Lost Screenlock pine (Webos doc has failed)
I have not used my touchpad for mths... yesterday, after I take took my touchpad fees it and try to use my touchpad, I discovered that I don't remember the PIN to the lockscreen.
I went online and google for help and found something called WebOS Doctor. But I m cannot be used, the webos doctor can't detect my touchpad when I connect it to my office. (maybe because it to connect to my office in charge mode)
I tried to reboot or shutdown my touchpad using the power button, but failed too. I saw a menu to stop but the screen lock me disable to select one of the options...
I need serious help here... I have to empty my touchpad to helpless until I can fix this?
Oh dear. WebOS Doctor says that it has been disconnected?
No doubt ty to return yout TouchPad in USB mode and try again webOS Doctor. Sometimes it just fails. WebOS Doctor failed once on my TouchPad, so I tried again and it went smoothly. Who knows why...
That's what I found about the webOS Doctor curtain at 8%: http://www.webos-internals.org/wiki/How_To_Recover#Doctor_disconnects_at_8.25
Tags: HP Tablets
Similar Questions
-
Original title: print spooler does not - error 1053 - Windows 7
I have a HP Pavilion dv4-511 with Windows 7. 2 weeks ago I ran a Windows Update and all my printers installed have disappeared after a reboot. I did a system restore and they were all back. Yesterday, I installed an update to a software (Soonr) and it's the same thing. I clicked on the print spooler service to see if I was able to restart and got the error 1053 saying "service did not respond to demand launch or control in a timely." If I click on "Add a printer" in the menu devices and printers, I get the following message: "Windows can't open add printer." The local print spooler service is not running. Please restart the spooler or restart the machine. "I rebooted the computer and the same thing continues to happen. I did a system restore and the printers are all back. It seems that every time there is a change to any software, it creates this problem. Help, please! Thank you.
Hello
Welcome to the Microsoft community!
When the updates are installed, the printers will be lost and when you try to start the print spooler service, you get the service saying error 1053 has failed to demand launch or timely control.
The problem may occur if some system files are corrupted or because of malicious content.
I suggest you follow the steps mentioned below:
Method 1: File system (CFS) Scan Checker
SFC scan will find all missing or incorrect system files and repairs them.
See the site:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2: Scan the computer to remove all possible malicious content
See the site:
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx .
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
I have been a token of debugging and apps on my device Z10 hundreds of times from the command line and Momentics but this time I am confused.
I am trying to create a token of debugging (in command line and Momentics) and deploy it in my Z10 camera, but it does not work. In both cases, I get the following error.
"Error: Code signing request has failed because the value debug token of Type Package is not allowed."
2 things have happened recently that make this potentially different situation.
a.) now my device is currently running OS 10.2
(b) there was something new regarding signing apps with your blackberry ID?
I was a little out of the loop for 1-2 months so please forgive me if this problem is very obvious... I am looking for a clue to what I'm doing wrong.
This has been fixed on both of your accounts. It was a problem of account setup. We're looking at what caused it to prevent it from happening in the future.
-
During an office automatic however, patch cumulative for Activex killbitts for windows XP (KB2736233) has failed. error code is 0 x 80070017... How to fix this? He tells me that the installation failed, and when I close it, it asks me to install the update even. Thanks in advance for the help.
Hello
1. have you made changes on the computer recently?
2. What is the security software installed on the computer?
3. are you able to install some other updates?
4 is that the problem is specific to this update?
I suggest you to follow the steps in this article and I would like to know the status.
Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: '0 x 80070017': http://support.microsoft.com/kb/956704
Important: While performing the check disk on the hard disk, if bad sectors are, check the drive will try to repair this sector. All the data available in this area may be lost.
I hope this helps.
-
The Windows Installer
I use vista ultimate and get problem with Rogers online protection. When I try to install, I get the message "microsoft windows service install is not accessible, or has failed." This happen if windows install is not properly installed. This problem prevents the installation of the Roagers online protection. "How can I solve the problem. I need help, people. I'm lost. Thanks in advanceHello
Right-click and 'windowsxpkB942288-v3 - x 86 .exe' and then select 'Run as administrator'.
All the best!
-
Problem installation AutoVue - deployment of application in the field has failed;
Full of the error:
Deployment of application in the field has failed; Deployment error - Exception has occurred in the javax.xml.ws.WebServiceException of wsgen process: cannot create JAXBContext deployment error - Exception has occurred in the javax.xml.ws.WebServiceException of wsgen process: cannot create JAXBContext.
Sun GlassFish Enterprise Server v2.1.1
This error occurs when == > http://localhost:4848 / | Console mgt GlassFish 2.1.1 | Web applications | Deploy | Web application, AutoVueWS.war
Background:
I am an Adobe Flex coder threw in a Silverlight project, trying to get a JavaBean to work.
