to say an error message: DotMac Sync Client has stopped working

Client synchronization DotMac has stopped working... Windows will close the program

http://discussions.Apple.com/thread.jspa?threadID=2475961&TSTART=0 MS - MVP - Elephant Boy computers - don't panic!

Tags: Windows

Similar Questions

  • Windows Live mail - error message: Windows Live Mail has stopped working, a program has caused the blocking of the program works properly...

    At the opening of Windows Live Mail, I get an error message "Windows Live Mail has stopped working" a second error message then cuts in "a problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is not available"Unfortunately Windows does not close the program after waiting for an hour. I managed to twice using the system restore, but that failed even now to solve the problem. I am now resorting to Webmail using the messaging system.

    Windows Live Mail Forum is located here.
    http://www.windowslivehelp.com/forums.aspx?ProductID=15 Bruce Hagen ~ MS - MVP [Mail]

  • My Acer Aspire One with Microsoft Office Windows 7 gives gives thefollowing error message "Microsoft Office Word has stopped working".

    My Acer Aspire One with Microsoft Office Windows 7 gimme gimme thefollowing error message "Microsoft Office Word has stopped working" is followed by "Windows is checking for a solution to the problem," then to "Windows try to recoverthe information" sometimes, he is able to recover and sometimes not. This can happen several times within 5-10 min.

    I'm almost illiterate with these things.

    Any help

    Thank you

    Original title: error message

    Go to programs-> Microsoft Office-> Office-> Office Diagnostics Tools.

    To test your installation

    You can also control panel-> programs and features. Select Microsoft Office in the list and select Edit in the upper part. The second Dialogue should offer the repair option.

  • Error message "Windows Media Center has stopped working" what Xbox Live is connected.

    Original title: TRY XBOX LIVE WITH WINDOWS MEDIA CENTER UI

    I have some setting wrong my XBOX Live interface with my computer. I get the message "windows media center has stopped working", immediately after the seizure of the 8-digit code provided by X - box in Windows Media Center. I dropped my firewall, I also allow all programs and open all ports to come through my firewall. What else can I try to remedy? Thanks, Cliff.

    Hey, Cliff,

    1. what operating system is installed on your computer?

    2. Windows Media Center works great if you do not connect Xbox Live?

    Follow the step in the article below and check if it helps.

    While trying to use your Xbox 360 as a Media Center Extender console, you receive the error message: "Media Center has stopped working".

    http://support.Microsoft.com/kb/932343/en-US (Applicable to Windows Vista)

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Receive error message: "Dell support center has stopped working".

    original title: dellsupport center has stopped working. I do not have anything to do with again, todo with DELL SUP [PORT CENTRE.if it does not stop I take legal action]

    If she does not stop im, legal action, it's harassment. I don't want anything to do with DELL SUPPORT CENTER

    Hello

    1. when exactly you receive the error message?

    2. What is the brand of computer?

    3 did you changes to the computer before the show?

    Method 1: Follow the steps in the following link and check if that helps.

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=427832

    Method 2: If the problem persists then, ffollow these steps and check if you receive the same error message.

    Step 1: Try to boot in safe mode and check if the problem persists. Check out the following link to start the computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2: If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.

    http://support.Microsoft.com/kb/929135

    Note: when you are finished troubleshooting, follow step 7 article to start on normal startup.

  • Error message "Windows Live Messenger has stopped working"

    "Windows Live Messenger has stopped working" Message appears when I try to sign in my e-mail to check my e-mail messages. Whats up with that? I have to go through my hotmail to get my e-mail messages. Has anyone else had the same problem? Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Please repost your question in the forums of the Live Messenger portal at: http://windowslivehelp.com/product.aspx?productid=2.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Continuous error message: Dell Support Center has stopped working

    I have Windows V8ista on an Inspiron530s. With any surgery, I keep getting the following massage:

    "Dell Support Center Has Stopped Working                                                                                                                                                  Caused A problem blocking the program works correctly. Windows will close the program and notify you if a solution is available. " For several weeks, I tried to find out the reason for the error message. It will appear in a small box several times per hour during any operation. (internet or a document) I find no answers in any forum. I have a printer All in one HP that I uninstalled & reinstalled the software, for, at the suggestion of another, but that has not solved the problem.

