lost gold status

Similar Questions

• Printer HP Photosmart all-in-one, the box of Windows 7 lost my status of the printer at the bottom on the right

  Lost the small box at the bottom right which shows when printing to the printer.  When I send a job to the printer, it prints OK, but recently after some other printer problems (need new ink cartridge), the small boxdoes not displayed.  Because the printer is in another room, it's a good feature to have the work.

  Any suggestions?

  Hello

  Please try:

  Click Start > devices and printers.
  Click Print Server properties (in the box "toolbar" above the list of devices).
  Click the Advanced tab.
  In a local printing: check "Show notifications of information for local printers.

  Kind regards.

• Lost hardware status tab

  Hello

  Since yesterday my 'material' status - tab in Virtual Center has disappeared. I ve had problems yesterday (switch down) network, this might be a reason so?

  How can I make it visible again.

  Thank you

  Have you tried to restart vCenter WebServices? and if that does the trick, try restarting the vCenter Server service.

  If this post was useful/solved your problem, please mark the points of wire and price as seem you. Thank you!

• How to recover the status bar

  original title: I lost my status bar, how do I get that back

  He lost when I added security

  Hi, Thomas,.

  Right-click next to the new tab, and then select the status bar

• Cannot connect on iMac OS 10.4

  My 93 year old father has not been able to connect on his iMac running OS 10.4 for 3 days. I entered password Apple, e-mail password, and each password he used this last year. Nothing worked including his secret Question. Any advice on how I can help to connect to his computer.

  Topic: kmosx5: I lost my admin user (Mac OS X 10.4 and earlier)- http://discussions.apple.com/thread/121786

  Reset the OS X Password without an OS X CD - http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

  rccharles post on the change of password with the single user mode - http://discussions.apple.com/thread/2747898

  Lost admin status back on OS X - http://www.salingfamily.net/trav/osx/regain_admin.html

  Running OS X Setup Wizard (another topic) - http://discussions.apple.com/message/9581230#9581230

  You can create a separate administrator for yourself account to act as a backdoor, if this occurs again or should he forget his password.  It is very easy to reset passwords when you are an administrator. account.

• BlackBerry Z10 Z10 is not running... More details about the post

  Watch list prior to the incident:

  -my phone needs to be rebooted now and then because the phone has no reception Internet... all I get is this small h but when I restart it, it goes back to the 3G...

  -During the loading of my phone, if I acsidentaly loosen the usb microphone connected to my phone. my phone is just dies without warning, as it comes to fade and other things... I only wait a few minutes for her to turn its own

  -my phone started to disable its own (not during loading) only at random even the phone is idle I'll just fint it restarts on its own... and while I use the phone it just restarts...

  -my phone started having a flashing model for the Red led lights up when he died... the rate is 4 seconds blinks... the phone would turn not...

  -my phone turned on automatically... I noticed that the battery is only 20 percent when he died it was more than 50%

  -When I tied my phone it just turned off on its own...

  -the phone is now have a constant lit red light led... the phone will not turn on

  -i out the battery... Remove SIM... remove the sd card and pop while... no joy

  -After removing the bss (battery, sim card and sd card), the phone has lost its constant red led clear status and is now dead

  Observations after incident

  -i tried removing the battery and popping in... no joy...

  left-i it doesn't charge for at least 7 hours... no joy

  -i left without the battery for 4 hours... no joy

  -the phone connected to my pc for 4 hours left... the red light continues returned...

  -i tried to reload the OS purchase my computer does not detect my phone so... no joy...

  d ' irritation if took out the battery and sent... the phone has lost its status as a continuous red light...

  Note * it was in an interval of 3 days

  I would really appreciate the help, the location of the place where I can get it replaced is not easily accessible... I would like to replace as a last resort because I have important data on my blackberry z10.

  If you are willing to help and need more details please do inform me.

  Hello everyone I would like to thank the person who tried to help me, but here I am with the best solution to get your z10 to run...

  1 collect information of the nearest BlackBerry Expert Center close to you. here a link that will help you find one.

  http://global.BlackBerry.com/en/support/support-store-locations.html

  2 contact, then tell them the details of the incident, symptoms, etc...

  3, they will say to bring the product to them because they need to change the sone (OS) software and material things... they also explain how the service works... the device will be in 6 weeks max.

  4. wait...

  I hope to help the people who are currently with these problems, Z10 is a great device. He has an amazing interface as all the blackberry is... also amazing on the keyboard of the screen very responsive... sad to say, it doesn't have a lot of applications, but that doesn't bother since I'm not really a person app... CIAO well! Ganna let this thing like solved but we look forward to answer you if you guys need something said...

• Enforce a stainless watch with only possible through DGMGRL?

  Hello

  I would like to know if there is a way to make a read-only watch while it is still the application

  newspapers shipped from its primary.

  Through sqlplus, it is done easily with:

  SQL > select open_mode from v database $;

  OPEN_MODE

  --------------------

  MOUNTED

  SQL > alter database recover managed standby database cancel;

  Database altered.

