-023w desktop

I bought a Dynex 520w ATX PSU for HP pavilion 500-023w.  This power supply is about 1.5 cm longer than the original and just, it does not in my computer.  It is too big.

Previously, I had Thermaltake TR2 430w PSU.  This is of same size as the original power supply. But it won't last even 3 months. IDK, maybe it's not enough for geforce 2 650.

I'm looking for a PSU that adapts to the 500-023w Pavilion and able to run 650 geforce.

Please can someone recommend some PSU?

After watching the dynex 520was reference, it is noted that it is the depth 6.3 "on this case. What you asked has a power supply with only 5.5 "deep. These meet your requirement.

Rosewill 530W or 630W, as these two are depth 5.5 ".

No OCZ in the range of 500W which is depth 5.5 "

Corsair 500w 5.5 "depth, the Corsair CX600 might be a good choice, but it is sold out at this time.

Any of these will provide a GTX 650 card needs. I love the Rosewill 630W. It will draw only what suits him.

Tags: HP Desktops

Similar Questions

  • Looking for a driver and Power Meter solution.

    Hello

    I'm looking for a better time LabView real solution available for reading (or analysis) and storage of voltage, current, power, or PF too since a 110 V AC direct online. Any combination of pilot and profitable meter plug-and-play is available?

    Thanks for your time!


  • You are looking for the block CD build based on the time for MPC simulation.vi

    Hello everyone! I'm trying to implement MPC in LabVIEW. I downloaded some code that shows the implementation. My question is in these codes that I see a named block as CD build based on the time for MPC simulation.vi. I tried to find a lot of this block, but I could not... Can someone help me with the problem (exactly under what section I get this block) or can someone tell me how can I give the profile of setpoint for the problem of simulation MPC?

    The associated screws to generate the profile found in:

    C:\Program Files (x 86) \National Instruments\LabVIEW 2011\vi.lib\addons\Control Design\_MPC\Reference profile

    or

    C:\Program NIUninstaller Instruments\LabVIEW 2011\\vi.lib\addons\Control Design\_MPC\Reference profile

    You can look at examples of:

    C:\Program Files (x 86) \National Instruments\LabVIEW 2011\examples\Control and Simulation\Control Design\MPC

    C:\Program NIUninstaller Instruments\LabVIEW 2011\examples\Control and Simulation\Control Design\MPC

    to check the use of these screws

  • I'm on firefox version 8. However, I noticed that my Norton Security (green check mark) and the toolbar has disappeared. So when I'm looking for goole is no longer tells me that are safe places.

    nothing more to add to that, except that I run Windows xp on my laptop.
    I've updated my norton Internet secuirty to the latest version already and checked my firefox is the latest version too.

    Make sure your addons are capable?

    See how to activate the Norton for Firefox 8 patch

  • Looking for a keyword using as a query that could contain several appearance in the same column

    I am facing a problem. A bunch of my JSP frontend code was stored in a few tables in my database (65 rows in a table), I have identified using a few queries. Now, I want to update a Href link, which is present in all of these motions. But since these entries in the column are very long (50 to 60 lines long) and it is possible that some lines may the link (which must be replaced), several times, I'm not sure if a query updated simple using a only as will work for her or not?

    Any suggestion/ideas are welcome.

    Please let me know if you need more info.

    Hello

    e5d4d744-cf66-4FE0-8353-bbd8fd826b21 wrote:

    I am facing a problem. A bunch of my JSP frontend code was stored in a few tables in my database (65 rows in a table), I have identified using a few queries. Now, I want to update a Href link, which is present in all of these motions. But since these entries in the column are very long (50 to 60 lines long) and it is possible that some lines may the link (which must be replaced), several times, I'm not sure if a query updated simple using a only as will work for her or not?

    Any suggestion/ideas are welcome.

    Please let me know if you need more info.

    Yes; whenever you have a problem, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements), so that people who want to help you can recreate the problem and test their ideas.

    Also post the results you want from this data, as well as an explanation of how you get these results from these data, with specific examples.

    Simplify the problem as much as possible.  For example, if your strings are sometimes up to 4000 characters, you don't have to display all of the data that is almost as long.  You can probably show you want with strings that are 80 characters long.

    Always say what version of Oracle you are using (for example, 11.2.0.2.0).

