Lose resources between reading and writing on a format plugin

Similar Questions

• simultaneous reading and writing on a PDM file

  I found similar discussions on here, but none that satisfied my problem. I'm running several loops within a vi, which writes data in a permanently .tdms file. Another loop to finish its task from the start in a test, and I want to transition this loop so that it accesses the file writing and started writing on a network. It also enables me to check that the data is being stored in the file and that it is corrupt.

  I started with just the basics, but when I pass the second loop to read the file that is is always written off mistakes, saying that she met at the end of the file. It does if I put the count 1, -1 or anything in between. It illuminates, however, the end of the file output.

  I have the entry in the file tdms on PDM read wired to a local variable, just as I do writing PDM, they all have both read the same thing and I get an iterations of a data value of the reading, so, apparently, file access is no problem. And I have to someone who cringed to local variables, ensure that reading and writing are not activated until the local variable is updated.

  Try to set the "group name" entry on «TDMS read» If you write more than one group, you can use "View the contents of the DDHN" in order to get a list of groups.

  Herbert

• simultaneous reading and writing files TDMS

  A customer had a program written in 8.6; the programmer is no longer available and I'm looking to debug intermittent problems.

  N - channels of data is acquired and streamed to a PDM file. The operator can select a channel to view data in real time, but the display is one scope table displaying 15 seconds worth of data and when switching of channels the program "returns" display with the last 15 seconds of a data value of the new string (barrier data extracted from the TDMS file).

  What I notice here, aside from using sloppy cluster error, is that both references are open in the file - one for writing data and the other for recovery data. Is this a good practice? is it necessary or one reference supports the reading and writing? Is this a possible source of problems?

  

  thanx

  lmd2

  You can do the same thing with a single file reference.

  The issue of not being able to see the data that was written after the reading of reference has been opened is known for having refnums to open in two different processes, but not in the same executable or VI.

  Herbert

• Reading and writing data XML of BC4J

  Hello!
  
  I try to reproduce "27.7 reading and writing XML data" chapter of 'Developer Framework of developing applications for forms/4GL developers's Guide. "
  Our intention is to read and write at first only XML.
  However, it seems that we need this chapter a database connection.
  To shorten this assessment - is it possible to adf bc only with xml?
  
  Kind regards
  Torsten

  The solution is described in "27.8 Using programmatic view objects from other Sources of data" in the doc you mentioned. If you use programmatic EO/VO you can do almost what you what to store data. We use xml for some data (but always store in the DB) and read it.

  Timo

• Reading and writing VISA function

  Hi all

  I am trying to record data from Server series (which has 16 ports) through com ports (I use total 7 ports).

  Here, I'd understand the VISA service.

  Question 1

  If I want to just save data (from the server), can I still write VISA function to read from COM1?

  Or

  Can I just use VISA based only on read and read the string of com port data?

  Question 2

  After I save data of type string, I'll save in a text file.

  But what I see inside the save file is just a raw string of data (which I can't read).

  How to cut data type string in different reading (different record like the tension, the ammeter reading and on/off switch)?

  Please advise...

  Question 1 – it depends on what is the other end of the serial port. If it's broadcasting data all the time, a reading is all you need. If she needs a command to send you information, then you will need both. Look at the definition of communication protocol for what you are trying to read.

  Question 2 - do you need to format. There are a lot of string screws on the palette of the string manipulation, not knowing how the string is formatted at all to start I can not give you advice more than that. An example of the way you write to file, and what you do with the data received can be useful... If the data is coming from a long series, if all goes well there are separators and a chain analysis helps you to highlight if you need to. If you read each port in turn and concatanting just a string, put a constant of the tab between them (available on the palette of strings), or no matter what other delimiter you want to use for that matter. Otherwise, if they are all in the field of fixed-length subset of string vi could be a way to go.

