Lost control of the size of the text

Similar Questions

• Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

  Original title: help

  OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

  Hi MartyFenwick,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the mouse and keyboard?

  3. you receive an error code or message?

  4. is everything works well after running system restore?

  5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

  6. what happens when you try to play music CDs?

  7. what program you use to play the CD?

  Please follow the methods and mark the question below:

  Before you install SP1, follow the method 1 and 2.

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you disable the antivirus for temporarily until the installation of SP 1.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Follow the steps in the link for problems with the keyboard and the mouse below.

   
  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 4:

  Follow the steps in the link below.

  Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I hope that the information above helps you.

• Spooky: Front lost control of the scheme code

  I have a LabVIEW (Win7-64B LabVIEW 14.0 32 bit) program that behaves a little bit scary.

  On some occasions, while the LabVIEW tandis que le LabVIEW programme program is running, suddenly the front panel controls are no longer read by the process of block diagram. So that's what I see:

  • The program runs, processes the data, and updates indicators as expected.
  • The run button is in unmanaged mode even if the program continues to run.
  • The button abandon red is not functional - push has no effect.
  • The block diagram can be debugged, simple staircase and breakpoints.
  • The controls on the front panel are not read and the program cannot be stopped because it is based on the action of the Panel before doing so.
  • The run button is non-functional in the sense that it can be pressed in run mode, but he has no apparent effect on the State of the block already running diagram.
  • The only way to stop the program is closing the front panel.
  • The behavior occurs at random times, is annoyingly frequent, but not enough (frequent) to make debugging by elimination of effective code.

  The program is a construction of State machine using queued messages and access material cRIO via shared variables.

  I know that this information is rather rare in which case debugging suggestions, but in which direction to look for all ideas are welcome.

  Some of these could possibly be explained by things like the user interface is locked by a structure of the event or updates to defer property is set on the Panel or being stuck in a call from the DLL, but there is another option that seems to match your description a little: https://lavag.org/topic/17049-windows-aero-theme-and-lockup/?p=104728

  When I saw him it was in an EXE file, so I can't comment on things like execution of arrows, but it was definitely a case where the VI was certainly running and updating the user interface, but was not receiving updates of the user interface.

• I lost control of the iPad from my dad

  I expect after the iPad to my old man 2. (So I know how to work, I have a second iPad, the same model, so I can be sure that I understand what my father asks, when there hard work.) Recently he told me that he has problems with it, so I asked her what she did and then tried the same actions on my iPad - no problems seen :-)

  However when I saw him then, I tried logging on my Apple ID and to my astonishment, all text fields, I tried started to fill up, without me touching the keyboard. I took it home and now whenever I turn it on it and try to use it, I see a mad dash through the menus and controls - all this without me touching a thing! This is all very worrying - anyone have an explanation?

  Is it possible that some kind of accessibility feature has been activated?

  http://www.Apple.com/accessibility/iOS/

  Use the accessibility features in iOS - Apple Support

• I have reset firefox and lost control of the sound icon

  Using a laptop hp compaq. A get the slow start, so reset firefox. After reset, have more control icon in the bottom right of the screen. Other icons are still there. (State of the battery, windows sidebar, etc.) Have no sound.

  Hello

  Please follow what to do if Firefox won't play all the sounds section to solve your problem.

  Thank you

• Help, DG filtering using the combobox controls and the text box

  I have a DG populated an arrayCollection collection. I have a text input where I can type in my search criteria to filter the DG. I also have a combo box that contains a list of all the columns in my DG, so I can determine what column to apply the filter.
  
  I was able to make a filter text on a DG in the past, if I use a static data in my arraycollection collection name, but this time I want it to be dynamic using the drop-down list box.
  Here is an example of my configuration:
  DG contains columns A, B, C, D and E. The drop-down list box contains the choices A, B, C, D and E - including the label and the value of the data are the same in this case. If I select choices from the drop-down list box and start typing in my text entry, the DG should start to filter according to my entry that is contrary to the values of column D.
  
  Here's my code work for static column D filtering:
  private function filterColumn (): void {}
  sFilter = TextFilter.text;
  myAC.filterFunction = doFilter;
  myAC.refresh ();
  }
  private void doFilter(obj:Object):Boolean {}
  var result: Boolean = false;
  If (! obj.) D.Length | obj. D.toUpperCase () .indexOf (sFilter.toUpperCase ()) > = 0) {}
  result = true;
  }
  return the result;
  }
  
  This code will allow me to type in text and it will only filter the D column. The value of the combo box has no importance at this stage.
  
  I need the code to make what use the value combobox.selectedItem.data instead of D. However when I try this, he told me - TypeError: Error #1123: filter operator is not compatible with the Object type
  
  Using most of the above code, I just changed the IF statement to:
  If (! obj.) (cbx.selectedItem.data) .length | obj. ((cbx.selectedItem.data) .toUpperCase () .indexOf (sFilter.toUpperCase ()) > = 0)
  And which generates the above error.
  
