looking to upgrade the psu, case and add front pannel 5.25 fans.

Similar Questions

• Looking to upgrade the video card and PSU

  Product number of the P7 - 1012 QP762AA #ABA - I am running Windows 7 64 bit. Just bought the system today. So far so good, except for the graphics. It has 2 x 1 PCI-E slots (wish it was 16 x, but it's ok). I heard that PCI-e x 1 video cards are not as popular as they were back in the early 2000s.

  I'm looking for graphics cards decent (between $ 100-150) I can do a few games on (I have not so much on the quality of the games, but more on the performance. My power is 250 watts max.

  Thanks for your replies

  This is what it means, more or less. Your computer uses the integrated graphics card ATI Radeon 3000 and installation of an AMD Radeon HD5450 or ION will give some improvement but the PCIe x 1 bus hold you back.

  Frank

• Can I keep my itunes account in the United Kingdom and add applications to the United States on my account so that the United States pls.?

  Can I keep my itunes account in the United Kingdom and add applications to the United States on my account so that the United States pls.?

  How long you will be in the United States? To use the US store, you must be physically located in the United States, have issued US credit card and billing address in the United States on this credit card. Without it, you won't be able to change for the US store. And, you can only change stores every 90 days.

• How to upgrade the audio, video and game controllers on Windows XP Home Edition?

  Original title: SoundMAX Integrated Digital Audio

  How to upgrade the audio, video and game controllers on Windows XP Home Edition?

  I need SoundMAX Integrated Digital Audio

  Hello

  Why you trying to update the audio, video and game controllers?

  The following steps may be helpful:

  1. open the Device Manager.

  2. Locate the audio, video and game controllers and expand it.

  3 click the sound card, and then click Update driver.

  For more information: http://support.microsoft.com/kb/283658

• I need to upgrade the CPU, motherboard and RAM in my machine. Which will impact my Activation of Windows genuine?

  I need to upgrade the CPU, motherboard and Ram in my machine. Which will impact my Activation of Windows genuine?

  original title: can I put my machine after GWA?

  It's a Genuine Windows Kit which is what you would be considered a retail license. In other words, that it is transferable to another computer, which means you have the right to support directly from Microsoft.

• Access table in the arraycollection collection and add the item at the end of the table

  for
  
  
  "login_user":"XXX"},i);
  
  //mess2=sess_MessArr[i2];
  //mess1=dispArray[i2].fwchat_message
  
  //searchArray(mess2);}
  
  
  
  
  
  (var i:int = 0; i< dispArray.length; ++i){
  
  dispArray[i]. 
  dispArray.addItemAt({
  

  
  I have this code to try to access the values in the table in the arraycollection collection, but that's not it actually creates a value at the end of the arraycollection collection. can someone tell me what im doing wrong I basically want retransmits the individual tables in the arraycollection collection and add Login_user

  So, I guess your ArrayCollection collection holds an array of objects, as follows:

  public var myAC:ArrayCollection = new ArrayCollection([{first:"bob",last:"smith"},{first:"jim",last:"jones"},{first:"mary",last:"allen"}]);
  

  And you try to add a new property of login_user to each of them, right?

  for each (var obj:Object in myAC) {
       obj.login_user = obj.first + "83";
  }
  

  Each person would be firstly, properties last and login_user.  In my example above, all the login_user would set their name + number 83, so adjust you accordingly for your application.

  It is the ease (for each rock for this situation).  However, if you want to paste the iterative approach, you have published, you can try this:

  for (var i:int = 0; i < myAC.length; i++) {
       myAC.getItemAt(i).login_user = myAC.getItemAt(i).first + "83";
  }
  

  I think that the for each syntax is clearer, but anyway works the way I think you want.

• Y at - it a utility to monitor the speed, temperature and cpu/gpu for desektop m9200T fan?

  My desktop running Win7 Home Premium m9200T computer crashes often.  It seems to be associated with temperature.

  I tried SpeedFan, but my computer crashed whenever I ran it.  The SpeedFan 20 window scroll a few lines of text that the computer crashed.  Y at - it a utility to monitor the speed, temperature and cpu/gpu for desektop m9200T fan?

  PC Wizzard works well on my computer.

  Thanks Big_dave.

• After installing Lightroom 10 CC 2015, Photoshop CC 2015 windows does not start and Illustrator CC 2015 freezes after startup. It look like that the program (or maybe add ons) need to dll of the CC + 2008 with isn't so more recordable in Windows 10

  Has anyone have the same problem and maybe a Solution?

  Hey mksuperplus,

  Please check this link Windows 10 update breaks Microsoft Adobe CC - missing - MSVCR110.dll community for the solution.

  Kind regards

  Nicos

• Upgrade the HARD drive and install SSD XP to Windows 7 upgrade - which command?

  I want to make some improvements to my trusty HP XP media center PC m7350n.  Ideally, here's what I want to do in a certain order:

  -upgrade the HARD drive (currently 250 and 500 GB installed, replace with 750 unique?)

