Looking for utility hpsetcfg for p 2760

Similar Questions

• I'm looking for a fan for laptops Toshiba control utility

  Hello

  I'm looking for a utility to control the fan for computers laptop toshiba (like i8kfangui for example).

  someone help...

  Hello

  Toshiba does not provide special also for the fan control.
  Only the Toshiba Power saver is available on the page of the driver.
  This utility controls the settings for the processor, processing speed, the cooling method, display brightness, etc.

  Maybe it s an option for you

• Looking for hope in the restoration of my iMac

  My iMac HD has failed, and I took it to Apple to get it replaced. I had a Time Machine backup on an external hard drive Seagate. But my iMac just not see the backup drive Seagate. I don't know if there is a trick to getting the Seagate HD displays. It does not show in Finder or in disk utility. But when the iMac HD was not, and I looked for ways to restore, I saw a Time Machine backup date. Now, I can not see the drive. Even though I have the music and pictures stored in iCloud, all my apps are now gone. I don't know where to start. I was a fool to trust Time Machine? This is literally disastrous for me, and I don't know where to start. What I need, is to see this backup disk somewhere BTW, I plugged on another iMac and he did not see it either. Is there some magic for Seagate HD?

  Some things you can try:

  * Open the Finder preferences (under the Finder menu, top left of your screen). Make sure that on the general tab, the boxes are ticked for hard disks and drives, to show them on your desktop. Otherwise, they won't be visible.

  * Try a new cable. The cable went wrong.

  * Open disk utility when the drive is connected. You can see on the left hand side of the disk utility? If you see an external drive, try to mount in disk utility. If you can ride, the files are available? If this isn't the case, you can run disk utility to try to fix it.

  * Seagate's data recovery services.  http://www.Seagate.com/services-software/recover/ first of all, you can download their software and try it for free. If it can find files on the disk, you can then purchase the license of their recovery software to use to recover your files from the Seagate drive. Alternatively, he can perform the data recovery for you (with supplement). The details are at this link.

  I'm sorry it happened, I wish you good luck.  It seems that your problem could not Time Machine, which is actually a very good backup program; but rather, your external drive seems to have a problem. This happens to all readers subsequently, no last forever and that's why I try to keep at least two backups, each with a different method. For example, one with Time Machine, the other using software such as "clone" (such as SuperDuper, CCC etc.). It is good that you use the cloud at least. I hope that you can recover your files.

• My mac says "Looking for printer.

  I bought D110a yesterday, and after a few soft not to install this printer on my Mac (OS X 10.6.4), I finally got to print... However, not always. By 'not always' I mean a point print at a time, through "reboot" the printer between the prints. If I do not "restart" the printer, the print queue displays "Looking for printer...» ». It will remain in this State indefinitely. When I try to use the HP utility, I get the following message: "HP ink jet is currently unavailable. Please check if it is connected and turned on, or try again later. »

  The printer is powered on and connected. I can access the built-in Web server (which displays the status "Ready"), and the "Print and Fax" menu shows the printer as "Idle" with the green light.

  Some useful facts (?):

  I installed this printer using the HP software provided.

  This printer is used on my wireless network (Linksys WRT610n router)

  I have another printer wireless that works without problem.

  Someone at - it no indication on this topic?

  Uninstall the HP software by using its own uinstaller (in Applications > Hewlett-Packard).

  Restart your Mac.

  Download and install this: http://support.apple.com/kb/DL907

  Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• Looking for the link to download HDD Recovery for Satellite L630

  Hi all

  I'm looking for the DOWNLOAD LINK of recovery of HARD drive to my new Toshiba L630 laptop.
  I read in several positions and the manuals it should be already on my hard drive.
  But this isn't on my hard drive, where it is connected with the restoration of the system, I even created a system restore disk, but there is no trace of any disk HARD Recovery Utility.

  This is the list of files create

  # Created on 2011-03-15 04:00 with Lister directory v0.9

  Name size Date time Attr

  e:\ (1) 175 703 783 -----

  2011-03-12 16:27 r-
  2011-03-12 16:27 r-
  Bootmgr 383 562 2011-03-12 16:27 r -.

  e:\boot\ (3) 3 433 472 2011-03-12 16:27 r -.