• reading and writing to the file on SD card

  I am currently using this code to read and write to files (credit is not because of me - I found these on the Board somewhere):

     private void writeFile(String data, String filePath)
      {
          try
          {
              FileConnection conn = (FileConnection)Connector.open(filePath,Connector.READ_WRITE);
              if (!conn.exists())
              {
                  Dialog.alert("No File Present Click to Create");
                  conn.create();
              }
  
              OutputStream out = conn.openOutputStream();
              byte[] b = data.trim().getBytes();
              String sb = new String(b);
              System.out.println("Bytes to String: " + sb);
  
              if(sb.length() == 0 )
                  System.out.println("String length is zero");
              else
                  System.out.println("String length is not zero" + sb.length());
  
              if(conn.canWrite())
              {
                  Dialog.alert("Writing");
                  out.write(b,0,sb.length());
              }
              else
                  System.out.println("Cannot write to this file");
  
              System.out.println("File Size is : "+ conn.fileSize());
              out.flush();
              out.close();
          }
          catch(Exception io)
          {
              test.setText("Exceptino Thrown from File" +io);
          }
  
      }
  
      private String readFile(String filePath)
      {
          try
          {
              FileConnection fconn = (FileConnection)Connector.open(filePath, Connector.READ);
              if (fconn.exists())
              {
                  InputStream input = fconn.openInputStream();
  
                  ByteArrayOutputStream baos = new ByteArrayOutputStream();
                  int j = 0;
                  while((j=input.read()) != -1) {
                      baos.write(j);
                  }
                  byte[] data = baos.toByteArray();
                  input.close();
  
                  String output = new String(data);
                  System.out.println("Output" + output);
  
                  fconn.close();
                  return output;
              }
              else
              {
                  System.out.println("File does not exist");
                  fconn.close();
                  return null;
              }
          }
          catch (Exception ioe) {
  
             System.out.println("Error:   " + ioe.toString());
             return null;
          }
  
      }
  

  When I try to write a string to a file and then read it again, I get a NullPointerException. When I check the folder that mimicks card SD card on my pc, there is no file created. is the above code ok?

  P.S. I use a simulator of the OS 5.0 and the SD card directory is configured to be somewhere on my desk.

  It is incredibly baroque and inefficient code for a simple job; be happy that you do not claim credit for it.

  A problem may be that the FileConnection in writeFile is not closed. I would rewrite the mess like this (leaving a part of the diagnostic output):

  private void writeFile(String data, String filePath) {  data = data.trim();  OutputStream out = null;  FileConnection conn = null;  try {     conn = (FileConnection) Connector.open(filePath,Connector.READ_WRITE);    if (!conn.exists()) {      conn.create();    }    OutputStream out = conn.openOutputStream();    // it might be advisable to specify an encoding on the next line.    out.write(data.getBytes());  } catch (Exception io) {    test.setText("Exception Thrown from File " + io);  } finally {    if (out != null) try { out.close(); } catch (IOException ignored) {}    if (fconn != null) try { fconn.close(); } catch (IOException ignored) {}  }}
  
  private String readFile(String filePath) {  String result = null;  InputStream input = null;  FileConnection conn = null;  try {    fconn = (FileConnection) Connector.open(filePath, Connector.READ);    if (fconn.exists()) {      input = fconn.openInputStream();      byte[] bytes = IOUtilities.streamToBytes(input);      // it might be advisable to specify an encoding on the next line.      result = new String(bytes);    } else {      System.out.println("File does not exist");    }  } catch (Exception ioe) {    System.out.println("Error: " + ioe.toString());  } finally {    if (input != null) try { input.close(); } catch (IOException ignored) {}    if (fconn != null) try { fconn.close(); } catch (IOException ignored) {}  }  return result;}
  

• Reading and writing Excel File

  Hi all. I need your help. I need to know how to read EXCEL FILE and insert it into a table of some. Also, can someone tell me how to write in an EXCEL FILE?
  
  Thank you in advance.