  SQL > alter database open;

  Database altered.

  SQL > alter recover managed standby database disconnect log file using current;

  Database altered.

  SQL > select open_mode from v database $;

  OPEN_MODE

  --------------------

  READ ONLY TO APPLY

  but all the examples I found online show back and forth between dgmgrl and sqlplus, sort of:

  DGMGRL > alter database 'GOLD' status = "APPLY-OFF."

  SQL > alter database open read-only.

  DGMGRL > alter database 'GOLD' status = "apply."

  (sometimes also with the extra [and useless?]):

  DGMGRL > change the "GOLD" status = 'ONLINE' ;) database

  = > 1 / is there a way to go in alone dgmgrl utility?

  2 / what is the significance of the OPEN READ ONLY specification rather than OPEN alone? Does make sense?

  Thank you.

  Kind regards

  SEB

  Good fishing;

  You are right. So I think its this (untested)

  STATE of CHANGE database 'OR' SET is 'READ ONLY' WITH INSTANCE APPLY =;.

  But you may need Active Data Guard for it.

  More information

  Bug 7633734: DG ADMIN PAGE TIME REAL QUERY DISPLAYS OFF WHEN ACTIVE FOR 11.2 DATABASES

  Best regards

  mseberg

• Several conditions

  I have a table with the status job such as opening or closing, if I pass the open value, only records with the open status will be filtered, similarly when I choose will be filtered and narrow only to job_status with closing records, I can do this by passing the opening or closing as parameters, but when I'm not all values then all the records in ot_job_stat should be displayed, but when I add more than one condition in the query above, its doesn't give me good results. As I added the column date to the table and I want to filter the data according to several ranges as within the time span what job_types I want, but the query is giving incorrect results.
  
  {code}

  CREATE TABLE OT_JOB_STAT (JOB_NO VARCHAR2 (12), JOB_STATUS VARCHAR2 (12), JOB_EQUIP VARCHAR2 (12), JOB_TYPE VARCHAR2 (12), JOB_DATE DATE);

  insert into ot_job_stat (JOB_NO, JOB_STATUS, JOB_EQUIP, JOB_TYPE, JOB_DATE) values ('0001 ', 'Open', 'CNC1', 'Prev', TO_DATE('01/01/2014'));

  insert into ot_job_stat (JOB_NO, JOB_STATUS, JOB_EQUIP, JOB_TYPE, JOB_DATE) values ('0002 ', 'Closed', 'CNC1', 'Brk', TO_DATE('01/01/2014'));

  insert into ot_job_stat (JOB_NO, JOB_STATUS, JOB_EQUIP, JOB_TYPE, JOB_DATE) values ('0003 ', 'Closed', 'CNC2', 'Prev', TO_DATE('02/02/2014'));

  Select * from ot_job_stat

  WHERE

  JOB_DATE between TO_DATE(:F_JOB_DT,'DD/MM/RRRR') AND TO_DATE(:T_JOB_DT,'DD/MM/RRRR')

  and job_type in: job_type or: job_type is null

  "- I'm passing job_type as null and: F_JOB_DT = 1 January 2014 ' AND: T_JOB_DT = 1 January 2014"

  -its getting all three records, but in fact I don't want the recording of 02/02/2014.

  -Result

  JOB_NO JOB_STATUS JOB_EQUIP JOB_DATE JOB_TYPE

  0002 close CNC1 Brk 01/01/2014

  0003 close CNC2 Prev 02/02/2014

  0001 open CNC1 Prev 01/01/2014

  {/ code}

  You mean this?

  SELECT * FROM OT_JOB_STAT

  WHERE (UPPER (JOB_STATUS) =: STATUS)

  (GOLD (: STATUS IS NULL AND 1 = 1))

  AND JOB_DATE between TO_DATE(:F_JOB_DT,'DD/MM/RRRR') AND TO_DATE(:T_JOB_DT,'DD/MM/RRRR');

• Parameters of the assistance service Console, need to change the console

  Hello

  While attempting to rework is nic mappings for port includes all my NIC where put in a vSwitch and I lost the status of the connection to the esx server. How you edit the network settings on the console to change the network settings.

  After the link I have given, you should be able to correctly move things.  You will however need to be standing in front of the console or have some sort of connection available as remote ILO or DRAC console.

  When you are finished, you must restart pass

  service mgmt-vmware restart

• Lists does not properly

  Hello
  Tihis happens to me quite often when I put more than 1 or 2 filters for the list.
  
  I am trying to create a list of prospects where the country is not equal to 4 countries, the situation is not converted, and the seller is not equal to a certain person - I put the following:
  
  Country is not equal to A
  Country gold is not equal to B
  Country gold is not equal to C
  Country gold is not equal to D
  Country gold is not equal to E
  Seller of GOLD is not equal to the NAME
  GOLD status is not equal to convert.
  
  All my sons, however, appear when I run the list.
  
  That I am I hurt and why is it not working?

