Looking for reviews - Server Configuration requirements

Similar Questions

• Looking for review on the Satellite L50-A00V

  I can't find a review on this laptop anywhere on the internet.

  Maybe he has a different model number in other countries.

  Someone met with a review of the Toshiba L50-A00V laptop?

  Hello

  The L50-A00V Satellite was released for the Australian market.
  You can find the technical page here: http://www.mytoshiba.com.au/products/computers/satellite/l50/psklna-00v001/specifications

  Models Satellite L50 published in other countries takes in charge the other extension: for example series Satellite L50 PSKLNE (L50T-A) was released in Europe and it is very similar (same) series

• You are looking for a slight configuration for Satellite M100

  Hi, people.

  Recently (last night) given my M100 a clean install with a XP disc.

  No, however there are a few driver problems: no internet connection etc.
  I was hoping to avoid to make a full recovery, as I don't want all the stuff of processor-downturn accompanying the release of the configuration box.

  The reason why I did the install clean was because the thing fell slowly on the first day and I was told by a chapter that it was because there was a lot of unnecessary things running in the background.

  I wonder how I can go about setting up my laptop in the most simplified way possible.
  I want to only use: Office, internet, itunes, and MS Money.
  I guess I need the battery driver thing and really sure without wire/no modem driver, but what else?

  If someone could give advice, I would be very grateful.
  Is it possible to use the very selective recovery disk?

  Cheers for your help.
  Slooter.

  Well, I would recommend installing common drivers like LAN/WLan driver, driver sound, touchpad, chipset Intel graphics driver.
  Here are the key drivers that are really needed.

  Other tools and utilities can be installed but it of not really needed and your laptop will work also correctly without additional software.

• I'm looking for a server for 3-5 guests

  It is a pity that the Mac mini is not more than the 'server' is sold. Just what I need. Buying used is not an option.

  There is a doctor's office. The database must be running there and a quad core would be a very good idea. Two small SSDS are needed. Earlier, there was the Mac mini server perfect for databases of this size.

  But what you take right now?

  All Mac Mini are now dual-core, the Mac Pro is too big and with graphics cards, so unnecessary for these tasks.

  And now?

  Are you sure that it is not a current Mac Mini at the height? EMI would be very unusual CPU for the neck of the bottle. I have the Minis 2014 serving up to 230 MB/s (servile ethernet and RAID drives) and the CPU is rarely more than 10% use.

  Don't dismiss the Mini as a solution until you have borrowed a road-tested.

  C.

• SocketServer - LOOK - for client-server (P - P type of) problem

  I'm doing use of socketServer of Air to build a server that will act as a host for other playBook users to connect to... In simple terms trying to build a server that will be can be hosted by the user of the application. But I am not able to get this working. Any help will be greatly appreciated...

  Thank you very much...

  Kind regards

  SID.

  You can use the AIR/Flash Player API called NetGroup and GroupSpecifier to use NetConnection of RTMFP to create a local multicast scenario. This allows communication between AIR applications on the same network and discovery. This means that you can use in you applications PlayBook and ask them to find each and communicate. Here is the source code for a game that uses this technique I've been do demonstrations lately, and more precisely an application I have demo would be the events of MeetThePlayBook.

  http://Renaun.com/blog/2010/12/pickquick-source-code/

• Network configuration required for VIO with VDS integration

  You are looking for assistance with the requirements of network for a new installation VIO, I plan.

  Requirements, I see that it takes 3 VLAN

  API with 5 IPs

  Management with 18 IPs

  Provider with x IPs

  I plan this configuration will be in a network of laboratories. My plan is to use a subnet I can connect to in the laboratory for the vlan API I will need access to the dashboard VIO etc..

  For two other VLANs, I was going to use two private ip ranges

  My question is, pole management provide connectivity/routing between these 3 VLAN or do you need to configure a router out to route between the 3 VLAN?

  Any help appreciated

  Your layout looks ok and should be good.

  I don't understand what you mean by 'cluster management provide a connectivity/routing between these 3 VLAN... '. » ? The routing between these VLANS is up to you. VIO didn't need connectivity amongst these VLAN that is to say that they can be separated segments without any L3 L2.

  However, must the hosts in the cluster Management, be transmitted to each of these VLANs. See the section "Physical networking" in the little quick start guide more color on the L2/L3 amongst connectivity these VLANS.

  Please feel free to expand on your question and provide you with a more precise guidance.

  Arvind

• set up a local test for coldfusion server 9

  I could use help with this thread in coldfusion forum...

  local test for coldfusion server configuration 9 w dreamweaver on mac

  http://forums.Adobe.com/thread/773350

  Thank you

  I am marking THIS as presumed replied, as you seem to have solved the problem in the other thread.

• utility for documenting the ESXi server configuration?

  I know that we can use tools of command line following this kb KB VMware: backup and restore ESXi configuration using the vSphere command-line Interface and vSphere PowerCLI...

  to save and restore a configuration of the host.