My task is to get a DGN file to display in my Silverlight application. I tried to fix this using AutoVue as a web service returns an image and displaying this image on my control. This, of course works fine on the last machine of developers. However, I've been totally failed to install on the client server. I have no real idea of what I'm doing with the GlassFish/Java/AutoVue for this project section. Any help would be greatly appreciated
-I have have Glassfish installed v2.1.1 and seems to work correctly.
-I used it C:\Program Files (x86)\Java\jdk1.7.0_21\bin\jar.exe' cvf - AutoVueWS.war - C AutoVueWS.
to compile the war file.
-Server = Pro, 2 GB, Windows 7 64-bit * Virtual Machine
Post edited by: 6bf38c5b-5aea-4186-9e77-bf1326cfd283
New "6bf38c5b-5aea-4186-9e77-bf1326cfd283," Hi
If all you need to AutoVue for is the conversion of an input format (for example, DGN) in a PNG image format, so yes, it's a case of using the AutoVue Web Services API (more precisely "convert it" Web Service). In this case, you should proceed with the question of GlassFish forums so they can help solve the deployment problem.
However, depending on how you obtained your Silverlight solution implemented, it might be even more efficient/transparent to avoid the conversion completely process and simply stir the applet AutoVue in the interface of your solution. In this case, users would see their files (in whatever format or DGN) directly within the AutoVue applet, and you can customize the user interface of applet according to the needs (in terms of menus/toolbars tools/etc). If this is of interest to you, check out the Guide of AutoVue API at http://docs.oracle.com/cd/E37436_01/otn/pdf/E37455_01.pdf
And to answer your last question - no, there is no way to communicate directly with the server of AutoVue. The AutoVue API and the API of Services Web AutoVue are the two APIs on the client side.
Thank you
Graham
-
Uninstall an Adobe Master Collection after that my computer has failed
Hello, I bought an Adobe Creative Suite Master Collection CS5 in 2010. I get two licenses and I installed it on my devices two mac: a mac book pro and a mac pro. A few days ago my mac pro has failed. I brought to the Genius Bar at the Apple Store, but they couldn't fix it. It was not until I could uninstall my creative suite (or any software). I get a new mac and I want to recover my second license to install on my new mac. I just called the adobe Help Center and they said it's ok, but I have to ask my request here. Could you help me? Is it possible to uninstall one of my two licenses? How could I do? Thank you for your attention and support. ChrysOrsat
Your first instinct was correct. Their direction wasn't you. You need to contact Adobe technical support and they can take care of freeing all lost activations. If you contact them through chat should not deny you this service.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Serial number and activation support (non - CC) chat
http://helpx.Adobe.com/x-productkb/global/Service1.html -
I'm trying to migrate all my email from Thunderbird to my Google Mail account. I have my old email into local folders, and I have my Google email account set up successfully as an IMAP account. I'm dragging E-mail folders under local folders to folders in the title of the IMAP account.
Sometimes it works fine, but most of the time, I get an error "the current command has failed. The e-mail server for account [email protected] replied: not able to analyze command. "I can often with success select and drag 30 messages, but sometimes it fails with even a single message.
Any suggestions?
Several suggestions.
1 turn off email scanning in your anti-virus product against struggle.
2. create an exception in your anti virus for Thunderbird profile folder.
These two just release the process and remove barriers to the process.
3. check the amount of data you have used for 24 hours. Google have a limit. about 200 MB I think. But I can't really remember. -
Sending the username and password has failed. Need help!
I was denied the opportunity to send messages. Received a notice: "the sending of username failed. Mail server mail.comcast.net answered the authentication has failed. What to do? I don't know what happened. I could send and receive yesterday. Please notify.
Post your troubleshooting information for your server settings can be examined.
Helps in the menu. Troubleshooting information. Clear the check box to include the account names. Then click on copy to the Clipboard. Come back here and paste in a window of response. -
This morning my password has failed, though even I nothing changed
I'm unable to access my email account. I get the following message: send password for user Purpnet has failed. Mail server pop.verizon.net responded: authentication failed
I have nothing to engage this failure. Can you help me?
Since I can't access my e-mail, please respond to [email protected]
Thank you.
We respond to the address that you specify in the forum.
Please send your account settings to correct information in the Help menu. I guess that Verizon finally extinguished some inherited settings that have not been updated, which is the usual cause anyway. Or your anti virus is having a spasm, but lets try easy things first.
-
My T-bird was working fine last night but this morning I get an error message starts "the RETR command has failed..." "whenever I try to retrieve new messages (he tells me there are 23 of them), I get this error message. I use the version above on a Windows XP machine running.
No one here has the ability to do anything to your email address. Your email provider was just having a bad day and it is corrected now.
-
Hi all
I'm completely ignorant when it comes to Apple Script and I'm trying to get this simple script to work. The purpose of the script is to save attachments in a folder named when I run on the Apple Mail messages via a rule.
