Loss of links FI L1/L2

Similar Questions

• Effect of loss of link IOM UCS on CF in Port-channel mode

  Hello

  We recently discovered that when UCS Server Ports are port-channel mode, loss of a member link causes CF traffic disruption in a VMware environment.  Host VMware never sees a path down and his guest enter a time-out period of IO wait.  Once expired the time-out of comments, a SCSI reset restores connectivity of storage.  We responded to several customers and said that this is the expected behavior.  This is of concern to us and how it affects the design decisions.

  Any contribution is appreciated.

  Thank you.

  It is true, that you expect the SCSI timeout, and then the operating system must redo a flogi. Of course, I guess that you have CF multipathing installation and work; Therefore, no disruption to traffic.

  Without port-channel, the vhba on the failing tissue will go down; and the management of multi-channel FC is the only solution.

• Loss of links HTML and Word to PDF conversion

  Hi, when I convert a Web page or a word to PDF document, the links show as blue underlined fonts, but the URL is missing, and so the link is not active. I checked that "add links" is checked in my conversion settings. The same thing happens when I print to Adobe PDF, or when I select the menu "convert to PDF".

  I use Adobe Pro X and Word 2003. My OS is Windows XP.  Any advice would be appreciated.

  Thanks, Paul

  First of all, by using the Adobe PDF printer to create PDF won't get you links.

  Second, try to drag your HTML files directly in Acrobat to see what is happening.  If you aren't yet getting links then I would repair or reinstall Acrobat X

• Lost media links

  I'm composing a long sequence of photos from Photoshop and keep the loss of links. I have to constantly reprinted media, and worse yet, I link the files individually. PP cannot permanently bind those photos? If not, can not just simply point to the folder where these files are located and do them all relinked (in the same way as InDesign?). I lose a huge amount of time and really need an answer.

  Thank you

  Herb

  I guess that your multimedia files are on an external or network drive?

  If they are on a local disk (internal)... it is unlikely that they will break the link.

• Lost links in Premiere Pro CS4

  I copied the files of a project from couple to a hot spare for future use.  Do not use the project manager, because I copied everything about my project within the limits it's folder autonomous own structure.  Because I copied everything "as what ' of the original disc in the back-up, I thought that it would be no loss of links.  All 3 of my project now won't charge, even if I copy them on the original disc.  Note: I have recently change the drive letter for the drive, the project has been initially copied from.  Re-Binder would be a lot of your time at this stage.  Why am I losing links when them have not actually moved?

  If your files are located on the same drive (letter) and with the same exact directory structure, reissue of links is not necessary. However, if the program asks you the X file, reissue of links is easy, just point to the searched file and will automatically find the other files. You may need to repeat for other directories.

• Reinstall after windows crash

  Hi, hope you can help again. 8.1 Windows crashed (conflict between the firewall and anti-virus), only solved by a new installation of 8.1 which resulted in all programs being deleted, nothing new here. Reinstalled to 13 items and now you want to restore the catalog. The photos were on a separate, as the backup hard drive. Do I have to transfer all the photos again? Is there an easier way using the restore? I don't want to replace what I have, what restoration seems to be. I have a full backup and 5 incremental backups, which I first?

  It's a good thing, I'm retired, as it looks like a busy week!

  PS should I upgrade to Windows 10, or it would cause more problems?

  John

  johnhh39 wrote:

  Hi, hope you can help again. 8.1 Windows crashed (conflict between the firewall and anti-virus), only solved by a new installation of 8.1 which resulted in all programs being deleted, nothing new here. Reinstalled to 13 items and now you want to restore the catalog. The photos were on a separate, as the backup hard drive. Do I have to transfer all the photos again? Is there an easier way using the restore? I don't want to replace what I have, what restoration seems to be. I have a full backup and 5 incremental backups, which I first?

  John, I understand that you have all your multimedia files on an external drive and your different backups also on an external drive. It doesn't matter if it is on the same drive external or not.

  You don't say where was the folder in your catalog, in the office or in an external drive.

  Suppose that the catalog was already on an external drive. It should work immediately without any intervention on your part. The only thing to check is that the external drive with the media always has the same drive letter.