  BCD 262 144 2011-03-12 16:27 r -.
  BootFix.bin 1 024 2011-03-12 16:27 r -.
  Boot.SDI 3 170 304 2011-03-12 16:27 r -.

  e:\sources\ (1) 171 886 749 2011-03-12 16:27 r-
  Boot.wim 171 886 749 2011 - 03 - 12 16:27 r -.

  Hello

  HARD drive recovery can not be downloaded.
  You can not download the recovery disc as well.

  Generally, recovery disc HARD must be available on your laptop and you should be able to start this pressing F8 at the beginning of the initialization.
  Simply said: turn on the device, press F8 immediately after the laptop was turned on maybe you will have to press F8 several times in the line
  Then choose fix my computer and then you should see the drive HARD recovery option.

  If this is not available (no matter why), then you must create a recovery disc using called Recovery disk Creator tool that must be preinstalled on the laptop.

  If you are not able to create the recovery disk then you can order it from here:
  http://backupmedia.Toshiba.EU/landing.aspx

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• Satellite A100: looking for a software to control the fan speed

  Hello

  I am looking for software of control/read on my laptop fan speed, because energy does not seem to do anything. It seems not serious if I set the 'method of cooling' to 'Battery optimized' or 'Maximum Performance' or fixed CPU processing speed. I () has installed the Module & Power Saver town a couple of times without success.

  SpeedFan & NHC will not work.

  Hello

  Sorry but I do not share your view on Power saver utility. Do you really believe that Toshiba create tool like that for nothing? Just FYI: public service power saver is not available with Vista operating system and on this forum, you will find topics where people really miss this fun and useful utility.

  In any case, it is well known that many tools that you can find on the internet do not have much influence on laptop cooling fan speed. To be honest, something like that can be very dangerous because the majority of users want to have silent notebooks and overheating problems are totally underestimated.

  Can you please be a bit more specific about your problem? Your laptop is too strong for you or is the short battery life? Why you are not satisfied with this tool?

• Looking for Windows 7 drivers for my new HP computer

  Hello..

  Today I bought a desktop computer HP ENVY Phoenix 810 - 170st CTO (E3W49AV #ABA) and I intend wiping 8 Windows and install my own copy of Windows 7 SP1 64 bit... I DriverMax and as long as I can install a Windows 7 NIC driver and then once I got on the internet then DriverMax should be able to install any other drivers... but I think have drivers HP would be better so I'm curious to know if there is no Windows 7 driver for him? Thank you...

  * Update *.

  I did dig a little on my computers product number and it looks like the card NETWORK on this computer will be the RTL8171EH-GC and another post on this forum-based Windows 7 driver HP seems to be SP57359.exe...

  By my original message, I hope for all the drivers Windows 7 for my new computer but if not, then someone could confirm that the driver of the MAP above will work? Thank you.

  Hello:

  Audio can be a problem.  I don't quite know HP models with drivers W7 for the IDT Audio Codec 92HD89E.

  The rest of the drivers...

  Chip set:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

  Try this audio driver if W7 install an and also try the automatic update of the audio device in Device Manager.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19282&keyword=IDT+audio&DownloadType=drivers&lang=eng

  Ethernet: Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  USB:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=22824&keyword=USB&lang=eng

  Chipset driver will install the most recent drivers sata ahci.

  If your problem is that you can't install W7 as the W7 is looking for disk controller drivers, then proceed as follows:

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and should install W7.

• z820: looking for a software raid manage and view the status of disks hard raid

  HP z820 workstation,

  product # D3J63UT

  I'm looking for raid management software

  

  Thank you.

