Lost router CD

Similar Questions

• Wireless-G Base Station MN - 700 lost router password

  I have a great wireless connection between two computers in my house. If you wre to bring your laptop into my home and try to connect to the internet, would be good a signal available. My problem is that it requires a password, I forgot, to complete the connection. Please give me instructions on how to locate or create a new password for this connection. Step by step would be helpful, I initially had the wireless installed by a stranger and am not that computer savy

  Search guide to the router and find the process of how to reset to the factory settings.  This clears the settings to connect to the Internet, the wireless network settings / password and the password.  There is no method to find lost passwords.

• WiFi connect to my router causes my development to restart

  Hello

  I'm having a problem with my prosper since that my router is down

  At the start he's trying to connect to my network, connecting its account, it restarts and keeps cycling like that until I turn off Wifi or forget the connection

  Initially, I had no problem happens only after the crashed\lost router connection.

  If I do a factory reset I can join the network and everything seems to work again.

  When I try another network (office) it seems to work

  Any idea whats causing this and how to fix it

  Thank you
  Ulrictar

  > If I do a factory reset I can join the network and everything seems to work again.
  So, what exactly is the problem? This problem was solved by adjustment of the Android OS to factory settings maybe something was wrong with the settings or the Wifi configuration. Would recommend to monitor or to this configuration once more.

• New router lost Time MAchine

  Now later in my problems without end with networking...

  This morning I installed a new router (former a packed) which is identical to the former - a BT Home Hub 5.

  I had a list established this:

  

  ... that is the time Machine / aka basic Station (why there so many names!) has been connected to my network via Wi - Fi.

  Now I have the new road, everything is set back to how it was before aside, I lost the TC. The reason is that the new router, even if I have named themselves, they have different WiFi key password (of course).

  I see this now:

  

  I can see in the upper left corner, he found a point WiFi (TC), but whenever I'm going to add it, it seems to want to replace one of my other components. All I want to do is get back to where I was, with her concected 'Abbey Home Office' and not 'Cook' etc. I join my back ups of the last year to be always accessible! This is the point of a Machine of time after all...

  When I installed it initially, I'm sure that I had to set up wired - but can I use the WAN or LAN port on the TC and can I connect on the Mac or the router.

  So confused...

  It really should connect the TC in one of the other airports... the main router or what you called Hub... it makes no difference as long as the main router is also a gigabit.

  Setup the TC in bridge mode and create a... wireless network you can use the same name for the wireless as the rest of your network... but it should be noted that this sometimes causes issues if you have the computer plugged into another airport or the main router... for now a problem... Time Capsule recovery online... (It's a Capsule time btw...) Time Machine is the software on the computer that performs the backup... the two are not related in any way, but apple has mightily confused the issue. )

  If the automatic configuration does not do it manually.

  Here is my latest version of el capo...

  Re: Failure airport Time Capsule?

• I lost connection on the computer like many light wireless wireless router.

  I've got three Kindle and a laptop computer, more my PC connected

  Original title: I lost my WiFi connection at home in light of the route for the wireless is not lit.

  Hi geraldthorpe,

  Thanks for posting your query in the Microsoft Community. It seems that you have no internet connection on the computer. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.

  We start with a few questions-

  (1) what is the version of Windows installed on the computer?

  (2) you are able to connect to Internet via LAN cable?

  (3) are other computers at home able to access Internet?

  (4) do you get any error code or error message?

  (5) have you made changes on the computer?

  I would like more information about the issue.

  Method 1-

  As a general rule, if the wireless light is not on the router means that the ability of routers to transmit wireless is lost.

  The router has generally, 4 types of fires.

  Power - number 1

  Test - number 2

  Wireless - number 3

  Internet - number 4

  Numbered LAN are turned on only if a network cable is connected.

  If the computers are connected wirelessly, all the lights except the indicator light should light up.

  I wish you perform a reset and a cycle of power to the router.

  Reset the router-

  You must locate a set PIN size behind the router and press the reset button with a pointed object for 10 seconds. Now, release the button and wait for the lights to come back.

  Note If the wireless light is back on.

  Power cycle-

  I wish that you unplug the router from the power outlet main and plug it back again.

  Check if the problem persists.

  Method 2-

  I would have you look at the article-

  Network convenience stores

  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 3-

  I would have you look at the article-

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/is-is/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  We know if you need help. We will be happy to help you.

  Thank you.

• How can I reset or fix my router wireless or (lost the ability to connect wirelessly to the internet) access point

  Wireless hub works, other computers are connected

  On a laptop, I lost the ability to connect wirelessly to the internet (message: limited connectivity)

  Recommended by the system solution: reset or repair your access point or wireless router

  How can I do?

  I think that what you aim for is "power cycle".

  To do this, simply unplug the router/access point power adapter. Wait a minute. Then reconnect it.