  READING EXCEL
  There are several options how read file - ODBC, excel on a fly--> conversion to CSV excel (if you have 11.2 and you want to use tables external preprocessor),... I put (I think all) of the options on my BLOG http://jiri.wordpress.com/2010/01/04/load-ms-excel-file-to-oracle-database/

  WRITING IN EXCEL
  Writing in excel is delicate because there is no direct way of Oracle, here are a few tips

  1 JAVA - you can create java stored procedure, I did not test this, but it's probably doable http://www.java-tips.org/other-api-tips/jexcel/how-to-create-an-excel-file.html

  2. XML Excel format - you can use UTL_FILE and writing to XML Excel can read http://blogs.msdn.com/b/brian_jones/archive/2005/06/27/433152.aspx

  3 Excel also reads the CSV files, but it's file plan text without formatting. You can use UTL_FILE to easily create a CSV (comma-delimited) file and read from excel, I have some examples on my blog http://jiri.wordpress.com/2009/03/18/oracle-fast-parallel-data-unload-into-ascii-files/

• Why my drive hard Boot keep reading and writing for 20 minutes after the start?

  As the title says my HDD Boot continues to read and write for about 20 minutes after the start. Read and write up to 10 GB in the process. I would say a good way to destroy a disc. I have not seen this behavior in any other OS.

  10.10.5 OS version

  Model: Mac Pro

  ID: MacPro3, 1

  Processor: Intel Quad-Core Xeon

  Number of processors: 2

  Total number of cores: 8

  (Vivid RAM) memory: 8 GB

  Any help will be greatly appreciated.

  Thank you.

  Check Console.app and see what happens.   Could be something of a time Machine for Spotlight indexing to a process of runaway of an OS X or a bug in the application.

• Reading and writing a file

  I'm trying to read and write to a file so that I can store a string array and a double in my application, but I came out a few problems; Firstly when I put my path in the constant path he will say that the file is not there never be (so I have to force the issue and when the application requests a file I have to browse and add files), secondly when I run the program and it reads in the file it does not display the strings or double immediately instead , I must hit the submit button and what they finally, finally arrive when I reset my values in the .txt files and put in my thong and double and press on submit table jumps in one place and starts at index 1 (array [1]) if anyone can help I would appreciate it a lot.

  Here is my code:

  That's what I wanted to say on the structure of the event and it should take your second problem.  I don't see the third one.  I saw no flicker, but I have a slight vision problem which means I do not waver.  So he can sparkle.  Or maybe not.

• What is error 39 in reading and writing media and how can I fix this windows xp

  I / ve worked with a compaq pc and when I look at my device manager my read and write devices has a yellow flag on them. I uninstalled sought a driver more recent all posible so far. the computer reads the plug and Play, but then I get this error 39 thing. I'm no guy warned, but I can read instructions. CAN SOMEONE PLEASE HELP. IT WILL BE GREATLY APPRECIATED.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Mr. Fix it cannot fix the DVD/CD, reading and writing problem

  I had a problem a few months ago this onc I put a CD in the CD/DVD drive, it can't read and rejected and ask to put a readable CD, then I run Mr. Fix and the problem disappeared. recently just the same problem, I tried Mr.Fix but it cannot solve the problem, then it is there another way to solve the problem

  Best regards

  Ramzi salameh

  Hello

  Step 1: Please do all the same underneath if you did some before as it is often the set of operations which solves the problem.

  Try this double click Control Panel - Device Manager - CD/DVD - device - tab - click on update drivers (this will probably do nothing) - then RIGHT click the drive of the driver - UNINSTALL - REBOOT this will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then work your way through these - don't forget the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs - a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables at both ends. Remove and replace, do not just tight. For laptops, you can often clean power and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some entries in the registry that the troubleshooter does not solve, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the correct registry entries for your car.

  These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more information here and maybe even registry settings correct for your CD/DVD from someone with the same drive model.

  Forums - much real experts help and hardware information
  http://Club.myce.com/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• TSST corp CDDVDW TS-L633B stopped reading and writing

  I have a laptop Acer 4736Z with a TSST corp CDDVDW TS-L633B DVD - RW, so decide simply ceased to read and write DVDs and CDs. When I insert a blank dvd, it will ask me to burn files to it but when I do, it complements the habit and will the useless DVDs. When I insert CD or DVD, the drive does not read it more.

