Lose a provisioning when moving from model space to the workspace configuration

Similar Questions

• Windows Explorer crashes when moving from one network to the other card

  Hi people,

  Here's my problem: I suspect his cause and resolution will be very simple, but I can't find an answer until now.

  I use a laptop Windows XP SP3, joined to a domain in native mode Windows 2003.
  As is common these days, the portable computer is multihomed, with a card Intel Gigabit Ethernet and Intel combined 802.11n / Bluetooth adapter.

  My problem is this: I often need to take me off the cable to the office network and join a wireless network. This is how I can access our assets via public IP addresses to avoid NAT issues ' ing. In general, I do this simply by pulling the ethernet cable, then activation of the wireless adapter and join the required network. Note tehre is no firewall or filtering with the wireless network, and it uses NAT.

  In about 10 seconds, Windows Explorer will be locked up for about 15 seconds, then return to life. This behavior is repeated on what seems a fairly short cycle, perhaps every minute.

  While I think it could be linked to the machine looking for domain resources, the command binding adapter or similar, I was unable to make an impact on this behavior.

  If I return the config by disabling my adapter wireless and reconnect the wired adapter, everything returns to normal and performance is as expected.

  I have not tried to change binding adapter - my wireless adapter was higher than the wired NETWORK adapter already but seemed worth - no dice.
  I also tried releasing the config on the wired adapter, DNS and ARP cache flush, and then connect the wi - fi. See no difference.

  I'd love to hear any constructive suggestions how to solve this problem; attempts to use ProcMon and Wireshark for the cause were unsuccessful, but maybe I'm looking at the wrong data.

  Let me know what you might like information and I'll see if I can give him.

  Thank you

  Stevie

  Hi Stevie,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• How do Camera Raw to open in PS, when moving from a BRUTE from LR image?

  How do Camera Raw to open in PS, when moving from a BRUTE from LR image?

  I know there must be an easier way.  I can not open no matter what I do.

  Hi RusticDiva,

  Silkrooster is correct on Lightroom. However, if you have Photoshop CC you can use Camera Raw as a filter to make additional changes to Camera RAW:

• When browsing from a page of the site appears "unable to connect" Although no connection problem

  When browsing from a page of the site appears "unable to connect".

  Hi Helen,

  Thanks for posting your query in Microsoft Community.

  Unfortunately, the question is not clear, please answer these questions so that we can understand the problem and help you better.

  1. which web browser you are using?

  2. what site you're talking about?

  3. this happens with all sites or with any specific Web site?

  4. What is the exact error message you are getting?

  5 have had any changes made to the computer before the show?

  If you are using Internet Explorer, follow the steps in the link.

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897

  NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  We would be more than happy to help you if the steps above did not solve the problem.

• Lightroom 2015 5.5 lose selection field legend when moving from image to image

  The latest version 2015 5.5 on mac, broke the ability for lightroom to have the field legend selected when moving the image to the image, to use the mouse to select again the caption field whenever I have switch from one image to another, this is not a major problem but does not slow down subtitle when have to write captions for a large number of images.

  Can it be returned to the next version?

  Please add your vote and detailed opinion to this bug report: 2015.5 Lightroom: don't keep the focus in Keywording boxes or title. Community customer Photoshop family. Even though Adobe has acknowledged the bug, which does not necessarily that it will be fixed in the next version.  Your vote and opinion makes it (slightly) more likely Adobe will give priority to a solution, and you will be immediately notified of updates to the question.

• Help! JavaScript works not when the object is moved from one page to the other!

  Hi all:

  I am new to Adobe Livecycle Designer (version 8.0). I created an interactive pdf form of 3 pages with many objects (text fields, radio buttons, drop-down lists, etc.), our company wants to quickly start to use.

  I'm having trouble with some of my Javascript does not not with some of my items on page 2 of the form. Specifically, there is a drop down menu to "Country" on page 2 of my form. When the user selects, for example, 'United States' in the list, I have the Javascript code that is supposed to change the 'currency' list drop-down to "Dollars" rawValue accordingly (on the change event).

  I think that my Javascript syntax is correct, but I am not sure. Here's my simple Javascript associated with the "Country" drop-down list (Note: rawValue 80 = 'United States' and 105 rawValue = "US $"):

  -

  ---

  Form1. Page1.cmbContactInfoCountry::change :-(JavaScript, client).

  ---

  If (this.rawValue == 80) {}

  cmbCurrency.rawValue = 105;

  }

  It sounds pretty simple and it WORKS when my "Country" drop-down list is moved to page 1 of the form, but it WON'T WORK when I move the combo box "Country" return to page 2 of the form (i.e. where it belongs).

  Anyone has suggestions or solutions? I spent probably 6-8 hours of racking my brain trying to figure out why it works when on a single page, but it does not work when to move to another page. I guess I can have corrupted something OR that I not address fully the proper name of the object?

  Help, please!

  Frustrated and helpless, near Chicago.