    See the FAQ forum: https://forums.oracle.com/message/9362002#9362002

    This statement:

    UPDATE table_x

    SET str = REPLACE (str

    old_link

    new_link

    )

    WHERE str LIKE "%" | old_link | '%'

    ;

    will change all the occurrences of old_link to new_link.  It will only change the lines where old_link occurs, but, aside from that, regardless of how many times old_link occurs in str: if it appears 2 times in the same str, two occurrences will be changed in new_link.

    Watch out for the problem ' mother is in chemotherapy.  If old_link is 'bar.com', the above statement will change "a".  You may need to REGEXP_REPLACE or REGEXP_LIKE if you need to consider what (if any) comes immediately before "bar.com' to decide or not to change it.

  • HP Pavilion 500-023w desktop: Hp pavilion 500-023w can run this card EVGA GTX 750 Ti SC (compatibility?)

    Hello very good day my question is if my pc is compatible with this card EVGA GTX 750 Ti SC

    I want to ensure before making the purchase

    PC

    Intel Core i3-3240 CPU @ 3.40 GHz

    Foxconn
    Model 2ADA

    Ivy Bridge chipset

    PCI Express x 16 Slot

    8.00 GB of RAM DDR3 @ 798 MHz

    Integrated Intel HD graphics

    10 64-bit Windows Home

    Marc, welcome to the forum.

    Yes, I think that your motherboard should be compatible with the video card.  The card requires UEFI in the motherboard and your mother should have.  Just be aware that the specifications concerning the State of the map that it requires only a power supply (PSU) with 300W power.  Many members have reported that it is rather 400W.  You can try with the current POWER supply, but if this does not work I suggest one made by Corsair.  I recommend at least 500W.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • I am looking for a solution Server (with Te css) for the fact that Firefox uses the system DPI settings, which makes my site look (too) big.

    My site appears much too big in firefox. And I want all browsers to view my site properly.
    I know that there are settings wihtin firefox that fix this problem. But I'm looking for a solution on server side, so that visitors to my site must not be disturbed by changing their settings.

    You may need to change your site as soon as 30 Chrome and IE 11 will also use the system DPI setting (like Firefox does now).

    Possible solution:

    • Type of topic: config in the Firefox address bar and hit the Enter key.
    • If the warning that this might void your warranty , click I'll be careful, I promised.
    • Search for layout.css.devPixelsPerPx

    • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

    If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

    If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

    To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  • HP Pavilion dv7 - 3188cl: looking for a DVD burner for my laptop

    Hello

    I'm looking for a DVD player, cheap but good that could fit into the computer laptop HP Pavilion DV7 - 3188 cl. Can someone please give me some advice?... Any help is greatly appreciated... Thanks for the help in advance...

    Use your P/N on hp pilot site and find the service manual and see what the cottage to OD it uses and you can then use to refer to what DVD player burner you can get. And if it's a Sata Drive more recent OD are sata you just have to make sure that it is a DVD burner and then swap the front to match the original.

  • Looking for accessories for a Satellite L655D-S5151

    I'm looking for some accessories for my Satellite L655D-S5151. The newsletter that Toshiba continues to send to me is always on new laptops. I don't need a new laptop that I just bought it. I need accessories for the one I have.

    Now I'm looking for two things:

    A graphics tablet that I can use for tracing/drawing/note taking which would be compatible with Tablet PC Input Panel and art including OpenOffice Draw programs.

    Something to replace notebooks. Something handheld or slightly larger with a database of address/phone number would be nice. I would like to be able to download the notes from the device to the laptop. I didn't need anything else. No games, camera or phone. It should be relatively inexpensive. I thought I'd do a PDA, but apparently they are obsolete. Does anyone have any suggestions? Google was not helpful.

    Windows 7 Home Premium SP1

    How about something like an Android Tablet?

  • looking for a file in the disk

    Hello and greeting to your friend,

    I'm looking for a command or a small program that displayed the files by their names in directories and returns a Boolean value, true if the file exists and, if mistakes.

    Thank you

    You can use the recursive file list feature to create an array of file names. Then do a string search in this table:

    Your regalar expression would be "^ foo". Refer to "Match Regular Expression" primitive for more information on regular expressions. Also you can watch here in the forums since it is a regularly discussed topic and, unfortunately, not too easy at first...