  Hope this helps

  Post back if necessary

  ___________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Wreg54g lost connection after a reboot of the router

  Hi everibody! I need your assistance if anyone can help me... Recently, someone helped me and installed my Wreg54g.after some time, I had to reboot my router so I can connect my phone (it had to be directly to the router... so I had to reboot). After this operation, my amplifier lost blue light, a red connection.one... so I pressed the auto configuration button, two lights transferred to the Blues, but again, I do not have the full signal on my comp.what I did wrong, how can I solve this problem?

  According to me, that the settings on the range extender had been dirty so you press the AUTO Setup button when you tried to reconnect if it is understandable. What I suggest, is to ensure that the wireless internet works fine via the router, then on the WRE54G, configure the wireless settings again manually (without executing the implementation of CD) the same thing with the router. Check on the items below to guide you in the implementation of the Extender manually. Moreover, firstly, the Extender reset before the reconfiguration.

  Setting the amplifier without the installation CD

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=4d0870bf247a47e5b49b945a7a1ff515_Setting_up_the_R...

  Other references:

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=a3f6ea1b147844c090f7227d504ddbc1_.XML&PID=80&resp...

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=3723920ab5ec46f0a6d6a4f831e55b06_1488.XML&PID=80&...

• I lost my router user name and the password and reset does not have without the router

  I haven't used my router wireless of Linksys WRT54G v5 for about 1 1/2 years and he needs now to a new place.

  I put a username and password I forgot for a long time for access to the web according to the security protocols for the modem and I lost the disc for the program control protocol.

  I tried pressing the reset button to clear the modem and it took the WPA Protocol off the power to the modem, so I can use it without any security, but this isn't a good thing.

  Help! How do unlock it so I can get to the security protocols and put back the security on my modem?

  StephanieD wrote:

  I haven't used my router wireless of Linksys WRT54G v5 for about 1 1/2 years and he needs now to a new place.

  I put a username and password I forgot for a long time for access to the web according to the security protocols for the modem and I lost the disc for the program control protocol.

  I tried pressing the reset button to clear the modem and it took the WPA Protocol off the power to the modem, so I can use it without any security, but this isn't a good thing.

  Help! How do unlock it so I can get to the security protocols and put back the security on my modem?

  To release your router to your previous settings.

  RESET the router the button is @ the back of it.

  Connect a computer to one of the ports numbered on the router.

  Access the UI of it http://192.168.1.1

  User name: (BLANK)

  Password: admin (all lower case)

  

• Old Airport Express lost after reset of the router, the connection cannot be seen/accessed

  the train:

  -Mid 2009 Macbook Pro, OS Yosemite airport 6.3.5 10.10.5, utility

  -Existing wifi network via a former Ubiquiti AC wifi or router which gets internet radio antenna on the roof of the local ISP.

  -old (1st gen.) A1084 Airport Express used only as a customer to listen to the music of the said Macbook.

  I am a musician who has been using my old AEX to listen to the music and the recording via Airplay and Airfoil for my Roland onstage for years without problem. I don't remember how I initially put in place, but I think it's as a customer only... IE, it broadcast as its own wireless network, or extend my network wifi etc, I just use it for listening to music.

  Well, a week earlier, a disgruntled rogue ex-my local ISP hacked their radio tower and all the customer routers turned into useless bricks (and also all our wifi network names changed to a name that begins with "mother" and ends by "-ers", but that's another story).

  Local ISP technicians have managed to get my router all re - set up and working, but I had to reconfigure my wireless devices (example: wifi printer) from scratch to be able to connect again.

  The tenacious hold on is this old Airport Express.

  I try to use the instructions found online to get connected again, but nothing does.

  Yes, I tried pressing the Reset button for 10 seconds, etc... He just goes at once orange flashing or sometimes solid orange light, and don't see the Airport utility. I tried to plug its ethernet port to the router's LAN port to see if the Airport utility, would see no change, Airport utility requires no base stations found. It has no Airport icon in my menu bar and no Airplay icon in any relevant application such as iTunes.

  Remember that in past I was able to reset/reconnect after network changes, it seems to me (I don't remember how). BTW, its location is located a few feet from the router, in order to hang it up through ethernet is easy if need be.

  Once again, I only want to not to listen to the music and the tracking records of my Macbook. Roland aren't in a convenient place for an electrician. As you can tell the age of my stuff, I'm a starving musician, don't want to have to buy something new.

  Help?

  Hello lisajoy,.

  Thank you for using communities of Apple Support. I see that you are having some connection problems with your AirPort Express Terminal. You did a great job trying to get this resolved on your own! I'm happy to help you.

  To solve problems, get connected Airport please try the steps in this link:

  AirPort Express: How to join an existing Wi - Fi network in client mode

  If you connect and are experiencing problems using AirPlay and iTunes heres some more information:

  Wi - Fi base stations: how to install and configure AirPort Express for AirPlay and iTunes

  Have a fantastic day!