  Hello

  Please do not use OR operator use the AND operator instead. Please use the following condition

  Country is not equal to A
  AND the country is not equal to B
  AND the country is not equal to C
  AND the country is not equal to D
  AND the seller is not equal to the NAME
  AND the situation is not equal to convert.

  Let me know if it works

  Thank you & best regards
  Sablok

• Table of contents issue

  Hello all - I'm new to the forums and relatively new to the framework, but I was an author of technology for 10 years.

  I added a chapter of a book, and it will not be displayed in my table of contents.  I have not configured the original TOC, so I don't know why he sees the other chapters (I'm still learning).

  I played with a few things, but can't make it work.  I don't want to put in place of the paradigms that could limit the creativity of your answers, so I'll wait before I explain what I tried.

  Any suggestions?

  I imported the former chapter the new formats.  I'm assuming that this will ensure that the paragraph format names are the same.  What is a good hypothesis?

  Fix.

  ... There is no option in virtue to change it to set up the Table of contents.

  Ah. This suggests that the TOC file is not a 'real' TOC file (generated).

  It can be implemented by generating a table of contents, and then by copying and pasting in an ordinary chapter file. Or, it may have been created by artisan xrefs. Or it may have been a file generated at the same time, but lost this status due to a moving/renaming operation inelegant. These scenarios suggest that the author didn't know how to build and maintain an automagic OCD, or they had some unique formatting or content problem that prevented the use of a table of contents generated.

  You may need to perform a backup of this file, delete it from the book, make a Add > Table of contents to generate a new and import failure TOC file formats.

  But not yet. Wait for a few other remote other contributors here crystal ball readings.

  And is there something weird about this OCD, as text drags inputs that can be lost if generated automatically?

• Product key lost for Age of Empires Gold Edition

  Original title: lost product key!

  I lost my product key for Age of Empires Gold Edition (original game). Contact information only I can find are American. I'm in Australia. How can I get a new product key? Thank you.

  Hi Joshlaila,

  I suggest to read the following article and check if it helps.

  How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint

  http://support.Microsoft.com/kb/973457

  Contact Microsoft

  http://support.Microsoft.com/contactus/?LN=EN-AU#TAB0

  http://support.Microsoft.com/?LN=EN-AU

• Buy Age Of Mythology Gold Edition: lost age of Mytholgy CD1

  I bought Age Of Mytholgy Gold Edition, but I've lost Age Of Mytholgy CD1 and now the whole pack is useless! Please answer what to do. If you want proof of purchase, please send an e-mail to:

  Hello

  Welcome to the Microsoft Answers community.

  It is very unfortunate to know that you have lost the game disc. You can try to contact the Microsoft Supplemental Parts team for a replacement CD. To locate the phone number, visit the following Microsoft Web site:

  http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS

  How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals

  http://support.Microsoft.com/kb/326246

  Replacements for Microsoft software or equipment damaged, defective, or lost

  To request the replacement of hardware or software, contact the Microsoft Supplemental Parts team at the appropriate number provided in the section "contact information". You must be in possession of the product (if it is damaged or defective) and be able to provide proof of purchase. Service representative customer will notify you of any costs of replacement or shipping and handling fees that may be charged. If a product is no longer under warranty, the replacement item may no longer be available.

  Contact information

  In the United States and the Canada, you can reach the Microsoft Supplemental Parts team at the contact numbers listed here:

  United States: (800) 360-7561, from Monday to Friday from 05:00 to 19:00 Pacific time.

  Canada: (800) 933-4750, from Monday to Friday from 05:00 to 19:00 Pacific time.

  TTY customers: Contact Microsoft at (800) 718-1599, from Monday to Friday from 05:00 to 19:00 Pacific time.

  International replacement requests

  International replacement requests should be directed to the appropriate local subsidiary. For more information, visit the following Web site: http://support.microsoft.com/common/international.aspx

  Let us know if this helps

  Concerning
  Anthony.

• Error message on my Vista computer: missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost).

  Missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost). How can I recover my system, if possible? It does not even start.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  The Startup Repair tool can repair atapt.sys.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (click on the F8 key during startup and go into safe mode with network - or using the prompt from the disk, if necessary, several times).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator (skip thiis step if you use the disk)...

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  In a best-case scenario, he'll fix Atapi.sys.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / event viewer - type eventvwr and enter, if do it from the command prompt).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  I hope this helps.  Post back the results of the analysis and attempts to repair if these do not work.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• I lost this part of the status bar that holds 1. address of site 2. Home icon of Firefox 3. Google search box area

  I asked a question before you lose the site address space when you open a new tab. I saw the status bar information and showed that an entire line missing the high it is to say that immediately after the bookmarks and holding the 3 in my question.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

  • Open the Customize via "view > toolbars > customize.
  • Make sure the "Bookmarks Toolbar items" are on the personal bar
  • If the "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the toolbar palette in the window the bookmarks toolbar Customize
  • If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar
  • If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar set up
  • http://KB.mozillazine.org/Toolbar_customization
  • https://support.Mozilla.com/kb/back+and+forward+or+other+toolbar+items+are+missing