    AT the SAME TIME: I have Trend Micro Internet Security, (aka PC-Cillion) and although the firewall & defenses are up, I can't scan the computer for viruses. I spoke with trend micro Tech Support 4 times on the phone and various changes have been made, but not thhas solution. They seem to think that the problem is related to this error message.  I'm really tired. Can anyone help?  :?/

    Best advice would be to uninstall the DSS. As you find that it causes more problems then it helps.  Go to the Control Panel programs and features and are looking for Dell support Center and uninstall it.

  • Error message: check of Vista has stopped working

    ARG.
    After that a few days of use, I get this error:
    Registration of Vista has stopped working.

    This happens every time I restart the computer.
    I tried to look around a gace, but I can not even find anything on the subject.

    Anyone who has got any ideas?

    Great info. Thank you for this

  • Error message receiver: alidiskviewer.exe has stopped working when you insert a cd with medical images

    Original title: alidiskviewer.exe has stopped working

    I have inserted a cd with medical images on this subject and received this message. What is a windows or another problem. I ran the diagnostic of fix - it, but this did not help.

    Hello

    This can happen if the file is not compatible with Windows Vista.

    Have you tried the steps by Marilyn O, moderator of the Forum in the previous link to use the compatibility mode of the previous link?

    If you are always faced with the question, then you can search the Alidisk Viewer option in programs and features and even uninstall and check.

    For more information, you can read the following article to uninstall the program.

    Uninstall a program

  • I get the error message "update system tray has stopped working". My Verizon Online backup program doesn't work so not.

    I have Verizon Online Backup.  I get the message above, and then some: "error [System.IO.FileNotFoundException]: SyncNShare\OnlineBackup.SyncNShare.exe.

    Track: To OnlineBackup.Common.Utility.ApplicationLauncher...

    Verizon Online backup is not able to work.

    Hi NancyB_598,

    Thanks for posting in Microsoft Communities. Provide the following information to understand the issue:

    ·         Did you do changes on the computer before the show?

    ·         When exactly do you get this error message?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

    Let us know if you need more assistance. We will be happy to help you.

    Thank you.

  • Microsoft error message "R003. EXE has stopped working and was closed ".

    Anyone know what this means?   Microsoft Windows 'R003. EXE has stopped working and was closed "it doesn't affect my computers operation at all.

    Discussions were merged.

    Deleted duplicate.

    I just found this while trying to get the answer. I gave him a shot and think that it does the trick.

    http://malwaretips.com/blogs/default-tab-search-bar-removal/

  • I get an error message, 'Bluetooth support service' has stopped working.

    Everything worked fine and then suddenly today, my Bluetooth headset icon has disappeared, there is a yellow exclamation mark for an unknown device in Device Manager and I look under the System Configuration and he said that Microsoft Bluetooth Support Service stopped.

    Original title: Microsoft Bluetooth Support Service stopped.

    Hi Cheddar cheese,

     

    Thanks for maintaining this post and share this information with us.

    Method-

    I would have you do the rest of the steps suggested by me in previous post.

    Hope this helps!

  • Message "Windows movie maker has stopped working".

    Original title: Windows Movie Maker

    When you use Windows Movie Maker - the application generates the error message "Windows movie maker has stopped working" and close.  What happened several times.  What can I do to prevent this?  I use Windows 7 and Movie Maker 2011.

    Not sure, but have you tried to reinstall WLMM, or perhaps fix?

    See - http://support.microsoft.com/kb/938275/en-gb and try the repair option first.

    Also, make sure that your graphics card and your PC sound card drivers are up to date. Go to the manufacturers technical support for your PC brand and model site and see if there are newer drivers supported. If there is, and the repair does not help, try them. Make a restore point on your PC first, and if you like you should be able to "roll back" to your existing installation if you need to.

    You can also try a SFC/scannow to see if that detects and repairs problems of any OS if the above does not help.

  • Startup error message: "Microsoft Mobile PC presentation adaptability Client has stopped working".

