When Photosmart C6380 connects to the router Netgear WNDR3400, internet connection lost.

Similar Questions

• Questions to access the router Netgear WNDR3400 of laptop Readyshare USB disk 64-bit Windows 7

  I have a laptop of 64-bit windows 7, which is connected to the router of netgear wndr3400.

  I have a USB key connected to wndr3400.

  This drive is supposed to be accessible through the path of the \\readyshare\USB_Storage, but I can not connect by typing the path and I'm not under network. I tried to wire the laptop to the router, but the path of the \\readyshare is still not accessible.

  There is no firewall on the laptop.

  I see other computers on a network in the same network the laptop.

  I also have a desktop that is connected (wired) to the router, and the Office can see the \\readyshare subnet. The office is equipped with Windows vista 32 bit.

  I would appreciate your help in how to solve this problem.

  Hello

  Try to redo all the sharing system around a working network configuration.

  --------------------------

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account on the computers they are allowed to connect to everyone is an account, that means a group of all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I add HP Photosmart C6380 printer in the HP Solution Center?

  For some reason, the HP Photosmart C6380 all-in-One printer has disappeared since the HP Solution Center, if I can do is no longer any proper alignment, cleaning, etc. How can I add the HP Photosmart C6380 printer in the HP Solution Center?

  Thank you.

  Disconnect the printer, uninstall the HP software through programs & features, reboot, then install HP full feature software for HP, specific to your version of bit of victory and linking only when prompted

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=3560280#n193

• Photosmart C6380 - cannot delete the document removed from the print queue.

  Photosmart C6380 - cannot delete the document removed from the print queue.

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler , made service right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• I upgraded Windows 10, now when I open Photoshop Elements 10, I get a message that I need to Internet Explorer version 5 or later for all the elements to Photoshop to work. When I try to download the latest version of Internet Explorer, I said that I have

  I've updated to Windows 10. Now, when I open Photoshop Elements 10, I get the message that I need Internet Explore version 5 or higher for Photoshop work properly.  When I try to download the latest version of Internet Explorer, I get a message that I already have the latest version. SO, what should I do?

  Settle in the right forum.

• Wmp300n connection to the router Netgear WGR614 G problems

  I'm new here so I want just to say hi first.

  I've been lurking here for a while because I bought my 300N. So far, the monitor is undesirable now it is uninstalled and all the drivers are installed. When my DD - WRT flashed WRT54GL is my main router this card is ideal. But I have another problem with two Xbox 360 who do not want to use the same service at the same time, so I bought another router. The Netgear WGR614 v.9.

  I have the 54GL router on a bridge wireless for the 360 so I can have both on the net at the same time. Even when the netgear router is the main router... This 300N wireless card has worked with him for about 10 minutes then just loss of signal. It will not reconnect no matter what I do. I reinstalled it and it still does not connect. The 54GL router is connected to it very well and works.

  There is a problem with the Netgear router what is the map?

  Please if anyone knows that would be great for a response. All forums I go I always ask difficult questions and they never get answered. haha.

  UPDATE: it turns out that it is the fault of WRT54GLs. The DD - WRT software cannot do the job of a customer right wireless I guess. The Netgear router shows that it gives two IP addresses when the router connects with the xbox. It gives the IP router and the xbox and the INVESTIGATION period. But then show that they share the same MAC address. DD - WRT is the MAC of the XBOX and the same as making the MAC like DD - WRT. And no matter how many times I change the MAC it they are both the same to come.

• M40X connects to the router Netgear DG834G wireless

  Message on the toolbar and warnings are; No limited connectivity or. Improved Intel Pro wireless 2200BG driver worm 9.0.4.8 without success.
  I have another laptop with a USB wireless network too and that works very well.
  I was able to connect to the router via the ethernet card.
  Been on Netgear, and the router works well.
  Any ideas, anyone please...

  Hello

  I guess that your laptop uses the map Intel 2200BG wireless.
  You will find a lot of questions and problems with this card intel.
  Mainly the graphics driver update will solve these issues.
  You can also check the power save mode settings in the properties of the wireless card. Go to the Device Manager, choose the wireless card and go to properties. In the second Advanced tab you should find the Power save mode option. Please switch off (off)

  I put t know where you download the driver, but you must use the latest version on the Intel site.

• WRT150N wireless - download speed of connection is super slow when I move away from the router.

  I have a suggested internet high speed through Comcast, and my wired computer is get 6 download MBS. My wireless laptop is close when I'm a few feet from the router, but decreases significantly when I move out of the room - up to 200-300 KPS.

  I can't even watch a movie from netflix on the floor without stopping and buffering several times in a 1/2 hour show.

