HP pavilion 500-023w (installing windows 7 questions)

Similar Questions

• Looking for a block of POWER 500 ~ 550W that fits HP pavilion 500-023w desktop

  I bought a Dynex 520w ATX PSU for HP pavilion 500-023w.  This power supply is about 1.5 cm longer than the original and just, it does not in my computer.  It is too big.

  Previously, I had Thermaltake TR2 430w PSU.  This is of same size as the original power supply. But it won't last even 3 months. IDK, maybe it's not enough for geforce 2 650.

  I'm looking for a PSU that adapts to the 500-023w Pavilion and able to run 650 geforce.

  Please can someone recommend some PSU?

  After watching the dynex 520was reference, it is noted that it is the depth 6.3 "on this case. What you asked has a power supply with only 5.5 "deep. These meet your requirement.

  Rosewill 530W or 630W, as these two are depth 5.5 ".

  No OCZ in the range of 500W which is depth 5.5 "

  Corsair 500w 5.5 "depth, the Corsair CX600 might be a good choice, but it is sold out at this time.

  Any of these will provide a GTX 650 card needs. I love the Rosewill 630W. It will draw only what suits him.

• Must regularly restart the DHCP Client - HP Pavilion 500-205 DT - Windows 7

  HP Pavilion 500-205 DT - Windows 7 Home Premium 64 - bit SP1

  Realtek PCIe GBE Family Controller - pilot 7.67.1226.2012

  Bought 3 identical machines for our daycare. Set up the same. All work fine except ONE of them becomes inaccessible periodically (every day more or less) on other computers on our small LAN-to-peer Windows. You can see, but cannot access any shared folder. To access OTHER computers on the local network of it there is NO problem. All 3 machines have the same profile sharing, workgroup, permissions, AV, firewall, all settings. I realized by restarting the computer solved the problem immediately but temporarily. I reduced to restart the DHCP Client service. Do all works well immediately, but temporarily.

  I tried the things:

  Call support HP - not useful at all. It is under warranty.

  IPv6 disabled

  Disabled wireless

  Disabled network card stopcock energy saving

  Definition of recovery CLIENT DHCP on:

  First failure = restarting the Service

  Second failure = restarting the Service

  Subsequent failures = restarting the Service

  Reset Fail Count after = 120

  Restart the Service after = 0

  But again, this is not the case for other machines with the default settings. Nothing works except the Client DHCP service is restarted. Loss of access occurs with or without someone connected or using it. It has happened since its first establishment.

  I don't know if the HP warranty covers the OS loaded at the factory. I don't want to restore the thing and start over. I'm not a Pro, just the guy in the office who did these things, but it seems that the network card may be faulty. I don't know if I can convince a person of first level support phone to have me bring the machine in an approved place.

  Any help greatly appreciated,

  Larry

  HP sends a FedEx box to put the thing in picked it up. I'll mark this resolved thing. Thank you all for your comments!

• Pavilion dv4: cannot install windows 8.1

  I installed windows 8.1, after installation on drive c. The PC reboots and start loading. But he remained at 8.1 windows logo. He drives half an hour. After saying the message "your PC ran into a problem needs to restart. What should I do? My PC information: pavilion dv4
  3 GB ram 32-bit.

  Hi @ismailbadhusha,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dm4 Notebook and problems with installing Windows 8.1. First of all, try to click on the Windows icon, type services in the start search box, and then click or tap on the advice of local Services. Scroll down to the Windows Installer. Startup type must be - automatic and the service status should be - has begun. Restart the computer after this stage and try to reinstall.

  Your system came with 64-bit Windows. You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  If you have an error message could you let me know what it is.

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below!
  
  Thank you.

• Pavilion dm4: cannot install windows on my laptop

  I had trouble installing a hard drive in my laptop.  The laptop is a Pavilion Dm4.  Below are the steps I've tried initially.

  1. insertion of my hard drive with Windows 7 installed and works very well in the Pavilion dm4.

  RESULT: computer crashed just after that the windows image came.

  2 reformat the hard disk by performing a clean install of Windows 7.

  RESULT: Once installation is complete my Windows installation fails and I get a message saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  3 reinstall using the system recovery disk that I just bought HP using the code series of laptops.