  Please help me on how to solve this problem.
  Thank you

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting might not help if there are problems of alignment and wear it
  is worth it.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack. Even if the disc is not
  shown continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other
  programs - a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you
  upgrade to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the
  Setup Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check
  in both ends of the cables. Remove and replace, do not just tight. For portable computers, you can
  Often, clean power and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system
  Designer and manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
  (Read burn CD & DVD and CD and DVD). It's not unusual for 1 or 2 parts to not
  function, while others do so correctly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  some registry entries that do not fix the resolution of problems and those who 'could' be the
  cause.

  Check with your system manufacturer Maker and device for these two possible firmware updates
  and the correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the subkeys of the CD/DVD drive
  of course there will be other subkeys in these keys. Do not forget to ask specific keys
  in question as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even right for registry settings
  your CD/DVD from someone with the same drive model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager,
  that displays all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• conflict between Reader and Acrobat, read aloud

  I installed Reader 9 on a pc. Read aloud worked well. Then install Acrobat test. Now ROL in does not. Try to read the text, it produces sounds without meaning, as if the software became Dyslexic.  Any ideas?

  Thank you

  Installation of Reader and Acrobat is not recommended. If I were you, I remove all traces of both and reinstall the one I want to keep.

• Various errors between Lightroom and Jeffrey "Export to Flickr" Plugin Flickr

  Greetings.

  It is really just a FYI forum post, in the hope that the error messages I received can help users of plugin from Adobe or Jeffrey Friedl; its export-to-flickr plugin has been much more reliable than the default of Macromedia, but it still gets errors sometimes - I attribute this especially on Flickr when it happens, but some of the error messages that I can't decipher, and devs can learn more.

  Last week, in a single session of Lightroom, within two hours, the plugin has failed several times to download over and over again, and the following errors have been systematically posted:

  

  

  (it was weird, because all images are imported at the same time, but 4 of them were given the status read-only; I attribute this to Lightroom).

  

  

  (of course Flickr abandoned connection - so frustrating.)

  

  (this happened many - totally no descriptive error!)

  Again, these are FYI only - I guess that the thread is 'closed' as soon as I 'opened it"- but I hope this helps devs on either end make their software communicate better with each other.

  
  See you soon.

  I get similar messages. Sometimes to download 100 images, I have to restart the download 10 times. Sometimes I can't download a special Collection to publish Smart for a month, it will not just download and then as if by magic, the next time it downloads.

  Jeffrey told me by e-mail that his plugin simply reports messages from Flickr, so all the problems are problems caused by Flickr.

  I think part of the problem is the parent company of that than yahoo Flickr! is in trouble, and the money and resources to maintain and improve the Flickr just isn't what it should be.

• Software for reading and writing of trigger

  Hello

  My goal: generate a sine wave for output to a channel BNC-2110 (connected to a speaker), listen to the sound from the speaker generates via 4 microphones (separated by a known distance) and save lag (or the phase difference) between each microphone. The moment in this regard must be very precise, and I'm having a little trouble by issuing a command to trigger.

  What I would do, it's the departure of DAQmxRead data and some time after use (controllable) DAQmxWrite start display the signal. This way I can see where the signal begins to write. I also want to make sure that the DAQmxRead continue to record a little after (also controllable delay) finishes DAQmxWrite, to make sure that I collect all of the signal.

  Secondly, I would like to assure you that I am not wasting resources on my computer by continually check whether the signal DAQmx has finished sending, and so I'm quite happy to record using the method of the finite samples. If I know how long the pulse is + my two departure delays and find yourself, I can calculate the total recording time and finished so samples is good enough. Which should reduce to nothing the need for a while loop?

  The process goes something like this:

  --> Continuous playback playback--> continue reading--> reading of finishing--> output
  Delay time known--> Start--> finishing Writing written

  My main problem is that I don't know how to create a "dependent software time based event trigger", and I don't know how to make sure that each DAQmxWrite/reading is ready to start to go before I have send the trigger for them. Any suggestions?

  AHA! The synchronization problem has been in the task. I had activated the recording and the default directory was not on my hard drive - I wrote continuously on the network! Works fine now.