    Norbert

  • I just bought a Seagate moved no more than 2 t backup and the dashboard, he is looking for vcredist.msi

    I just bought a Seagate moved no more than 2 t backup and the dashboard, he is looking for vcredist.msi

    Setup hangs after that it does not
    Help, please.

    Hi Frank,.

    Thanks for posting in the Microsoft Community.

    You can also post this question in the Seagate Community Forums: http://forums.seagate.com/

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • I'm looking for collection published containing unpublished photos.

    Hello

    Ref: Lightroom 5.7 [991162] on Win-7 Ver.6.1 [7601]

    I have several published collections. As I proceeded new photos offline I want to add (some) in these collections. When I go online I would like an easy way to find these for publication. Please suggest a workflow to find these photos without having to manually open each possible collection.  Thank you.

    I think that you are looking for a way to quickly find photos that were placed in a published collection that must now be published (because they have been recently added or modified). As you have discovered, the method in this other thread finds photos that have not been placed in any published collection, something different entirely.

    It's not a way to do exactly what you want.  However, it is easy to get all of your published changes.  Just select all the collections that have been published for that service and click on publish.  Only the photos recently added or changed will be pushed.  To select all collections published in a service, click on the first and shift-click on the last.

  • You are looking for a compatible database XML system

    Hi all

    I'm looking for an RDBMS (Relational Database Management System) that manages the XML data in a relational way.
    I found the IBM DB 2 XML Extender. However, I don't know if this system is already in use (because the last release was in 2003).
    I would be very grateful if you could help me find what I'm looking for.

    PS. for RDBMS, XML data processing, we find two categories: systems that support XML (they store XML data using a special type of data as a BLOB, CLOB,...), or the native XML systems (data XML stor in its hierarchical structure, so the fundamental unit of storage is XML document). So, I am looking for a system that supports XML and NOT a native XML system.

    Thanks in advance.

    Best regards

    I misunderstood your found thing

    >
    But I am looking for a compatible database XML, Oracle XML DB is a native database.
    >
    and
    >
    PS. for RDBMS, XML data processing, we find two categories: systems that support XML (they store XML data using a special type of data as a BLOB, CLOB,...), or the native XML systems (data XML stor in its hierarchical structure, so the fundamental unit of storage is XML document). So, I am looking for a system that supports XML and NOT a native XML system.
    >

    If I understand correctly say you

    Database compatible XML - store XML data using a special like BLOB, CLOB data type
    database XML Native - XML data in the hierarchical structure stor

    projection of oracle xml db, you can store your xml file in xmltype in clob or BLOB or as a file in the operating system
    looks so much like oracle xml db is compatible XML native XML databases :)

    I'm going crazy ;)

  • Looking for 11 JDev ADF Faces example with several filters

    I am looking for an Internet example ADF Faces application that has the following text:

    Several combo boxes (LOVs) - some who invites just for a date range. These could as well be cascade.

    Finally a run button that runs a query based on the values of the drop-down list boxes in bind variable, then displays the results under the filters in a table.

    It sounds easy enough, but I have not found an example of this. Can someone point me in the right direction? I tried to create a quick example on the EMP table with a combobox to date that I could use to date of hire. I can't get this to work with links to view the results of the table well. I don't know how the code for the event to run the query and create the table.

    Thank you, Ken

    Hello

    even if we would work 24 hours a day 7 days a week. At the end of the year we would miss still some usecases as examples. How to do what you want

    -Drag the table
    -Drag the execute with params as a parameter
    -remove the attribute hiring date
    -Drag the variable of the hiring date linking (I think I would use a component date.) MinValue instead of a selectBox date). However, do not hesitate to choose a selectOneChoice component. In the link dialog box, create a reference to a VO list to fill the selectOneChoice (must be located a VO you query the target)
    -Similar to all others

    By pressing the button send the form parameter will execute the query

    Frank

  • HP pavilion 500-023w (installing windows 7 questions)

    I just bouth HP pavilion 500-023w desktop PC recently.  It was pre installed windows 8. I tried to install windows 7. Finally, I installed windows 7 but I need the software drivers for my "HP pavilion 500-023w.

    I tried to download HP Web sites, but these drives only work for windows 8.

    So he will be busy if someone can give me the software drivers links that works perfectly on windows 7 for my "HP Pavilion 500-023w".

    Faisal

    Hello

    No, now, try this:

    http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56998.exe

    Kind regards.

Maybe you are looking for