Basic Terminal commands does not

Similar Questions

• Diagnostic test Exchange fails with 'Quest remote command does not work.

  I configured vFoglight and monitoring Exchange in a lab. When I run the diganostics Exchage test I get error "Quest romoting command does not work. I made sure that the agent's account "RUN as Service" applied.  Any ideas as to what may be causing this?

  Hello

  We look at your environment. Please open a case of pension.

  Sincerely

• UC520 # squeeze flash: command does not exist - need help

  Hi all
  I am having trouble with a UC520. After the update, removal and the phoneloads to the flash Uploader: memory, it is almost full. (But there should be more space available).
  When I use the command display flash: or dir/all/recursive flash: the UC500 told me there are 4.505.600 bytes available (123.678.720 bytes used) my card flash 128 Mr. but when I the sum of simple files file sizes it is only 64.543.836 bytes so it must at least be free 60Mbytes.
  After some research, I think that the problem is that the flash is fragmented or files where not propperly / entirely deleted.
  To resolve this problem Cisco offers the command squeeze . But this command does not exist on the CPU. How to solve this problem, do you have any suggestions?
  -Patrick

  Wow. I have no idea this is.

  I guess you can back them up and get down them. Maybe after some research on orphans' on flash iOS.

• Why "bgp bestpath missing-as-worst med" command does not produce the desired result?

  Can dear all, someone tell me why "bgp bestpath missing-as-worst med" command does not produce the desired result?
  And I use GNS3 to this practice, the IOS Version: 12.4 (3)
  TKS...

  Back to the beginning:
  192.168.23.0/24 192.168.12.0/24
  RA(F0/0)-(f0/0) RB (s2/0) - RC (s2/0)
  [AS1]                    [AS2]                    [AS3]

  Configuration:
  * RA *:
  A #do sh run (config - router). b r b
  router bgp 1
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  192.168.12.2 neighbor remote-2
  setmed map of nearby route 192.168.12.2 out
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  setmed allowed 10 route map
  the metric value 20

  * RB *:
  B (config - router) #do sh run | b r b
  router bgp 2
  no synchronization
  BGP always-compare-med
  The log-neighbor BGP-changes
  BGP bestpath missing-as-worst med
  neighbor 192.168.12.1 distance-1
  neighbour 192.168.23.3 distance-3
  No Auto-resume

  * RC *:
  C (config - router) #do sh run | b r b
  router bgp 3
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  neighbour 192.168.23.2 distance-2
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  But when I checked out table RB bgp, as below:

  B (config - router) #do sh ip bgp
  BGP table version is 2, local router ID is 192.168.23.2
  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
  r SIDE-failure, stale S
  Source codes: i - IGP, e - EGP,? -incomplete
  Network Next Hop path metrics LocPrf weight
  * > 1.1.1.0/24 192.168.23.3 0 0 3 I
  *                          192.168.12.1            20                         0  1 i

  The prefix is assigned a MED of 0, but also the best path value when I use "bgp bestpath missing-as-worst med" in how to configure bgp... :-(

  Please take a look at the discussion on the configuration of drugs to an eBGP neighbor:

  https://supportforums.Cisco.com/thread/343397?TSTART=0

  Note that BGP MED is set to 0 even if the injected BGP route from a connected route.

  The first time I came across this problem sending MED was there in a picture of 5-6 years service provider. Routes were injected into BGP with the command 'network', has been validated by OSPF routes or static to null0. Involuntary consignment of drugs was mess with load balancing between 2 links of our inbound traffic from the same upstream service provider.

  Also note that if a route is learned via iBGP, border router removes MED before the road to advertising for an eBGP peers (i.e. the above comments apply a when a route is injected locally into the border and then router BGP sent to an eBGP peer).

  I don't know what the cause of the problem that you said in your last post. It delivers last for a long time or that it does not change after a while?

  p.s. Sorry, I edited post because I said "iBGP" instead of "eBGP" at some point.

• Why not default shortcut keyboard to show/hide baseline grid (opt + command +') does not work?

  Why not default shortcut keyboard to show/hide baseline grid (opt + command +') does not work?

  Thank you! Who took care of her!

• Terminal cd command does not properly

  I use to try to direct me to a subfolder, and when I do, I first use the 'ls' command to list the contents of the directory that I'm terminal. Next I use the command "cd" followed by a space and the name of the following folder or subfolder I would go in next. All this worked fine until I came across a folder, I called 'Russian project '. When I type "cd Russian project" I am told by terminal which "-bash: cd: Russia: no such file or directory". This is simply not true. I see in my viewfinder clear as day, I can even do an ls on the containing folder and it's there. How can I fixed terminal then he will see what is there?

  Cannot have spaces in the terminal commands. Try the Russian\ cd projects / or cd "Russian projects.

• Failed authentication, ARD 3.8, Terminal solution does not work

  Hello

  I'm on an iMac running OS 10.11.3, using 3.8 ARD to administer the computer of my children, which also runs OS 10.11.3.

  I have the remote administration and remote login enabled on the computer of those of children, and ARD has worked very well for about a week. But suddenly today, I get the error "Authentication failed" when I try to access the other computer. Double checked the system settings, but all distance options are always checked "on".

  I found this article with instructions on how to use the Terminal to fix the problem, but it's not helping:

  Re: How do you define the computer so that you can see with Remote Desktop?

  I pasted the second chain of command 'sudo' in the article, its replacement by the? with ssh address for computer of those children. But I just get a "command not found".

  Any advice?

  I'm guessing that your portion of the IPS via DHCP.

  If that's true, my first guest would be that the IP address has changed.

  If you run the scanner, see if it displays the IP address of the computer you are trying to connect to. If it is empty, the IP address has changed and no longer 'find '.

