Looking for results of the DAP for historical purposes

Similar Questions

• You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term.

  I get error frequently below.  In General, when you navigate on old posts on the forum SQL and PL/SQL, after reading a post, I click on the left arrow in my Firefox browser, which I expect to take me to the page of the posts that I had.  Instead, I get a page with no messages.  I then click on a forum page numbers in the upper right corner.  Sometimes brings back me to the page that displays the list of the posts that I had.  However, more often I get the below error.  So try to navigate from one position to another is desperately slow.  You can fix this?  Everybody brings a work around to be able to get from one station to another, or at least back to old messages without the error page?  This is a problem that happened before and after the upgrade.

  "You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term. »

  Have you tried right-click (ctrl-click on Mac) and choose 'Open link in a new tab' instead? With all the dynamic html today browser back and before options are often dead still. If you open links in a new tab or window, you can simply close the window instead of using the back button. It may take awhile to get used to it, but there are some benefits, such as the loading of the pages in the background, and you do not lose the focus of the page where you. You can disable "when I open a link in a new tab, swtich it immediately." If I understand your problem, maybe it works better.

• I perform a search, results, find the message I was looking for. How can I find this message in my folder structure and subfolder (relatively) complex?

  Hello
  I use structured system subfolder to keep my organized emails (hundreds and hundreds of folders).
  When I do a search, get the list of results and in this list, I found the email I was after, HOW can I find the message? In other words, how can I open the folder that contains this particular email?
  Thank you in advance for your time and effort.

  Right click on a folder, search for Messages, and then click 'Search subfolders', then enter the selection criteria, search, search for a result in the lower pane, then 'open folder '. The message is opened in the Message pane and the containing folder is highlighted in the folders pane.

  It isn't a global search and location does not show the full folder path, but it is another option. Note that the location column can also be displayed in the message search window.

• I am looking for an email that was trashed and does not appear in the special research.

  Or search boxes or the filter I would look for an e-mail that was sent to the trash, I am trying to include them in the search. Is it possible to include the trash in special research?

  Try this, if you know that the email has been deleted. If it is not visible, select the quick filter toolbar.
  "View' > 'toolbars' > select" quick filter Bar'"

  Select the folder "deleted" / "Trash."
  Type a word in the search for quick filter which is likely to refer to what you are looking for.
  use the "filter messages by: to change the results."

• You are looking for an extension in order to reduce the size of the image

  I often need to reduce the size of the screenshots. Looking for an extension that would allow me to do this in Photos, without the need to export, and then import them back. It's a simple task, but I could not find a way to solve this problem. There are many applications with extensions that allow cropping images, but the apps/extensions similarly dedicated screenshot cannot reduce the size.

  The feature I need, it's essentially the only preview offers under the menu set the size as a percentage or in pixels change. Special bonus for an app/extension that would work also on the pictures for iOS.

  
  

  
  

  This is not possible - you can never make any change to the contents of the library - the only way to reduce the size of the image is by exporting using different size options in the window export

  You can use a preview an external editor with external publishers for extension of pictures - I have no idea of what would be the results with that

  LN

• I'm looking for a software that can track the use of the software. No spyware, I just want to know if the investments are indeed worth

  Invest US heavily in certain types of software (by request) but have little or no in order to see if it is actually used after purchase.  I'm looking for a way to track 'time-used '.

  Hi schellekensr,

  Unfortunately, there are no Microsoft software to help you accomplish what you want.

  However, you can search online by using your favorite search engine and see if there are any 3 Group software that can help you accomplish the same thing.

   

  WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• Computer repeat it is looking for updates, but no results me

  Original title: Windows updates

  I had my disabled Windows updates but now want to catch up on what I missed. I use the feature "Check for Updates" in the control panel and my computer telling me it is looking for updates but doesn't give me any results. What can I do?

  It is a step upward if she began the search. Make sure you also have KB3109094, KB3087039 and KB3078601 installed. Then try again.

  Best regards, VZ

• Aspire One D255E don't look for a printer connected to the USB port

  My D255E an Aspire don't look for a printer connected to the USB port.  I've never used a printer on this computer before.  Windows 7 Starter will support a printer?

  It should be.  Try these steps and results reports:

  When you turn on and connect the printer via USB, shows tasks for animation in the system tray at the right end of the bar, click it and monitor driver installation.  If the pilot goes then printer must print and perhaps scanning of base via the Windows fax and scanning utility.  To find such a piece of utility type its name in the search box.

  If the driver does not load type of devices and printers in the box to start the search, open it, check if printer is already displayed, right-click on it to open the properties, and try to print a Test page. If it does not print right click on printer again to solve problems.

  If the printer is not listed visit Support downloads of the printer Web page to download and install the base driver.  If a wireless printer, you will need the complete package to do it fully implemented.  If you want to be able to scan from the top of the printer to the PC, then you also need the full package.  Keep track of the configuration screens when you install the software.

  If you still have problems after return the exact error with photos if possible.

• Looking for a SQL query to retrieve callvariables + ECC to a RESULTS of SCRIPT EXECUTE (translation VRUS)

  Hi team,

  I'm looking for a SQL query check data (ECC + CallVariable) due to a RESULT of SCRIPT EXECUTE when you ask an external VRU with a translation route to VRU with a 'run external Script '.

  In my view, that the data are analyzed between the termination call detail + termination call Variable.

  If you have already such a SQL query I would be very grateful to have.

