Lots of application lib of the object across multiple forms

Similar Questions

• Replication of the object - sharing multiple files

  Hi all,

  When file sharing I create the shared file data blocks, then

  call addHaveObjects

  netGroup.addHaveObjects (0, packetLenght);

  where packetLength is the number of actual data segments are split.

  I added headphones for the request and the result

  NetGroup.Replication.Request

  netGroup.writeRequestedObject (event.info.requestID, object.chunks [event.info.index]);

  NetGroup.Replication.Fetch.Result

  in the info.code I would iterate through the pieces and addWantObject(i,i), where i is the current chunk, like that I would add all the pieces to addWantObject

  Problem

  This works very well when sharing file for other peers, but only first time, when I repeat the scenario once more for the same or different, files that nothing happens.

  NetGroup.Replication.Request - is never called

  Source code around, that I follow to recreate the functionality of file sharing can be found at

  http://www.flashrealtime.com/file-share-object-replication-Flash-P2P/

  Index of the object are unique for the Group and they must always point to the same data of the object.

  When you do...

  netGroup.addHaveObjects (0, packetLenght);

  .. you're stating "I have these pieces of information ready to share" the Group
  Your second call with the same parameters have no effect, because you already said that and the group "is already" you have those. given that peers who wanted already they have these recoveries they are no longer needed and NetGroup.Replication.Request is not called again

  For a different file, you must assign a different id for 'startIndex' and 'endIndex' and make sure that beaches overlap ever; given your piece of code, it looks like you always start at 0; in the whole of the group never send different data in the same index of the object

• To access the objects in array form using javascript

  I hope, it's a simple question that I've been beating my head on the days...

  I have a form with several fields of the same name--let's call it the recordedHours of fields.

  Adobe assign an index for each instance of the field, so we will have to recordedHours [0], recordedHours [1]... recordedHours [30]

  Now, I need to set and get the values using Javascript, so something like:

  for (i = 0; i < = 30; i ++)

  {

  var h = this.recordedHours [i] .rawValue;

  }

  It does not work. Or don't complete a reference: form1.timeform.recordedHours [i] .rawValue

  or getElement: this.getElement ("recordedHours", i)

  or the dotted notation: form1.timeform ["recordedHours"].i.rawValue (syntax error, as I have, when converted to digital gives an illegal element/object identifier)

  I tried all the ways I see maybe get and set values through Javascript and I've searched high and low on the web but couldn't find anything - I know I have probably SUS (the stupid user Syndrome), but can someone help me out here?

  See you soon,.

  Marty.

  The problem is that you have to solve the expression to be able to get the right index finger, you can use the xfa.resolveNode syntax. This allows you to pass a string and that gets interpreted for you. So the syntax:

  for (i = 0; i<>

  var h = xfa.resolveNode ("form1. ("Page1.recordedHours [" + i + "']") .rawValue

  }

  Hope that helps

  Paul

• How to add groups of objects to a form?

  I'm working on my forms on Linux, Oracle Builder Version 11.1.2.1.0.
  
  Now, I want to use the Webutil library. After plugging in the library on a form, I need to add the Webutil.olb to groups of form objects.
  
  The documentation says to do to drag the object file to the node groups of objects on the form. But I can't drag the file to a folder on the node.
  
  Actually drag all files to open in the form designer is not feasible in the Linux version.
  
  I also tried opening the Webutil.olb first, it appears under libraries of objects, click on the file and drag to the node of the form, did not work.
  
  Anyone know how to add the object to a form in Linux Version Oracle Builder?
  
  Thank you!

  frank1018 wrote:
  I'm working on my forms on Linux, Oracle Builder Version 11.1.2.1.0.

  Now, I want to use the Webutil library. After plugging in the library on a form, I need to add the Webutil.olb to groups of form objects.

  The documentation says to do to drag the object file to the node groups of objects on the form. But I can't drag the file to a folder on the node.

  Actually drag all files to open in the form designer is not feasible in the Linux version.

  I also tried opening the Webutil.olb first, it appears under libraries of objects, click on the file and drag to the node of the form, did not work.

  Anyone know how to add the object to a form in Linux Version Oracle Builder?

  Hi Frank,.
  Open webutil.olb
  Select groups of objects in the form builder and click Create
  now, select the (newly created) object group and go properties and make the subclass
  1. Select the object
  2. Select Module: WEBUTIL
  3. Select object name: WEBUTIL

  Now press ok and fact...