    I recently tried to install SP2 to Vista, but it failed. I tried all the resolutions posted, but it is not always correct it. Later, I started my Vista (automatically restored to SP1) and it came with a mistake, "Microsoft Mobile PC presentation adaptability Client has stopped working". I tried searching on the net for similar problems, but I could not find any solution. He comes back every time you start, after that the background, shortcuts and the system tray loaded. This error started showing when I tried to install SP2, but he failed and returned to changes. I think that something could have gone wrong and that's why it shows this message.   Today I tried the system restore to the restore point JUST before I tried to install SP2, but it ALSO failed and brought me back to the State.
    I'm not sure if it's related, but I'm also no longer be able to use Windows Media Center, as every time I start it I immediately receive the error message "Media Center has stopped working".
    My computer:
    Gateway M6842B laptop
    Version of Windows Vista SP1 32-bit
    Intel Core 2 CPU
    T5300 @1. 73 GHZ 1.73 GHZ
    2.00 GB OF RAM

    Hi zensurferboi,
     
    First, we will check if we get error safe mode, start the computer in Safe Mode reboot and press the F8 key for about four to five times. You'll see the Mode without failure listed in the advanced window options, select Safe Mode, and then press ENTER.
     
    Check if the error mode without failure.
     
    If the startup error message does not appear safe mode, I recommend you to place the computer in a clean boot state, and check if the problem occurs in a clean boot state.
     
    To put the computer in a clean boot state, follow these steps:
     
    Perform a clean boot
     
    Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
     
    a. log in the computer using an account with administrator rights.
     
    b. click Start , type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
    If you are prompted for an administrator password or for confirmation, type your password, or click continue.
     
    c. under the general tab, click Selective startup, and then clear the Load Startup items check box.
    (The box use the Boot file is not available.)
     
    d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

    Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
     
    e. click OK, and then click restart.
     
    Once the computer restarts, check if you get the error of starting.
     
    Reset the computer to start as usual
     
    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. Click Start , type msconfig.exe in the Start Search box and press ENTER.
    2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
    3. On the general tab, click the Normal startup option, and then click OK.
    4. When you are prompted to restart the computer, click restart.

    If you don't receive the start-up error message after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
     
    How to troubleshoot a problem by performing a clean boot in Windows Vista
     
    http://support.Microsoft.com/kb/929135
     
    I hope this information is useful.
     
    Please let us know if you need further assistance.
     
    Concerning
    Rehman - Microsoft Support

  • at startup I get the error message that the gamevance.exe stop working

    original title: gamevance.exe for vista

    at startup I get the error message that the gamevance.exe stop working, I went to start to delete, but do not have the option to remove it.

    Hi JoAnneKimmey and pugmolly,

    When looking for this, it seems to be malware, so I'll include a link to a useful thread in which you can find a solution:

    How to get rid of malware

Maybe you are looking for

  • K3X66ES G3 255 HP #ABD: HP 255 G3 Hotkey Utility Win 7 Pro

    Hi all could you please tell me where to find a dirver/utility to get the shortcut keys (and fn Key) working with Win 7 Pro 64 Bit? Thank you very much! Best regards Daniel

  • Pavilion a1253w clear BIOS password

    Need to clear the BIOS password when I have F1 in the CMOs settings.  Web site map mother HP is Amberine-GL6E.  I think I've seen the notation on the motherboard for riders to change, but I see no rider.

  • How to restore a computer using xp with missing ntldr.exe?

    I am running Windows XP on 2 computers and on one of them whenever I try to boot after the boot menu, it says the file ntldr.exe is missing on your computer and which is necessary for starting. On the second computer I have, so I would be able to cre

  • Support for Vista change share button does not work

    Hello OK, this is the story: I have PC running Vista, we have an Xbox360 that I shared media with my PC. All of a sudden, it stopped working on the Xbox, I can still see the files on the Xbox, but it will not play any of them. So I go to network and

  • who can I find volume control mixer?

    the volume icon is not displayed in the taskbar on the right side of my p/c? Please help so I can see it and some difficulty in the mixer. Thank you reconuu Lee E-mail address is removed from the privacy *.