  If the catalog folder on the default location on the C: drive (which seems to be the case), he lost.

  But...

  Since you have incremental backups, the last of them contains a catalog.buc in its folder. It's a copy renamed your catalog at the time of this incremental backup. This gives you a quick way to recover most of your organization on that date.

  -Create a folder somewhere (in office or the external drive). Copy the catalog.buc in this new folder. Rename the file to "catalog.pse13db". Start the organizer with a double click on this file. Unfortunately, you may lose your faces or places of marking, but your keywords, captions, categories, notes, albums, batteries and sets version should be there. Remember that move a catalog folder does not change its content, without loss of links.

  If you want to restore from the incremental backup to return everything, always start by the last increment and follow the instructions.

  You can restore to a new location of main folder if you have enough space. It's way more accurate and safe to pick up everything.

  If you choose to restore to the same location, pay attention to the warnings various any crash or skip existing files; In my view, there is a possibility to ignore existing files, but I had the opportunity to test only recently.

• Menu accordion creating a below dead space?

  The version of my office, I have a menu accordion that links off site above a navigation menu that links in the site. After the release, when I overthrow of the navigation menu does not create States I have given is not able to activate. It seems as if the accordion has created a dead space and it is not letting anything under it is accessible. Both are on the master page, and on the same layer. If I pass the arrangement around it again does not what I'm looking for. Any suggestions?

  Flipping the first a few menu items, and then you can see that 'Where to Buy' and 'Hair loss items' links under the area of the accordion play not the same.

  http://responsive-test03.BusinessCatalyst.com/index.html

  Hi Toni,

  Yes, I understand that, and to overcome this problem, please perform the steps mentioned in the attached page - http://prntscr.com/a3pucg

  You must right click on the gray rectangle that is there on the header at the top and then choose layout > Send backward

  It should then bring the accordion of language on top of it.

  Kind regards

  Ankush

• 'dead' path should recover to afer 'alive' state restoration conection b & w esxi and a table?

  Thanks in advance!

  In the case of a loss only link/path (i.e. not a complete system loss), the paths should be instantly recover after being again available (it may take a few seconds until that MISTLETOE is well updated). Who has really necessary switch e.g. updated when the reboots are necessary or replace the switch...

  A few weeks ago, I've migrated a vSphere environment with storage iSCSI for new physical switches, by moving the uplinks to the new switches (one by one), always ensuring that the 'lost' paths were available again before migrating to the next uplink.

  André

• Of packet losses causing ISDN link

  Hi all

  I have a little more trouble with the ISDN link. Everything works perfectly now, I can make calls to 384 k ISDN.

  The problem now is that packet losses arises (not much,<1% total)="" when="" connected="" through="" the="" link="" into="" a="" lan.="" to="" clarify,="" the="" sx20="" needs="" to="" function="" over="" both="" isdn="" and="" ip="" (it's="" replaced="" an="" old="" tandberg="" edge).="" in="" lan="" calls,="" if="" i="" bypass="" the="" link="" completely="" and="" plug="" straight="" into="" the="" wall="" tap,="" the="" packet="" loss="" is="" at="" 0.0%.="" put="" it="" back="" in,="" packet="" loss="" is="" back="" up="" again.="" this="" is="" without="" changing="" any="" settings="" on="" either="">

  Any ideas what could be causing this? I'm just trying to use the ISDN link in which it is never intended?

  You do no way, it was not designed to be is supposed to work this way, allowing you to make IP or ISDN calls.  We have ours up and running in this way and it works well.

  One thing to check would be the network cables that you are using - good markets and bad cables can often cause problems when using a quality cable can solve the problem.

  Check your switch configuration to make sure that you are not forcing a setting the speed/duplex, which then is not being properly negotiated by the equipment then plug (or make sure that force you the settings the entire path if you need to do).

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Loss of Word links with Acrobat XI

  I had Acrobat XI for quite awhile. He has been its automatically give links in Word files during the conversion process. This is no longer. Can anyone provide better understand why this is?

  Acrobat XI is not compatible with Office 2016. Only Acrobat DC is.