  Fix webutil.pll and you're done.

  I hope this works...

  Hamid

• Separate an object into multiple objects w / Pen

  I am looking for a way to draw a single object, solid and then divide the object into multiple objects by using the pen tool. no other objects.

  Ex: Draw a solid cirlce, use the pen tool to draw lines on this circle (visually by creating different forms), then [be] with the original circle and lines drawn in pen to create the new objects/shapes.

  I've done this before by placing other OBJECTS on the original object and using the fracture or pathfinder trim switches, but using other forms (even online) has its limits.

  Any ideas?

  CS6

  Dan,

  We are not just talking object > path > divide objects below (when the drawn Pen path reaches or exceeds the paths below), are we?

• I'm trying to follow the video to "Change color" and I don't have a lot of options that uses the presenter.  I'm on a PC.  Can someone walk me by changing the color of an object step by step?

  I'm trying to follow the video to "Change color" and I don't have a lot of options that uses the presenter.  I'm on a PC.  Can someone walk me by changing the color of an object step by step?

  Sorry for the delay. Here is the video

• Transparently adding a criterion to all the objects in an application view

  Hi all
  
  We are migrating an application based on the forms in Oracle ADF and JDeveloper 11 g R2.
  
  In our application Forms, we add transparent business to all the blocks of data code where clause property by using the following expression: company_code = SYS_CONTEXT('erp$security_mgmt_ctx','company'). How this can be achieved in Oracle JDeveloper and Oracle ADF.
  
  Any help will be much appreciated.
  
  Thank you
  Bilal

  Hello

  You can have a method on the AOS, that is the place where clause to the view of all the objects and run the query.

  Ex:

  public void setWhereClause2AllVOs(String compName){
  this.getVO1().setWhereClause("='" + compName + "'");
  this.getVO1().executeQuery();
  this.getVO2().setWhereClause("='" + compName + "'");
  this.getVO2().executeQuery();
  .....
  }
  

  You can call this method at the start (e.g. as an activity in your workflow by default methodCall)

  Arun-

• See the link to view the objects in different application modules

  Hello
  
  How to create link view (or link if that's the right word) to display the objects belonging to different application modules. Application modules use different database connections. I'm missing something.
  
  Any help is appreciated.
  
  Thank you
  VJ

  You can not do this - but maybe a possibility is to have the VO depend on a variable binding - and pass this variable to a VO to another.

• ApplicationIndicator the value across the icon on native applications

  Hi all

  I work in Bold and Storm with OS 4.6 and 4.7

  I have created an indicator of the Application that displays a value to his side. I set this value with the following line of code: ApplicationIndicatorRegistry.getInstance () .getApplicationIndicator () .setValue (5);

  The problem I have is that this value ("5") appears to the right of the icon of the indicator of demand and in all native applications, the value is displayed on the left of the icon.

  So, I want to display a value in the same way as native applications (left of the icon of the indicator of demand). How can I do? Is this possible?

  Thanks in advance for your help,

  Gabriela.

  The list of API messages does not allow an application to choose how many unread to appear on the side of the indicator image.

• Release of anchor all the objects/text images

  Dear all,

  It's my 1st question on AC (Adobe Community), so I'll explain what I need here in details and excuse me my little or even none experienced in coding, especially in Javascript.

  I have a book with many INDD files, these files have a lot of images and objects and text blocks are anchored to the main text area.

  I searched on AC for the way to free him from all my anchored object and the main text block text block. so I found the average script.

  I found her name "ReleaseAnyAnchor" created by 'Dave Saunders' to release the anchored object (graphics, text, else) but one by one. and it will take too much time to free myself from all the objects on the book. (the Script code is below)

  //DESCRIPTION: Release Inline & Anchored Items
  //Written by Dave Saunders, released on indesignsecrets.com
  
