Lost printer Iner Shadow?

Similar Questions

• Problem printer leaving shadows of printing on printed paper

  Why is my HP laserjet printer leaving shadows printed paper?

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers.
  Check with HP Support, their drivers and documentation online and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• OfficeJet 4635: assistant lost printer

  I lost my printer app Wizard and the icon when I upgraded to a new driver.  I followed other threads and deleted the software and reinstalled by instructions and not good.  I tried using the disk and go good.  The printer is connected wirelesslyand worked before the upgrade. It prints well and fine analysis of thre printer.  Please help me get back the printer assistantg.

  I finally he stares at me.  I uninstalled all the HP software again.  Then, I went into REGEDIT and deleted any reference to HP.  Then I ran a registry fix program (SYSTEM Mech. 15).  Turned the printer off, shut down the computer.  Restarted the computer and turned off my auditor of Virus (VIPRE).  The latest version of the full software from HP, printer, ranConnect new printer (wireless).  Finally, I went to the display DEVICES and PRINTERS and installed the NETWORK PRINTER.  The system has requested that I come home from the installation disc, so I did and ran the installer.  When it's over, I got a new selection in the minimal software that had been installed called ASSISTANT PRINTER.  I chose and SHAZAMM!  I have my printer wizard back.  WOW!

  Thank you RnRMusicMan for your reply, which came after I did the steps above.  I'm glad I don't have to clean boot and open a new user account.  Cleaning the registry by hand was a chore, but I think it's what brought me back in the game.  Thanks again.

  Hope this helps some of the others with this problem.

• HP Officejet Pro 8600: Lost printer installation CD... Help!

  I'm at my wits end... In a nutshell, here's the deal... For some reason, my printer stopped printing.  Lost my installation CD, so I went online and I tried everything.  That's what I've done so far...

  -Uninstalled everything that has to do with my printer.

  -Deletion of printer on the control panel.

  -I went to the HP site and followed everything on the installation and identification new printer and printer software.

  -I'm only connected with a USB key since I have no group network / wireless.

  Any advice?  Thank you.

  Hello

  Thank you for using the HP forum. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• Lost printer AIO 966 installation disc. How can I get the drivers?

  I have lost the disc with drivers for the 966 printer. Where and how can I get the drivers and software?

  JERRYWARRINER,

  You can click on the link to download the Dell AIO 966 printer.

  Dell AIO 966 drivers and downloads

• Install my Dell 924 - lost printer driver disk

  Hello:

  I have a Dell 924 printer and I have lost the driver disk. I'm not sure that the disc would be of no help anyway because I
  updated my windows for Windows 7 64-bit. How can I go about installing updated drivers that are compatible with Windows 7 64 bit? I appreciate all help.  My computer is a Dell Inspiron 546MT desktop computer

  Lobo

  Lobo,

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Dell 924 Photo-All - In - One Printer owners thread (W7)

  Don't forget anti-virus programs and firewaqlls will block communications.

  Rick

• Task of printing with shadow color

  Hi - I'm working on a project in Indesign that will be printed with a Pantone color and black spot.  I use ID CC 2014.  I did this same project year without problem.  However, this year the printer is saying that the shadows are displayed as boxes around elements, they are applied to the - text and photos.  She said she had another customer with the same question.  Is there a bug in Indesign 2014?  Does anyone else have this problem?  Apart from remove every shadow, everyone has

  ideas of how solve this or any work arounds?  Here is a screenshot of what she sees when she prints it.  I export from Indesign as an impression of high quality - compatibility: Acrobat 4, Standard: No.

  

  Thanks in advance for the help,

  Denise

  "" Ideally, you want to leave living, of transparency which is to use an export with Acrobat 5 or greater compatibility, but see also InDesignSecrets "Blog Archive" eliminating the white box effect

• Printer not shadow printing and printing backgrounds transparent .png

  I recently did a book for my college project which I had help with before here, some problems of the printing machine was having with my work, it's that:

  1. on this poster, the shadow has no print from the PDF, it's as if it were zero that does not exist.

  

  2. on the pages of this book where I imported the .png (high resolution) files from Photoshop, the printer has been printing the darkest transparent parts. (I edited the image to show what happens after printing, the darkest area is the transparent part of the .png)

  

  I've read about flattening of transparency, but I'm a bit confused about its operation.

  Could someone help me please?

  
  Thank you, Andrew.

  First thing would be to ask them for a "Preset" they want you to use.

  Next would be to convert the .png .psd files and see if they work better. I never went to print with .png, and even though I think it should work, it's really a web format.

• DesignJet 200 C3180A: Lost printer driver-DesignJet 200

  I seem to have lost the driver for my DesignJet 200 C3180A antique during the upgrade of Windows 10. It worked two months ago (on Windows 7), and the only change I made to the computer - I think - is the upgrade. Now when I go on the list of printers it just isn't there. I tried to search the Internet but nothing seems available after Vista. I'm at a loss as to how I had it works on Win 7 now! Any ideas where a Windows 10 driver is not found?

  I connected via a parallel adapter / USB and the port was virtual USB001 (or was it 002?) and he has worked in the past connected like that.

  Any help would be appreciated, thanks.