  I suggest that you follow the steps listed in the HP Document: "Z - series Workstation detection and fixing a hard drive failure within the RAID Controller utility" in the URL: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04474148#N10829 you can find instructions how to enter each State type of RAID (Intel RST, 2308 LSI and LSI 9260-8i controller - It's the main RAID controllers usually associated with the HP Z820 workstation according to the particular configuration you ordered). Note that in most of the cases described in this document, you need to access the configuration of RAID controller during computer startup steps, by pressing CTRL + I (for Intel RST) or CTRL + C (for LSI 2308) or CTRL + H (by LSI 9260-8i). The installation program uses the RAID controller firmware and does not require to install complex inside Windows software, because it is done outside of the Windows operating system before starting. Find more details in "HP Z220 SFF, CMT Z220, Z420, Z620 and Z820 workstations maintenance and Service Guide" in the URL: http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c04205252-1.pdf , in the devices of annex b: Setup RAID (pp. 161-171) all types of RAID controllers that are relevant at the workplace Z820 are discussed.

• Looking for products with specific needs: USB dongle to create WiFi + send traffic through SOCKS proxy

  Hello

  I need a product for a specific use, and it is not easy to obtain the necessary information with the data I found on the web. So I was wondering if anyone knows a Linksys product that fits the need.

  I am looking for a USB dongle to connect to a Windows PC. This USB dongle should * create * a WiFi network and an iPhone would connect to the WiFi LAN. The PC would then play the role of a gateway, that she would share his Internet Ethernet RJ45 connection with the devices connected to created WiFi. In addition, all the WiFi LAN traffic should be sent to a given SOCKS (v5) Proxy (which is actually on localhost).

  You know a product + utility that meets these requirements?

  Thank you in advance!
  Kind regards
  Stone

  This is not actually a function of the adapter wireless and more attached to the PC operating system.

  If you are running a Windows PC is easy. Given that existed in Windows XP Internet connection sharing. It simply comes down to enable Internet sharing on the LAN adapter and assigning the host adapter wireless network connection. Then, you will need to add a wireless Ad - Hoc for your devices in the customer network to connect too. I guess that the wireless adapter must support wireless Ad - Hoc networks, but I think they all do.

  Linux\Mac have similar support sharing Internet.

  There is also software available that you can install to create a hotspot Wi - Fi with your PC.

• Win32k.sys caused BSOD IRQL, looking for likely causes

  While I was recording game for a game with Fraps, I got BSODed with him saying that an IRQL_NOT_LESS_OR_EQUAL error has been generated by win32k.sys.  I have debugged the minidump file and am looking for a reason why it happened.  I don't see anything obvious to said in the report that is generated if:

  Loading dump file [C:\Windows\Minidump\Mini071811-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (4 procs) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 6002.18327.x86fre.vistasp2_gdr.101014 - 0432
  Computer name:
  Core = 0 x 82036000 PsLoadedModuleList = 0x8214dc70
  The debugging session: my Jul 18 22:01:47.823 2011 - 07:00 (UTC).
  System Uptime: 5 days 2:05:24.971
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .........................................
  Loading user symbols
  Loading unloaded module list
  ..................
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck A, {9f5fffe4, 2, 1, 820cbc5b}

  Probably caused by: win32k.sys (win32k! Win32AllocPool + 13)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: 9f5fffe4, memory referenced
  Arg2: 00000002, IRQL
  Arg3: 00000001, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: 820cbc5b, address memory

  Debugging information:
  ------------------

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from 8216d 868
  Cannot read MiSystemVaType memory at 8214d 420
  9f5fffe4

  CURRENT_IRQL: 2

  FAULTING_IP:
  NT! MiUnlinkFreeOrZeroedPage + 87
  820cbc5b 890c 10 mov dword ptr [eax + edx], ecx

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0XA

  Nom_processus: pcsx2 - r4600.exe

  TRAP_FRAME: cac1b9fc-(.trap 0xffffffffcac1b9fc)
  ErrCode = 00000002
  EAX = ebx = 00000023 000010a 8 ecx = 00004600 edx = 00000000 esi = 00000000 edi = f68fc0a8
  EIP = 820eb23a esp = cac1ba70 ebp = cac1bab8 iopl = 0 nv in pe of na EI pl nz nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010206
  NT! ExpAllocateBigPool + 0 x 231:
  820eb23a 895ffc mov dword ptr [edi-4], ebx ds:0023:f68fc0a4 is?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from 820cbc5b to 82083fd9