  Can someone help me find a way to replace by a static column for the dynamic combobox value value? Any help is appreciated.

  I thought about it.

  If (! obj [cbx.selectedItem.data] .length: obj [cbx.selectedItem.data] .toUpperCase () .indexOf (sFilter.toUpperCase ()) > = 0)

  For anyone who wants to try it.

• How to change or remove the text automatically added to a provision DITA?

  I am to evaluate FM11 with an eye toward using it to create our manual print (as well as all the stuff of re-use that will allow DITA). I have some experience with DITA authoring in other applications, but FM is new to me.

  It's going to be me and a colleague to show how FM is an improvement on our current manual process (InDesign). In particular, one thing that we need to demonstrate is how we will retain complete control over page layout features (something that we do not easily get in our other XML authoring tool).

  I played with the 'new' model DITA of task/reference/concept because they open, and I am disturbed to see that the text appears automatically in some places and I can't change it or delete it. For example, a < info > tag adds the text 'ADDITIONAL INFORMATION'. We couldn't have this text to appear in our page layouts, or we might want to change it. At the very least, I will need to prove that I have control over the text like this.

  I looked through the Pages of reference, EDDs, DTD, INIs and several other places, and I can't nail down the source of the (unwanted) text. Can someone point me in the right direction?

  Hi ohnehosen...

  These strings are defined in ESD, AutoNumber text in the style of paragraph or on the pages of reference. Looks like you have checked all these places, but they * are * it. One of the problems you can run in FM11 are that you probably use DITA 1.2, and for DITA 1.2 there is a request for separate for each type of topic structure. This means that you will have different EDDs and models to go. If you change a DSP, you will need to import into the corresponding model.

  I strongly suggest that, instead of changing the structure applications by default, you clone first defaults to the names of your choice. Then, you change your custom applications and leave the default apps unmodified for the test. You * will * break the apps at some point (everyone does) and without the default applications unmodified for the test.

  If you do not need the DITA 1.2 model, you can consider using the DITA 1.1 apps, which (I think) are just an app for all types of topics.

  OR... If you want a much more simple and reliable option for PDF of DITA editing, you might see DITA-FMx. This is a product I sell, but it provides enhanced DITA creation and publication tools in FrameMaker.

  http://leximation.com/DITA-FMX/

  See you soon,.

  .. .Scott

  Scott Prentice

  Leximation, Inc..

  www.leximation.com

• Size of the text cursor (insertion point)?

  How can I control the size of the text cursor (insertion point)? The Windows setting in Accessability Options of the Panel seems to ignore Firefox.

  Try to create these two integer prefs:

  ui.caretWidth
  ui.caretBlinkTime (milliseconds;use 0 to disable blink)
  

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)

• How to increase the text size in gmail e-mails

  I had good size text but pressed some keys on the keyboard accidentally and now everything is much smaller. How to fix this?

  See http://kb.mozillazine.org/Zoom_text_of_web_pages

  To change the size of the text of web pages, do one of the following

  • Firefox 3 and above: view-> Zoom-> Zoom in / Zoom out / reset / Zoom text only
    • CTRL + 0 (hold down the control key, then press zero) resets to normal size (RESET the Zoom) zoom.
    • CTRL ++ (hold down the CTRL key and press the key more) makes the text bigger (Zoom IN).
    • Ctrl + - (hold down the control key, then press the key less) makes the text smaller. (Zoom OUT)
    • Ctrl + scroll with the mouse wheel

  These changes will not change that temporarily the sizes of text. Tools-> Options -> content-> fonts & colors offer options that will stay.

  Your update of Firefox is originally even on Firefox 3

• 2 questions - run as administriator &amp; change in the size of the text

  Hi all!

  I've developed software with CVI, could you please answer 2 questions?

  1. when I install on other computers, the text messages different looks (the police expanded) and in my computer, it seems. I think that happens when you choose to change the text size in windows thorugh: Panel-> apperance and customizations-> medium(125%)/large(150%) instead of hail (default 100%). Prevent the change in the size of the text in the panels?

  2. on other computers the software could not create a file for writing, unless a throw with the option "Run as administriator". Why?

  I hope you understood my questions, thank you!

  Depending on the size of the text is concerned, if you do not use one of the metafonts predefined for your labels and the text of the control, you shouldn't have this problem. The metafonts are designed to take on the characteristics (in size and style), the default settings of the computer where you run your program. Furthermore, by default, all new controls that you create using one of these metafonts, specifically NIDialogMetaFont, which is an alias for a variable size font which can become more or less important depending on the settings of the computer.