  -install an SSD as boot drive (60 to 120 GB?)

  -Reinstall XP restore disks media center

  -do a upgrade 'clean' for win 7 Home premium (64 bit?) from the disc "upgrading"

  The Windows 7 upgrade disk looks like for XP/Vista, so I can't put new hardware and go directly to a cost of Win 7 install.

  Plan a.

  I understand the look of for the minimum size of disks restore disks.  All guess what SSD size would be the minimum? I guess the upgrade of the first hard drive and reinstall XP MC since the restore disks would be trivial (as opposed to their use after a motherboard replacement).  If I have XP MC on the SDS, it is only a reason any Win 7 no upgade SDS?

  Plan B

  If I install the SSD after upgrade to Windows 7, I guess I have to use something like a disk copy program to the boot from SSD HARD disk partition.  SUGESTIONS?

  Plan C

  Restoration of SKIP.  Move existing partitions of 250 and 500 GB drives to 750.  Update for Win 7.  Install an SSD.  Move the boot partition.  Use the same drive for both copy program?

  Am I missing something?

  In case anyone is wondering, I have a spare 750Go drive and the Windows 7 upgrade disk so the only "cost" of this update is to purchase the SSD (and if necessary disk copy program).

  Thank you!

  Don

  donprice11 wrote... I want to make some improvements to my trusty HP XP media center PC m7350n.  Ideally, here's what I want to do in a certain order:

  -upgrade the HARD drive (currently 250 and 500 GB installed, replace with 750 unique?)

  -install an SSD as boot drive (60 to 120 GB?)

  -Reinstall XP restore disks media center

  -do a upgrade 'clean' for win 7 Home premium (64 bit?) from the disc "upgrading"

  The Windows 7 upgrade disk looks like for XP/Vista, so I can't put new hardware and go directly to a cost of Win 7 install.

  Don,

  Please read this article by Paul Thurrott more "Clean install Windows 7 with upgrade media '. It essentially says you can make a completely clean install on a drive with no operating system. The key is not to enter the COA product key after installation is complete. I, myself, installed Windows 7 to discs using disks 'upgrade' several times without problems of installation or activation. The order I do it with, is as follows:

  1 copy all the files and folders of the 250 and the 500 GB HDD of 750 GB.

  2. remove the 250 GB, 500 GB and 750 GB of computer hard drives.

  3. install the SSD.

  4. install Windows 7 on the SSD without entering the product key.

  5. Once finished Windows 7 installation, enter the product key and activate Windows.

  6. return old hard disks of computer as needed.

  7. install purchased software and Windows updates if necessary.

  You should go to 4 GB of RAM to get the most out of Windows 7 64 bit and you can upgrade your graphics card.

  Note: You will lose all software provided CVS Windows XP on your m7350n. Make sure that you create your HP recovery discs before you proceed with the change of equipment or install Windows 7. Your HP recovery disks can have the factory included HP software... it may or may not work with Windows 7. Good luck and let us know how it turns out.

• Upgrading the video card and power supply, these will work with my system?

  Hello, I am wanting to update my graphics card as my current one is finally fall behind on current games, BF3 beta is a restless nighmare and BC2 must be smooth running low (ick). I was satisfied with the weaker graphics for now, but its time for an upgrade. In any case, I think I have my selected updates and I just want to confirm that they will work with my computer until I pull the trigger. My current equipment:

  HP p6180t

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4010451&LC=en&cc=us&DLC=en&lang=en&tmp_track_link...

  Intel Core2 Quad 2.83 GHZ

  8.00 GB RAM DDR3

  Vista 64-bit

  Creative Sound Blaster X - Fi Audio Xrteme

  1.5 GB NVIDEA GeForce GT230 [DVI, HDMI, VGA]

  I plan on upgrading the graphics card on an Asus NVIDEA GeForce GTX 560 (Fermi)

  http://www.Newegg.com/product/product.aspx?item=N82E16814121446

  And the power of a passionate Corsair 850W 80 + CERT (I know this is perhaps an exaggeration, but I can update to motherboards in the future to run two SLI cards and do not want to upgrade again)

  http://www.Newegg.com/product/product.aspx?item=17-139-009&SortField=0&SummaryType=0&PageSize=10&PUR...

  I removed the side panel to check the dimensions of the new card and it looks like it fits. The only thing that could be a problem of release the cables SATA for the hard drive and hard drive because they are both plugged into the two slots, I don't think that the two superiors would be no problem at all. Depending on the thickness of the new card is also, it may be very close to the sound card that is spaced only a slit above the graphics card. I have another location available PCIe x 1 go back one level more that I should be able to plug the sound card in if there is no problem.

  My question is that these two will be compatible with my system? (physical limitations side)

  Also, can I change which SATA plug the hard drive and disc plug in, without having to reformat? Is it just unplug and plug in the new housing? (setting power off + unplugged of course) Basically passing SATA0 and SATA1, SATA2, and SATA3. Or do need to be filled in order? (0 then 1 then 2, etc...)