  See: applications, Adobe Acrobat PDFMaker and compatible web browsers

• I need to go back to ff4. I know that this has come up before but I don't have a link to the answer. My concern is the loss of use of Roboform.

  I need to go back to FF4. I have done this in the past, but lost the procedure. I need to get to FF4 so Roboform tool bar works.

  http://www.RoboForm.com/support/news

  Version 7.3.2

  • Firefox 5: Add support for Firefox 5.

• By clicking on the e-mail link opens Internet Explorer...

  It is a new show, starting today. I have not changed my default e-mail settings.

  By clicking on the link address on Craigslist, a window opens, giving options. I always choose anonymization. Today, when I clicked it, Internet Explorer opens. When I right click on IE to close the window, he quickly opened many tabs, each one had the message "Navigation cancelled". I have been unable to click "Close all tabs" for more than 30 seconds, date at which had opened more than 50 tablets. It took several attempts to close all tabs.

  Now, until you tell me to check the settings of Internet Explorer, keep in mind that: 1) I NEVER use IE and 2) I've never had this problem in the past and 3) I have not changed any default e-mail settings. In addition, 4) I had no problem to my task on Chrome.

  Something is messed up in Firefox 27.0.1 and I am at a loss as to what it could be or how to fix. None of the pages of online help was of no use, up to this point. I restarted Firefox, and I restarted my computer.

  Any ideas would be welcome

  After receiving this recommendation, I'm away from him. I didn't have time to go through all these steps. It was easier to use but not Firefox when you connect on Craigslist.

  Here we are, two weeks later. I haven't done anything, but the problem is now gone. Apparently Mozilla fixed everything that was the problem, or maybe it was a problem of window that has been resolved with a recent update.

  Whatever happens, the mystery was never solved, but it no longer exists.

• Developers are loss of content warning before a back-up?

  I lost a sex revealing video of ultrasound for our first baby because I restored my new backup iphone6 and have not backed up the content in the new iphone. I feel if a warning appears when performing a backup keeps users on the imminent loss of content, it will go a long way in helping users to avoid loss of the memorable content by accident as part of back ups. The whole reason I bought a new iphone was to capture these moments that are now lost forever.

  I'm sorry for your loss, but it is the responsibility of the user to understand the hardware and software they use. The information you need is readily available.

  On safeguards in iCloud and iTunes - Apple Support

  To send your comments directly to Apple use this link:

  http://www.Apple.com/feedback/

• How can I fix FF who need links clicked twice to load?

  With the help of worms 22.0, Win7 x 64. I have not had any problems until yesterday, where I had a power failure. On reboot, everything in FF loading slow as balls. SpeedTest ran OK, showing no difference in rates of UL/DL, but I have to click it twice to get it to load, sometimes more. Clicking it once a few results in a blank page, nothing appearing during up to one minute. It is yet to expire, no error message. If I click on new or F5, it instantly loads the page.

  I found several links describing the same problem through Google, but none of them were actually resolved before being closed. Safe mode is taken. Disable extensions is also nothing my.
  -In my opinion - something has been corrupted by the power failure sudden, but that's just speculation. There is nothing to be blocked by the firewall and loads of any property in Chrome/IE, but I really do not have to resort to those. Still, everything worked fine before the power loss.

  Idk. Reinstall completely? Is it possible to do the FF to run a control of file check? I threw all the temporary files using CCleaner, but it made no difference.

  No difference

  Edit: redness, brand-new, 19.0 installed without the profile seems to work very well, then he replaced with 22.0, imported bookmarks, and it's all good. Idk why it worked this time, when the steps I took were identical to what I did yesterday (and unfortunately), except using 19.0 complete as the base instead of 23 hub installation. Not working at full capacity once again, no more problems.

• How can I see the full target URL when I hover over a link? Not a short URL.

  How can I see the full target URL when I hover over a link? I don't want to see short URL. Is there a way to customize this?

  Full target URL allowing me to easily see how visitors reached my site via Google, Bing, Yahoo Research, etc. With the short URL I don't see what they entered into the search field.

  You can use this extension to restore the characteristics of loss of status bar and customize settings such as displaying the URL of a link to the overview.

  • Evar-4-status: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/