  RESULT: After inserting the recovery disks and the driver installation disk, I get a message

  P2PP Burn Boot Check failed

  Possible causes

  1.yellow - bang occurred in Device Manager

  2. some silent-installation failure of applications

  3 Found failed to PININST_BBV

  4 Found failed to PININST_BBV2

  5 found memory dump file

  Suggestions:

  1. check REGDEV_BB. Drivers LOG

  2. check the BBApps. Application log

  3. check the memory dump file

  Hi @orangeg66,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dm4 Notebook and P2PP Burnboot could not install. I have seen that date back to 2012 first of all, and then by a default BIOS withthis document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop. Restore factory default BIOS works on it.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.
  
  Please let me know how it goes.
  
  Thank you.

• Pavilion 500-054: reloading Windows 8 new hard drive

  Hello. I had a drive hard failure and have installed a brand new. I don't have the recovery disk. My question is how can I get Windows 8 original OS back on my new HDD without having to buy a whole new full version of Windows 8? Any help would be appreciated. Thank you

  I'd be discouraged for sure.  If you want to reinstall Windows 8 and that you can get at least that works, maybe you can run recovery of the value inside the OS after installation.  SEE HERE for installation of the OS, but you will need all the drivers for the HP support page to make it work.  I think that if I was going to all this trouble, I then install Windows 10 for free.

• Pavilion 500: Not the Windows partitions?

  Got a desktop Pavilion 500 series computer.  No recovery disk came with it.  Is this so its been now, or disks were supposed to come with the machine?  If you have a HD failure, contact HP for a set right there?

  Thank you.

  Hello

  You should find that the PC has a manager called recovery software that allows you to create 1 set of your own recovery media - see the document on the link below for more details.

  http://support.HP.com/us-en/document/c03481733

  Kind regards

  DP - K

• Pavilion 500-164: motherboard replacement raises Questions

  
  

  Thanks, Malygris1, for your very comprehensive answer.  Unfortunately, I'm looking forward and installed the new Board of Directors.  For those faced with replacing a motherboard HP, I will elaborate on my trip.  The most important step was in buying for the motherboard.  I have no HP, but from a dealer on Ebay.  I DID, however, carefully note the model of the motherboard AND the designated HP part number of alternatives on a small paper on the motherboard label.  The same motherboard model is used in several models of HP Office; but, if the number of HP spare parts is matched, the info on the model should be on the motherboard.

  My original problems were solved with the installation of the new Council.  After a router struck by lightning, the ethernet port had stopped working, and when told to stop, or in standby mode, the machine would invariably restart.  The new motherboard solved both problems, which seem to be related to the power surge.

  I installed the new Board of Directors of the Windows 10 updated 500-164 and held my breath I have it powered for the first time.  I was pleasantly surprised to see that everything looked the same as when I left it.  Recognized support assistant the new Board of Directors as part of a desktop computer 500-164.  I have not tried; but I hope that the recovery media will work, if necessary.  Malygris1, do you think that if Support Assistant recognizes the info on the model, the recovery disks will work?  I'm curious to know how it works, but, if not, no big deal, as I now have a new image Acronis 10 Windows installation, which works perfectly on the 500-164 Pavilion (without "Pitfalls", as some have reported with audio, etc. of the wireless card.).

  My second concern was whether or not Windows is always activated with the installation of the new Council.  He said that he "Windows is not activated.  ... Rats and other profanity.  I know it can take time to be put in correspondence with the info from Microsoft, so I updated the bios and checked the rest of the ports for the features of the machine.  I returned in configuration/system Panel and he told me that the activation information were "unavailable" - different from the message 'not active' sooner.  I've been waiting on this screen for a few minutes and the message changed to "Windows is activated"!  I was ready to make Microsoft telephone activation and I had run a keyfinder to get the original MS product key for Windows 8 from the hard drive, but I didn't have to use both methods.

  So, in summary, if you want a card mother 'replacement', shop for the exact number of spare parts HP; not only the MFG part number.  It will save you a lot of grief.  Obviously, if you want to 'upgrade' from your motherboard, all bets are off, because it's a totally different scenario with different issues to deal with.  My project was a complete success at a cost of $103 for the new motherboard and several hours of my time.

• 23-1015 Pavilion: Pavilion 23-1015 installed windows and now not wifi

  I have a HP Pavilion while a 23-1015, he had some virus on it so I tried to restore the plant. Ended up having to reinstall windows 7 on it. He said that was not installed the driver for my network connections, so I downloaded the hp Realtek driver. Still no luck. It says device disconnected or broken. Wireless was fine until I have restore. Someone has an idea what is happening?