  Finally, If I can't move the sound of a standard card, do I need to do anything other than the physically move when the computer is turned off and unplugged?

  Any help is appreciated, thanks!

  John

  jkalbin,

  You have thought through all scenerios. Move the sound card does not any problems. The hard drive should stay in header SATA 0.

• You are looking to upgrade the video card on HP p6213w to PCI-Express x 16 GTS 250

  I'm looking to upgrade my p6213w integrated to a PCI-Express x 16 GTS 250 video card video graphics. I have already updated to an Antec TP-550 power supply, anyone have suggestions on which GTS 250 fits on the card mother p6213w? Or has someone already updated their HP Pavilion p6213w with a video card PCI-Express x 16 and if so... one that adapts (brand, model, etc).

  I am interested in the PNY GTS 250 1024 MB PCIe Reference No.. VCGGTS2501XPB but wasn't sure if this map of space.

  Help or knowledge of those who have a HP Pavilion p6213w and installed a new PCI-Express x 16 video card would be greatly appreciated.

  Thanks in advance.

  I couldn't find all the steps for the PNY graphics card.  However, the XFX GTS 250 1 GB is 9.0 "x 4,367 x 1.5".  It's a double profile (two locations).  You can measure the space for the card.  Measure from the inside edge of the case across the motherboard where the PCIE x 16 slot.  It is the approximate length of the card that fits.  You must be certain that a card double profile will fit, too.

• Upgrade the hard drive and OSX

  I have a macbook pro 2009 environment.  He was bought with Snow Leopard, but now running the Mavericks.  I'm looking to upgrade to SSD drive, but I don't want to clone each update of Snow Leopard for the Mavericks.  I was wondering if there was a simpler solution that: Copping files on an external drive, install the SSD with Snow leopard, then the upgrade to the Mavericks and reloading files.  Any other suggestions/easier way would be appreciated!

  Thank you

  The easy way is to clone your current HDD to the SSD. Then you would start from where you are today.

• Pavilion dv6: looking to upgrade the processor in my laptop

  I was looking to upgrade my current CPU to an i7 which would be compatible with my motherboard are there?

  CENTRAL PROCESSING UNIT

  Intel Core i5 2450 M @ 2.50 GHz

  RAM
  16.0 GB Dual-Channel DDR3 @ 665 MHz (9-9-9-24)

  Motherboard
  Hewlett-Packard 17FC (CPU1)

  Graphics
  Monitor generic PnP (1366x768@60Hz)
  Intel HD Graphics 3000 (HP)

  Hello
  
  Your laptop's card with Intel Dual core with UMA graphics card and the USB 3.0 version.
  
  The high processor upgrade possible, without changing the Board of Directors is 2640M i7 dual core (HP 666173-001 part number). Not much of a performance gain.
  
  If you want to upgrade to QuadCore i7 (i7 quad core 2860QM), you have to replace the Board of Directors. It'll be better buying a new laptop with the better than going to this costly upgrade card.
  
  Manual - Page 25-27: http://h10032.www1.hp.com/ctg/Manual/c03099531
  
  Source: http://support.hp.com/us-en/product/HP-Pavilion-dv6-Entertainment-Notebook-PC-series/5191856/model/5218555/manuals
  
  Data sheet: http://support.hp.com/us-en/document/c03127146
  
  Concerning
  
  Visruth

• Windows Media Player-how delete the audio files in the WMP library and add album art

  How can I get rid of dublicate on WMP songs? How can I get all the cover art?

  To make WMP automatically look for the cover, make sure retrieve additional information from the Internet are checked in Tools - Options - Library (press Ctrl + M, if you don't see the Tools menu). The only add missing information option is recommended.

  Regarding duplicates, I suggest that you try to reset the media library. Note firstly reset the library will make you lose all play counts and ratings too. Then, follow these steps:

  -Restart the PC.
  -Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service. If its status is started, double-click on the service and click on stop.
  -Click Start, type %LOCALAPPDATA%\Microsoft in the search field and press ENTER. This folder opens in Windows Explorer.
  -In this file, rename the old Media Player like Media Player folder. If you do not see the folder, then it is probably hidden. Set Explorer to view the hidden files and folders and show protected system files.
  -Launch WMP, your library will have been reset and will be rebuilt. Check if the problem persists.

• Do we need to purchase the license to upgrade the VCS, VCSe and TMS?

  Hello

  We need to get a new license when upgraded version of VCS, VCSe and TMS?

  Hi Kelvin,

  xxx. OVA files are package files to deploy the VCS on virtualize platforms.

  Release key are required to upgrade the VCS for major updates. for p. ex. upgrade of x 6 x 7 software version worm.

  However for improvements minor as x7.2 to x7.2.2 these are the released hotfix version or bux fixes release and you don't need a license for this upgrade.

  in any case if you your devices are less covered by valid contract you can get the license key anytime just contact cisco license team on "[email protected] / * /" and they should be able to provide the necessary license.

  Rgds

  Alok