  Hello

  Try this other driver for the DJ 430

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=11203514 & swLangOid = 8 & swEnvOid = 2100

  Hope to work

• Help printer mysterious shadow! 7520 vs 7525

  I bought an all in one single 7525 printer at COSTCO and yet there is not here of supporting documentation.  Whenever I come home 7525, all results are for the 7520.  I tried to compare the card and can not see the differences.  Can I have a ghost model? Is there a difference?  Drivers and other downloads can be identical to 7520?  7525 just to COSTCO is really a 7520?  The numbering scheme is chaotic at best.  I really appreciate all the help - is the 7525 basically a 7520?   aaahhhhhhh... Thank you

  I just talked to HP sales on this issue. They are identical printers with the exception of the number. 7520 is distributed by HP distributors; 7525 is distributed through commercial dealers.

• Lost printer by default, every morning

  I lose my printer by default, every morning. Other workstations in our network have also the same problem. Mine is a local printer (USB) and others are network printers. Very annoying! Usually there was an update from one day to the next. Other times, it is! Systems are left running overnight. (Maybe 5% of the time, the default printer remains as default value).

  Hi Sandy Craig,

  Welcome to Microsoft answers forums!

  If you want a default printer is not enabled, windows by default to the first it finds after logon.

  Make sure that the printer is not turned off before starting the computer.

  I suggest you try the following steps:

  
  Step 1: install the latest windows updates

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.

  2. in the left pane, click Find updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Step 2: Try to reset the printer spooler

  Run the Fixit provided in the link below

  http://support.Microsoft.com/kb/2000007

  () This article allows to solve printing problems, you can still run the fixit provided in the link to reset the printer spooler)

   

  Hope this information is helpful

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lost printer after you download Adobe Reader 9.3?

  I have a PC with Windows XP and have Adobe Creative Suite Premium (bought in 2003 - numbers) which came with Acrobat 6. I have been using Reader 7 for a long time and not was not able to read a PDF Online, so I upgraded to Adobe Reader 9.3. When I made this Reader 9.3 erased my PDF printer. So, how to retrieve it? Do I need to uninstall Adobe CS and reinstall?

  Does not support Adobe Reader and Acrobat on the same Windows System. You will need to uninstall Acrobat and Reader and reinstall Acrobat.

• Drop shadow quality in print

  I often use the drop shadow in Adobe Illustrator effect or move the file HAVE in InDesign or export the file to PDF. The problem is that when the PDF or InDesign file is printed the shadow does not retain the same look of loss on the outer edge of the shadow. The image below shows a scan of a recent design, I created. The left image is printing and the right image is the file placed as a smart object in Photoshop. You can see that on the edge of the shadow to the impression that there is a significant advantage, especially on the white part of the background. In the smart object, the shadow falls correctly.

  

  What I found is that if I take the file in Photoshop first, flatten the file and save it as a PSD, then out of the shadows is not the same problem. The printed piece still looks as it should be by using this process.

  Although it works very well for the working RGB or CMYK, I have a file which must use spot colors in color so I can't align to flatten without converting them to an object in grayscale, then to a Duotone in Photoshop, but I really don't like how the design appears like a Duotone. I need to keep the file as a file HAVE so it retains the tones, but I need to know if there is a way to keep the edge of the shadows to be visible when the file is printed.

  You should not pass through hoops as you are to get what you want.  Your screenshots reveal a big problem in the period of INQUIRY where the same shadow will not look the same.  The printed version looks like it (the shadow) has been converted to 1-bit.  I see that you have selected "Transparent background" in the Raster setting.  In your dialog box print of Illustrator, (try the white background in option) which is the resolution of the document set on?  If you have the resolution of 300ppi Raster, your document must be set to about 5080 DPI.  Save the Illustrator (copy) file as .eps Spot Color.  I see no need to create an intense Black shadows.  All this might be connected to the output device.  'Fusion' and how do you use on the shadow if necessary?  Black must print too red.

• HP COLOR LASERJET CP 1215 printer

  When I print on my printer, the shadow (very clear) text or image Printed will appear later (downstairs you original text) so the text appears double.

  I use the cleaning of the my printer HP software tool, but the problem persists.

  Comment do I do to solve this problem.

  Thanks in advance

  Please repost of language French, forum hardware and drivers.
  You should also contact the HP printer help manufacturer.
  Google for support in your country.

  Please language of promotion to rebroadcast, french hardware and drivers forum.

  http://answers.Microsoft.com/fr-FR/Windows/Forum/windows_vista-Hardware?tab=unanswered

  You should also contact the HP printer manufacturer for assistance.
  Google pour support in your country

• Print Page of cleaning HP Color Laser Jet CP1215 problem

  I have a HP Color Laser Jet CP1215 connected to a Windows7 64 bit operating system. The printer prints the shadows cast on the left and right of the paper edges, but also the light shadows in the printing.  I saw the HP Toolbox for my printer and tried to print a cleaning page.  All I get is a text box indicating that the printer could not be accessed, even if it will calibrate and print a test page. I need different drivers or is there another solution?

  Hi eitooc,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you found shadows on the page when printing.

  I'll be happy to help you.

  The driver may be corrupted not allowing all the features work.

  There could be a problem with the toner or the fuser unit causing this problem.

  Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer. Try running Cleanup again.

  Here is a document to solve problems of quality Print. Follow the steps to see if that will help solve the problem.

  If you still have problems you can uninstall and reinstall the latest version of the software.

  HP Color LaserJet CP1215 Printer Drivers. Select the operating system, and then click Next.
  Click on driver - product Installation software and download the drivers.

  Then try to re-run the cleanup page.

  This happens with all applications?

  What kind of paper do you use?

  You use genuine HP toner?

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a great weekend!