  
  (function() {
    if (app.documents.length > 0 && // must be a document open
    app.selection.length == 1 && // selection must be of single item
    app.selection[0].parent instanceof Character) { // selection must be anchored
    if (parseFloat(app.version) < 6) {
    releaseMe(app.selection[0]);
    } else {
    app.doScript(releaseMe, undefined, app.selection[0], UndoModes.entireScript, "Release Any Anchor");
    }
    } else {
    alert("Please select an inline item.");
    }
  
  
    function releaseMe(myPI) {
    var yePage = findPage(myPI);
    var startBounds = myPI.geometricBounds;
    myPI.anchoredObjectSettings.anchoredPosition = AnchorPosition.anchored;
    myPI.anchoredObjectSettings.releaseAnchoredObject();
    if (yePage != null) {
    myPI.move(yePage);
    }
    myPI.move([startBounds[1], startBounds[0]]);
    }
  
  
    function findPage(theObj) {
    if (theObj.hasOwnProperty("baseline")) {
    theObj = theObj.parentTextFrames[0];
    }
    while (theObj != null) {
    if (theObj.hasOwnProperty("parentPage")) return theObj.parentPage;
    var whatIsIt = theObj.constructor;
    switch (whatIsIt) {
    case Page : return theObj;
    case Character : theObj = theObj.parentTextFrames[0]; break;
    case Cell : theObj = theObj.insertionPoints[0].parentTextFrames[0]; break;
    case Note : ; case Footnote : theObj = theObj.storyOffset; break;
    case Application : return null;
    }
    if (theObj == null) return null;
    theObj = theObj.parent;
    }
    return theObj
    } // end findPage
  
  
  }());
  

  
  

  also, I found another script which release all of the graphic objects, but not objects of text frame. (I get it from AC, but I remember exactly the place where.)

  
  

  if(app.documents.length!=0) {
      var ad = app.activeDocument;
      var pgit = ad.pageItems;
      var pgitlg = pgit.length;
      var objprocessed = 0;
      if(pgitlg !=0)
      {
          for(i=0; i<pgitlg; i++)
          {
              if(pgit[i].getElements()[0].constructor.name == "TextFrame")
              {
                  var tfg = pgit[i].allGraphics;
                  var tfglg = tfg.length;
                  for(j=0; j<tfglg; j++)
                  {
                      var rec = tfg[j].parent;
                      rec.anchoredObjectSettings.releaseAnchoredObject();
                  }
              }
          }
      }
  }
  

  
  

  all codes work well for me, but I need to try to merge or make a new code [as I mentioned that I don't have experiences in JS, so I do not know how to compile a new code that do the 2 steps of the 2 codes.]

  
  

  my request is, could you please help me to do this new code, or merge to compile a new code in the new file.

  
  

  I saw this topic releasing objects anchored and want to make a new script.

  
  

  Please try to help me as soon as POSSIBLE because I need this script to all my object anchored to begin working on the output file.

  
  

  I need the code works on any version of INDESIGN.

  
  

  Thanks guys, waiting for you.

  
  

  AMR
  

  AHA. If you need test whether a line is an anchor. If this is the case, use. releaseAnchoredObject(), if it is not, the simplest is to make an anchor, then release it:

  if (pageItems[i].parent instanceof Character) {
      if (pageItems[i].anchoredObjectSettings.anchoredPosition !== AnchorPosition.ANCHORED) {
          pageItems[i].anchoredObjectSettings.anchoredPosition = AnchorPosition.ANCHORED;
      }
      pageItems[i].anchoredObjectSettings.releaseAnchoredObject();
  }
  

  It works, but I don't know if the results are what you're after.

  Peter

• store the object reference handle (MOR) to synchronize with the virtual center of vSphere

  Hello

  I am able to store a bit in my own DB and assume that they don't change, so that I can match the entities in the virtual centre with those of my database loading my application?

  Document best practices of Balaji Parimi (http://communities.vmware.com/docs/DOC-9912) States:

  Caching of managed object references rather than their
  Properties makes it easy to keep the cache to update. It is easier to maintain
  the cache, as the references remain unchanged until the managed object is removed from the inventory of managed object.

  Because of this comment, I am inclined to believe that I should be able to write the bit on my side in the DB and use them as described.

  Why I ask this is because:

  • It seems that a lot of people is keen to track VMs by uuid.  I'm guessing they are only followed VMs, otherwise they would probably have the same problem I'm having (ex: If a Resource Pool gets renamed while the application is down, how can you identify whether the same as the one you had).

  • The vSphere Web Services SDK Programming Guide seems to be confusing by having a section entitled Do not store Managed Object reference values.  This section seems just to point out that the MOR is not the same between the vCenter server and ESX box.  Because I don't like to manage the host communicating directly with it (and keep track of the GPR in this way), I don't see how this would apply.