  Hello:

  I think you need this driver so that the wireless card to work... The Realtek driver is for the wired network adapter.

  This package provides the driver for Ralink Wireless LAN Card solutions in the supported models that are running a supported operating system.

  File name: sp58084.exe

• Pavilion tx2000z clean install windows 7

  Hello

  I had just updated my Tablet PC from Vista Home Premium to Windows 7 Professional so I had to do a clean install. Everything else seems to be fine, but here are some things I'm having a hard time finding answers to:

  -l' screen will not auto rotation, I already updated the drivers for ATI Radeon 3200 (graphics card). If I do it manually through the settings of the graphics, it spins.

  -preloaded programs supplied with the laptop are now gone youcam through cyberlink etc... I was wondering where I can again those re-download? I went on the manufacturers Web site and they want to buy them from me! they came free on my laptop!

  All the tips and the link that you guys can extend is appreciated!

  Thank you

  Hello

  1 graphics card:

  Uninstall your current driver and install the latest driver from the Ati site. There are now some 9.9 Catalyst version avaible for Win7. Information gow install below:

  Download drivers desktop (Catalyst Software Suite) here and click on the card mother/Integrated video drivers , then Full Catalyst Software Suite for your system.

  2. Cyberlink YouCam Version: 2.0.2816 here

  3. you can run Windows Update to get drivers. I recall it y digitizer Wacom driver for Win7 avaible.

  How all the information here.

  4. you can also use Vista drivers. Link reported by user above.

• HP Pavilion 500-023w desktop: Hp pavilion 500-023w can run this card EVGA GTX 750 Ti SC (compatibility?)

  Hello very good day my question is if my pc is compatible with this card EVGA GTX 750 Ti SC

  I want to ensure before making the purchase

  PC

  Intel Core i3-3240 CPU @ 3.40 GHz

  Foxconn
  Model 2ADA

  Ivy Bridge chipset

  PCI Express x 16 Slot

  8.00 GB of RAM DDR3 @ 798 MHz

  Integrated Intel HD graphics

  10 64-bit Windows Home

  Marc, welcome to the forum.

  Yes, I think that your motherboard should be compatible with the video card.  The card requires UEFI in the motherboard and your mother should have.  Just be aware that the specifications concerning the State of the map that it requires only a power supply (PSU) with 300W power.  Many members have reported that it is rather 400W.  You can try with the current POWER supply, but if this does not work I suggest one made by Corsair.  I recommend at least 500W.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP PAVILION LAPTOP computer: install Windows 10 unrecognized DVD player MSVCP71.dll HP needs to reinstall. HP help me to reinstall?

  Updated for Windows 10 online and now DVD player does not recognize nor activate to play DVDs with HP Media Player. Given message that MSVCP71.dll is missing and must be reinstalled. Can you guide me through this process?

  Hello

  Windows 10 won't come with a good media player, you have to pay for Windows Media Center. He will probably kill on your machine the player from CyberLink software too. Pouvez be able to re - install using CyberLink Media Player:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64647.exe

  or more

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59999.exe

  If this isn't the case, please use the next free drive, he's going to play almost all video formats:

  http://www.videolan.org/VLC/download-Windows.html

  Kind regards.

• Pavilion 500-023w: BIOS

  Try to get answers, but nobody... My computer will not BIOS otherwise, doesn't seem not to load drivers, because repair-rescue-install disks do not work, tried all combinatons key to enter the BIOS, comfirmed battery is good and the computer was working perfectly last night. I have nothing that would change the settings. I would really appriciate ideas or thoughts good or bad, I tried everything I know.

  Hi @smriddell,

  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Hi I have a hp Pavilion dv6000 I installed windows 7 32 top anyone without a graphics driver for him.

  Windows 7-32 bit

  HP Pavilion entertainment pc dv6000

  MYSTERIOUS_H4CK3R

  Thank, s need much this dude thanks.

• HP Pavilion 500 023w: BIOHD -.

  I was everywhere except in the right place, looking for the solution. I read a lot of cases that are the same but no suggestion that work! Is there any help out there?

  I think you're right and I should trash the drive. As a test I put it up to clone the drive. I used a good working computer thinking I'll clone from a player well known to those in question. Guess what!  The test did not clone to disc. Since that was the case he told me that the drive is history. While I was there I cloned the drive well known to an SSD with the same configuration and everything worked fine!