This is the code:
Tell application "Mail".
theMessages set of selection
Repeat with thisMessage in theMessages
the value of the theAttachments attached to a letter of thisMessage
Repeat with thisAttachment in theAttachments
the value theAttachmentFileName ((chemin d'accès àle texte riche de la règle de type dossier de départ) & ' treatment of the Documents record: Hazel ") & name of the thisAttachment
Save thisAttachment in file theAttachmentFileName
end repeat
end repeat
tell the end
The folder does not exist, but I get a "error " Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000 "when I run.
The code in the Script Editor editor also inserts "type of rule" in my code, so I guess that my syntax is faulty.
Any help would be greatly appreciated.
Kind regards
Beem
If ' folder of treatment of Hazel ' already exists in the Documents folder, the following script of GUI, which seems to work perfectly under OS X 10.11.3, should do what you ask for:
Try
game of theDestinationFolder to ((path to the documents folder) as text) & "Hazel treatment record" as alias
on error - file does not exist
return Beep 3
end try
say application "Mail".
activate
the value theMessages to the selection
Repeat with thisMessage in theMessages
thisMessage Open
say application 'System events' to say process "Mail".
click on menu item "Save attachments...". " of 1 of the 'file' menu bar item menu of the menu bar 1
Repeat until sheet 1 window 1 is
end Repeat
key sequence "o" using { control down,shift down}
key sequence "Nutty".
click on button 'Save' of the sheet 1 of window 1
Repeat while sheet 1 window 1 is
end Repeat
key sequence 'w', using {control down} - close this message
end say
end Repeat
end say
-
the application has failed to start because its side by side configuration is incorrect
I downloaded the new firefox and when I try to open it I get this message that the application has failed to start because its side by side configuration is incorrect
Seems to be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side).
You can try to use the sxstrace tool to see if you can find which files are missing or damaged. -
Qosmio X 500-10T - integrated controller has failed
: The embedded controller (EC) has failed in the specified time-out period. This may indicate that there is an error in the EC hardware or firmware or BIOS is accessing the EC incorrectly. You should check with the manufacturer of your computer for an updated BIOS. In some cases, this error may cause the computer to function properly.
Hi all
Now, I get an error very very annoying.
Qosmio X 500-10T is freezing with more frequency with the message above in Event Viewer.
I reinstalled Windows 7 to factory settings and added all fixes Windows 7 etc with no luck to solve the problem.
I also installed last BIOS update.
Any ideas what to do?
Thank you.
Hey Buddy,
I agree with the user above. If you have already reinstalled Windows 7 back to factory settings and installed the update to the newest BIOS, it seems to be a malfunction of the equipment. In this case, you need professional help from an authorized service provider:
http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service providerIf your laptop is under warranty, the repair process is free for you. :)
-
We found no boot disk or startup disk has failed?
OK, so yesterday my wireless mouse is broken, I restart my computer to get it to work again. When I did, it has not fixed my problem, so I went online to see some solutions. When I went on a secure site, I got an alert on my computer and something about 2 programs being completed. It seemed was going to turn off the computer, and in a panic, I turn it off. When I turned it back on, it went straight to the verification of the startup disk. And it gives me the message: no boot disk was detected or the startup disk has failed. I got it a couple of times before and all I ha do turn off two or three times, and he'd turn out normally. It won't work, and I tried several ways to remedy. I clicked on F2 and F8 a F11, but nothing works, and I do not have a cd with media recovery settings. Any help would be appreciated.
When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.
Turn on your computer and immediately start typing the appropriate key 'F' to run the hardware diagnostics or system on your computer. Then, run the hard drive test and report the results. If the hard drive has failed or is about to fail, you may need to replace the hard drive. If the hard drive is reported as 'OK', the boot sector, or the hard drive was damaged and the operating system must be repaired or reinstalled.
You may need to use your HP recovery disks to solve each problem above. If you create your personal series of HP, as suggested by HP recovery disks when you configure your computer... you will need to order a series.
Please send BRAVO
Maybe you are looking for
-
HP Pavilion notebook pc p001tx: unable to find audio beats after upgradation from windows 10
I have updated my windows OS 8.1 for windows 10 previously audio beats laptop after upgrading pc speakers it's been showing realtek high definition audio. I completely lost my beats audio experience. Please guide me how to fix this problem
-
Could not resolve the error 0x8DDD0007 - reboot required
I get this error when I try to run MS Update on three computers. It offers two solutions - reboot the machine, makes no difference - remove the rebootrequired registry key, it is not present anyway. A machine, that I had just completely reinstalled
-
We will look for answers why my printer prints more than necessary?
See my printer to print a test page after each time I use it.
-
I am trying to activate Office 2007 Home.
When I try to activate the components, varoius online I get this error message "a communication error has occurred. Unable to process your request at this time. Please try again in a few minutes. "Nothing happens no matter how many times I try all th
-
I just installed an ATI Radeon HD3850 graphics card in a computer, I am running Windows 7. The other graphics card is a Nvidia GeForce 6600GT. The app for Windows 10 (GWX) always reports the Nvidia card is still in the computer, but it is NOT. How