  Taylor T

  Yes, it's a quirk of... in the drop-down lists when you select an item in the DOF it is not committed until you exit the field, unless you do the following:

  If (this.boundItem (xfa.event.newText) == 1) {}

  cmbCurrency.rawValue = 1;

  }

  ElseIf (this.boundItem (xfa.event.newText) == 2) {}

  cmbCurrency.rawValue = 2;

  }

  The xfa.resolveNode stuff was not necessary that both objects are of the same subform, and as such can 'see' each other.

  Think like a folder structure subforms - elements can see what is in their own folder but will say where to find things in other folders. If cmbCountry was subform1 and cmbCurrency was so in subform2 that rawValue above lines would look like:

  subform2.cmbCurrency.RawValue = 1;

  It's a good idea to name all your objects, subforms, etc. it is to work with script is much easier - so you won't have to deal with things like these pieces of xfa.resolveNode you had before (as well). He ones because you have more than one subform called "subform", the number of hooks is the Instance number (when you have several of the same object) if the program has to differentiate between the various "subform".

  The number of instance come in handy, but for things like the rows of the table and so on when you need to make calculations.

• My PowerConnect 6248 switch loses its settings when disconnected from the power

  Hello

  I'll put up a PowerConnect 6248 switch on my local network through Web interface (I can't use serial to do).

  I put the IP, login, password, a LAG, SNTP server address, etc.

  It works fine until I unplugged the power cord to the switch to simulate a power outage. When I plugged in the power cord, the switch will reboot by displaying its default settings and I release all of mine.

  Y at - it a specific command, I missed to save all my settings in the switch?

  Thank you for your help.

  Pascal.

  The switch has two separate configuration locations, a running configuration and startup configuration. This allows you to change configuration and test running before engaging them in the startup configuration. Once you have the running configuration, how you want it, you need to run the # copy running-config startup-config command, or just copy # run start.

  See you soon

• Firefox will not print on my HP PSC 750 printer and loses all formatting when you try to print to the printer Brother HL-5240

  I have no problem with one of my printers when printing 11.7 before or IE 6.0.2800.1106 but cannot print from Firefox 3.6.13 (or earlier).
  When you try to print to the HP PSC 750 inkjet printer, a "Print" dialog box appears, showing the title: xyz and a progress meter showing 100%, but it's be covered almost immediately by a second dialog box stating "an unknown error has occurred while printing" and, even if the continuous printer saying 'impression', no printing is taking place.

  When you try to print to the Brother HL-5240 laser printer, printing will take place, but all formatting is lost and what comes out is a block of text unintelligible running.

  What can / should I do to get Firefox to print correctly on my two printers?

  1. print.print_printer reappears after printing something. This pref is the last printer used, so when you reset the prefs it does not appear until you print something.

  2. that your problem with printer HP reappeared quickly, try a new profile.
  
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

  3. with regard to the preferences for the old printers, if reset you these Pref they don't come back (assuming that you do not select accidentally printers or printer drivers are uninstalled).

• Screen fade slowly when changing from one page to the other

  Original title: melted screen

  Why my not to screen a slow fade when changing from one page to another.  Did not until recently.

  Hello

  1. what operating system is installed on your computer?

  2 are. what page you referring?

  3. when exactly are you facing this problem?

  4. have you made changes on the computer before this problem?

  If you use the Windows 7 operating system, you can follow the methods.

  Method 1:

  You can see the issue in the clean boot state. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  I suggest you run the calibration of the colors of the display on the computer and check if it works.

  Calibrate your screen

  http://Windows.Microsoft.com/en-us/Windows7/calibrate-your-display

  Method 3:

  You can run the troubleshooter of display quality and check.

  Open the troubleshooter of display quality

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 4:

  You can try to update the display adapter driver by visiting the manufacturer's Web site to download and install the latest driver package.

  For more information: update a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  It will be useful.

• Download a pdf file, save, won't show the full name of the backup file when name contains a space, stop the name of the file.

  Download a pdf file, the file name contains a space in the middle of the file. The name showing on the 'Save' popup is first letters up to space. Works fine on IE8. For example, a file named "old snail_12345.pdf" would show only 'old' (ignore the "s"). This is on Firefox 30.0, WinXP Pro.

  Apparently, there is an extension to work around this problem. I have not tried myself. See:

  http://KB.mozillazine.org/Filenames_with_spaces_are_truncated_upon_download

• BUG: Breaks VMware Fusion when there is free space on the host < 1.9 GB... result = > 1,9 GB never use for anything! (note: I do not use a virtual disk!)

  Hello

  first some info on my system:

  -

  ---

  MacBook Pro

  Processor: Core 2 Duo 2.2 GHz

  RAM: 4 GB

  HARD drive: 112 Go - 2 partitions (80 GB Mac OS x 10.5.6 32GB, Windows XP)

  ---

  VMware Fusion version: 2.0.4 (other affected versions 2.0.3/2.0.2/2.0.1/2.0)

  Allocated to the virtual machine RAM: 1.5 GB

  Under Windows XP in VMware (boot_camp) partition separated - NO VIRTUAL DRIVE! -separate the NTFS partition.