  Has anyone been matching their own entities vmware with JAWS?  Is there a reason for (am I wrong something)?  Wouldn't be wonderful if this confusion has been cleared up by Balaji Parimi or VMware themselves.

  Thank you

  Ivan

  The recommendation contained in the best practices doc is right.

  You can store the MOR of an entity in your DB.

  For such objects as hosts, VMs data warehouses, etc... Essentially, this is the unique key that identifies the object.

  And the MOR will change during the lifetime of this object in the DB vCenter.

  The only way it modifies if it removes and adds the object. So for all practical purposes it is a new object anyway.

  What the program guide refers, is the fact that this MOR the 'ID' of the object is only within this system namespace.

  Thus, the VM MOR is unique within the Victoria Cross.

  That MOR are only may not or may not even be object even if you connect directly to the ESX host using the SDK.

  The guide is just trying to clarify that the MOR of a VMS in vCenter isn't the same as if you connect to the ESX host directly.

  That said, if you never connect to the ESX host directly you must not care about this specific recommendation in the guide.

  Hope that clarifies things.

• Brushes bristle pixelated in situs against the importation of "smooth" areas under the objectives of Photoshop

  Sorry about the title of long breath on this point. When I need a contour softened in some parts of an illustration, the gradient mesh option is much too long for me.  No doubt some of you can work the stitch quickly but I think it's a bit of a drag!  When the bristles brushes came, I thought this would be the answer to my problem.  The brushes look great and work just fine.  But when I want to save the file, Adobe advises to rasterize the brushes. Now these areas 'smooth' could have been made in Photoshop and saved out as 'bits' in tif format. Indeed, these special small ares could even be retouched. My client still wants my vector illustrations in the form of PDF files. The funny thing is, if I simply vectorize small parts of my illustration Illustrator, he was still classified as a vector file. If, however, he became an Illustrator file with embedded targets, oddly, looks like 'cheating '.  I'd love to hear your lives on this point, the people.  Thank you in advance.

  I could have created mixtures, but why bother when the blur effect does the job?

  Because often, you really don't want the work to entirely made up of vector traces. In addition, because you have more control over the shape of highlighting / shading and possibility of edit, refine, reshape when you want without restarting and without loss of quality.

  This is where it becomes a question of jurisdiction. For example: while programs like Illustrator has started playing with on-the-fly generated pixelation effects - and even more before long of gradient mesh - Corel Draw (version 8, I think that it is) a photo-realistic vector near Judy Garland of drawing on the cover of his book featured. (It was actually a winner in a contest of Corel). You will find countless examples of this kind of thing that goes back decades and containing nothing else than traces (using graduates and mixes for shading).

  For example, these are completely degraded to focused on the mixture of vector employing no pixelation (effects in live or not) at all:

  

  

  Because these things are applied programmatically, they are build-once /-unlimited use.

  These two images are an example of the variety of raster/vector 'hybrid' (rasterize live effects applied to tracks). They are actually two instances of the drawing "even". The first was done as an experimental demonstration in answer to a question in this forum to draw clouds. The second was a modification of the same file in response to a thread later on drawing of lightning.

  

  

  I didn't not redraw the clouds in the second example. I just modified the. In other words, even if the final result depends on the pixelation effects (blur), these effects are applied, removed and re - apply automatically on-the-fly that I change the underlying traces. I can scale, reorganize, re - stack, recolor, duplicate, reshape these clouds * objects *- and even change the settings of pixelation - without degradation of re-rasterization of the final output.

  This example is the same kind of effects at the level of the raster object to a little bit of the extreme:

  
  The truck was designed entirely as traces in Xara Xtreme (now called Xara Designer Pro). But the vast majority of the thousands of individual paths also have dynamic to the level of objects and rasterized transparency blur (what Xara interface labels feather) applied. It's primary application-to-watchmaking of Xara. Many cases of effects of rasterization in a single Illustrator file would stifle the performance. But I can edit this drawing in real-time in Xara, almost imperceptible performance promptly.

  So in this example, I have the advantages of both worlds: the versatility, scalability, control form and editability traces - and easy quick access to apply graduated frame of transparency (as opposed to mixtures, even if the design has a lot of mixes, too, and even some mixtures in flag).