  To avoid this, you can change melting completely to something else (Arial, etc.), or you can even keep the same font, but make sure that you choose a different size that will result by it is not not the metafont predefined. For example, in my computer, if I use the point size 11, I use the metafont. But if I change the size of point to something else, then I don't want to, and that its size in points then remains the same in any computer.

  Size 11 (metafont):

  

  Size 12 (no metafont):

  

• Why is the size of the text in my bars, menus and small office?

  This morning when I turned on my computer, the size of my text was tiny! When I say this, I don't want the text in internet explorer, because it's normal size, but I mean the text on the inside the tabs, the text on the bar Favorites and the other eveyr menu, the text of the name in the actual window and in my address bar. In addition, the text on my desktop (the words under the desktop icons) is tiny as well. Even the words on my Start menu are tiny.

  It's weird because everything in my browser and other programs are normal size. I tried to adjust the resolution and goes to personalization > display > and change the dpi and will just 'small', 'medium', but which explodes everything on my screen. I fear, I may have some sort of virus or something that is causing... Anyone know the cause of this?

  (PS. When I say that, I'm not talking SMS language in the browser, i.e. controlling and a magnification of DO NOT solve my problem)

  I think this may be the case. But anyway, I tried to use a restore of the system for a week back and fortunately it worked. All my fonts are back to normal size, but I still don't know exactly what the problem was. But I'm just glad it's resolved. Thanks Gerry!

• Need help on why the text size continues to change as I'm typing or research. Need help on why the page disappears when I try to send email or when I try to view a page online.

  Can someone tell me how to fix these issues?  When I type a message by e-mail or through a Web site, I get the microscope & then the text size change automatically if small I can't read.  The other problem I have is that I continue to in getting kicked off the e-mail page or Web page without hitting any other buttons.  When I type an email, and more text size change, I get a message box asking me if I want to leave the page, click ok or if I want to stay on the page, click Cancel.  I always click Cancel, but get kicked off the e-mail page anyway and have to start over.  This happened to someone?   I asked Acer (my brand of windows 7 computer) for help, but they say the warranty that I treat these & have to pay.  I asked Microsoft to help on this, but I have to pay.  I got this Acer Aspire 7540 for about a month.  Cannot get help anywhere.  Anyone know what to do or where I can ask for help?

  Hi Phylomel,

  -Since when are you facing this problem?

  -Do you have yo umake any changes made to your computer before this problem started?

  -This only happens when you access email through Internet Explorer?

  -This happens on all the websites or any websites?

  However, you can try to optimize the settings of Internet Explorer on your computer and check if that helps you solve the problem. Access the link below and follow the steps to optimize Internet explorer.

  http://support.Microsoft.com/kb/936213

  Also, you can check if the CTRL key on the keyboard is sturck and if the program is based on shortcut keys.

  You try to use the on-screen keyboard and check if the problem persists.

  Steps to start the on-screen keyboard on:

  1. click on start.

  2. open the control panel (Classic view).

  3. click on ease of access Center.

  4. click on on-screen keyboard

  You can also try starting an online virus scan to check if your computer is infected and remove infected items and check if it helps you to solve the problem. Go to the link below to run an online virus scan.

  http://safety.live.com

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I increase the size of the text in applications without changing the size of the desktop icons?

  I have my desktop icons attached to the size I want, but when I open applications as e-mail text is tiny.  How can I change the size of the text by default without changing the size of the icons?

  Hold down the ctrl key and the mouse wheel. This should change the font size in some applications. Some applications also have their own settings of police out of their menus in things like or etc (for example). This will vary by app.

  For WLMail it appears this and this should offer some control on WLMail fonts used, but only the 2nd seems to work OK. This application there is a bug? and certainly it does not work for me.

• Font size of Smartphones from blackBerry in the text of the Message

  I have a BlackBerry Curve 9360. I found how to change the size of the font on my phone but I can't find how to change the size fond of the text of the message in any of my emails. Is it possible to do this operation?

  It depends entirely on the email. Are these emails, HTML or text emails gross? Text editor enriched someone sending Outlook allows you to create emails or MS Word. Still, you can't control the font size in the body of an email.

• "Change only the size of the text" greyed out

  I want to change the size of the text only in windows 8. When I go to control panel/display option 'Change only the size of the text' dialog boxes are grayed out.  Can someone tell me how to solve this problem?

  Hello

  You can see this thread dealing with the same type of problem:

  Change the size of the text only does not work

  Note:

  After my research I find that if we choose smaller screen, which is the default (100%) under change the size of all the elements , then the options for "Change only the size of the text" is not grayed out, if we select medium or large, then the option is grayed out.

  Check if you are using the smaller screen under change the size of all the items and then try to change the "Only change the size of the text".

  You may also refer to this article to check if it helps:

  Make the text on the screen larger or smaller

  Please let us know if you have any concerns about Windows.