  -

  ---

  Now the bug/problem:

  Every time that free up disk space on the host partition (MacOsX) becomes less than 1.9 GB the VMware Fusion makes a break with this runtime message:

  -

  ---

  VMware Fusion has suspended this virtual machine because the disk on which the virtual machine is stored is almost full.

  To continue, free at least 1.9 GB of disk space.

  -

  ---

  Please prove me wrong, but makes no sense to me, because the result is that these 1.9 GB is never used (or VMware) :-(

  In advance, VMware Fusion allocates approximately 1.9 GB whenever the virtual machine is started then in my opinion this runtime check is redundant and the audit should run only before you start the virtual machine.

  Anyone know how to move this bug to developers or solve the problem?

  It's very annoying not being able to use almost 2 GB of disk space :-(

  Thanks for all the relevant answers :-)

  This is not a Bug! and this is the expected behavior to avoid crashing on OS X and or damage to the system as a result of unexpectedly running out of space.

  If you are currently running disks tight on space you have a bigger problem then do what it's programmed to do my protect the stability of the system, because the user is not paying attention to the State of their own Fusion system.

  Free and maintain a suitable available space as required by the programs that you use, and how they are used.

  It's a result of error of the end user, because you shouldn't be filling your drives and should always maintain a reasonable percentage of free space.

• Essbase Error (1013289) when you run a report in the workspace 11.1.2.1

  Hi gurus,

  I get the following error at the whe Workspace, you try to run a report EN to the workspace:

  Query error: error: internal error Essbase JAPI: [cannot perform view cube operation. ] [ Essbase Error (1013289): command [MdxReport] failed due to memory allocation failure]

  This is the first time happened in this environment and I already checked the free memory space and everything seems fine.

  Could someone help me on this?

  Thanks in advance

  concerning

  To the right...

  I found the solution after reading the article on https://blogs.oracle.com/pa/entry/epm_11_1_2_ulimit

  Thank you

• Satellite L25-S1192: WLan disconnect when moving from router

  I looked in the nets, and I can't find an answer to my exact problem.

  I have a laptop Satellite L25-S1192 and XP running.
  My problem is the Wi - Fi works very well until I'm 10-15 feet away from the router.

  Once I get beyond that point, I lose the connection even if when I display the network connections it shows that I'm still have an excellent signal and always connected. Other laptops work in the House and I did several other tests to rule out the router.
  I updated the driver but nothing seems to help.

  Given that the connection is working near the top which tells me the settings are correct.

  What Miss me?
  Any help is appreciated.

  Hello

  In my view there is nothing wrong.
  The WiFi signal seems to be too low and therefore the WiFi disconnects.

  I think that this happens when you run Notepad with battery operation. Right?

  Well, you can go to Device Manager-> properties-> Advanced tab Wlan card
  There you can check if the WiFi network is set to mode harder

• Pavilion 15-p077TX: my HP Pavilion p077TX 15 notebook freezes when moved from its position

  Whenever I move my laptop from its position, it freezes. As I kept my phone on my bed and I pick it up and place it on my lap then it crashes / freezes. So every time I have to remove the battery and put it again whenever this happens. Sometimes twice a day. It gets really frustrating whenever you do something important. So what I can make of this is that whenever I move the laptop to a certain speed, it freezes, it means that something inside it moves from its ideal location (doesn't happen when I move it very slowly).

  Any cause of definte and the solution?

  Thank you

  Jousset

  Hi @krum02,
   
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15 - p077tx and concerns with closing while moving Notepad. I recommend that you only take the laptop to a repair center to find the part that is loose. You can check your warranty here.

  Please let me know how it goes.

  You can say thanks for trying to help, by clicking on the Thumbs Up below! .

  Thank you.

• Emails disappear when moved from junk Inbox, why?

  When I get an email, usually from a friend or someone in my address book, and he's going to the junk e-mail folder, when I try to move it to the Inbox, it disappears. I learned to make a copy of the Inbox, but it is yet to appear. If I move it to another folder, there is no problem, it presents itself. I mark the email as being not junk until I try to move it. I noticed that when I highlight the folders to move, there is no Inbox on the list.

  Ask yourself why he's going to the junk e-mail folder. I think this happens because Thunderbird made a mistake and you have to teach it what is and is not junk to help stop repeating this mistake.

  Mark the message as not junk and this will help reduce the frequency of these evil categorizations and it will result in the message being delivered where it belongs.

  How to mark as legitimate?

  1. You right-click, select Mark as and then not smut.
  2. You can press J (note that tiny j brands like spam, capital J as legitimate brands).
  3. The add-on JunQuilla presents two buttons to your toolbar.

  In theory, Thunderbird not Junk messages from people who appear in your address book. Can you confirm that the senders of these messages appear in your address book?