  Long-story-short: I expect too much on this Wireless N technology, or is there something wrong with my router, connection, configuration, etc. ?

  The strenth of signal on my laptop shows excellent quality for good, but the speed is terrible.

  Any suggestions / advice?

  JL

  It could be due to the wireless settings are on your router has its default value, which is the reason why you might be faced with the problem. I think you need to change some settings in your router...

  Connection to the router configuration page and then click on the tab below the Strip Radio Standard - 20 MHz and the Standard 11 - 2, 462 GHz channel change and wireless... Wireless SSID broadcast should be enabled and then click on save settings...

  Then click on the "Advance wireless settings" sub-tab and below change the tag to 75 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now let's see if you can locate your wireless network and try to connect...

• Connection is de-energized when (not if) away from the router

  Hello you all fine technical staff.

  My name is Jake and I have a technical problem.

  So yes, the connection is either super slow or de-energized when I'm in my room. I am writing to you in the room next to the router and everything works A OK. But I'm going to the 7 additional meters to my room and the beginning of the problems. I have even a booster dose is plugged and it's on the same office that the laptop, but the problem persists. I'm getting full bars, but it still has problems.

  Is it maybe a problem with my wireless card? Or is there something interferes with the signal? Its a mystery wrapped in an Enigma, and I hope you smart people can help... Please.

  It could be many things, but first of all, I would recommend making sure you have the latest drivers available from the manufacturer of the system.  In this way you even if you have problems, you just the best possible start to their fixation.

  To do this, visit the Web site for the company that built your laptop (Dell, Asus, HP, etc) and go to the drivers/download section, choose your model and get the latest updates available for your wireless drivers.  This would not be a bad time to make sure that you have the updated Windows 8.1 and all other updates too.

• CONNECTION PROBLEMS WITH THE ROUTER (NETGEAR) - no problem with the provider of speed as it has been checked__

  • Programs you have problems with - very slow connection with all pages
  • Error messages - on the profile of my son is unable to connect at all with the error message
  • Recent changes made to your computer - windows 7 but added meeting the problem before this
  • What you have already tried the problem - claimant contacted no problem with their connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Reinstall the NIC drivers
  Reset the router and check.

• Samsung S6 connects to the router but no internet

  When I switched to xfinity I bought a C6300. I had problems with the first not allowing my NAS to connect so I exchanged against another. My phone would connect to the router and work fine for awhile then lose Internet connectivity. The only way to get it back is to reboot the router. I tried several different units, and I am now on a C3700. The problem still exists and seems to be deteriorating. All of the suggestions.

  I solved my problem by replacing the Netgear with a Zoom. It was the only one that I could find who said it would work with Android. I hope that Netgear will get things straightened.

• WRT110 disconnects when multiple PC access to the router

  I am new to router technology and have had my router wireless of the WRT110 for almost a year.  We normally have one (sometimes 2) hard laptop computers connected to the router, and a third computer laptop wireless connection.  It seems that when my other child is home from College and connect wirelessly to the router all the connectivity for all PC gets declined.  Connectivity behaves as if it is connect and then disconnect frequently.  When my child goes back to school we have usually not problems more.

  Am I overload the volume of traffic on the router with 1 2 wireless and 2 wired or wireless Wi - Fi and 2,?  An electric bike helps sometimes, but should I always have to do that?

  Any help will be appreciated as I learn best practices for this device.

  See you soon!

  I changed the settings you suggested and connectivity has been solid as a rock!  I had several laptops and wired PC on and the signal remains solid.  Hope that he holds at the time of my other child home from College.  Thanks much for the advice.

• Photosmart 6520: cannot locate the router x 64

  All of a sudden my Photosmart 6520 has lost its connection to the wifi network. He does not see the wifi network, even if the printer is 1 foot from the router. It is not a new router, or any other new hardware - all of the other computers, ipads, etc. in the House can always see and connect to the wifi network. I hard rebooted everything and the printer, no help. I also tried renaming the wifi network - Photosmart still could not see. It is confusing to me - why the printer can not see the wifi?

  Move printer at least 4 feet of router.   Power off the printer and the router.  Turn on the router and wait 3 minutes.  Turn on the printer and check now.

• I can connect to the router but no internet connect windows 8

  I took each of boredom that my NEW HP envy provides however I still get a no internet connect error.  If I reset my router and checked that it is acceptable.  I can reset everything and internet will work for no more than 30 sec. I know that the internet is able to work as I plugged the ethernet cable, but I want it is wireless! What to do next! ?? !!

  Hello

  Check with HP Support, their online documentation and drivers, diagnostics,
  and ask questions in the forums about known problems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ===============================================

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">