  STACK_TEXT:
  cac1b7a0 820cbc5b badb0d00 88c8d8b8 83600000 nt! KiTrap0E + 0x2e1
  cac1b824 820cbeaf 00049351 85e44478 400001d 5 nt! MiUnlinkFreeOrZeroedPage + 0 x 87
  cac1b864 820ae467 000001d 5 86399030 c07b47e0 nt! MiRemoveAnyPage + 0x16c
  cac1b8ac 820adce4 00000001 f68fc0a4 c07b47e0 nt! MiResolveDemandZeroFault + 0x2e2
  cac1b968 820cf331 f68fc0a4 00000000 00000000 nt! MiDispatchFault + 0xadb
  cac1b9e4 82083dd4 00000001 f68fc0a4 00000000 nt! MmAccessFault + 0x10c6
  cac1b9e4 820eb23a 00000001 f68fc0a4 00000000 nt! KiTrap0E + 0xdc
  57 000000 has 8 00000021 000010 82123c cac1bab8 has 8 nt! ExpAllocateBigPool + 0 x 231
  00000021 000010a 0 35316847 nt a21664c9 cac1bb18! ExAllocatePoolWithTag + 0 x 116
  cac1bb2c a214a4aa 000010a 0 35316847 and 00000000 win32k! Win32AllocPool + 0x13
  cac1bb40 a216a2ee 000010 has 0 cac1bbe4 35316847 win32k! PALLOCMEM + 0X18
  cac1bb5c a214a88d 000010a 0 00000001 and 00000005 win32k! AllocateObject + 0 x 97
  cac1bb94 a21533c1 00000000 00000000 00000080 win32k! SURFMEM::bCreateDIB + 0x21d
  cac1bc48 a2127c98 01010052 00000000 00000000 win32k! GreCreateDIBitmapReal + 0x320
  cac1bce4 a2127f35 085a805c 00000000 00000000 win32k! _InternalGetIconInfo + 0xbe
  cac1bd44 82080c7a 00010003 085a805c 00000000 win32k! NtUserGetIconInfo + 0xf1
  cac1bd44 77d75ca4 00010003 085a805c 00000000 nt! KiFastCallEntry + 0x12a
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  00000000 00000000 00000000 00000000 0x77d75ca4 085a803c

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  Win32k! Win32AllocPool + 13
  5 d a21664c9 pop ebp

  SYMBOL_STACK_INDEX: 9

  SYMBOL_NAME: win32k! Win32AllocPool + 13

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: win32k

  Nom_image: win32k.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4d6f96aa

  FAILURE_BUCKET_ID: 0xA_win32k! Win32AllocPool + 13

  BUCKET_ID: 0xA_win32k! Win32AllocPool + 13

  Follow-up: MachineOwner
  ---------

  So far, this was the only time where I had it coming, but I have not tried from new record yet.  Actively running programs are FireFox, Pcsx2 and Fraps.  However, I ran these before without this issue arise.  I'm inclined to think that this is a time to screw that maybe something has been registered correctly or incorrectly read memory.

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
  a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
  Tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Looking for Compaq Presario C500 series driver SATA

  I have a Compaq Presario C551TU (C500 series).

  Mobile Intel (r) 945GM/GMS/940GML Express Chipset or Intel(r) 945GT Express Chipset

  (result of the Intel chipset identification utility)

  Memory controller:

  82945gm/GMS/82940GML or 82945GT

  I/o Controller:

  Intel(r) i/o controller 82801GBM (ICH7M)

  And I have a drive hard Hitachi HTS541680J9SA00-support SATA.

  I'm looking for SATA controller for this

  Thank you.

  If you have had success with witout XP SATA driver installation, there is no need to worry about this. Do not install Intel Chipset_that is the motherboard drivers.

• Aspire One D255E don't look for a printer connected to the USB port

  My D255E an Aspire don't look for a printer connected to the USB port.  I've never used a printer on this computer before.  Windows 7 Starter will support a printer?