• Printer lost access to internet when the router has been changed

  My HP Photosmart Plus is connected wireless to my macbook air and has worked well for years.  Our company has a wired connection, enter into a linksys/cisco router and it gives access wireless via an SSID on my mac and your printer.

  A few months ago, the router has been changed and they did something for cable and wireless.  Im guessing they're on separate subnets or something because it is another problem is that I can no longer view the others on the network who are wired, even if I could before.

  In any case, ever since this time, I noticed that some smartphones and tablets had no internet connectivity.  They were connected to the wireless network that gave my internet connection perfect Mac, their signal is just as strong, but they had no internet connectivity.  So I figured that the DNS' have not been read right by these smartphones and tablets, I manually added the DNS' using my mac and now these phones and tablets work very well.

  I guess it's the same problem with my printer now because the only thing that doesn't work is eprint and web services.  I get a message saying that the printer could not reach the server, try again.  Ive restarted the printer and it doesn't matter.  I can see it has a properly assigned IP and I can print wireless for it, but there is no internet access.

  How 'to add' those DNS IPs to the printer?

  Hello quique123,

  Welcome to the Forums of HP's Support.  I understand you get a connection error message when you try to activate your printer Photosmart Plus web services.

  I've included a link to another post with measures, including screenshots, on how to set manual of the printer an IP address manually and DNS servers. As you go through the post, you will notice that it is recommended to use the Google public DNS servers when you set manual DNS servers.  Please do not worry that the screenshots are for a Photosmart 7510, the steps are the same for your Photosmart Plus printer.

• Has lost all contact with BEFSR41 router via network

  Hello

  in this thread: -.

  http://homecommunity.Cisco.com/T5/wired-routers/BEFSR41-v3-activating-UPnP/m-p/101243/highlight/true...

  posters describe the problem that the original password is damaged if UPnP is enabled.  A poster gives the password which is replaced in an arbitrary manner, but when I tried (after having the same problem), I couldn't make it work and he had to restore factory settings and repeat the configuration from scratch.

  Now, for some reason, I can't do it yet!  "admin/admin" is no longer accepted, and if instead, I try to open the configuration using the Wizard installation CD I get an error message saying "unable to connect...". "and tells me to press the"reset"button (which of course I did, nothing helped).  However, ping the router produces an immediate response with success and my internet access is as before.

  Please, what can I do to get out of this endless loop?  There are some configuration changes, I need to do and I can't!

  If your router works fine then you don't need a re-flashing the firmware on your router.

  As far as disable UPnP is concerned, maybe it's a bug in the firmware.

• WRT54G2-Lost username and password for router Web page

  When I type in my router (WRT54G2) Web page he asked me a username and password as usual.  But my problem is that I forgot my username and password.  So, how would I be able to find it or reset it?

  You need to reset the default router by pressing the reset for 30 seconds button... There is no other way if you forgot the password...

• New router, lost wireless connection

  Hello

  I have a wireless photosmartplus B209 printer and recently changed my router, now I can't send the printer to one of our laptops. I know the ssid and the new router network key, where can I get these to get the printer to print wireless? Have spent hours on this nothing will do, any suggestions gratefully received! I'm computer semi-literate if not bad words please!

  Thank you in anticipation

  rogerthelodger

  Since you reset the printer back to factory settings, you will need to go through the USB to the configuration wireless again. Looks like you already know this, but it gives you problems. I would uninstall the software and the driver for the printer from the computer. Once you have done, you will then be able to install the software and the driver for the printer again. When installing, it should ask you how you want to install the printer. Tell him you want to do a wireless installation. Installation should then ask you if the printer is already on the network, or if you need to connect the printer to the network via a temporary USB connection. Choose the option that uses a temporary USB connection. Who should return you to printing. I will include links to the document that will help you get this all sorted. Let me know what happens.

  Uninstalling the printer software

  Installation of the software of the printer on a wireless network

  HP Photosmart full feature software and drivers

• When Photosmart C6380 connects to the router Netgear WNDR3400, internet connection lost.

  Using HP Photosmart C6380 wireless connection to a Netgear WNDR3400v2 router.  When the printer is on, all devices of lose the internet connection, but can be crazy.  Network WPA2 authentication. the printer shows WPA authentication configuration page so maybe that's the problem.  How can I keep my internet access while the printer is connected to the network?

  FRST, make sure that your router has the latest firmware.

  Let's define an IP address static and exeternal DNS of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• lost my ipad on 26 September on resting on 285

  I lost my I - Pad 26 September 2016 on Route 285, approximately 16 miles north of Salida.

  I went by mistake in a black DODGE CARRAVAN having the same color and shape for my car parked next to him. A man with his son came to warn me of my mistake. His mother remained at the picnic table.

  I left the car without taking my IPad. The owner must contact me

  anyone has a suggestion how to get back the IPad?

  < emails published by host >

  Nothing to report