  Thanks and greetings

  Nick

  Omar,

  respectfully, shorten the interval of a day might not be an option for a history report ;-)

  I recommend to take a look at the following SQL query:

  DECLARE @dateFrom DATETIME, @dateTo DATETIME

  SET @dateFrom = ' 2014-01-24 00:00:00 '

  SET @dateTo = ' 2014-01-25 00:00:00 '

  SELECT

  TCV. DateTime,

  TCD. RecoveryKey,

  TCD. RouterCallKeyDay,

  TCD. RouterCallKey,

  VME. EnterpriseName AS [ECVEnterpriseName],

  TCV. ArrayIndex,

  TCV. ECCValue

  OF Termination_Call_Variable tcv

  JOIN THE

  (SELECT RouterCallKeyDay, RouterCallKey, RecoveryKey IN Termination_Call_Detail WHERE DateTime > @dateFrom AND DateTime)< @dateto)="">

  THE tcv. TCDRecoveryKey = tcd. RecoveryKey

  LEFT OUTER JOIN Expanded_Call_Variable VME ON tcv. ExpandedCallVariableID = VME. ExpandedCallVariableID

  WHERE the tcv. DateTime > @dateFrom AND tcv. DateTime<>

  With variables, you can set up your code (for example, you could write SET @dateFrom =? and let the calling application to fill in the DateTime for you).

  In addition, join two large tables with all the lines, as you did (TCD - TCV) is never a good option.

  Another aspect to consider: all the ECC is actually arrays (always), is not good to leave aside the index value (tcv. ArrayIndex).

  G.

• "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  This appears when I try to connect with Microsoft Account.

  I tried all the possibilities that was displayed in the link but when even the problem exists... below you please suggest me the solution to add the microsoft account

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/sorry-we-couldn

  Hi Nikhil,

  If you connect through a proxy, then I suggest you to try the steps suggested in this article and checking:

  http://support.Microsoft.com/kb/2778122/en-us

  Keep us updated on the results.

• looking for help on the script PowercLI.

  I'm looking for a script powershell group based vmsessions on the State of vmtools version so that I can plan the upgrade to version VMtools on virtual machines.

  Please use the below script and let me know if problems.

  Claire

  $logfile = "result.txt".

  $vms = «»

  $output = «»

  $temp =""

  $vm =""

  To connect to vcenter Server

  $vcenter = read-host "enter the vCenter Instance.

  to connect-viserver-Server $vcenter - WarningAction SilentlyContinue

  Get-Date | out-file $logfile

  echo "= details = | out-file $logfile - Append

  $vms = get-Content.\list.txt

  $output = get - vm $vms | SELECT name, vmhost, PowerState, version, toolsversion, toolsversionstatus, comments.

  | Tri-objet-property toolsversionstatus | FT - AutoSize GroupBy - toolsversionstatus-wrap

  $output

  $output | Out-file $logfile - append

  Disconnect-VIServer *-confirm: $false

• You are looking for the CSS property in the path of the Charcoal_Grey to change the font size in the sidebar of OCD (ResponsiveHTML5)

  Hello

  It's the same question here for Theme_1 Standard: the response has been

  For this layout:

  Office: div.wTOCTree

  Mobile: div.wTOCNode

  William van Weelden

  I do not have the same properties in one of these places:

  

  Nobody knows what the right properties change for that police smaller TOC for the Charcoal_Grey layout? I'm afraid that if I started fooling around with it I'll do something irreparable. On that note, if I want to copy the entire project so that I do not have a test environment, is there a SAVE as feature of type, I can only see RENAME (my apologies for the 2-iron-1 issue).

  Thank you

  Anne

  Charcoal Grey, you will want to use the SCSS to generate CSS instead. (See; ( Layouts and RoboHelp screen profiles)

  The selection you are looking for is: % TOC-Office-theme3

  Add a font size to this item and it will scale you provide. (Use of measures of the MA for best results. The rest of the content also scales with the help of em.)

• Looking for the number of right-hand side of a built-in raid card of R415 H700

  Hello

  I have a server with a RAID card integrated S300 R415 and I'm looking for:

  Dell PERC H700 integrated RAID controller

  to install in the integrated RAID controller connector. I don't want to use the PCI-E slot card just above a RAID card because I need for Ethernet. I like the 1 GB if possible but I think they devised only integrated map of H700 with 512 MB.

  When I search RAID controller internal Dell PERC H700, I get a lot of results, but could not get an exact match for a server R415. I'm afraid that if I get homesick, she is not right. Please let know us on the H700 onboard correct for a R415.

  Unfortunately, the only card that can go in the built-in storage location is a modular 6ir SAS or a modular S300, which you already have. The SAS 6IR has no cache and only supports raid levels 0 and 1 (no raid 5). To go with a H700, you must remove the current Ethernet card, you have to slot 1.

  http://www.Dell.com/downloads/global/products/Misc/r415_tech_guide_11_18_10_final.PDF

  page 38

• Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  I tried to do this by using the search but it will find only them, if they occur as a long chain, that is to say "Here's the answer" rather than how they occur in the document it is to say "Here 's" a bunch of information that leads you to 'the answer'. The search feature so standard did not help.

  Then I tried to do this by using the tool to delete (obviously not the application of writing!) because it allows me to search for multiple words or phrases, however it is not highlight what page both are found. I tried to turn on the preference to enable deletions of comments and even if it meant that I could then go through all the comments, it's still not faster than my document is more than 1,000 pages, which meant there were too many total comments for me to be able to easily identify which page had both.

  Any ideas?

  There is no built-in way to search for two strings and limited to show only the results that appear on the same page.

  It can be done by using a custom script, however.

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A