  But what I'm looking for is a way to 'capture' the current configuration of a particular server, so that I can use this config as a starting point for the construction of host config documentation. The bundle of config which is created by running the command above creates a bunch of text and other files that I think hold configurations, but they do not provide a way to look through the config, or copy and paste easily the different elements.

  Anyone know of a free util that will do something like what I'm looking for?

  Hi TedH256,

  It's easy...  RVTools completely!  It is a simple, lightweight windows install you simply point your vCenter (or $vmhost), and then save the report in Excel.  It creates tabs for everything you can imagine including network vmkernel.  That should be all you need.  Still hungry?  Launch PowerCLI and use vCheck, Reports of CDPand NIC Firmware.

• Configuration of SQL 2008 R2, Enterprise Edition for vCenter Server 5.1

  Greetings to all seasons.

  Kind of a newbie here. That's my lab environment.

  I have always used the vCenter Server install Simple option that also installs the shipped Microsoft SQL 2008 R2 Express edition.

  Now, I do an eval of vSphere 5.1 and I want to manually configure a database server using the Microsoft SQL 2008 R2 Enterprise Edition.

  I know how to install the database server and it works. But I do not know how exactly set up a database for vCenter Server.

  I looked at the guide Configuration / Installation of vSphere and I don't seem to be able to follow the preparation vCenter Server databases section, because I'm not a person to the database. Y at - it any other guide or a blog, I can follow? I searched a lot and found everything I was looking for. Thought I would ask here.

  Here are the virtual machines I have.

  Lab - DC1 (domain controller)

  Lab - DC2 (domain controller)

  Lab-SQL1 (SQL 2008 R2, Enterprise Edition)

  Lab-SQL2 (SQL 2008 R2 Enterprise - subsequently configure failover clustering)

  Lab-VC1(vCenter Server 1)

  Any help is appreciated!

  Happy holidays.  Here is a link to another site with a nice installation guide for SQL 2008 for VMware.  Version 4.x, published in lonesysadmin.net was very helpful, so I'm sure that the 5.x update (have not read through it again) must be all too packed with useful tips.

  http://lonesysadmin.NET/2011/10/06/how-to-install-Microsoft-SQL-Server-2008-R2-for-VMware-vCenter-5/

• What are the requirements for vCenter Server 5?

  What are the requirements for vCenter Server 5?  Specifically, I'm looking at the vCenter Server Appliance but it is set to 8 GB of RAM.  I hope to run it on a lab at home that has only 8 GB etc. total RAM.

  The system requirements are here - http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-installation-setup-guide.pdf

• Should what configuration of iMac I look for to achieve the app development?

  Looking for ideas on cost-effective configuration of office people as for application developers.

  Current processors and disk capacity will be OK for pretty much anything - you'll be happier with more memory and large screens.

• I am looking for a solution Server (with Te css) for the fact that Firefox uses the system DPI settings, which makes my site look (too) big.

  My site appears much too big in firefox. And I want all browsers to view my site properly.
  I know that there are settings wihtin firefox that fix this problem. But I'm looking for a solution on server side, so that visitors to my site must not be disturbed by changing their settings.

  You may need to change your site as soon as 30 Chrome and IE 11 will also use the system DPI setting (like Firefox does now).

  Possible solution:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

• Solution for Bluetooth PAN server configuration

  Task:
  -Internet on Bluetooth PAN profile
  -Connection for laptop (Toshiba Satellite A300 1 2 (WinXP SP2) with Sony Ericsson K810i with BT PAN)
  -Computer as a server of PAN (!). Lance PAN Mobile phone connection-> computer.
  You can use internet to mobile phone to laptop.

  But it's bug in Toshiba PAN-server - right click doesn't work in pan-Server tray :( (Local Russian (?))

  * Configuration server PAN *.
  1. options:
  set of 2 boxes in the Bluetooth dialog options (service of pan, pan DHCP service), the [ok] button
  2. Press win - r, type: cmd
  [ok]
  Enter (case sensitivity "") ":"
  CD "c:\Program Files Toshiba Stack\"
  TosBtPSS.exe /END
  TosBtPSS.exe /NAP

  If it is absent pan server in the status bar - check your network connection BTPAN (Bluetooth Personal Area Network) enabled in the control panel and try
  TosBtPSS.exe /NAP

  ((3 set the IP address for the network BTPAN connectivity: 192.168.0.1 (I don't know how Toshiba DHCP server works, but it works!)))
  You can use your own DHCP server configured...

  You can make these instructions batch file...

  Sorry, my bad English)

  P.S. to the developer of Bluetooth PAN server: fixed a bug, please)

  Thanks for this interesting article.

• Error in the SMTP Configurations for File Server Resource Manager

  Hello

  Please help me how to configure SMTP for file server resource manager, when I have set up SMTP for gmail and godady e-mail I got the error.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I'm looking for an image compatible Windows Server 2003 vmware study the operating system. Anyone know where I can find an image file?

  Original title: Windows Server

  I don't know where to put this question, so here goes I am looking for a picture compatible Windows Server 2003 vmware study the operating system. Anyone know where I can find an image file?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.