  It should be.  Try these steps and results reports:

  When you turn on and connect the printer via USB, shows tasks for animation in the system tray at the right end of the bar, click it and monitor driver installation.  If the pilot goes then printer must print and perhaps scanning of base via the Windows fax and scanning utility.  To find such a piece of utility type its name in the search box.

  If the driver does not load type of devices and printers in the box to start the search, open it, check if printer is already displayed, right-click on it to open the properties, and try to print a Test page. If it does not print right click on printer again to solve problems.

  If the printer is not listed visit Support downloads of the printer Web page to download and install the base driver.  If a wireless printer, you will need the complete package to do it fully implemented.  If you want to be able to scan from the top of the printer to the PC, then you also need the full package.  Keep track of the configuration screens when you install the software.

  If you still have problems after return the exact error with photos if possible.

• Device problem: "Master UDS Bus of Kernal USB driver software Bus by TCP is not installed. Looking for driver fails.

  New install of Win 7.  Control Panel >... > devices and printers: problem with the computer. Convenience store ran with results: "pilot of Master NODES Bus of Kernal USB software Bus by TCP is not installed. Looking for driver fails.

  Note: the only known problem I have is that I can't print to a printer USB connected in local (HP 5280).  Curious, the printer PC utility I can print a test page.  Microsoft Office 2007 apps, not printing.

  I get the same error message.

  It seems to be related to my D - Link DIR-655 Router and software (offered through D-Link) called "SharePort," which allows the USB port at the back of the router to use for networking!

  I have 5 PCs on my home network and printer. With installed Shareport, I connected my printer to the router via the USB port. I don't have to have the computer on it, I used initially to install the printer.

  To access the printer on any PC, I just have the icon in my taskbar.

  The error message is displayed because, by default, SharePort is closed and it reads it as "not installed"!

  I used it with Vista and Windows 7 Ultimate x 32 and x 64 with no problems!

  Just as with the 'coprocessor' "impossible to install driver" error message, I uninstalled them in (several times) Device Manager and the error messages no longer appear!

  So, in my case, the messages themselves were the only mistake!

  FYO: Coprocessor refers to hardware devices such as fingerprint security to access your PC, instead of a password!

  I hope this has been helpful!

• I'm looking for a way to scan my system with Windows 7 registry entries

  I'm looking for a way to scan my system registry entries. Registry audit tool (Scanreg.exe) to do back in the day, is there something similar in Windows 7?

  * original title - command line - tool of the registry in Windows 7? *

  Hello

  If you think that you are missing something you get a sense that what you're missing. Then, look for the registry.

  There are 3rd party registry cleaners that erasing entries that lead anywhere as far as I KNOW, he didn't y no utility that can guess what program can use the registry and entry is missing.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows usually looking for new updates

  I tried to update to windows 8 and he's trying to update, then a message appears that says: there was a problem looking for updates and then an error code A 8024, 000.  I've been using get with this error and need me to troubleshoot windows update and it does its thing and when its done it says potential database error windows update detected 0 x 80073712 fixed - update windows components need to be repaired fixed, then I go and try to update again and the same thing I get the message that says : there was a problem, you're looking for an update with an error code of 8024a 000

  Clean boot and try the updates of Windows - http://support2.microsoft.com/kb/929135

  or

  Windows Update error 0x8024a000
  http://Windows.Microsoft.com/en-AU/Windows-8/Windows-Update-error-0x8024a000

  If you receive the Windows Update 0x8024a000 or 8024a 000 error when you use Windows Update, the cause may be an interruption of the connection between your computer and the Windows Update service. Here are a few methods you can try to solve this problem.

  Run the Windows Update troubleshooting tool

  • Open and run the Windows Update Troubleshooter to fix the problem automatically.

  Run the troubleshooter for Internet connections

  • Open the network troubleshooter utility by hitting at full speed in the straight edge screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the identification and repair in the area of research and then tapping or identify and repair network problems.

  Try to solve connection problems

  • To troubleshoot your Internet connection, see How to solve the problems of connection with Windows Update.