  You can try to search using 'Hello' and try to connect and it will resolve to the new IP address.

  If this does not work, see if a new account has been created, or if the user name has changed on the workstation.

  Keep me posted and we can get it is resolved. those are the most common causes of the error you described.

• Terminal Server does not

  Recently, I was going through the process of obtaining ImageMagick with the (sudo port install ImageMagick). I installed and like Xcode 3.2.6.  Then I installed MacPorts 2.3.4 10.6 Snow Leopard. Then I opened the terminal. The connection has shown. I put 'sudo port install ImageMagick... '  Then he asked me to administrator password, when I tried to type, it wasn't showing my text. Then I left it. Now, he opens with no login screen. And ive tried a few commands sudo and just does not respond to me. I can always type commands. It does not respond / apparently do not. I tried the reset, hard reset. Nothing yet. What should I do? What I screw up?

  Nevermind, I solved it simply.

• I upgraded to ois9.3.3 and now my voice command does not work

  Yesterday, I did the upgrade of the ois 9.3.3 and since my voice command will not work.  I searched the internet for advice on how to fix but nothing that they suggest work.  How can I get rid of this upgrade and go back to what I had which works or solve this problem.  I need voice control for I can be hands-free while driving.

  Have you tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo come back? You won't lose data by doing this, but he cn cure some problems after installing new software or applications.

  Have you tried to downgrade from iOS?

• N command does not open a new window on Safari

  I recently noticed this. But I can not press this shortcut command + N (⌘+ N) to open a new window. I can open new tabs by pressing command-Tand even of new private browsing windows by pressing ⌘ + SHIFT + N.

  There are no shortcuts in my preference in System Preferences that have been changed. It does not work when I try to set the shortcuts app for Safari for new window command-N. It does not work when I set up a different shortcut such as command + P to this effect.

  I have OS X El Capitan 10.11.3 on Macbook Pro 2011 Unibody Early 2011 with the new Bluetooth wireless (from 2012) card, optical drive, replaced by original HDD and an SSD installed in place of the original one.

  Is it possible that my physical changes cause these weird problems. I hope not.

  Quit Safari (in the menu),

  Select the Apple-> ForceQuit menu» Finder, it will relaunch the Finder.

  Safari should behave normally after that.

• Toshiba Canvio Basics HARD drive does not appear in my computer

  Hello

  I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc

  Please help and Windows 7 or windows 8.1 PC do the same thing.

  Hello

  I found the description of the product of this external HARD disk:

  Product features:
  • USB 3.0 - powered portable add-on storage.
  • Voltage of bus capable USB, no need for AC adapter.
  • Easy to use with no software to install.
  • Adapts to large digital files with spacious storage capacity.
  • Protect your drive (internal shock sensor and ramp loading technology).

  Specifications
  • Capacity: 1.0 TB
  • Interface: USB 3.0
  • Transfer rate: up to 5 Gb/s
  • Speed: 5 400 rpm
  • Average access time: 12ms
  • Cache buffer: 8 MB

  It is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
  The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
  Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable

• Tilde shortcut command does not work

  I changed some keyboard shortcuts in the preferences system recently and never since the command ~ shortcut does not work.  I tried that in Chrome and Xcode, the apps that I use most, it won't work and I get the loud beep error System.  I posted the stack overflow, but received no response.  I did some research and reset my shortcuts keyboard by default, but this did not work.  I'm more frustrated as I use it in development, and there is no obvious solution on google.

  Look in system-> keyboard-> shortcuts preferences.

  

• Windows 7 Home Basic: custom Option does not appear

  I have windows 7 home basic when I right click on the desktop customization option does not appear and I can't change the color of my task bar.pleaase help me

  Hi Matrix

  Missing customization is normal because Windows 7 Home Basic Edition does not support themes. See the following article for an explanation.

  The "Customize" option is missing from the drop desktop on Windows 7 Home Edition basic

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Windows 7 Home Basic preview window does not

  I'm using Windows 7 Home Basic Edition. I used to have overview of the taskbar, but I don't know what happened, he magically turned back into a bar with a title and never change. I don't know that it is not Aero problem because my computer is not installed Aero.

  I don't have no 'turn on the composition of the office' in the box. What should I do?

  If what I suggested does not resolve your problem, please do not mark as answer.

  Most peole who come to help do not bother to open a response message.

  Here are 2 tutorials which show you want to 'turn on' Aero win 7 Home Basic Edition. They both require downloading a program of "facilitator."
  The first link is to a VERY respectable and reliable source. I vouch for its safety and feasibility.
  A 2nd, I'm not familiar with.

  http://www.SevenForums.com/tutorials/53651-Aero-enable-unsupported-editions-Windows-7-a.html

  http://www.AddictiveTips.com/Windows-tips/enable-Aero-in-Windows-7-Home-Basic/

  excerpt from the 1st link:
  Your machine must still meet the minimum hardware requirements before it can run Aero.

  For the Basic Home Edition users: Aero does not mean that transparency will be activated. Only the Aero taskbar thumbnails and perhaps a few other features will be turned on by this utility. There is no way to enable transparency on Windows Edition basic family.

• the color chart "load" command does not in InDesign 2014 and 2015

  The "load the color chart" command in the Panel color chart does not in InDesign 2014 and 2015. Cannot click the Pantone or any other collection, they are all faded.  I have already trashed the Preferences folder and restarted ID and Mac. It started only once I have updated to the latest version of CC, but now it affects 2014 and 2015.  Don't know what to do, I don't like reinstalling one or the other.  Tried to go back to the CS6.  All solutions anyone?  Thank you!

  

  Color chart of load control is for loading samples from other documents or a swatch file.

  Use the new swatch command to add a color.