  JET

• Select only the objects in a rectangle selection

  I am a new user of Illustrator CS5, switching from Freehand. I'm trying to find out if there is a way to select only the objects in a marquee? In AutoCAD, you can make a selection on the left window to the right and only those objects entirely in the window are selected. If you the window right on the left all the objects that are "crossed" or affected by the window are selected. Is there a similar technique in Illustrator?

  Currently, I have to select the objects, and then go back and hold the SHIFT key to deselect the object I don't want, or place objects on different layers and then lock the layers to prevent additional items get selected.

  In AutoCAD, my main program, you simply draw a window selection, left or right, depending on what your next step would be. No special tools or rocking or thinking, that's just the selection primary process and very intuitive.

  I posted a discussion on the Illustrator forum several months ago, which still arouses comments so this seems to be a tool that would be appreciated by many users. Someone posted a script but it has not worked for me yet.

  Thank you for everything that you can do to solve this problem.

  This is a copy of my last post of the original thread. I found some discussions confused because I have no experience in writing or by using scripts. So I copied all the recommendations in a document to read without the comments and digressions. After several hours and a lot of searching on Google I found what solution adapted to my goal, which was a selection process fast and simple with fewer steps to use.

  So, I think I have this job. The following is what I did:

  1 copy the script by Carlos Canto post #11 here:

  http://forums.Adobe.com/thread/856221?start=0&TSTART=0

  2. open the ExtendScript Toolkit Utilities > Adobe utilities - CS5.5 > ExtendScript Toolkit CS5.5 > ExtendScript Toolkit CS5.5.App

  3. when the program opens, paste the script in the large Panel on the left.

  4. then go to file > save as.

  5. that the dialog box click on the arrow next to the save box slot to expand the section options.

  6. next, go to Applications > Adobe Illustrator CS5.1 > Presets > en_US > Scripts.

  7. then, in the Save as box enter a name to identify the script (I named mine Window1).

  8. click on save and close the Toolbox.

  Launch Illustrator and open a drawing.

  1 using the rectangle tool, I drew a rectangle around the objects.

  2. make sure that the new rectangle is selected.

  3. I went to file > Scripts > Window1.

  4A got an error message - error 8705: target layer cannot be changed 25-> iart.selected + true line:

  Oops, you must have ALL unlocked layers.

  5. you click OK.

  6 unlocked all the layers.

  7. my new activated rectangle.

  8. went to file > Scripts > Window1.

  9 here! Items in the rectangle are selected and the rectangle is removed.

  So yes, this script works as requested. Thank you, Carlos.

• Replication of the object read-only?

  Is there a possibility to protect by password, or otherwise put to the replication of the unalterable object similar to the display and publication?

  My concern is that, given total freedom of writeRequestedObject() data, some peers can (voluntarily or not) are used to bad/corrupt data in replication. It will be taken up by others and most replicated. If the data element is part of a larger it itself will be corrupted.

  If there is no way to enforce the read-only, adding a hash of integrity at the end data sounds like a good idea. Receiver will throw the incorrect data and wait for another replica. Which leads to the following question:

  Say a peer is willing to items #1 to #5. When she received #3 a neighbor could this be received again from others until reported (removeWantObjects) that's is more sought or will be the first receive the lock want to #3 and only wait than others. In this case a removeWantObjects followed by addWantObjects will give peer a chance to get a new replica of the #3?

  Thanks for any idea or ideas.

  so that replication of the object to work, everyone in the mesh must be able to NetGroup.writeRequestedObject ().

  in your application logic, you can add integrity checks to the objects (perhaps with a manifesto or a directory that lists the hashes of each object).

  you will not receive an object with a specific index from a peer at a time.  Once you receive the item, its index is removed from your set of envy.  You can perform a check for validity against the object, and if it is not valid, you can re - like it.  at the moment there is no way to blacklist a counterpart of misconduct which gives you damaged data, so you might end up becoming again the same object (corrupt/invalid).

  After receiving an object and determine what it * is * valid, you add it to your game 'a', and then only your neighbors begin to you request for this object.  in this way, only valid objects will be spread across the group.

• I received an error message on my iPad: the application has lost the device context when I try to open the Jam Cookie

  If someone got the error message: "the application has lost the device context? This appeared on my iPad on the application of jam cookie there is a thin red strip across a black screen with the error message locked in the red band. Help!

  Reset the iPad.  Press and hold the power and home together for 10 seconds until the Apple logo appears.